[PATCH 03/17] hpsa: enable bus master bit after pci_enable_device

["Stephen M. Cameron" <scameron@beardog.cce.hp.com>]

From: Stephen M. Cameron <scameron@beardog.cce.hp.com>

pci_disable_device() disables the bus master bit and pci_enable_device does
not re-enable it.  It needs to be enabled.

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
---
 drivers/scsi/hpsa.c |    6 ++++++
 1 files changed, 6 insertions(+), 0 deletions(-)

diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index 5119ce6..363619d 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -3917,6 +3917,7 @@ static int __devinit hpsa_enter_simple_mode(struct ctlr_info *h)
 static int __devinit hpsa_pci_init(struct ctlr_info *h)
 {
 	int prod_index, err;
+	u16 command_register;
 
 	prod_index = hpsa_lookup_board_id(h->pdev, &h->board_id);
 	if (prod_index < 0)
@@ -3933,6 +3934,11 @@ static int __devinit hpsa_pci_init(struct ctlr_info *h)
 		return err;
 	}
 
+	/* Enable bus mastering (pci_disable_device may disable this) */
+	pci_read_config_word(h->pdev, PCI_COMMAND, &command_register);
+	command_register |= PCI_COMMAND_MASTER;
+	pci_write_config_word(h->pdev, PCI_COMMAND, command_register);
+
 	err = pci_request_regions(h->pdev, HPSA);
 	if (err) {
 		dev_err(&h->pdev->dev,