From: Benjamin LaHaise <bcrl@kvack.org>
To: linux-scsi@vger.kernel.org
Subject: [RFC/PATCH] add PCI id for HighPoint RocketRAID 2720 to mvsas
Date: Wed, 20 Oct 2010 18:31:10 -0400 [thread overview]
Message-ID: <20101020223110.GT2315@kvack.org> (raw)
Hi folks,
I recently built a system using the HighPoint 2720 SAS controller, which
is based on the Marvell 88SE9485. In my limited testing (read: it boots),
the following patch is needed to get mvsas to recognize the board. With
this patch, the system boots without issue and SATA passthrough seems to
work. Note that I have not tested the board with any SAS drives, as I
only have SATA drives at present. Any thoughts/comments on if anything
further is needed for this board?
Signed-off-by: Benjamin LaHaise <bcrl@kvack.org>
diff --git a/drivers/scsi/mvsas/mv_init.c b/drivers/scsi/mvsas/mv_init.c
index 19ad34f..4590faa 100644
--- a/drivers/scsi/mvsas/mv_init.c
+++ b/drivers/scsi/mvsas/mv_init.c
@@ -648,6 +648,15 @@ static struct pci_device_id __devinitdata mvs_pci_table[] = {
{ PCI_VDEVICE(MARVELL, 0x6320), chip_6320 },
{ PCI_VDEVICE(MARVELL, 0x6340), chip_6440 },
+ { /* HighPoint RocketRAID 2720 */
+ .vendor = 0x1103,
+ .device = 0x2720,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = 0x0000,
+ .class = 0,
+ .class_mask = 0,
+ .driver_data = chip_1320,
+ },
{
.vendor = PCI_VENDOR_ID_MARVELL,
.device = 0x6440,
.subvendor = PCI_ANY_ID,
next reply other threads:[~2010-10-20 23:05 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-10-20 22:31 Benjamin LaHaise [this message]
2010-10-29 2:24 ` [RFC/PATCH] add PCI id for HighPoint RocketRAID 2720 to mvsas Benjamin LaHaise
2010-10-29 5:23 ` Ron Pitts
2010-10-29 5:37 ` Benjamin LaHaise
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20101020223110.GT2315@kvack.org \
--to=bcrl@kvack.org \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).