public inbox for linux-scsi@vger.kernel.org
 help / color / mirror / Atom feed
From: Dan Williams <dan.j.williams@intel.com>
To: james.bottomley@suse.de
Cc: linux-ide@vger.kernel.org, linux-scsi@vger.kernel.org,
	Jack Wang <jack_wang@usish.com>
Subject: [PATCH 3/3] libsas: check dev->gone before submitting sata i/o
Date: Tue, 03 May 2011 11:36:32 -0700	[thread overview]
Message-ID: <20110503183632.21471.63803.stgit@localhost6.localdomain6> (raw)
In-Reply-To: <20110503183526.21471.84735.stgit@localhost6.localdomain6>

Head off doomed-to-fail i/o in sas_queuecommand before sending it down
the ata path.

Before:
sd 7:0:0:0: [sdd] Synchronizing SCSI cache
ata8: no sense translation for status: 0x00
ata8: translated ATA stat/err 0x00/00 to SCSI SK/ASC/ASCQ 0xb/00/00
ata8.00: device reported invalid CHS sector 0
ata8: status=0x00 { }
ata8: no sense translation for status: 0x00
ata8: translated ATA stat/err 0x00/00 to SCSI SK/ASC/ASCQ 0xb/00/00
ata8.00: device reported invalid CHS sector 0
ata8: status=0x00 { }
ata8: no sense translation for status: 0x00
ata8: translated ATA stat/err 0x00/00 to SCSI SK/ASC/ASCQ 0xb/00/00
ata8.00: device reported invalid CHS sector 0
ata8: status=0x00 { }
sd 7:0:0:0: [sdd]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 7:0:0:0: [sdd]  Sense Key : Aborted Command [current] [descriptor]
sd 7:0:0:0: [sdd]  Add. Sense: No additional sense information
sd 7:0:0:0: [sdd] Stopping disk

After:
sd 9:0:0:0: [sdd] Synchronizing SCSI cache
sd 9:0:0:0: [sdd]  Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
sd 9:0:0:0: [sdd] Stopping disk
sd 9:0:0:0: [sdd] START_STOP FAILED
sd 9:0:0:0: [sdd]  Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK

This is a cosmetic change as sata i/o can still leak to a gone device,
but this addresses the nominal hotplug case when releasing the target.

Acked-by: Jack Wang <jack_wang@usish.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
---
 drivers/scsi/libsas/sas_scsi_host.c |   14 +++++++-------
 1 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/scsi/libsas/sas_scsi_host.c b/drivers/scsi/libsas/sas_scsi_host.c
index 1787bd2..ce3efff 100644
--- a/drivers/scsi/libsas/sas_scsi_host.c
+++ b/drivers/scsi/libsas/sas_scsi_host.c
@@ -218,6 +218,13 @@ int sas_queuecommand(struct scsi_cmnd *cmd,
 		struct sas_ha_struct *sas_ha = dev->port->ha;
 		struct sas_task *task;
 
+		/* If the device fell off, no sense in issuing commands */
+		if (dev->gone) {
+			cmd->result = DID_BAD_TARGET << 16;
+			scsi_done(cmd);
+			goto out;
+		}
+
 		if (dev_is_sata(dev)) {
 			unsigned long flags;
 
@@ -228,13 +235,6 @@ int sas_queuecommand(struct scsi_cmnd *cmd,
 			goto out;
 		}
 
-		/* If the device fell off, no sense in issuing commands */
-		if (dev->gone) {
-			cmd->result = DID_BAD_TARGET << 16;
-			scsi_done(cmd);
-			goto out;
-		}
-
 		res = -ENOMEM;
 		task = sas_create_task(cmd, dev, GFP_ATOMIC);
 		if (!task)


      parent reply	other threads:[~2011-05-03 18:36 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-05-03 18:36 [PATCH 0/3] libsas fixlets for 2.6.40 Dan Williams
2011-05-03 18:36 ` [PATCH 1/3] libsas: flush initial device discovery before completing ->scan_finished() Dan Williams
2011-05-04  1:14   ` [PATCH 1/3] libsas: flush initial device discovery before completing->scan_finished() Jack Wang
2011-05-03 18:36 ` [PATCH 2/3] libsas: fix/amend device gone notification in sas_deform_port() Dan Williams
2011-05-06  0:13   ` Dan Williams
2011-05-06 23:43   ` Dan Williams
2011-05-03 18:36 ` Dan Williams [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20110503183632.21471.63803.stgit@localhost6.localdomain6 \
    --to=dan.j.williams@intel.com \
    --cc=jack_wang@usish.com \
    --cc=james.bottomley@suse.de \
    --cc=linux-ide@vger.kernel.org \
    --cc=linux-scsi@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox