From: Robert Love <robert.w.love@intel.com>
To: James.Bottomley@suse.de, linux-scsi@vger.kernel.org
Cc: Joe Eykholt <jeykholt@cisco.com>
Subject: [PATCH 18/28] fcoe libfcoe: use correct FC-MAP for VN2VN mode
Date: Tue, 20 Jul 2010 15:20:40 -0700 [thread overview]
Message-ID: <20100720222040.17116.62416.stgit@localhost.localdomain> (raw)
In-Reply-To: <20100720221904.17116.78553.stgit@localhost.localdomain>
From: Joe Eykholt <jeykholt@cisco.com>
In VN2VN mode, map_dest means to use the default VN2VN OUI.
Change code that uses the default FCoE OUI to use the one
set in the fcoe_ctlr struct.
Signed-off-by: Joe Eykholt <jeykholt@cisco.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
---
drivers/scsi/fcoe/fcoe.c | 6 ++----
drivers/scsi/fcoe/libfcoe.c | 24 ++++++++++++++++++++----
2 files changed, 22 insertions(+), 8 deletions(-)
diff --git a/drivers/scsi/fcoe/fcoe.c b/drivers/scsi/fcoe/fcoe.c
index 216aba3..4d3e70a 100644
--- a/drivers/scsi/fcoe/fcoe.c
+++ b/drivers/scsi/fcoe/fcoe.c
@@ -1534,11 +1534,9 @@ int fcoe_xmit(struct fc_lport *lport, struct fc_frame *fp)
/* fill up mac and fcoe headers */
eh = eth_hdr(skb);
eh->h_proto = htons(ETH_P_FCOE);
+ memcpy(eh->h_dest, fcoe->ctlr.dest_addr, ETH_ALEN);
if (fcoe->ctlr.map_dest)
- fc_fcoe_set_mac(eh->h_dest, fh->fh_d_id);
- else
- /* insert GW address */
- memcpy(eh->h_dest, fcoe->ctlr.dest_addr, ETH_ALEN);
+ memcpy(eh->h_dest + 3, fh->fh_d_id, 3);
if (unlikely(fcoe->ctlr.flogi_oxid != FC_XID_UNKNOWN))
memcpy(eh->h_source, fcoe->ctlr.ctl_src_addr, ETH_ALEN);
diff --git a/drivers/scsi/fcoe/libfcoe.c b/drivers/scsi/fcoe/libfcoe.c
index 4865e81..4de8ced 100644
--- a/drivers/scsi/fcoe/libfcoe.c
+++ b/drivers/scsi/fcoe/libfcoe.c
@@ -153,6 +153,20 @@ static inline int fcoe_ctlr_fcf_usable(struct fcoe_fcf *fcf)
}
/**
+ * fcoe_ctlr_map_dest() - Set flag and OUI for mapping destination addresses
+ * @fip: The FCoE controller
+ */
+static void fcoe_ctlr_map_dest(struct fcoe_ctlr *fip)
+{
+ if (fip->mode == FIP_MODE_VN2VN)
+ hton24(fip->dest_addr, FIP_VN_FC_MAP);
+ else
+ hton24(fip->dest_addr, FIP_DEF_FC_MAP);
+ hton24(fip->dest_addr + 3, 0);
+ fip->map_dest = 1;
+}
+
+/**
* fcoe_ctlr_init() - Initialize the FCoE Controller instance
* @fip: The FCoE controller to initialize
*/
@@ -345,7 +359,7 @@ static void fcoe_ctlr_reset(struct fcoe_ctlr *fip)
fip->port_ka_time = 0;
fip->sol_time = 0;
fip->flogi_oxid = FC_XID_UNKNOWN;
- fip->map_dest = 0;
+ fcoe_ctlr_map_dest(fip);
}
/**
@@ -573,11 +587,11 @@ int fcoe_ctlr_els_send(struct fcoe_ctlr *fip, struct fc_lport *lport,
fip->flogi_count++;
if (fip->flogi_count < 3)
goto drop;
- fip->map_dest = 1;
+ fcoe_ctlr_map_dest(fip);
return 0;
}
if (fip->state == FIP_ST_NON_FIP)
- fip->map_dest = 1;
+ fcoe_ctlr_map_dest(fip);
}
if (fip->state == FIP_ST_NON_FIP)
@@ -1411,6 +1425,7 @@ static void fcoe_ctlr_timer_work(struct work_struct *work)
"Fibre-Channel Forwarder MAC %pM\n",
fip->lp->host->host_no, sel->fcf_mac);
memcpy(fip->dest_addr, sel->fcf_mac, ETH_ALEN);
+ fip->map_dest = 0;
fip->port_ka_time = jiffies +
msecs_to_jiffies(FIP_VN_KA_PERIOD);
fip->ctlr_ka_time = jiffies + sel->fka_period;
@@ -1527,7 +1542,7 @@ int fcoe_ctlr_recv_flogi(struct fcoe_ctlr *fip, struct fc_lport *lport,
* Otherwise we use the FCoE gateway addr
*/
if (!compare_ether_addr(sa, (u8[6])FC_FCOE_FLOGI_MAC)) {
- fip->map_dest = 1;
+ fcoe_ctlr_map_dest(fip);
} else {
memcpy(fip->dest_addr, sa, ETH_ALEN);
fip->map_dest = 0;
@@ -2426,6 +2441,7 @@ static void fcoe_ctlr_vn_timeout(struct fcoe_ctlr *fip)
new_port_id = fip->port_id;
hton24(mac, FIP_VN_FC_MAP);
hton24(mac + 3, new_port_id);
+ fcoe_ctlr_map_dest(fip);
fip->update_mac(fip->lp, mac);
fcoe_ctlr_vn_send_claim(fip);
next_time = jiffies + msecs_to_jiffies(FIP_VN_ANN_WAIT);
next prev parent reply other threads:[~2010-07-20 22:20 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-07-20 22:19 [PATCH 00/28] libfc, libfcoe and fcoe updates for scsi-misc Robert Love
2010-07-20 22:19 ` [PATCH 01/28] libfc: fix slowpath error from WARN_ON in fc_fcp_send_data Robert Love
2010-07-20 22:19 ` [PATCH 02/28] fcoe: make it possible to verify fcoe with sparse Robert Love
2010-07-20 22:19 ` [PATCH 03/28] libfc: IO errors on link down due to cable unplug Robert Love
2010-07-21 3:29 ` Mike Christie
2010-07-27 21:32 ` Vasu Dev
2010-07-27 22:08 ` Mike Christie
2010-07-28 7:32 ` Mike Christie
2010-07-30 20:34 ` Vasu Dev
2010-07-20 22:19 ` [PATCH 04/28] fcoe: cleans up fcoe_disable and fcoe_enable Robert Love
2010-07-20 22:19 ` [PATCH 05/28] fcoe: adds src and dest mac address checking for fcoe frames Robert Love
2010-07-20 22:19 ` [PATCH 06/28] libfc: convert rport lookup to be RCU safe Robert Love
2010-07-20 22:19 ` [PATCH 07/28] libfc: provide space for LLD after remote port structure Robert Love
2010-07-20 22:19 ` [PATCH 08/28] libfcoe: convert FIP to lock with mutex instead of spin lock Robert Love
2010-07-20 22:19 ` [PATCH 09/28] libfc: add discovery-private pointer for LLD Robert Love
2010-07-20 22:19 ` [PATCH 10/28] libfcoe: fcoe: fnic: change fcoe_ctlr_init interface to specify mode Robert Love
2010-07-20 22:20 ` [PATCH 11/28] libfc: Add local port point-to-multipoint flag Robert Love
2010-07-20 22:20 ` [PATCH 12/28] libfc: add FLOGI state to rport for VN2VN Robert Love
2010-07-20 22:20 ` [PATCH 13/28] libfc: track FIP exchanges Robert Love
2010-07-20 22:20 ` [PATCH 14/28] libfcoe: add protocol description of FIP VN2VN mode Robert Love
2010-07-20 22:20 ` [PATCH 15/28] libfcoe: add state change debugging Robert Love
2010-07-20 22:20 ` [PATCH 16/28] libfcoe: fcoe: fnic: add FIP VN2VN point-to-multipoint support Robert Love
2010-07-20 22:20 ` [PATCH 17/28] libfcoe: Fix FIP ELS encapsulation details for FLOGI responses Robert Love
2010-07-20 22:20 ` Robert Love [this message]
2010-07-20 22:20 ` [PATCH 19/28] fcoe: config via separate create_vn2vn module parameter Robert Love
2010-07-20 22:20 ` [PATCH 20/28] libfc: eliminate rport LOGO state Robert Love
2010-07-20 22:20 ` [PATCH 21/28] libfc: add fc_frame_sid() and fc_frame_did() functions Robert Love
2010-07-20 22:21 ` [PATCH 22/28] libfc: add fc_fill_reply_hdr() and fc_fill_hdr() Robert Love
2010-07-20 22:21 ` [PATCH 23/28] libfc: add interface to allocate a sequence for incoming requests Robert Love
2010-07-20 22:21 ` [PATCH 24/28] libfc: don't require a local exchange " Robert Love
2010-07-20 22:21 ` [PATCH 25/28] fcoe: fix offload feature flag change from netdev Robert Love
2010-07-20 22:21 ` [PATCH 26/28] Revert "[SCSI] fcoe: Fix using VLAN ID in creating lport's WWWN/WWPN" Robert Love
2010-07-20 22:21 ` [PATCH 27/28] libfc: Add retry logic to lport state machine when receiving LS_RJT Robert Love
2010-07-20 22:21 ` [PATCH 28/28] fcoe: remove check for zero fabric name Robert Love
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100720222040.17116.62416.stgit@localhost.localdomain \
--to=robert.w.love@intel.com \
--cc=James.Bottomley@suse.de \
--cc=jeykholt@cisco.com \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).