From: Matthew Wilcox <matthew@wil.cx>
To: Vladislav Bolkhovitin <vst@vlnb.net>
Cc: Pasi K?rkk?inen <pasik@iki.fi>,
Chetan Loke <chetanloke@gmail.com>,
Bart Van Assche <bvanassche@acm.org>,
linux-scsi@vger.kernel.org, linux-kernel@vger.kernel.org,
James Bottomley <James.Bottomley@suse.de>,
scst-devel <scst-devel@lists.sourceforge.net>
Subject: Re: Linux I/O subsystem performance (was: linuxcon 2010...)
Date: Tue, 24 Aug 2010 08:55:22 -0600 [thread overview]
Message-ID: <20100824145522.GQ12892@parisc-linux.org> (raw)
In-Reply-To: <4C73DA91.9040101@vlnb.net>
On Tue, Aug 24, 2010 at 06:43:29PM +0400, Vladislav Bolkhovitin wrote:
> Also it looks very suspicious why nobody even tried to match that
> Microsoft/Intel record, even Intel itself who closely works with Linux
> community in the storage area and could do it using the same hardware.
You seem to be under the impression that "Intel" is some monolithic
entity. Despite working with six different storage & performance
groups within Intel, I have no idea what record you're referring to,
nor what hardware it was accomplished with. Even if I did, I wouldn't
know which group within Intel to contact to see if they still have
the setup. Then I'd have to convince them that it's in their interest
to try to replicate this on Linux. And I'd have to be prepared to sink
a considerable quantity of my time into it ... which I don't have.
--
Matthew Wilcox Intel Open Source Technology Centre
"Bill, look, we understand that you're interested in selling us this
operating system, but compare it to ours. We can't possibly take such
a retrograde step."
next prev parent reply other threads:[~2010-08-24 14:55 UTC|newest]
Thread overview: 82+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-08-18 14:58 [Scst-devel] Fwd: Re: linuxcon 2010 Chetan Loke
2010-08-18 15:11 ` James Bottomley
[not found] ` <AANLkTimJGxn=5kEMH68XVWqFcYG3vpfLjLjZpFGqhG_4@mail.gmail.com>
2010-08-18 15:30 ` Bart Van Assche
2010-08-18 16:04 ` Chetan Loke
2010-08-18 16:18 ` James Bottomley
2010-08-18 17:50 ` Vladislav Bolkhovitin
2010-08-19 1:18 ` jack wang
2010-08-19 21:20 ` Dirk Meister
2010-08-19 22:29 ` Nicholas A. Bellinger
2010-08-21 18:42 ` Vladislav Bolkhovitin
2010-08-21 20:25 ` Nicholas A. Bellinger
2010-08-24 18:08 ` Vladislav Bolkhovitin
2010-08-21 20:43 ` James Bottomley
2010-08-22 7:39 ` Bart Van Assche
2010-08-22 20:29 ` James Bottomley
2010-08-23 13:47 ` Joe Landman
2010-08-23 15:12 ` Bart Van Assche
[not found] ` <AANLkTim-M6dfLvJQnbieFqZCGG33E+-i+u_soCq2p9f1@mail.gmail.com>
2010-08-23 16:07 ` Chetan Loke
2010-08-23 18:03 ` Chetan Loke
2010-08-24 7:25 ` Pasi Kärkkäinen
2010-08-24 14:43 ` Linux I/O subsystem performance (was: linuxcon 2010...) Vladislav Bolkhovitin
2010-08-24 14:55 ` Matthew Wilcox [this message]
2010-08-24 17:51 ` Linux I/O subsystem performance Vladislav Bolkhovitin
2010-08-24 20:40 ` Matthew Wilcox
2010-08-24 14:55 ` [Scst-devel] Fwd: Re: linuxcon 2010 Chetan Loke
[not found] ` <4C7404C4.4040704@vlnb.net>
2010-08-24 20:31 ` Linux I/O subsystem performance (was: linuxcon 2010...) Chris Worley
2010-08-25 19:12 ` Linux I/O subsystem performance Vladislav Bolkhovitin
2010-09-16 15:05 ` Linux I/O subsystem performance (was: linuxcon 2010...) Chris Worley
2010-08-23 19:41 ` [Scst-devel] Fwd: Re: linuxcon 2010 Vladislav Bolkhovitin
2010-08-24 14:41 ` Vladislav Bolkhovitin
2010-08-24 14:51 ` Chris Weiss
2010-08-24 14:56 ` Matthew Wilcox
2010-08-25 22:20 ` Konrad Rzeszutek Wilk
2010-08-25 22:45 ` Ted Ts'o
2010-08-24 14:57 ` James Bottomley
2010-08-24 19:48 ` Vladislav Bolkhovitin
2010-08-24 21:23 ` Nicholas A. Bellinger
2010-08-26 20:11 ` Vladislav Bolkhovitin
2010-08-26 21:23 ` Nicholas A. Bellinger
2010-08-28 17:32 ` Vladislav Bolkhovitin
2010-08-28 20:47 ` Nicholas A. Bellinger
2010-08-30 20:47 ` Vladislav Bolkhovitin
2010-08-30 21:46 ` Nicholas A. Bellinger
2010-09-02 19:38 ` Vladislav Bolkhovitin
2010-09-02 20:25 ` Nicholas A. Bellinger
2010-09-05 20:18 ` Dmitry Torokhov
2010-09-05 21:50 ` Nicholas A. Bellinger
2010-09-05 23:13 ` Mark Deneen
2010-09-06 0:12 ` Nicholas A. Bellinger
2010-09-06 0:58 ` Mark Deneen
2010-09-06 1:34 ` Nicholas A. Bellinger
2010-09-06 5:04 ` Dmitry Torokhov
2010-09-05 23:41 ` Dmitry Torokhov
2010-09-05 23:59 ` Nicholas A. Bellinger
2010-09-06 4:56 ` Dmitry Torokhov
2010-09-06 10:39 ` James Bottomley
2010-09-06 11:02 ` Bart Van Assche
2010-09-06 11:27 ` James Bottomley
2010-09-06 15:26 ` Vladislav Bolkhovitin
2010-09-06 21:47 ` Vladislav Bolkhovitin
2010-09-06 21:55 ` Nicholas A. Bellinger
2010-09-06 22:14 ` david
2010-09-07 0:44 ` Dmitry Torokhov
2010-09-07 3:45 ` Chetan Loke
2010-09-07 6:15 ` Bart Van Assche
2010-09-07 6:08 ` Bart Van Assche
2010-09-07 6:26 ` Dmitry Torokhov
2010-09-07 6:29 ` Hannes Reinecke
2010-09-07 6:45 ` Bart Van Assche
2010-09-07 13:20 ` Vladislav Bolkhovitin
2010-09-07 20:14 ` Vladislav Bolkhovitin
2010-09-07 20:14 ` Vladislav Bolkhovitin
2010-09-06 21:16 ` Greg KH
2010-09-06 17:28 ` Chetan Loke
2010-09-06 21:52 ` Vladislav Bolkhovitin
2010-08-20 13:46 ` Ruben Laban
2010-08-18 17:51 ` Chetan Loke
2010-08-18 16:19 ` Bart Van Assche
2010-08-18 16:28 ` Joe Landman
2010-08-18 17:52 ` Vladislav Bolkhovitin
2010-08-18 15:12 ` Chetan Loke
2010-08-18 17:52 ` Vladislav Bolkhovitin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100824145522.GQ12892@parisc-linux.org \
--to=matthew@wil.cx \
--cc=James.Bottomley@suse.de \
--cc=bvanassche@acm.org \
--cc=chetanloke@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=pasik@iki.fi \
--cc=scst-devel@lists.sourceforge.net \
--cc=vst@vlnb.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).