* Re: [PATCH 6/8] [SCSI] mpt2sas : When SCSI command is received with task atrribute not set, set it to SIMPLE
2013-02-01 16:30 [PATCH 6/8] [SCSI] mpt2sas : When SCSI command is received with task atrribute not set, set it to SIMPLE Sreekanth Reddy
@ 2013-02-01 7:31 ` Greg KH
0 siblings, 0 replies; 2+ messages in thread
From: Greg KH @ 2013-02-01 7:31 UTC (permalink / raw)
To: Sreekanth Reddy
Cc: jejb, Nagalakshmi.Nandigama, JBottomley, linux-scsi,
sathya.prakash, stable
On Fri, Feb 01, 2013 at 10:00:26PM +0530, Sreekanth Reddy wrote:
> When SCSI command is received with task attribute not set, set it to SIMPLE.
> Previously it is set to untagged. This causes the firmware to fail the commands.
>
> Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@lsi.com>
> ---
>
<formletter>
This is not the correct way to submit patches for inclusion in the
stable kernel tree. Please read Documentation/stable_kernel_rules.txt
for how to do this properly.
</formletter>
^ permalink raw reply [flat|nested] 2+ messages in thread
* [PATCH 6/8] [SCSI] mpt2sas : When SCSI command is received with task atrribute not set, set it to SIMPLE
@ 2013-02-01 16:30 Sreekanth Reddy
2013-02-01 7:31 ` Greg KH
0 siblings, 1 reply; 2+ messages in thread
From: Sreekanth Reddy @ 2013-02-01 16:30 UTC (permalink / raw)
To: jejb, sreekanth.reddy, Nagalakshmi.Nandigama, JBottomley
Cc: linux-scsi, sathya.prakash, stable
When SCSI command is received with task attribute not set, set it to SIMPLE.
Previously it is set to untagged. This causes the firmware to fail the commands.
Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@lsi.com>
---
diff --git a/drivers/scsi/mpt2sas/mpt2sas_scsih.c b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
index 014caef..3b150b8 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_scsih.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
@@ -3998,11 +3998,7 @@ _scsih_qcmd_lck(struct scsi_cmnd *scmd, void (*done)(struct scsi_cmnd *))
else
mpi_control |= MPI2_SCSIIO_CONTROL_SIMPLEQ;
} else
-/* MPI Revision I (UNIT = 0xA) - removed MPI2_SCSIIO_CONTROL_UNTAGGED */
-/* mpi_control |= MPI2_SCSIIO_CONTROL_UNTAGGED;
- */
- mpi_control |= (0x500);
-
+ mpi_control |= MPI2_SCSIIO_CONTROL_SIMPLEQ;
} else
mpi_control |= MPI2_SCSIIO_CONTROL_SIMPLEQ;
/* Make sure Device is not raid volume.
^ permalink raw reply related [flat|nested] 2+ messages in thread
end of thread, other threads:[~2013-02-01 16:30 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-02-01 16:30 [PATCH 6/8] [SCSI] mpt2sas : When SCSI command is received with task atrribute not set, set it to SIMPLE Sreekanth Reddy
2013-02-01 7:31 ` Greg KH
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox