linux-scsi.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Dan Williams <dan.j.williams@intel.com>
To: linux-scsi@vger.kernel.org
Cc: Marcin Tomczak <marcin.tomczak@intel.com>
Subject: [PATCH] isci: enable clock gating
Date: Fri, 27 Jan 2012 11:14:50 -0800	[thread overview]
Message-ID: <20120127191436.27475.19560.stgit@localhost6.localdomain6> (raw)

From: Marcin Tomczak <marcin.tomczak@intel.com>

Enabling clock gating for power savings on entry to controller ready
state. Disable SCU clock gating for power savings on exit from the
controller ready state.

The gating is fully automated by silicon after setting the mode.

Signed-off-by: Marcin Tomczak <marcin.tomczak@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
---

for scsi-misc / 3.4

 drivers/scsi/isci/host.c      |    9 +++++++++
 drivers/scsi/isci/registers.h |   27 +++++++++++++++++++++++++--
 2 files changed, 34 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/isci/host.c b/drivers/scsi/isci/host.c
index e7e5d06..963d7e8 100644
--- a/drivers/scsi/isci/host.c
+++ b/drivers/scsi/isci/host.c
@@ -1488,6 +1488,15 @@ sci_controller_set_interrupt_coalescence(struct isci_host *ihost,
 static void sci_controller_ready_state_enter(struct sci_base_state_machine *sm)
 {
 	struct isci_host *ihost = container_of(sm, typeof(*ihost), sm);
+	u32 val;
+
+	/* enable clock gating for power control of the scu unit */
+	val = readl(&ihost->smu_registers->clock_gating_control);
+	val &= ~(SMU_CGUCR_GEN_BIT(REGCLK_ENABLE) |
+		 SMU_CGUCR_GEN_BIT(TXCLK_ENABLE) |
+		 SMU_CGUCR_GEN_BIT(XCLK_ENABLE));
+	val |= SMU_CGUCR_GEN_BIT(IDLE_ENABLE);
+	writel(val, &ihost->smu_registers->clock_gating_control);
 
 	/* set the default interrupt coalescence number and timeout value. */
 	sci_controller_set_interrupt_coalescence(ihost, 0, 0);
diff --git a/drivers/scsi/isci/registers.h b/drivers/scsi/isci/registers.h
index eaa541a..7eb0ccd 100644
--- a/drivers/scsi/isci/registers.h
+++ b/drivers/scsi/isci/registers.h
@@ -370,6 +370,27 @@ struct scu_iit_entry {
 		>> SMU_DEVICE_CONTEXT_CAPACITY_MAX_RNC_SHIFT \
 	)
 
+/* ***************************************************************************** */
+#define SMU_CLOCK_GATING_CONTROL_IDLE_ENABLE_SHIFT    (0)
+#define SMU_CLOCK_GATING_CONTROL_IDLE_ENABLE_MASK     (0x00000001)
+#define SMU_CLOCK_GATING_CONTROL_XCLK_ENABLE_SHIFT    (1)
+#define SMU_CLOCK_GATING_CONTROL_XCLK_ENABLE_MASK     (0x00000002)
+#define SMU_CLOCK_GATING_CONTROL_TXCLK_ENABLE_SHIFT   (2)
+#define SMU_CLOCK_GATING_CONTROL_TXCLK_ENABLE_MASK    (0x00000004)
+#define SMU_CLOCK_GATING_CONTROL_REGCLK_ENABLE_SHIFT  (3)
+#define SMU_CLOCK_GATING_CONTROL_REGCLK_ENABLE_MASK   (0x00000008)
+#define SMU_CLOCK_GATING_CONTROL_IDLE_TIMEOUT_SHIFT   (16)
+#define SMU_CLOCK_GATING_CONTROL_IDLE_TIMEOUT_MASK    (0x000F0000)
+#define SMU_CLOCK_GATING_CONTROL_FORCE_IDLE_SHIFT     (31)
+#define SMU_CLOCK_GATING_CONTROL_FORCE_IDLE_MASK      (0x80000000)
+#define SMU_CLOCK_GATING_CONTROL_RESERVED_MASK        (0x7FF0FFF0)
+
+#define SMU_CGUCR_GEN_VAL(name, value) \
+	SCU_GEN_VALUE(SMU_CLOCK_GATING_CONTROL_##name, value)
+
+#define SMU_CGUCR_GEN_BIT(name) \
+	SCU_GEN_BIT(SMU_CLOCK_GATING_CONTROL_##name)
+
 /* -------------------------------------------------------------------------- */
 
 #define SMU_CONTROL_STATUS_TASK_CONTEXT_RANGE_ENABLE_SHIFT      (0)
@@ -992,8 +1013,10 @@ struct smu_registers {
 	u32 mmr_address_window;
 /* 0x00A4 SMDW */
 	u32 mmr_data_window;
-	u32 reserved_A8;
-	u32 reserved_AC;
+/* 0x00A8 CGUCR */
+	u32 clock_gating_control;
+/* 0x00AC CGUPC */
+	u32 clock_gating_performance;
 /* A whole bunch of reserved space */
 	u32 reserved_Bx[4];
 	u32 reserved_Cx[4];


                 reply	other threads:[~2012-01-27 19:14 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20120127191436.27475.19560.stgit@localhost6.localdomain6 \
    --to=dan.j.williams@intel.com \
    --cc=linux-scsi@vger.kernel.org \
    --cc=marcin.tomczak@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).