From: Dan Williams <dan.j.williams@intel.com>
To: linux-scsi@vger.kernel.org
Cc: Tom Jackson <thomas.p.jackson@intel.com>, linux-ide@vger.kernel.org
Subject: [libsas PATCH v12 06/11] libsas: unify domain_device sas_rphy lifetimes
Date: Wed, 21 Mar 2012 23:32:24 -0700 [thread overview]
Message-ID: <20120322063224.22036.97391.stgit@dwillia2-linux.jf.intel.com> (raw)
In-Reply-To: <20120322063127.22036.23206.stgit@dwillia2-linux.jf.intel.com>
Since the domain_device can out live the scsi_target we need the rphy to
follow suit otherwise we run into issues like:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000050
IP: [<ffffffffa011561b>] sas_ata_printk+0x43/0x6f [libsas]
PGD 0
Oops: 0000 [#1] SMP
CPU 1
Modules linked in: ses enclosure isci libsas scsi_transport_sas fuse sunrpc cpufreq_ondemand acpi_cpufreq freq_table mperf microcode pcspkr igb joydev iTCO_wdt ioatdma iTCO_vendor_support i2c_i801 i2c_core dca wmi hed ipv6 pata_acpi ata_generic [last unloaded: scsi_wait_scan]
Pid: 129, comm: kworker/u:3 Not tainted 3.3.0-rc5-isci+ #1 Intel Corporation SandyBridge Platform/To be filled by O.E.M.
RIP: 0010:[<ffffffffa011561b>] [<ffffffffa011561b>] sas_ata_printk+0x43/0x6f [libsas]
RSP: 0018:ffff88042232dd70 EFLAGS: 00010282
RAX: 0000000000000000 RBX: ffff8804283165b8 RCX: ffff88042232dda0
RDX: ffff88042232dd78 RSI: ffff8804283165b8 RDI: ffffffffa01188d7
RBP: ffff88042232ddd0 R08: ffff880388454000 R09: ffff8803edfde1f8
R10: ffff8803edfde1f8 R11: ffff8803edfde1f8 R12: ffff880428316750
R13: ffff880388454000 R14: ffff8803f88b31d0 R15: ffff8803f8b21d50
FS: 0000000000000000(0000) GS:ffff88042ee20000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 0000000000000050 CR3: 0000000001a05000 CR4: 00000000000406e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process kworker/u:3 (pid: 129, threadinfo ffff88042232c000, task ffff88042230c920)
Stack:
0000000000000000 ffff880400000018 ffff88042232dde0 ffff88042232dda0
ffffffffa01188c4 ffff88042ee93af0 ffff88042232ddb0 ffffffff8100e047
ffff88042232de10 ffff880420e5a2c8 ffff8803f8b21d50 ffff8803edfde1f8
Call Trace:
[<ffffffff8100e047>] ? load_TLS+0xb/0xf
[<ffffffffa01156ad>] async_sas_ata_eh+0x66/0x95 [libsas]
[<ffffffff810655e1>] async_run_entry_fn+0x9e/0x131
Reported-by: Tom Jackson <thomas.p.jackson@intel.com>
Tested-by: Tom Jackson <thomas.p.jackson@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
---
drivers/scsi/libsas/sas_discover.c | 11 ++++++-----
drivers/scsi/libsas/sas_expander.c | 6 ++++--
2 files changed, 10 insertions(+), 7 deletions(-)
diff --git a/drivers/scsi/libsas/sas_discover.c b/drivers/scsi/libsas/sas_discover.c
index 8ab1de6..57c5100 100644
--- a/drivers/scsi/libsas/sas_discover.c
+++ b/drivers/scsi/libsas/sas_discover.c
@@ -152,6 +152,7 @@ static int sas_get_port_device(struct asd_sas_port *port)
sas_device_set_phy(dev, port->port);
dev->rphy = rphy;
+ get_device(&dev->rphy->dev);
if (dev_is_sata(dev) || dev->dev_type == SAS_END_DEV)
list_add_tail(&dev->disco_list_node, &port->disco_list);
@@ -256,6 +257,9 @@ void sas_free_device(struct kref *kref)
{
struct domain_device *dev = container_of(kref, typeof(*dev), kref);
+ put_device(&dev->rphy->dev);
+ dev->rphy = NULL;
+
if (dev->parent)
sas_put_device(dev->parent);
@@ -314,7 +318,6 @@ static void sas_destruct_devices(struct work_struct *work)
sas_remove_children(&dev->rphy->dev);
sas_rphy_delete(dev->rphy);
- dev->rphy = NULL;
sas_unregister_common_dev(port, dev);
}
}
@@ -326,11 +329,11 @@ void sas_unregister_dev(struct asd_sas_port *port, struct domain_device *dev)
/* this rphy never saw sas_rphy_add */
list_del_init(&dev->disco_list_node);
sas_rphy_free(dev->rphy);
- dev->rphy = NULL;
sas_unregister_common_dev(port, dev);
+ return;
}
- if (dev->rphy && !test_and_set_bit(SAS_DEV_DESTROY, &dev->state)) {
+ if (!test_and_set_bit(SAS_DEV_DESTROY, &dev->state)) {
sas_rphy_unlink(dev->rphy);
list_move_tail(&dev->disco_list_node, &port->destroy_list);
sas_discover_event(dev->port, DISCE_DESTRUCT);
@@ -430,8 +433,6 @@ static void sas_discover_domain(struct work_struct *work)
if (error) {
sas_rphy_free(dev->rphy);
- dev->rphy = NULL;
-
list_del_init(&dev->disco_list_node);
spin_lock_irq(&port->dev_list_lock);
list_del_init(&dev->dev_list_node);
diff --git a/drivers/scsi/libsas/sas_expander.c b/drivers/scsi/libsas/sas_expander.c
index e9423f3..5874c7be 100644
--- a/drivers/scsi/libsas/sas_expander.c
+++ b/drivers/scsi/libsas/sas_expander.c
@@ -783,6 +783,7 @@ static struct domain_device *sas_ex_discover_end_dev(
sas_init_dev(child);
child->rphy = rphy;
+ get_device(&rphy->dev);
list_add_tail(&child->disco_list_node, &parent->port->disco_list);
@@ -806,6 +807,7 @@ static struct domain_device *sas_ex_discover_end_dev(
sas_init_dev(child);
child->rphy = rphy;
+ get_device(&rphy->dev);
sas_fill_in_rphy(child, rphy);
list_add_tail(&child->disco_list_node, &parent->port->disco_list);
@@ -830,8 +832,6 @@ static struct domain_device *sas_ex_discover_end_dev(
out_list_del:
sas_rphy_free(child->rphy);
- child->rphy = NULL;
-
list_del(&child->disco_list_node);
spin_lock_irq(&parent->port->dev_list_lock);
list_del(&child->dev_list_node);
@@ -911,6 +911,7 @@ static struct domain_device *sas_ex_discover_expander(
}
port = parent->port;
child->rphy = rphy;
+ get_device(&rphy->dev);
edev = rphy_to_expander_device(rphy);
child->dev_type = phy->attached_dev_type;
kref_get(&parent->kref);
@@ -934,6 +935,7 @@ static struct domain_device *sas_ex_discover_expander(
res = sas_discover_expander(child);
if (res) {
+ sas_rphy_delete(rphy);
spin_lock_irq(&parent->port->dev_list_lock);
list_del(&child->dev_list_node);
spin_unlock_irq(&parent->port->dev_list_lock);
next prev parent reply other threads:[~2012-03-22 6:32 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-03-22 6:31 [libsas PATCH v12 00/11] libsas eh, discovery, suspend, and fixes Dan Williams
2012-03-22 6:31 ` [libsas PATCH v12 01/11] libsas: cleanup spurious calls to scsi_schedule_eh Dan Williams
2012-03-22 6:32 ` [libsas PATCH v12 02/11] libsas: trim sas_task of slow path infrastructure Dan Williams
2012-03-22 6:32 ` [libsas PATCH v12 03/11] libata: reset once Dan Williams
2012-03-22 6:32 ` [libsas PATCH v12 04/11] sysfs: handle 'parent deleted before child added' Dan Williams
2012-03-22 14:39 ` Greg Kroah-Hartman
2012-03-22 16:27 ` Williams, Dan J
2012-03-22 22:51 ` Stefan Richter
2012-03-22 23:11 ` Williams, Dan J
2012-03-22 23:26 ` Stefan Richter
2012-03-23 18:43 ` Dan Williams
2012-03-23 20:54 ` Greg Kroah-Hartman
2012-03-23 21:15 ` Williams, Dan J
2012-03-22 14:47 ` James Bottomley
2012-03-22 16:34 ` Williams, Dan J
2012-03-22 6:32 ` [libsas PATCH v12 05/11] scsi_transport_sas: fix delete vs scan race Dan Williams
2012-03-22 6:32 ` Dan Williams [this message]
2012-03-22 6:32 ` [libsas PATCH v12 07/11] libsas: fix false positive 'device attached' conditions Dan Williams
2012-03-22 6:32 ` [libsas PATCH v12 08/11] libsas: fix ata_eh clobbering ex_phys via smp_ata_check_ready Dan Williams
2012-03-22 6:32 ` [libsas PATCH v12 09/11] libsas, libata: fix start of life for a sas ata_port Dan Williams
2012-03-22 6:32 ` [libsas PATCH v12 10/11] scsi, sd: limit the scope of the async probe domain Dan Williams
2012-03-22 14:20 ` Alan Stern
2012-03-22 19:09 ` Williams, Dan J
2012-03-22 6:32 ` [libsas PATCH v12 11/11] libsas: suspend / resume support Dan Williams
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20120322063224.22036.97391.stgit@dwillia2-linux.jf.intel.com \
--to=dan.j.williams@intel.com \
--cc=linux-ide@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=thomas.p.jackson@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).