From: Arkadiusz Miskiewicz <a.miskiewicz@gmail.com>
To: Eric Moore <Eric.Moore@lsi.com>
Cc: DL-MPTFusionLinux@lsi.com, linux-scsi@vger.kernel.org
Subject: Re: missing mptsas support for LSI Logic / Symbios Logic SAS1068 PCI-X Fusion-MPT SAS [1000:0055] (rev 02)
Date: Fri, 19 Nov 2010 19:39:07 +0100 [thread overview]
Message-ID: <201011191939.07573.a.miskiewicz@gmail.com> (raw)
In-Reply-To: <201011191842.25939.a.miskiewicz@gmail.com>
On Friday 19 of November 2010, Arkadiusz Miskiewicz wrote:
> Hi,
>
> I wonder if mptsas driver is able to support this hardware?
>
> 04:08.0 SCSI storage controller [0100]: LSI Logic / Symbios Logic SAS1068
> PCI- X Fusion-MPT SAS [1000:0055] (rev 02)
> Subsystem: Intel Corporation Device [8086:3504]
>
> Currently driver doesn't handle 1000:0055 pciid. The problem seems quite
> old since I found someone asking for it long time ago
> http://lkml.org/lkml/2007/1/23/87
[root@rescue mptsas]# echo 1000 0055 > new_id
[root@rescue mptsas]#
drives were detected, I was able to create filesystem, write, read few files
and these short tests worked well.
So I wonder what's the case with it not being added to mptsas driver? Thanks.
[ 5689.436551] mptsas 0000:04:08.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 5689.436886] mptbase: ioc0: Initiating bringup
[ 5690.042770] ioc0: : Capabilities={Initiator}
[ 5699.421066] scsi8 : ioc0: , FwRev=01120000h, Ports=1, MaxQ=511, IRQ=16
[ 5699.458704] mptsas: ioc0: attaching sata device: fw_channel 0, fw_id 0, phy 0, sas_addr 0x1221000000000000
[ 5699.461495] scsi 8:0:0:0: Direct-Access ATA ST9500420AS SDM1 PQ: 0 ANSI: 5
[ 5699.465182] sd 8:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 5699.465822] mptsas: ioc0: attaching sata device: fw_channel 0, fw_id 1, phy 1, sas_addr 0x1221000001000000
[ 5699.466599] sd 8:0:0:0: Attached scsi generic sg0 type 0
[ 5699.469232] scsi 8:0:1:0: Direct-Access ATA ST9500420AS SDM1 PQ: 0 ANSI: 5
[ 5699.471140] sd 8:0:1:0: Attached scsi generic sg1 type 0
[ 5699.472842] sd 8:0:1:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 5699.801422] sd 8:0:0:0: [sda] Write Protect is off
[ 5699.801425] sd 8:0:0:0: [sda] Mode Sense: 73 00 00 08
[ 5699.806427] sd 8:0:1:0: [sdb] Write Protect is off
[ 5699.806431] sd 8:0:1:0: [sdb] Mode Sense: 73 00 00 08
[ 5699.822024] sd 8:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5699.827135] sd 8:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5699.928108] sda:
[ 5699.933163] sdb: unknown partition table
[ 5699.962440] unknown partition table
[ 5700.068369] sd 8:0:0:0: [sda] Attached SCSI disk
[ 5700.073759] sd 8:0:1:0: [sdb] Attached SCSI disk
--
Arkadiusz Miśkiewicz PLD/Linux Team
arekm / maven.pl http://ftp.pld-linux.org/
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2010-11-19 18:39 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-11-19 17:42 missing mptsas support for LSI Logic / Symbios Logic SAS1068 PCI-X Fusion-MPT SAS [1000:0055] (rev 02) Arkadiusz Miskiewicz
2010-11-19 18:39 ` Arkadiusz Miskiewicz [this message]
2010-11-19 20:15 ` Unrein, Jason
2010-11-19 20:30 ` Arkadiusz Miskiewicz
2010-11-19 20:37 ` Unrein, Jason
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201011191939.07573.a.miskiewicz@gmail.com \
--to=a.miskiewicz@gmail.com \
--cc=DL-MPTFusionLinux@lsi.com \
--cc=Eric.Moore@lsi.com \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox