From: Robert Love <robert.w.love@intel.com>
To: James.Bottomley@suse.de, linux-scsi@vger.kernel.org
Cc: Joe Eykholt <jeykholt@cisco.com>
Subject: [PATCH 10/28] libfc: add hook for FC-4 provider registration
Date: Fri, 28 Jan 2011 16:04:02 -0800 [thread overview]
Message-ID: <20110129000402.1784.43277.stgit@localhost6.localdomain6> (raw)
In-Reply-To: <20110129000310.1784.58748.stgit@localhost6.localdomain6>
From: Joe Eykholt <jeykholt@cisco.com>
Allow FC-4 provider modules to hook into libfc, mostly for targets.
This should allow any FC-4 module to handle PRLI requests and maintain
process-association states.
Each provider registers its ops with libfc and then will be called for
any incoming PRLI for that FC-4 type on any instance. The provider
can decide whether to handle that particular instance using any method
it likes, such as ACLs or other configuration information.
A count is kept of the number of successful PRLIs from the remote port.
Providers are called back with an implicit PRLO when the remote port
is about to be deleted or has been reset.
fc_lport_recv_req() now sends incoming FC-4 requests to FC-4 providers,
and there is a built-in provider always registered for handling
incoming ELS requests.
The call to provider recv() routines uses rcu_read_lock()
so that providers aren't removed during the call. That lock is very
cheap and shouldn't affect any performance on ELS requests.
Providers can rely on the RCU lock to protect a session lookup as well.
Signed-off-by: Joe Eykholt <jeykholt@cisco.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
---
drivers/scsi/libfc/fc_libfc.c | 60 ++++++++++++++++++
drivers/scsi/libfc/fc_libfc.h | 11 +++
drivers/scsi/libfc/fc_lport.c | 65 +++++++++++++++++---
drivers/scsi/libfc/fc_rport.c | 133 +++++++++++++++++++++++++++++++++--------
include/scsi/libfc.h | 26 ++++++++
5 files changed, 259 insertions(+), 36 deletions(-)
diff --git a/drivers/scsi/libfc/fc_libfc.c b/drivers/scsi/libfc/fc_libfc.c
index 6a48c28..ae3abef 100644
--- a/drivers/scsi/libfc/fc_libfc.c
+++ b/drivers/scsi/libfc/fc_libfc.c
@@ -35,6 +35,23 @@ unsigned int fc_debug_logging;
module_param_named(debug_logging, fc_debug_logging, int, S_IRUGO|S_IWUSR);
MODULE_PARM_DESC(debug_logging, "a bit mask of logging levels");
+DEFINE_MUTEX(fc_prov_mutex);
+
+/*
+ * Providers which primarily send requests and PRLIs.
+ */
+struct fc4_prov *fc_active_prov[FC_FC4_PROV_SIZE] = {
+ [0] = &fc_rport_t0_prov,
+ [FC_TYPE_FCP] = &fc_rport_fcp_init,
+};
+
+/*
+ * Providers which receive requests.
+ */
+struct fc4_prov *fc_passive_prov[FC_FC4_PROV_SIZE] = {
+ [FC_TYPE_ELS] = &fc_lport_els_prov,
+};
+
/**
* libfc_init() - Initialize libfc.ko
*/
@@ -210,3 +227,46 @@ void fc_fill_reply_hdr(struct fc_frame *fp, const struct fc_frame *in_fp,
fc_fill_hdr(fp, in_fp, r_ctl, FC_FCTL_RESP, 0, parm_offset);
}
EXPORT_SYMBOL(fc_fill_reply_hdr);
+
+/**
+ * fc_fc4_register_provider() - register FC-4 upper-level provider.
+ * @type: FC-4 type, such as FC_TYPE_FCP
+ * @prov: structure describing provider including ops vector.
+ *
+ * Returns 0 on success, negative error otherwise.
+ */
+int fc_fc4_register_provider(enum fc_fh_type type, struct fc4_prov *prov)
+{
+ struct fc4_prov **prov_entry;
+ int ret = 0;
+
+ if (type >= FC_FC4_PROV_SIZE)
+ return -EINVAL;
+ mutex_lock(&fc_prov_mutex);
+ prov_entry = (prov->recv ? fc_passive_prov : fc_active_prov) + type;
+ if (*prov_entry)
+ ret = -EBUSY;
+ else
+ *prov_entry = prov;
+ mutex_unlock(&fc_prov_mutex);
+ return ret;
+}
+EXPORT_SYMBOL(fc_fc4_register_provider);
+
+/**
+ * fc_fc4_deregister_provider() - deregister FC-4 upper-level provider.
+ * @type: FC-4 type, such as FC_TYPE_FCP
+ * @prov: structure describing provider including ops vector.
+ */
+void fc_fc4_deregister_provider(enum fc_fh_type type, struct fc4_prov *prov)
+{
+ BUG_ON(type >= FC_FC4_PROV_SIZE);
+ mutex_lock(&fc_prov_mutex);
+ if (prov->recv)
+ rcu_assign_pointer(fc_passive_prov[type], NULL);
+ else
+ rcu_assign_pointer(fc_active_prov[type], NULL);
+ mutex_unlock(&fc_prov_mutex);
+ synchronize_rcu();
+}
+EXPORT_SYMBOL(fc_fc4_deregister_provider);
diff --git a/drivers/scsi/libfc/fc_libfc.h b/drivers/scsi/libfc/fc_libfc.h
index eea0c35..205de28 100644
--- a/drivers/scsi/libfc/fc_libfc.h
+++ b/drivers/scsi/libfc/fc_libfc.h
@@ -94,6 +94,17 @@ extern unsigned int fc_debug_logging;
(lport)->host->host_no, ##args))
/*
+ * FC-4 Providers.
+ */
+extern struct fc4_prov *fc_active_prov[]; /* providers without recv */
+extern struct fc4_prov *fc_passive_prov[]; /* providers with recv */
+extern struct mutex fc_prov_mutex; /* lock over table changes */
+
+extern struct fc4_prov fc_rport_t0_prov; /* type 0 provider */
+extern struct fc4_prov fc_lport_els_prov; /* ELS provider */
+extern struct fc4_prov fc_rport_fcp_init; /* FCP initiator provider */
+
+/*
* Set up direct-data placement for this I/O request
*/
void fc_fcp_ddp_setup(struct fc_fcp_pkt *fsp, u16 xid);
diff --git a/drivers/scsi/libfc/fc_lport.c b/drivers/scsi/libfc/fc_lport.c
index c5a10f9..e2cd087 100644
--- a/drivers/scsi/libfc/fc_lport.c
+++ b/drivers/scsi/libfc/fc_lport.c
@@ -849,7 +849,7 @@ out:
}
/**
- * fc_lport_recv_req() - The generic lport request handler
+ * fc_lport_recv_els_req() - The generic lport ELS request handler
* @lport: The local port that received the request
* @fp: The request frame
*
@@ -859,9 +859,9 @@ out:
* Locking Note: This function should not be called with the lport
* lock held becuase it will grab the lock.
*/
-static void fc_lport_recv_req(struct fc_lport *lport, struct fc_frame *fp)
+static void fc_lport_recv_els_req(struct fc_lport *lport,
+ struct fc_frame *fp)
{
- struct fc_frame_header *fh = fc_frame_header_get(fp);
void (*recv)(struct fc_lport *, struct fc_frame *);
mutex_lock(&lport->lp_mutex);
@@ -873,8 +873,7 @@ static void fc_lport_recv_req(struct fc_lport *lport, struct fc_frame *fp)
*/
if (!lport->link_up)
fc_frame_free(fp);
- else if (fh->fh_type == FC_TYPE_ELS &&
- fh->fh_r_ctl == FC_RCTL_ELS_REQ) {
+ else {
/*
* Check opcode.
*/
@@ -903,14 +902,62 @@ static void fc_lport_recv_req(struct fc_lport *lport, struct fc_frame *fp)
}
recv(lport, fp);
- } else {
- FC_LPORT_DBG(lport, "dropping invalid frame (eof %x)\n",
- fr_eof(fp));
- fc_frame_free(fp);
}
mutex_unlock(&lport->lp_mutex);
}
+static int fc_lport_els_prli(struct fc_rport_priv *rdata, u32 spp_len,
+ const struct fc_els_spp *spp_in,
+ struct fc_els_spp *spp_out)
+{
+ return FC_SPP_RESP_INVL;
+}
+
+struct fc4_prov fc_lport_els_prov = {
+ .prli = fc_lport_els_prli,
+ .recv = fc_lport_recv_els_req,
+};
+
+/**
+ * fc_lport_recv_req() - The generic lport request handler
+ * @lport: The lport that received the request
+ * @fp: The frame the request is in
+ *
+ * Locking Note: This function should not be called with the lport
+ * lock held becuase it may grab the lock.
+ */
+static void fc_lport_recv_req(struct fc_lport *lport,
+ struct fc_frame *fp)
+{
+ struct fc_frame_header *fh = fc_frame_header_get(fp);
+ struct fc_seq *sp = fr_seq(fp);
+ struct fc4_prov *prov;
+
+ /*
+ * Use RCU read lock and module_lock to be sure module doesn't
+ * deregister and get unloaded while we're calling it.
+ * try_module_get() is inlined and accepts a NULL parameter.
+ * Only ELSes and FCP target ops should come through here.
+ * The locking is unfortunate, and a better scheme is being sought.
+ */
+
+ rcu_read_lock();
+ if (fh->fh_type >= FC_FC4_PROV_SIZE)
+ goto drop;
+ prov = rcu_dereference(fc_passive_prov[fh->fh_type]);
+ if (!prov || !try_module_get(prov->module))
+ goto drop;
+ rcu_read_unlock();
+ prov->recv(lport, fp);
+ module_put(prov->module);
+ return;
+drop:
+ rcu_read_unlock();
+ FC_LPORT_DBG(lport, "dropping unexpected frame type %x\n", fh->fh_type);
+ fc_frame_free(fp);
+ lport->tt.exch_done(sp);
+}
+
/**
* fc_lport_reset() - Reset a local port
* @lport: The local port which should be reset
diff --git a/drivers/scsi/libfc/fc_rport.c b/drivers/scsi/libfc/fc_rport.c
index 309e3e7..a92954c 100644
--- a/drivers/scsi/libfc/fc_rport.c
+++ b/drivers/scsi/libfc/fc_rport.c
@@ -257,6 +257,8 @@ static void fc_rport_work(struct work_struct *work)
struct fc_rport_operations *rport_ops;
struct fc_rport_identifiers ids;
struct fc_rport *rport;
+ struct fc4_prov *prov;
+ u8 type;
mutex_lock(&rdata->rp_mutex);
event = rdata->event;
@@ -306,6 +308,15 @@ static void fc_rport_work(struct work_struct *work)
case RPORT_EV_FAILED:
case RPORT_EV_LOGO:
case RPORT_EV_STOP:
+ if (rdata->prli_count) {
+ mutex_lock(&fc_prov_mutex);
+ for (type = 1; type < FC_FC4_PROV_SIZE; type++) {
+ prov = fc_passive_prov[type];
+ if (prov && prov->prlo)
+ prov->prlo(rdata);
+ }
+ mutex_unlock(&fc_prov_mutex);
+ }
port_id = rdata->ids.port_id;
mutex_unlock(&rdata->rp_mutex);
@@ -1643,9 +1654,9 @@ static void fc_rport_recv_prli_req(struct fc_rport_priv *rdata,
unsigned int len;
unsigned int plen;
enum fc_els_spp_resp resp;
+ enum fc_els_spp_resp passive;
struct fc_seq_els_data rjt_data;
- u32 fcp_parm;
- u32 roles = FC_RPORT_ROLE_UNKNOWN;
+ struct fc4_prov *prov;
FC_RPORT_DBG(rdata, "Received PRLI request while in state %s\n",
fc_rport_state(rdata));
@@ -1679,46 +1690,41 @@ static void fc_rport_recv_prli_req(struct fc_rport_priv *rdata,
pp->prli.prli_len = htons(len);
len -= sizeof(struct fc_els_prli);
- /* reinitialize remote port roles */
- rdata->ids.roles = FC_RPORT_ROLE_UNKNOWN;
-
/*
* Go through all the service parameter pages and build
* response. If plen indicates longer SPP than standard,
* use that. The entire response has been pre-cleared above.
*/
spp = &pp->spp;
+ mutex_lock(&fc_prov_mutex);
while (len >= plen) {
spp->spp_type = rspp->spp_type;
spp->spp_type_ext = rspp->spp_type_ext;
- spp->spp_flags = rspp->spp_flags & FC_SPP_EST_IMG_PAIR;
- resp = FC_SPP_RESP_ACK;
-
- switch (rspp->spp_type) {
- case 0: /* common to all FC-4 types */
- break;
- case FC_TYPE_FCP:
- fcp_parm = ntohl(rspp->spp_params);
- if (fcp_parm & FCP_SPPF_RETRY)
- rdata->flags |= FC_RP_FLAGS_RETRY;
- rdata->supported_classes = FC_COS_CLASS3;
- if (fcp_parm & FCP_SPPF_INIT_FCN)
- roles |= FC_RPORT_ROLE_FCP_INITIATOR;
- if (fcp_parm & FCP_SPPF_TARG_FCN)
- roles |= FC_RPORT_ROLE_FCP_TARGET;
- rdata->ids.roles = roles;
-
- spp->spp_params = htonl(lport->service_params);
- break;
- default:
- resp = FC_SPP_RESP_INVL;
- break;
+ resp = 0;
+
+ if (rspp->spp_type < FC_FC4_PROV_SIZE) {
+ prov = fc_active_prov[rspp->spp_type];
+ if (prov)
+ resp = prov->prli(rdata, plen, rspp, spp);
+ prov = fc_passive_prov[rspp->spp_type];
+ if (prov) {
+ passive = prov->prli(rdata, plen, rspp, spp);
+ if (!resp || passive == FC_SPP_RESP_ACK)
+ resp = passive;
+ }
+ }
+ if (!resp) {
+ if (spp->spp_flags & FC_SPP_EST_IMG_PAIR)
+ resp |= FC_SPP_RESP_CONF;
+ else
+ resp |= FC_SPP_RESP_INVL;
}
spp->spp_flags |= resp;
len -= plen;
rspp = (struct fc_els_spp *)((char *)rspp + plen);
spp = (struct fc_els_spp *)((char *)spp + plen);
}
+ mutex_unlock(&fc_prov_mutex);
/*
* Send LS_ACC. If this fails, the originator should retry.
@@ -1888,6 +1894,79 @@ int fc_rport_init(struct fc_lport *lport)
EXPORT_SYMBOL(fc_rport_init);
/**
+ * fc_rport_fcp_prli() - Handle incoming PRLI for the FCP initiator.
+ * @rdata: remote port private
+ * @spp_len: service parameter page length
+ * @rspp: received service parameter page
+ * @spp: response service parameter page
+ *
+ * Returns the value for the response code to be placed in spp_flags;
+ * Returns 0 if not an initiator.
+ */
+static int fc_rport_fcp_prli(struct fc_rport_priv *rdata, u32 spp_len,
+ const struct fc_els_spp *rspp,
+ struct fc_els_spp *spp)
+{
+ struct fc_lport *lport = rdata->local_port;
+ u32 fcp_parm;
+
+ fcp_parm = ntohl(rspp->spp_params);
+ rdata->ids.roles = FC_RPORT_ROLE_UNKNOWN;
+ if (fcp_parm & FCP_SPPF_INIT_FCN)
+ rdata->ids.roles |= FC_RPORT_ROLE_FCP_INITIATOR;
+ if (fcp_parm & FCP_SPPF_TARG_FCN)
+ rdata->ids.roles |= FC_RPORT_ROLE_FCP_TARGET;
+ if (fcp_parm & FCP_SPPF_RETRY)
+ rdata->flags |= FC_RP_FLAGS_RETRY;
+ rdata->supported_classes = FC_COS_CLASS3;
+
+ if (!(lport->service_params & FC_RPORT_ROLE_FCP_INITIATOR))
+ return 0;
+
+ spp->spp_flags |= rspp->spp_flags & FC_SPP_EST_IMG_PAIR;
+
+ /*
+ * OR in our service parameters with other providers (target), if any.
+ */
+ fcp_parm = ntohl(spp->spp_params);
+ spp->spp_params = htonl(fcp_parm | lport->service_params);
+ return FC_SPP_RESP_ACK;
+}
+
+/*
+ * FC-4 provider ops for FCP initiator.
+ */
+struct fc4_prov fc_rport_fcp_init = {
+ .prli = fc_rport_fcp_prli,
+};
+
+/**
+ * fc_rport_t0_prli() - Handle incoming PRLI parameters for type 0
+ * @rdata: remote port private
+ * @spp_len: service parameter page length
+ * @rspp: received service parameter page
+ * @spp: response service parameter page
+ */
+static int fc_rport_t0_prli(struct fc_rport_priv *rdata, u32 spp_len,
+ const struct fc_els_spp *rspp,
+ struct fc_els_spp *spp)
+{
+ if (rspp->spp_flags & FC_SPP_EST_IMG_PAIR)
+ return FC_SPP_RESP_INVL;
+ return FC_SPP_RESP_ACK;
+}
+
+/*
+ * FC-4 provider ops for type 0 service parameters.
+ *
+ * This handles the special case of type 0 which is always successful
+ * but doesn't do anything otherwise.
+ */
+struct fc4_prov fc_rport_t0_prov = {
+ .prli = fc_rport_t0_prli,
+};
+
+/**
* fc_setup_rport() - Initialize the rport_event_queue
*/
int fc_setup_rport(void)
diff --git a/include/scsi/libfc.h b/include/scsi/libfc.h
index f53c8e3..3ae2a76 100644
--- a/include/scsi/libfc.h
+++ b/include/scsi/libfc.h
@@ -35,6 +35,8 @@
#include <scsi/fc_frame.h>
+#define FC_FC4_PROV_SIZE (FC_TYPE_FCP + 1) /* size of tables */
+
/*
* libfc error codes
*/
@@ -179,6 +181,7 @@ struct fc_rport_libfc_priv {
* @rp_mutex: The mutex that protects the remote port
* @retry_work: Handle for retries
* @event_callback: Callback when READY, FAILED or LOGO states complete
+ * @prli_count: Count of open PRLI sessions in providers
* @rcu: Structure used for freeing in an RCU-safe manner
*/
struct fc_rport_priv {
@@ -202,6 +205,7 @@ struct fc_rport_priv {
struct list_head peers;
struct work_struct event_work;
u32 supported_classes;
+ u16 prli_count;
struct rcu_head rcu;
};
@@ -848,6 +852,28 @@ struct fc_lport {
struct delayed_work retry_work;
};
+/**
+ * struct fc4_prov - FC-4 provider registration
+ * @prli: Handler for incoming PRLI
+ * @prlo: Handler for session reset
+ * @recv: Handler for incoming request
+ * @module: Pointer to module. May be NULL.
+ */
+struct fc4_prov {
+ int (*prli)(struct fc_rport_priv *, u32 spp_len,
+ const struct fc_els_spp *spp_in,
+ struct fc_els_spp *spp_out);
+ void (*prlo)(struct fc_rport_priv *);
+ void (*recv)(struct fc_lport *, struct fc_frame *);
+ struct module *module;
+};
+
+/*
+ * Register FC-4 provider with libfc.
+ */
+int fc_fc4_register_provider(enum fc_fh_type type, struct fc4_prov *);
+void fc_fc4_deregister_provider(enum fc_fh_type type, struct fc4_prov *);
+
/*
* FC_LPORT HELPER FUNCTIONS
*****************************/
next prev parent reply other threads:[~2011-01-29 0:04 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-01-29 0:03 [PATCH 00/28] libfc/libfcoe/fcoe updates for scsi-misc (2.6.39) Robert Love
2011-01-29 0:03 ` [PATCH 01/28] libfc: always initialize the FCoE DDP exchange id for fsp as FC_XID_UNKNOWN Robert Love
2011-01-29 0:03 ` [PATCH 02/28] libfc: Return a valid return code in fc_fcp_pkt_abort() Robert Love
2011-01-29 0:03 ` [PATCH 03/28] libfc: Cleanup return paths in fc_rport_error_retry Robert Love
2011-01-29 0:03 ` [PATCH 04/28] libfc: dereferencing ERR_PTR in fc_tm_done() Robert Love
2011-01-29 0:03 ` [PATCH 05/28] fnic: fix memory leak Robert Love
2011-01-29 0:03 ` [PATCH 06/28] fnic: Bumping up fnic version from 1.4.0.145 to 1.5.0.1 Robert Love
2011-01-29 0:03 ` [PATCH 07/28] fcoe: Fix module reference count for vports Robert Love
2011-01-29 0:03 ` [PATCH 08/28] fcoe: drop FCoE LOGO in FIP mode Robert Love
2011-01-29 0:03 ` [PATCH 09/28] libfc: fix sparse static and non-ANSI warnings Robert Love
2011-01-29 0:04 ` Robert Love [this message]
2011-01-29 0:04 ` [PATCH 11/28] libfc: add method for setting handler for incoming exchange Robert Love
2011-01-29 0:04 ` [PATCH 12/28] libfc: add local port hook for provider session lookup Robert Love
2011-01-29 0:04 ` [PATCH 13/28] libfc: add hook to notify providers of local port changes Robert Love
2011-01-29 0:04 ` [PATCH 14/28] libfc: use PRLI hook to get parameters when sending outgoing PRLI Robert Love
2011-01-29 0:04 ` [PATCH 15/28] libfc: Remove usage of the Scsi_Host's host_lock Robert Love
2011-01-29 0:04 ` [PATCH 16/28] libfc: export seq_release() for users of seq_assign() Robert Love
2011-01-29 0:04 ` [PATCH 17/28] libfc: Enhanced exchange ID selection mechanism and fix related EMA selection logic Robert Love
2011-01-29 0:04 ` [PATCH 18/28] libfcoe: move logging macros into the local libfcoe.h header file Robert Love
2011-01-29 0:04 ` [PATCH 19/28] libfcoe: add fcoe_transport structure defines to include/scsi/libfcoe.h Robert Love
2011-01-29 0:04 ` [PATCH 20/28] libfcoe: add implementation to support fcoe transport Robert Love
2011-02-02 6:43 ` Mike Christie
2011-02-03 2:13 ` Robert Love
2011-01-29 0:05 ` [PATCH 21/28] libfcoe: rename libfcoe.c to fcoe_cltr.c for the coming fcoe_transport.c Robert Love
2011-01-29 0:05 ` [PATCH 22/28] libfcoe: include fcoe_transport.c into kernel libfcoe module Robert Love
2011-01-29 0:05 ` [PATCH 23/28] fcoe: prepare fcoe for using fcoe transport Robert Love
2011-01-29 0:05 ` [PATCH 24/28] fcoe: convert fcoe.ko to become an fcoe transport provider driver Robert Love
2011-01-29 0:05 ` [PATCH 25/28] libfc: Extending lport's roles for target if there is a registered target Robert Love
2011-01-29 0:05 ` [PATCH 26/28] libfc: introduce LLD event callback Robert Love
2011-01-29 0:05 ` [PATCH 27/28] fcoe: use dedicated workqueue instead of system_wq Robert Love
2011-01-29 0:05 ` [PATCH 28/28] libfcoe: Move common code from fcoe to libfcoe module Robert Love
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110129000402.1784.43277.stgit@localhost6.localdomain6 \
--to=robert.w.love@intel.com \
--cc=James.Bottomley@suse.de \
--cc=jeykholt@cisco.com \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox