linux-scsi.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: wenxiong@linux.vnet.ibm.com
To: James.Bottomley@HansenPartnership.com
Cc: linux-scsi@vger.kernel.org, brking@linux.vnet.ibm.com,
	klebers@linux.vnet.ibm.com,
	Wen Xiong <wenxiong@linux.vnet.ibm.com>
Subject: [PATCH 1/1] ipr: Fix oops while resetting an ipr adapter
Date: Wed, 30 Jan 2013 23:45:08 -0600	[thread overview]
Message-ID: <20130131055053.742877117@linux.vnet.ibm.com> (raw)
In-Reply-To: 20130131054507.796972036@linux.vnet.ibm.com

[-- Attachment #1: ipr_bringdown_oops_fix.patch --]
[-- Type: text/plain, Size: 4394 bytes --]

From: Brian King <brking@linux.vnet.ibm.com>

When resetting an ipr adapter, we use scsi_block_requests to
block any new commands from scsi core, and then unblock after
the reset. When hotplug removing an adapter, we shut it down
and go through this same code, but we've seen issues with
scsi_unblock_requests running after the adapter's memory has
been freed. There is really no need to block/unblock when
the adapter is being removed, so this patch skips the
block/unblock and will immediately fail any commands that
happen to make it to queuecommand while the adapter is
being shutdown.

Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Wen Xiong <wenxiong@linux.vnet.ibm.com>
---

 drivers/scsi/ipr.c |   33 +++++++++++++++++++++++----------
 drivers/scsi/ipr.h |    1 +
 2 files changed, 24 insertions(+), 10 deletions(-)

Index: b/drivers/scsi/ipr.c
===================================================================
--- a/drivers/scsi/ipr.c	2013-01-21 13:45:10.000000000 -0600
+++ b/drivers/scsi/ipr.c	2013-01-22 14:21:00.394286989 -0600
@@ -6112,7 +6112,7 @@ static int ipr_queuecommand(struct Scsi_
 	 * We have told the host to stop giving us new requests, but
 	 * ERP ops don't count. FIXME
 	 */
-	if (unlikely(!hrrq->allow_cmds && !hrrq->ioa_is_dead)) {
+	if (unlikely(!hrrq->allow_cmds && !hrrq->ioa_is_dead && !hrrq->removing_ioa)) {
 		spin_unlock_irqrestore(hrrq->lock, hrrq_flags);
 		return SCSI_MLQUEUE_HOST_BUSY;
 	}
@@ -6121,7 +6121,7 @@ static int ipr_queuecommand(struct Scsi_
 	 * FIXME - Create scsi_set_host_offline interface
 	 *  and the ioa_is_dead check can be removed
 	 */
-	if (unlikely(hrrq->ioa_is_dead || !res)) {
+	if (unlikely(hrrq->ioa_is_dead || hrrq->removing_ioa || !res)) {
 		spin_unlock_irqrestore(hrrq->lock, hrrq_flags);
 		goto err_nodev;
 	}
@@ -6741,14 +6741,17 @@ static int ipr_ioa_bringdown_done(struct
 	struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
 
 	ENTER;
+	if (!ioa_cfg->hrrq[IPR_INIT_HRRQ].removing_ioa) {
+		ipr_trace;
+		spin_unlock_irq(ioa_cfg->host->host_lock);
+		scsi_unblock_requests(ioa_cfg->host);
+		spin_lock_irq(ioa_cfg->host->host_lock);
+	}
+
 	ioa_cfg->in_reset_reload = 0;
 	ioa_cfg->reset_retries = 0;
 	list_add_tail(&ipr_cmd->queue, &ipr_cmd->hrrq->hrrq_free_q);
 	wake_up_all(&ioa_cfg->reset_wait_q);
-
-	spin_unlock_irq(ioa_cfg->host->host_lock);
-	scsi_unblock_requests(ioa_cfg->host);
-	spin_lock_irq(ioa_cfg->host->host_lock);
 	LEAVE;
 
 	return IPR_RC_JOB_RETURN;
@@ -8494,7 +8497,8 @@ static void _ipr_initiate_ioa_reset(stru
 		spin_unlock(&ioa_cfg->hrrq[i]._lock);
 	}
 	wmb();
-	scsi_block_requests(ioa_cfg->host);
+	if (!ioa_cfg->hrrq[IPR_INIT_HRRQ].removing_ioa)
+		scsi_block_requests(ioa_cfg->host);
 
 	ipr_cmd = ipr_get_free_ipr_cmnd(ioa_cfg);
 	ioa_cfg->reset_cmd = ipr_cmd;
@@ -8549,9 +8553,11 @@ static void ipr_initiate_ioa_reset(struc
 			ipr_fail_all_ops(ioa_cfg);
 			wake_up_all(&ioa_cfg->reset_wait_q);
 
-			spin_unlock_irq(ioa_cfg->host->host_lock);
-			scsi_unblock_requests(ioa_cfg->host);
-			spin_lock_irq(ioa_cfg->host->host_lock);
+			if (!ioa_cfg->hrrq[IPR_INIT_HRRQ].removing_ioa) {
+				spin_unlock_irq(ioa_cfg->host->host_lock);
+				scsi_unblock_requests(ioa_cfg->host);
+				spin_lock_irq(ioa_cfg->host->host_lock);
+			}
 			return;
 		} else {
 			ioa_cfg->in_ioa_bringdown = 1;
@@ -9695,6 +9701,7 @@ static void __ipr_remove(struct pci_dev 
 {
 	unsigned long host_lock_flags = 0;
 	struct ipr_ioa_cfg *ioa_cfg = pci_get_drvdata(pdev);
+	int i;
 	ENTER;
 
 	spin_lock_irqsave(ioa_cfg->host->host_lock, host_lock_flags);
@@ -9704,6 +9711,12 @@ static void __ipr_remove(struct pci_dev 
 		spin_lock_irqsave(ioa_cfg->host->host_lock, host_lock_flags);
 	}
 
+	for (i = 0; i < ioa_cfg->hrrq_num; i++) {
+		spin_lock(&ioa_cfg->hrrq[i]._lock);
+		ioa_cfg->hrrq[i].removing_ioa = 1;
+		spin_unlock(&ioa_cfg->hrrq[i]._lock);
+	}
+	wmb();
 	ipr_initiate_ioa_bringdown(ioa_cfg, IPR_SHUTDOWN_NORMAL);
 
 	spin_unlock_irqrestore(ioa_cfg->host->host_lock, host_lock_flags);
Index: b/drivers/scsi/ipr.h
===================================================================
--- a/drivers/scsi/ipr.h	2013-01-21 13:45:10.000000000 -0600
+++ b/drivers/scsi/ipr.h	2013-01-22 11:10:23.414280773 -0600
@@ -493,6 +493,7 @@ struct ipr_hrr_queue {
 	u8 allow_interrupts:1;
 	u8 ioa_is_dead:1;
 	u8 allow_cmds:1;
+	u8 removing_ioa:1;
 
 	struct blk_iopoll iopoll;
 };

-- 

  reply	other threads:[~2013-01-31  5:53 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-01-31  5:45 [PATCH 0/1] Fix oops while resetting an ipr adapter wenxiong
2013-01-31  5:45 ` wenxiong [this message]
2013-02-22 20:02   ` [PATCH 1/1] ipr: " wenxiong

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20130131055053.742877117@linux.vnet.ibm.com \
    --to=wenxiong@linux.vnet.ibm.com \
    --cc=James.Bottomley@HansenPartnership.com \
    --cc=brking@linux.vnet.ibm.com \
    --cc=klebers@linux.vnet.ibm.com \
    --cc=linux-scsi@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).