[PATCH take 2] [USB] Use normalized sense when emulating autosense

Luben Tuikov
2010-10-22T21:12:53Z

This patch solves two things:
1) Enables autosense emulation code to correctly
interpret descriptor format sense data, and
2) Fixes a bug whereby the autosense emulation
code would overwrite descriptor format sense data
with SENSE KEY HARDWARE ERROR in fixed format, to
incorrectly look like this:

Oct 21 14:11:07 localhost kernel: sd 7:0:0:0: [sdc] Sense Key : Recovered Error [current] [descriptor]
Oct 21 14:11:07 localhost kernel: Descriptor sense data with sense descriptors (in hex):
Oct 21 14:11:07 localhost kernel: 72 01 04 1d 00 00 00 0e 09 0c 00 00 00 00 00 00
Oct 21 14:11:07 localhost kernel: 00 4f 00 c2 00 50
Oct 21 14:11:07 localhost kernel: sd 7:0:0:0: [sdc] ASC=0x4 ASCQ=0x1d

Signed-off-by: Luben Tuikov <ltuikov@yahoo.com>
---
drivers/usb/storage/transport.c | 34 +++++++++++++++++++---------------
1 files changed, 19 insertions(+), 15 deletions(-)

diff --git a/drivers/usb/storage/transport.c b/drivers/usb/storage/transport.c
index 64ec073..cb04664 100644
--- a/drivers/usb/storage/transport.c
+++ b/drivers/usb/storage/transport.c
@@ -691,6 +691,9 @@ void usb_stor_invoke_transport(struct scsi_cmnd *srb, struct us_data *us)
int temp_result;
struct scsi_eh_save ses;
int sense_size = US_SENSE_SIZE;
+ struct scsi_sense_hdr sshdr;
+ const u8 *scdd;
+ u8 fm_ili;

/* device supports and needs bigger sense buffer */
if (us->fflags & US_FL_SANE_SENSE)
@@ -774,32 +777,30 @@ Retry_Sense:
srb->sense_buffer[7] = (US_SENSE_SIZE - 8);
}

+ scsi_normalize_sense(srb->sense_buffer, SCSI_SENSE_BUFFERSIZE,
+ &sshdr);
+
US_DEBUGP("-- Result from auto-sense is %d\n", temp_result);
US_DEBUGP("-- code: 0x%x, key: 0x%x, ASC: 0x%x, ASCQ: 0x%x\n",
- srb->sense_buffer[0],
- srb->sense_buffer[2] & 0xf,
- srb->sense_buffer[12],
- srb->sense_buffer[13]);
+ sshdr.response_code, sshdr.sense_key,
+ sshdr.asc, sshdr.ascq);
#ifdef CONFIG_USB_STORAGE_DEBUG
- usb_stor_show_sense(
- srb->sense_buffer[2] & 0xf,
- srb->sense_buffer[12],
- srb->sense_buffer[13]);
+ usb_stor_show_sense(sshdr.sense_key, sshdr.asc, sshdr.ascq);
#endif

/* set the result so the higher layers expect this data */
srb->result = SAM_STAT_CHECK_CONDITION;

+ scdd = scsi_sense_desc_find(srb->sense_buffer,
+ SCSI_SENSE_BUFFERSIZE, 4);
+ fm_ili = (scdd ? scdd[3] : srb->sense_buffer[2]) & 0xA0;
+
/* We often get empty sense data. This could indicate that
* everything worked or that there was an unspecified
* problem. We have to decide which.
*/
- if ( /* Filemark 0, ignore EOM, ILI 0, no sense */
- (srb->sense_buffer[2] & 0xaf) == 0 &&
- /* No ASC or ASCQ */
- srb->sense_buffer[12] == 0 &&
- srb->sense_buffer[13] == 0) {
-
+ if (sshdr.sense_key == 0 && sshdr.asc == 0 && sshdr.ascq == 0 &&
+ fm_ili == 0) {
/* If things are really okay, then let's show that.
* Zero out the sense buffer so the higher layers
* won't realize we did an unsolicited auto-sense.
@@ -814,7 +815,10 @@ Retry_Sense:
*/
} else {
srb->result = DID_ERROR << 16;
- srb->sense_buffer[2] = HARDWARE_ERROR;
+ if ((sshdr.response_code & 0x72) == 0x72)
+ srb->sense_buffer[1] = HARDWARE_ERROR;
+ else
+ srb->sense_buffer[2] = HARDWARE_ERROR;
}
}
}
--
1.7.0.1