From mboxrd@z Thu Jan 1 00:00:00 1970 From: Dan Carpenter Subject: [patch] [SCSI] arcmsr: fix misuse of | instead of & Date: Sat, 9 Jun 2012 12:10:19 +0300 Message-ID: <20120609091018.GC877@elgon.mountain> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Content-Disposition: inline Sender: linux-kernel-owner@vger.kernel.org To: "James E.J. Bottomley" Cc: David Howells , Nick Cheng , linux-scsi@vger.kernel.org, linux-kernel@vger.kernel.org, kernel-janitors@vger.kernel.org List-Id: linux-scsi@vger.kernel.org ARCMSR_ARC1880_DiagWrite_ENABLE is 0x00000080 so (x | 0x00000080) is never zero. The intent here was to test that loop until ARCMSR_ARC1880_DiagWrite_ENABLE was turned on, but because the test was wrong, we would do five loops regardless of whether it succeed or not. Also I simplified the condition a little by removing the unused assignement. Signed-off-by: Dan Carpenter --- Static checker stuff. I do not own this hardware. diff --git a/drivers/scsi/arcmsr/arcmsr_hba.c b/drivers/scsi/arcmsr/arcmsr_hba.c index cbde1dc..def24a1 100644 --- a/drivers/scsi/arcmsr/arcmsr_hba.c +++ b/drivers/scsi/arcmsr/arcmsr_hba.c @@ -2821,7 +2821,7 @@ static void arcmsr_hardware_reset(struct AdapterControlBlock *acb) int i, count = 0; struct MessageUnit_A __iomem *pmuA = acb->pmuA; struct MessageUnit_C __iomem *pmuC = acb->pmuC; - u32 temp = 0; + /* backup pci config data */ printk(KERN_NOTICE "arcmsr%d: executing hw bus reset .....\n", acb->host->host_no); for (i = 0; i < 64; i++) { @@ -2839,7 +2839,7 @@ static void arcmsr_hardware_reset(struct AdapterControlBlock *acb) writel(0x2, &pmuC->write_sequence); writel(0x7, &pmuC->write_sequence); writel(0xD, &pmuC->write_sequence); - } while ((((temp = readl(&pmuC->host_diagnostic)) | ARCMSR_ARC1880_DiagWrite_ENABLE) == 0) && (count < 5)); + } while (((readl(&pmuC->host_diagnostic) & ARCMSR_ARC1880_DiagWrite_ENABLE) == 0) && (count < 5)); writel(ARCMSR_ARC1880_RESET_ADAPTER, &pmuC->host_diagnostic); } else { pci_write_config_byte(acb->pdev, 0x84, 0x20);