From: Dan Williams <dan.j.williams@intel.com>
To: linux-scsi@vger.kernel.org
Cc: Jeff Skirvin <jeffrey.d.skirvin@intel.com>
Subject: [isci-rnc PATCH v1 31/37] isci: Restore the ATAPI device RNC management code.
Date: Thu, 22 Mar 2012 17:30:44 -0700 [thread overview]
Message-ID: <20120323003044.18065.65223.stgit@dwillia2-linux.jf.intel.com> (raw)
In-Reply-To: <20120323002504.18065.45709.stgit@dwillia2-linux.jf.intel.com>
From: Jeff Skirvin <jeffrey.d.skirvin@intel.com>
The ATAPI specific and STP general RNC suspension code had been
incorrectly removed from the remote device code.
Signed-off-by: Jeff Skirvin <jeffrey.d.skirvin@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
---
drivers/scsi/isci/remote_device.c | 49 ++++++++++++++++++++++---------------
drivers/scsi/isci/remote_device.h | 2 ++
drivers/scsi/isci/request.c | 3 ++
3 files changed, 34 insertions(+), 20 deletions(-)
diff --git a/drivers/scsi/isci/remote_device.c b/drivers/scsi/isci/remote_device.c
index 68ab4fb..48765aa 100644
--- a/drivers/scsi/isci/remote_device.c
+++ b/drivers/scsi/isci/remote_device.c
@@ -72,8 +72,8 @@ const char *dev_state_name(enum sci_remote_device_states state)
}
#undef C
-static enum sci_status sci_remote_device_suspend(struct isci_remote_device *idev,
- enum sci_remote_node_suspension_reasons reason)
+enum sci_status sci_remote_device_suspend(struct isci_remote_device *idev,
+ enum sci_remote_node_suspension_reasons reason)
{
return sci_remote_node_context_suspend(&idev->rnc, reason,
SCI_SOFTWARE_SUSPEND_EXPECTED_EVENT);
@@ -565,6 +565,8 @@ enum sci_status sci_remote_device_event_handler(struct isci_remote_device *idev,
u32 event_code)
{
enum sci_status status;
+ struct sci_base_state_machine *sm = &idev->sm;
+ enum sci_remote_device_states state = sm->current_state_id;
switch (scu_get_event_type(event_code)) {
case SCU_EVENT_TYPE_RNC_OPS_MISC:
@@ -603,6 +605,30 @@ enum sci_status sci_remote_device_event_handler(struct isci_remote_device *idev,
if (status != SCI_SUCCESS)
return status;
+ /* Decode device-specific states that may require an RNC resume during
+ * normal operation. When the abort path is active, these resumes are
+ * managed when the abort path exits.
+ */
+ if (state == SCI_STP_DEV_ATAPI_ERROR) {
+ /* For ATAPI error state resume the RNC right away. */
+ if (scu_get_event_type(event_code) == SCU_EVENT_TYPE_RNC_SUSPEND_TX ||
+ scu_get_event_type(event_code) == SCU_EVENT_TYPE_RNC_SUSPEND_TX_RX) {
+ return sci_remote_node_context_resume(&idev->rnc,
+ atapi_remote_device_resume_done,
+ idev);
+ }
+ }
+
+ if (state == SCI_STP_DEV_IDLE) {
+
+ /* We pick up suspension events to handle specifically to this
+ * state. We resume the RNC right away.
+ */
+ if (scu_get_event_type(event_code) == SCU_EVENT_TYPE_RNC_SUSPEND_TX ||
+ scu_get_event_type(event_code) == SCU_EVENT_TYPE_RNC_SUSPEND_TX_RX)
+ status = sci_remote_node_context_resume(&idev->rnc, NULL, NULL);
+ }
+
return status;
}
@@ -1137,21 +1163,6 @@ static void sci_stp_remote_device_ready_ncq_error_substate_enter(struct sci_base
idev->not_ready_reason);
}
-static void sci_stp_remote_device_atapi_error_substate_enter(
- struct sci_base_state_machine *sm)
-{
- struct isci_remote_device *idev = container_of(sm, typeof(*idev), sm);
-
- /* This state is entered when an I/O is decoded with an error
- * condition. By this point the RNC expected suspension state is set.
- * The error conditions suspend the device, so unsuspend here if
- * possible.
- */
- sci_remote_node_context_resume(&idev->rnc,
- atapi_remote_device_resume_done,
- idev);
-}
-
static void sci_smp_remote_device_ready_idle_substate_enter(struct sci_base_state_machine *sm)
{
struct isci_remote_device *idev = container_of(sm, typeof(*idev), sm);
@@ -1202,9 +1213,7 @@ static const struct sci_base_state sci_remote_device_state_table[] = {
[SCI_STP_DEV_NCQ_ERROR] = {
.enter_state = sci_stp_remote_device_ready_ncq_error_substate_enter,
},
- [SCI_STP_DEV_ATAPI_ERROR] = {
- .enter_state = sci_stp_remote_device_atapi_error_substate_enter,
- },
+ [SCI_STP_DEV_ATAPI_ERROR] = { },
[SCI_STP_DEV_AWAIT_RESET] = { },
[SCI_SMP_DEV_IDLE] = {
.enter_state = sci_smp_remote_device_ready_idle_substate_enter,
diff --git a/drivers/scsi/isci/remote_device.h b/drivers/scsi/isci/remote_device.h
index ff34c4e..7674caa 100644
--- a/drivers/scsi/isci/remote_device.h
+++ b/drivers/scsi/isci/remote_device.h
@@ -382,4 +382,6 @@ enum sci_status isci_remote_device_terminate_requests(
struct isci_host *ihost,
struct isci_remote_device *idev,
struct isci_request *ireq);
+enum sci_status sci_remote_device_suspend(struct isci_remote_device *idev,
+ enum sci_remote_node_suspension_reasons reason);
#endif /* !defined(_ISCI_REMOTE_DEVICE_H_) */
diff --git a/drivers/scsi/isci/request.c b/drivers/scsi/isci/request.c
index 5c97102..6584ef0 100644
--- a/drivers/scsi/isci/request.c
+++ b/drivers/scsi/isci/request.c
@@ -2118,6 +2118,9 @@ static enum sci_status stp_request_udma_await_tc_event(struct isci_request *ireq
* completion.
*/
if (ireq->stp.rsp.fis_type == FIS_REGD2H) {
+ sci_remote_device_suspend(ireq->target_device,
+ SCI_SW_SUSPEND_NORMAL);
+
ireq->scu_status = SCU_TASK_DONE_CHECK_RESPONSE;
ireq->sci_status = SCI_FAILURE_IO_RESPONSE_VALID;
sci_change_state(&ireq->sm, SCI_REQ_COMPLETED);
next prev parent reply other threads:[~2012-03-23 0:15 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-03-23 0:27 [isci-rnc PATCH v1 00/37] remote node context rework Dan Williams
2012-03-23 0:27 ` [isci-rnc PATCH v1 01/37] isci: Manage the link layer hang detect timer for RNC suspensions Dan Williams
2012-03-23 0:27 ` [isci-rnc PATCH v1 02/37] isci: Fixed bug in resumption from RNC Tx/Rx suspend state Dan Williams
2012-03-23 0:28 ` [isci-rnc PATCH v1 03/37] isci: Handle all suspending TC completions Dan Williams
2012-03-23 0:28 ` [isci-rnc PATCH v1 04/37] isci: Terminate outstanding TCs on TX/RX RNC suspensions Dan Williams
2012-03-23 0:28 ` [isci-rnc PATCH v1 05/37] isci: Manage device suspensions during TC terminations Dan Williams
2012-03-23 0:28 ` [isci-rnc PATCH v1 06/37] isci: Remote device must be suspended for NCQ cleanup Dan Williams
2012-03-23 0:28 ` [isci-rnc PATCH v1 07/37] isci: Remote device stop also suspends the RNC and terminates I/O Dan Williams
2012-03-23 0:28 ` [isci-rnc PATCH v1 08/37] isci: Escalate to I_T_Nexus_Reset when the device is gone Dan Williams
2012-03-23 0:28 ` [isci-rnc PATCH v1 09/37] isci: Redesign device suspension, abort, cleanup Dan Williams
2012-03-23 0:28 ` [isci-rnc PATCH v1 10/37] isci: Add suspension cases for RNC INVALIDATING, POSTING states Dan Williams
2012-03-23 0:28 ` [isci-rnc PATCH v1 11/37] isci: Device access in the error path does not depend on IDEV_GONE Dan Williams
2012-03-23 0:28 ` [isci-rnc PATCH v1 12/37] isci: All pending TCs are terminated when the RNC is invalidated Dan Williams
2012-03-23 0:29 ` [isci-rnc PATCH v1 13/37] isci: Only set IDEV_GONE in the device stop path Dan Williams
2012-03-23 0:29 ` [isci-rnc PATCH v1 14/37] isci: Remove isci_device reqs_in_process and dev_node from isci_device Dan Williams
2012-03-23 0:29 ` [isci-rnc PATCH v1 15/37] isci: Distinguish between remote device suspension cases Dan Williams
2012-03-23 0:29 ` [isci-rnc PATCH v1 16/37] isci: Fix the terminated I/O to not call sas_task_abort() Dan Williams
2012-03-23 0:29 ` [isci-rnc PATCH v1 17/37] isci: Save the suspension hint for upcoming suspensions Dan Williams
2012-03-23 0:29 ` [isci-rnc PATCH v1 18/37] isci: Manage the LLHANG timer enable/disable per-device Dan Williams
2012-03-23 0:29 ` [isci-rnc PATCH v1 19/37] isci: Make sure all TCs are terminated and cleaned in LUN reset Dan Williams
2012-03-23 0:29 ` [isci-rnc PATCH v1 20/37] isci: Implement waiting for suspend in the abort path Dan Williams
2012-03-23 0:29 ` [isci-rnc PATCH v1 21/37] isci: When in the abort path, defeat other resume calls until done Dan Williams
2012-03-23 0:29 ` [isci-rnc PATCH v1 22/37] isci: Callbacks to libsas occur under scic_lock and are synchronized Dan Williams
2012-03-23 0:29 ` [isci-rnc PATCH v1 23/37] isci: Manage tag releases differently when aborting tasks Dan Williams
2012-03-23 0:29 ` [isci-rnc PATCH v1 24/37] isci: Fix RNC suspend call for SCI_RESUMING state Dan Williams
2012-03-23 0:30 ` [isci-rnc PATCH v1 25/37] isci: Wait for RNC resumption before leaving the abort path Dan Williams
2012-03-23 0:30 ` [isci-rnc PATCH v1 26/37] isci: Directly control IREQ_ABORT_PATH_ACTIVE when completing TMFs Dan Williams
2012-03-23 0:30 ` [isci-rnc PATCH v1 27/37] isci: Add protocol indicator for TMF requests Dan Williams
2012-03-23 0:30 ` [isci-rnc PATCH v1 28/37] isci: Added timeouts to RNC suspensions in the abort path Dan Williams
2012-03-23 0:30 ` [isci-rnc PATCH v1 29/37] isci: Change the phy control and link reset interface for HW reasons Dan Williams
2012-03-23 0:30 ` [isci-rnc PATCH v1 30/37] isci: Don't wait for an RNC suspend if it's being destroyed Dan Williams
2012-03-23 0:30 ` Dan Williams [this message]
2012-03-23 0:30 ` [isci-rnc PATCH v1 32/37] isci: Check IDEV_GONE before performing abort path operations Dan Williams
2012-03-23 0:30 ` [isci-rnc PATCH v1 33/37] isci: Remove obviated host callback list Dan Williams
2012-03-23 0:30 ` [isci-rnc PATCH v1 34/37] isci: Manage the IREQ_NO_AUTO_FREE_TAG under scic_lock Dan Williams
2012-03-23 0:31 ` [isci-rnc PATCH v1 35/37] isci: Fix RNC AWAIT_SUSPENSION->INVALIDATING transition Dan Williams
2012-03-23 0:31 ` [isci-rnc PATCH v1 36/37] isci: Fixed RNC bug that lost the suspension or resumption during destroy Dan Williams
2012-03-23 0:31 ` [isci-rnc PATCH v1 37/37] isci: End the RNC resumption wait when the RNC is destroyed Dan Williams
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20120323003044.18065.65223.stgit@dwillia2-linux.jf.intel.com \
--to=dan.j.williams@intel.com \
--cc=jeffrey.d.skirvin@intel.com \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).