public inbox for linux-scsi@vger.kernel.org
 help / color / mirror / Atom feed
From: Sergei Shtylyov <sshtylyov@ru.mvista.com>
To: Eric.Moore@lsi.com, DL-MPTFusionLinux@lsi.com
Cc: linux-scsi@vger.kernel.org, support@lsi.com
Subject: [PATCH] fusion: use pci_dev->revision
Date: Fri, 17 Jun 2011 21:40:28 +0400	[thread overview]
Message-ID: <201106172140.28753.sshtylyov@ru.mvista.com> (raw)

This driver uses PCI_CLASS_REVISION instead of PCI_REVISION_ID, so it wasn't
converted by commit 44c10138fd4bbc4b6d6bff0873c24902f2a9da65 (PCI: Change all
drivers to use pci_device->revision).

In one case, it even reads PCI revision ID without using it -- that code is now
removed...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>

---
The patch is against the recent Linus' tree.

 drivers/message/fusion/mptbase.c |   12 ++++--------
 drivers/message/fusion/mptctl.c  |    4 +---
 2 files changed, 5 insertions(+), 11 deletions(-)

Index: linux-2.6/drivers/message/fusion/mptbase.c
===================================================================
--- linux-2.6.orig/drivers/message/fusion/mptbase.c
+++ linux-2.6/drivers/message/fusion/mptbase.c
@@ -1591,7 +1591,6 @@ mpt_mapresources(MPT_ADAPTER *ioc)
 	unsigned long	 port;
 	u32		 msize;
 	u32		 psize;
-	u8		 revision;
 	int		 r = -ENODEV;
 	struct pci_dev *pdev;
 
@@ -1608,8 +1607,6 @@ mpt_mapresources(MPT_ADAPTER *ioc)
 		return r;
 	}
 
-	pci_read_config_byte(pdev, PCI_CLASS_REVISION, &revision);
-
 	if (sizeof(dma_addr_t) > 4) {
 		const uint64_t required_mask = dma_get_required_mask
 		    (&pdev->dev);
@@ -1717,7 +1714,6 @@ mpt_attach(struct pci_dev *pdev, const s
 	MPT_ADAPTER	*ioc;
 	u8		 cb_idx;
 	int		 r = -ENODEV;
-	u8		 revision;
 	u8		 pcixcmd;
 	static int	 mpt_ids = 0;
 #ifdef CONFIG_PROC_FS
@@ -1825,8 +1821,8 @@ mpt_attach(struct pci_dev *pdev, const s
 	dinitprintk(ioc, printk(MYIOC_s_INFO_FMT "facts @ %p, pfacts[0] @ %p\n",
 	    ioc->name, &ioc->facts, &ioc->pfacts[0]));
 
-	pci_read_config_byte(pdev, PCI_CLASS_REVISION, &revision);
-	mpt_get_product_name(pdev->vendor, pdev->device, revision, ioc->prod_name);
+	mpt_get_product_name(pdev->vendor, pdev->device, pdev->revision,
+			     ioc->prod_name);
 
 	switch (pdev->device)
 	{
@@ -1841,7 +1837,7 @@ mpt_attach(struct pci_dev *pdev, const s
 		break;
 
 	case MPI_MANUFACTPAGE_DEVICEID_FC929X:
-		if (revision < XL_929) {
+		if (pdev->revision < XL_929) {
 			/* 929X Chip Fix. Set Split transactions level
 		 	* for PCIX. Set MOST bits to zero.
 		 	*/
@@ -1872,7 +1868,7 @@ mpt_attach(struct pci_dev *pdev, const s
 		/* 1030 Chip Fix. Disable Split transactions
 		 * for PCIX. Set MOST bits to zero if Rev < C0( = 8).
 		 */
-		if (revision < C0_1030) {
+		if (pdev->revision < C0_1030) {
 			pci_read_config_byte(pdev, 0x6a, &pcixcmd);
 			pcixcmd &= 0x8F;
 			pci_write_config_byte(pdev, 0x6a, pcixcmd);
Index: linux-2.6/drivers/message/fusion/mptctl.c
===================================================================
--- linux-2.6.orig/drivers/message/fusion/mptctl.c
+++ linux-2.6/drivers/message/fusion/mptctl.c
@@ -1250,7 +1250,6 @@ mptctl_getiocinfo (unsigned long arg, un
 	int			iocnum;
 	unsigned int		port;
 	int			cim_rev;
-	u8			revision;
 	struct scsi_device 	*sdev;
 	VirtDevice		*vdevice;
 
@@ -1324,8 +1323,7 @@ mptctl_getiocinfo (unsigned long arg, un
 	pdev = (struct pci_dev *) ioc->pcidev;
 
 	karg->pciId = pdev->device;
-	pci_read_config_byte(pdev, PCI_CLASS_REVISION, &revision);
-	karg->hwRev = revision;
+	karg->hwRev = pdev->revision;
 	karg->subSystemDevice = pdev->subsystem_device;
 	karg->subSystemVendor = pdev->subsystem_vendor;
 

             reply	other threads:[~2011-06-17 17:42 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-06-17 17:40 Sergei Shtylyov [this message]
2011-10-06 19:40 ` [PATCH resend] fusion: use pci_dev->revision Sergei Shtylyov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=201106172140.28753.sshtylyov@ru.mvista.com \
    --to=sshtylyov@ru.mvista.com \
    --cc=DL-MPTFusionLinux@lsi.com \
    --cc=Eric.Moore@lsi.com \
    --cc=linux-scsi@vger.kernel.org \
    --cc=support@lsi.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox