From: Dan Williams <dan.j.williams@intel.com>
To: linux-scsi@vger.kernel.org
Cc: Jeff Skirvin <jeffrey.d.skirvin@intel.com>
Subject: [isci-rnc PATCH v1 21/37] isci: When in the abort path, defeat other resume calls until done.
Date: Thu, 22 Mar 2012 17:29:42 -0700 [thread overview]
Message-ID: <20120323002942.18065.26731.stgit@dwillia2-linux.jf.intel.com> (raw)
In-Reply-To: <20120323002504.18065.45709.stgit@dwillia2-linux.jf.intel.com>
From: Jeff Skirvin <jeffrey.d.skirvin@intel.com>
Completion of I/Os during the one of the abort path interface calls
from libsas can drive remote device state changes and the resumption
of the device RNC. This is a problem when the abort path is
attempting to cleanup outstanding I/O at the same time - the resumption
can prevent the termination from occuring correctly.
Signed-off-by: Jeff Skirvin <jeffrey.d.skirvin@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
---
drivers/scsi/isci/remote_device.c | 2
drivers/scsi/isci/remote_device.h | 1
drivers/scsi/isci/remote_node_context.c | 126 ++++++++++++++++++++-----------
3 files changed, 83 insertions(+), 46 deletions(-)
diff --git a/drivers/scsi/isci/remote_device.c b/drivers/scsi/isci/remote_device.c
index acc94a4..d1c2a22 100644
--- a/drivers/scsi/isci/remote_device.c
+++ b/drivers/scsi/isci/remote_device.c
@@ -1266,6 +1266,7 @@ enum sci_status isci_remote_device_resume_from_abort(
/* Preserve any current resume callbacks, for instance from other
* resumptions.
*/
+ clear_bit(IDEV_ABORT_PATH_ACTIVE, &idev->flags);
status = sci_remote_device_resume(idev, idev->rnc.user_callback,
idev->rnc.user_cookie);
spin_unlock_irqrestore(&ihost->scic_lock, flags);
@@ -1501,6 +1502,7 @@ enum sci_status isci_remote_device_suspend_terminate(
/* Put the device into suspension. */
spin_lock_irqsave(&ihost->scic_lock, flags);
+ set_bit(IDEV_ABORT_PATH_ACTIVE, &idev->flags);
sci_remote_device_suspend(idev, SCI_SW_SUSPEND_LINKHANG_DETECT);
spin_unlock_irqrestore(&ihost->scic_lock, flags);
diff --git a/drivers/scsi/isci/remote_device.h b/drivers/scsi/isci/remote_device.h
index d1d1892..53564c3 100644
--- a/drivers/scsi/isci/remote_device.h
+++ b/drivers/scsi/isci/remote_device.h
@@ -86,6 +86,7 @@ struct isci_remote_device {
#define IDEV_IO_READY 4
#define IDEV_IO_NCQERROR 5
#define IDEV_RNC_LLHANG_ENABLED 6
+ #define IDEV_ABORT_PATH_ACTIVE 7
unsigned long flags;
struct kref kref;
struct isci_port *isci_port;
diff --git a/drivers/scsi/isci/remote_node_context.c b/drivers/scsi/isci/remote_node_context.c
index 77c8b51..faeae95 100644
--- a/drivers/scsi/isci/remote_node_context.c
+++ b/drivers/scsi/isci/remote_node_context.c
@@ -161,6 +161,14 @@ static void sci_remote_node_context_construct_buffer(struct sci_remote_node_cont
rnc->ssp.oaf_more_compatibility_features = 0;
}
+static void sci_remote_node_context_save_cbparams(
+ struct sci_remote_node_context *sci_rnc,
+ scics_sds_remote_node_context_callback callback,
+ void *callback_parameter)
+{
+ sci_rnc->user_callback = callback;
+ sci_rnc->user_cookie = callback_parameter;
+}
/**
*
* @sci_rnc:
@@ -179,10 +187,9 @@ static void sci_remote_node_context_setup_to_resume(
{
if (sci_rnc->destination_state != RNC_DEST_FINAL) {
sci_rnc->destination_state = dest_param;
- if (callback != NULL) {
- sci_rnc->user_callback = callback;
- sci_rnc->user_cookie = callback_parameter;
- }
+ if (callback != NULL)
+ sci_remote_node_context_save_cbparams(
+ sci_rnc, callback, callback_parameter);
}
}
@@ -648,67 +655,94 @@ enum sci_status sci_remote_node_context_resume(struct sci_remote_node_context *s
void *cb_p)
{
enum scis_sds_remote_node_context_states state;
+ struct isci_remote_device *idev = rnc_to_dev(sci_rnc);
state = sci_rnc->sm.current_state_id;
- dev_dbg(scirdev_to_dev(rnc_to_dev(sci_rnc)),
- "%s: state %s, cb_fn = %p, cb_p = %p; dest_state = %d\n",
- __func__, rnc_state_name(state), cb_fn, cb_p,
- sci_rnc->destination_state);
+ dev_dbg(scirdev_to_dev(idev),
+ "%s: state %s, cb_fn = %p, cb_p = %p; dest_state = %d; "
+ "dev resume path %s\n",
+ __func__, rnc_state_name(state), cb_fn, cb_p,
+ sci_rnc->destination_state,
+ test_bit(IDEV_ABORT_PATH_ACTIVE, &idev->flags)
+ ? "<abort active>" : "<normal>");
switch (state) {
case SCI_RNC_INITIAL:
if (sci_rnc->remote_node_index == SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX)
return SCI_FAILURE_INVALID_STATE;
- sci_remote_node_context_setup_to_resume(sci_rnc, cb_fn, cb_p,
- RNC_DEST_READY);
- sci_remote_node_context_construct_buffer(sci_rnc);
- sci_change_state(&sci_rnc->sm, SCI_RNC_POSTING);
+ if (test_bit(IDEV_ABORT_PATH_ACTIVE, &idev->flags))
+ sci_remote_node_context_save_cbparams(sci_rnc, cb_fn,
+ cb_p);
+ else {
+ sci_remote_node_context_setup_to_resume(sci_rnc, cb_fn,
+ cb_p, RNC_DEST_READY);
+ sci_remote_node_context_construct_buffer(sci_rnc);
+ sci_change_state(&sci_rnc->sm, SCI_RNC_POSTING);
+ }
return SCI_SUCCESS;
+
case SCI_RNC_POSTING:
case SCI_RNC_INVALIDATING:
case SCI_RNC_RESUMING:
- /* We are still waiting to post when a resume was requested. */
- switch (sci_rnc->destination_state) {
- case RNC_DEST_SUSPENDED:
- case RNC_DEST_SUSPENDED_RESUME:
- /* Previously waiting to suspend after posting. Now
- * continue onto resumption.
+ if (test_bit(IDEV_ABORT_PATH_ACTIVE, &idev->flags))
+ sci_remote_node_context_save_cbparams(sci_rnc, cb_fn,
+ cb_p);
+ else {
+ /* We are still waiting to post when a resume was
+ * requested.
*/
- sci_remote_node_context_setup_to_resume(
- sci_rnc, cb_fn, cb_p,
- RNC_DEST_SUSPENDED_RESUME);
- break;
- default:
- sci_remote_node_context_setup_to_resume(
- sci_rnc, cb_fn, cb_p,
- RNC_DEST_READY);
- break;
+ switch (sci_rnc->destination_state) {
+ case RNC_DEST_SUSPENDED:
+ case RNC_DEST_SUSPENDED_RESUME:
+ /* Previously waiting to suspend after posting.
+ * Now continue onto resumption.
+ */
+ sci_remote_node_context_setup_to_resume(
+ sci_rnc, cb_fn, cb_p,
+ RNC_DEST_SUSPENDED_RESUME);
+ break;
+ default:
+ sci_remote_node_context_setup_to_resume(
+ sci_rnc, cb_fn, cb_p,
+ RNC_DEST_READY);
+ break;
+ }
}
return SCI_SUCCESS;
+
case SCI_RNC_TX_SUSPENDED:
- case SCI_RNC_TX_RX_SUSPENDED: {
- struct isci_remote_device *idev = rnc_to_dev(sci_rnc);
- struct domain_device *dev = idev->domain_dev;
-
- /* If this is an expander attached SATA device we must
- * invalidate and repost the RNC since this is the only way
- * to clear the TCi to NCQ tag mapping table for the RNi.
- * All other device types we can just resume.
- */
- sci_remote_node_context_setup_to_resume(sci_rnc, cb_fn, cb_p,
- RNC_DEST_READY);
+ case SCI_RNC_TX_RX_SUSPENDED:
+ if (test_bit(IDEV_ABORT_PATH_ACTIVE, &idev->flags))
+ sci_remote_node_context_save_cbparams(sci_rnc, cb_fn,
+ cb_p);
+ else {
+ struct domain_device *dev = idev->domain_dev;
+ /* If this is an expander attached SATA device we must
+ * invalidate and repost the RNC since this is the only
+ * way to clear the TCi to NCQ tag mapping table for
+ * the RNi. All other device types we can just resume.
+ */
+ sci_remote_node_context_setup_to_resume(
+ sci_rnc, cb_fn, cb_p, RNC_DEST_READY);
- if (dev_is_sata(dev) && dev->parent)
- sci_change_state(&sci_rnc->sm, SCI_RNC_INVALIDATING);
- else
- sci_change_state(&sci_rnc->sm, SCI_RNC_RESUMING);
+ if (dev_is_sata(dev) && dev->parent)
+ sci_change_state(&sci_rnc->sm,
+ SCI_RNC_INVALIDATING);
+ else
+ sci_change_state(&sci_rnc->sm,
+ SCI_RNC_RESUMING);
+ }
return SCI_SUCCESS;
- }
+
case SCI_RNC_AWAIT_SUSPENSION:
- sci_remote_node_context_setup_to_resume(
- sci_rnc, cb_fn, cb_p,
- RNC_DEST_SUSPENDED_RESUME);
+ if (test_bit(IDEV_ABORT_PATH_ACTIVE, &idev->flags))
+ sci_remote_node_context_save_cbparams(sci_rnc, cb_fn,
+ cb_p);
+ else
+ sci_remote_node_context_setup_to_resume(
+ sci_rnc, cb_fn, cb_p,
+ RNC_DEST_SUSPENDED_RESUME);
return SCI_SUCCESS;
default:
dev_warn(scirdev_to_dev(rnc_to_dev(sci_rnc)),
next prev parent reply other threads:[~2012-03-23 0:14 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-03-23 0:27 [isci-rnc PATCH v1 00/37] remote node context rework Dan Williams
2012-03-23 0:27 ` [isci-rnc PATCH v1 01/37] isci: Manage the link layer hang detect timer for RNC suspensions Dan Williams
2012-03-23 0:27 ` [isci-rnc PATCH v1 02/37] isci: Fixed bug in resumption from RNC Tx/Rx suspend state Dan Williams
2012-03-23 0:28 ` [isci-rnc PATCH v1 03/37] isci: Handle all suspending TC completions Dan Williams
2012-03-23 0:28 ` [isci-rnc PATCH v1 04/37] isci: Terminate outstanding TCs on TX/RX RNC suspensions Dan Williams
2012-03-23 0:28 ` [isci-rnc PATCH v1 05/37] isci: Manage device suspensions during TC terminations Dan Williams
2012-03-23 0:28 ` [isci-rnc PATCH v1 06/37] isci: Remote device must be suspended for NCQ cleanup Dan Williams
2012-03-23 0:28 ` [isci-rnc PATCH v1 07/37] isci: Remote device stop also suspends the RNC and terminates I/O Dan Williams
2012-03-23 0:28 ` [isci-rnc PATCH v1 08/37] isci: Escalate to I_T_Nexus_Reset when the device is gone Dan Williams
2012-03-23 0:28 ` [isci-rnc PATCH v1 09/37] isci: Redesign device suspension, abort, cleanup Dan Williams
2012-03-23 0:28 ` [isci-rnc PATCH v1 10/37] isci: Add suspension cases for RNC INVALIDATING, POSTING states Dan Williams
2012-03-23 0:28 ` [isci-rnc PATCH v1 11/37] isci: Device access in the error path does not depend on IDEV_GONE Dan Williams
2012-03-23 0:28 ` [isci-rnc PATCH v1 12/37] isci: All pending TCs are terminated when the RNC is invalidated Dan Williams
2012-03-23 0:29 ` [isci-rnc PATCH v1 13/37] isci: Only set IDEV_GONE in the device stop path Dan Williams
2012-03-23 0:29 ` [isci-rnc PATCH v1 14/37] isci: Remove isci_device reqs_in_process and dev_node from isci_device Dan Williams
2012-03-23 0:29 ` [isci-rnc PATCH v1 15/37] isci: Distinguish between remote device suspension cases Dan Williams
2012-03-23 0:29 ` [isci-rnc PATCH v1 16/37] isci: Fix the terminated I/O to not call sas_task_abort() Dan Williams
2012-03-23 0:29 ` [isci-rnc PATCH v1 17/37] isci: Save the suspension hint for upcoming suspensions Dan Williams
2012-03-23 0:29 ` [isci-rnc PATCH v1 18/37] isci: Manage the LLHANG timer enable/disable per-device Dan Williams
2012-03-23 0:29 ` [isci-rnc PATCH v1 19/37] isci: Make sure all TCs are terminated and cleaned in LUN reset Dan Williams
2012-03-23 0:29 ` [isci-rnc PATCH v1 20/37] isci: Implement waiting for suspend in the abort path Dan Williams
2012-03-23 0:29 ` Dan Williams [this message]
2012-03-23 0:29 ` [isci-rnc PATCH v1 22/37] isci: Callbacks to libsas occur under scic_lock and are synchronized Dan Williams
2012-03-23 0:29 ` [isci-rnc PATCH v1 23/37] isci: Manage tag releases differently when aborting tasks Dan Williams
2012-03-23 0:29 ` [isci-rnc PATCH v1 24/37] isci: Fix RNC suspend call for SCI_RESUMING state Dan Williams
2012-03-23 0:30 ` [isci-rnc PATCH v1 25/37] isci: Wait for RNC resumption before leaving the abort path Dan Williams
2012-03-23 0:30 ` [isci-rnc PATCH v1 26/37] isci: Directly control IREQ_ABORT_PATH_ACTIVE when completing TMFs Dan Williams
2012-03-23 0:30 ` [isci-rnc PATCH v1 27/37] isci: Add protocol indicator for TMF requests Dan Williams
2012-03-23 0:30 ` [isci-rnc PATCH v1 28/37] isci: Added timeouts to RNC suspensions in the abort path Dan Williams
2012-03-23 0:30 ` [isci-rnc PATCH v1 29/37] isci: Change the phy control and link reset interface for HW reasons Dan Williams
2012-03-23 0:30 ` [isci-rnc PATCH v1 30/37] isci: Don't wait for an RNC suspend if it's being destroyed Dan Williams
2012-03-23 0:30 ` [isci-rnc PATCH v1 31/37] isci: Restore the ATAPI device RNC management code Dan Williams
2012-03-23 0:30 ` [isci-rnc PATCH v1 32/37] isci: Check IDEV_GONE before performing abort path operations Dan Williams
2012-03-23 0:30 ` [isci-rnc PATCH v1 33/37] isci: Remove obviated host callback list Dan Williams
2012-03-23 0:30 ` [isci-rnc PATCH v1 34/37] isci: Manage the IREQ_NO_AUTO_FREE_TAG under scic_lock Dan Williams
2012-03-23 0:31 ` [isci-rnc PATCH v1 35/37] isci: Fix RNC AWAIT_SUSPENSION->INVALIDATING transition Dan Williams
2012-03-23 0:31 ` [isci-rnc PATCH v1 36/37] isci: Fixed RNC bug that lost the suspension or resumption during destroy Dan Williams
2012-03-23 0:31 ` [isci-rnc PATCH v1 37/37] isci: End the RNC resumption wait when the RNC is destroyed Dan Williams
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20120323002942.18065.26731.stgit@dwillia2-linux.jf.intel.com \
--to=dan.j.williams@intel.com \
--cc=jeffrey.d.skirvin@intel.com \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).