From: Robert Love <robert.w.love@intel.com>
To: linux-scsi@vger.kernel.org
Cc: abjoglek@cisco.com, giridhar.malavali@qlogic.com,
james.smart@emulex.com, bprakash@broadcom.com
Subject: [RFC PATCH 0/8] FC Sysfs and FCoE attributes
Date: Mon, 07 Mar 2011 18:31:43 -0800 [thread overview]
Message-ID: <20110308023143.6205.54720.stgit@localhost6.localdomain6> (raw)
The following series adds a new FC subsystem/sysfs layout
to the kernel. It also adds FCoE attributes to the new devices.
An initial usage by libfc, libfcoe, fcoe and fnic is also in
this series.
This change is quite large and touches a lot of things. My
current TODO list is:
1) target support
2) user space
- libhbalinux: have a start on support, but not complete
- libVirt
3) bnx2fc
4) sysfs usage: not sure I'm doing things correctly
At this point I have working code, but I would appreciate
any review comments as there are a lot of design decisions
to be made.
I apologize for the very large patches. I am not sure how
to break them up better. I have tried a few ways, but the
resultant patches tend to be more complicated than when
they are merged. Any suggestions on how to make these
patches smaller or more easily reviewable would be appreciated
as well.
---
Robert Love (8):
fc: Create FC sybsystem
scsi_transport_fcp: Create FC/SCSI interaction layer
libfc, libfcoe, fcoe: Make use of FC subsystem
fc: Add FCoE attributes to FC sysfs
libfcoe, fcoe: Use FCoE attributes
fnic: Convert to new FC Sysfs infrastructure
fc: Add a hbaapi_lib attribute to the fcport structure
Documentation: Add fc_sysfs document
Documentation/fc/fc_sysfs.txt | 192 ++++
Documentation/fc/libfc_libfcoe_fcoe.txt | 17
drivers/Kconfig | 2
drivers/Makefile | 1
drivers/fc/Kconfig | 8
drivers/fc/Makefile | 10
drivers/fc/fcfabric.c | 547 +++++++++++
drivers/fc/fcfabric_fcoe.c | 123 ++
drivers/fc/fcport.c | 453 +++++++++
drivers/fc/fcport_fcoe.c | 134 +++
drivers/fc/fcrport.c | 1012 ++++++++++++++++++++
drivers/fc/fcsysfs.c | 176 +++
drivers/fc/fcsysfs.h | 102 ++
drivers/fc/fcvport.c | 695 ++++++++++++++
drivers/fc/fcvport_fcoe.c | 118 ++
drivers/scsi/Kconfig | 12
drivers/scsi/Makefile | 1
drivers/scsi/fcoe/fcoe.c | 746 ++++++++-------
drivers/scsi/fcoe/fcoe.h | 6
drivers/scsi/fcoe/fcoe_ctlr.c | 310 ++++--
drivers/scsi/fcoe/libfcoe.h | 4
drivers/scsi/fnic/fnic.h | 33 -
drivers/scsi/fnic/fnic_fcs.c | 32 -
drivers/scsi/fnic/fnic_isr.c | 13
drivers/scsi/fnic/fnic_main.c | 412 ++++----
drivers/scsi/fnic/fnic_res.c | 47 -
drivers/scsi/fnic/fnic_scsi.c | 193 ++--
drivers/scsi/libfc/fc_disc.c | 4
drivers/scsi/libfc/fc_exch.c | 11
drivers/scsi/libfc/fc_fcp.c | 120 +-
drivers/scsi/libfc/fc_libfc.h | 40 -
drivers/scsi/libfc/fc_lport.c | 208 ++--
drivers/scsi/libfc/fc_npiv.c | 87 +-
drivers/scsi/libfc/fc_rport.c | 19
drivers/scsi/scsi_transport_fcp.c | 1571 +++++++++++++++++++++++++++++++
include/fc/fc.h | 1055 +++++++++++++++++++++
include/scsi/fc_encode.h | 40 -
include/scsi/libfc.h | 96 +-
include/scsi/libfcoe.h | 18
include/scsi/scsi_transport_fcp.h | 307 ++++++
40 files changed, 7911 insertions(+), 1064 deletions(-)
create mode 100644 Documentation/fc/fc_sysfs.txt
create mode 100644 Documentation/fc/libfc_libfcoe_fcoe.txt
create mode 100644 drivers/fc/Kconfig
create mode 100644 drivers/fc/Makefile
create mode 100644 drivers/fc/fcfabric.c
create mode 100644 drivers/fc/fcfabric_fcoe.c
create mode 100644 drivers/fc/fcport.c
create mode 100644 drivers/fc/fcport_fcoe.c
create mode 100644 drivers/fc/fcrport.c
create mode 100644 drivers/fc/fcsysfs.c
create mode 100644 drivers/fc/fcsysfs.h
create mode 100644 drivers/fc/fcvport.c
create mode 100644 drivers/fc/fcvport_fcoe.c
create mode 100644 drivers/scsi/scsi_transport_fcp.c
create mode 100644 include/fc/fc.h
create mode 100644 include/scsi/scsi_transport_fcp.h
--
Thanks, //Rob
next reply other threads:[~2011-03-08 2:35 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-03-08 2:31 Robert Love [this message]
2011-03-08 2:31 ` [RFC PATCH 1/8] fc: Create FC sybsystem Robert Love
2011-03-08 2:31 ` [RFC PATCH 2/8] scsi_transport_fcp: Create FC/SCSI interaction layer Robert Love
2011-03-08 2:31 ` [RFC PATCH 3/8] libfc, libfcoe, fcoe: Make use of FC subsystem Robert Love
2011-03-08 2:32 ` [RFC PATCH 4/8] fc: Add FCoE attributes to FC sysfs Robert Love
2011-03-08 2:32 ` [RFC PATCH 5/8] libfcoe, fcoe: Use FCoE attributes Robert Love
2011-03-08 2:32 ` [RFC PATCH 6/8] fnic: Convert to new FC Sysfs infrastructure Robert Love
2011-03-08 2:32 ` [RFC PATCH 7/8] fc: Add a hbaapi_lib attribute to the fcport structure Robert Love
2011-03-08 2:32 ` [RFC PATCH 8/8] Documentation: Add fc_sysfs document Robert Love
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110308023143.6205.54720.stgit@localhost6.localdomain6 \
--to=robert.w.love@intel.com \
--cc=abjoglek@cisco.com \
--cc=bprakash@broadcom.com \
--cc=giridhar.malavali@qlogic.com \
--cc=james.smart@emulex.com \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox