* WARNING: at drivers/scsi/scsi_lib.c:1196 scsi_setup_fs_cmnd during RAID5 startup.
@ 2013-06-12 19:43 Dave Jones
2013-06-12 20:02 ` Ilia Mirkin
2013-06-12 20:10 ` Dave Jones
0 siblings, 2 replies; 4+ messages in thread
From: Dave Jones @ 2013-06-12 19:43 UTC (permalink / raw)
To: Linux Kernel; +Cc: linux-scsi
3.10 seems to have a problem with dirty RAID5 sets.
I've got a machine that panics on boot during RAID5 activation.
After switching the BUG_ON to a WARN_ON, I was able to get this over serial console..
md/raid:md0: not clean -- starting background reconstruction
md/raid:md0: device sdd1 operational as raid disk 2
md/raid:md0: device sdc1 operational as raid disk 1
md/raid:md0: device sdb1 operational as raid disk 0
md/raid:md0: allocated 3300kB
md/raid:md0: raid level 5 active with 3 out of 3 devices, algorithm 2
md0: detected capacity change from 0 to 499847790592
md: resync of RAID array md0
md: minimum _guaranteed_ speed: 1000 KB/sec/disk.
md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for resync.
md: using 128k window, over a total of 244066304k.
md: resuming resync of md0 from checkpoint.
WARNING: at drivers/scsi/scsi_lib.c:1196 scsi_setup_fs_cmnd+0xa3/0xb0()
Modules linked in: raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx kvm_amd xor kvm snd_hda_codec_realtek raid6_pq snd_hda_intel snd_hda_codec btusb microcode snd_pcm bluetooth edac_core pcspkr serio_raw snd_page_alloc snd_timer snd soundcore rfkill r8169 mii sr_mod cdrom pata_atiixp radeon backlight drm_kms_helper ttm
CPU: 1 PID: 160 Comm: kworker/1:1H Not tainted 3.10.0-rc5+ #2
Hardware name: Gigabyte Technology Co., Ltd. GA-MA78GM-S2H/GA-MA78GM-S2H, BIOS F12a 04/23/2010
Workqueue: kblockd blk_delay_work
ffffffff81a4499d ffff8801225f5bb8 ffffffff816aeb63 ffff8801225f5bf0
ffffffff810432b0 ffff880123039148 ffff8801233e8b00 ffff8801225f5fd8
ffff880123039148 ffff880123071290 ffff8801225f5c00 ffffffff8104339a
Call Trace:
[<ffffffff816aeb63>] dump_stack+0x19/0x1b
[<ffffffff810432b0>] warn_slowpath_common+0x70/0xa0
[<ffffffff8104339a>] warn_slowpath_null+0x1a/0x20
[<ffffffff8145d7f3>] scsi_setup_fs_cmnd+0xa3/0xb0
[<ffffffff8146bb80>] sd_prep_fn+0x330/0xf60
[<ffffffff813059cc>] blk_peek_request+0x13c/0x320
[<ffffffff8145db12>] scsi_request_fn+0x52/0x540
[<ffffffff81301ae9>] ? blk_delay_work+0x19/0x40
[<ffffffff813018f2>] __blk_run_queue+0x32/0x40
[<ffffffff81301af5>] blk_delay_work+0x25/0x40
[<ffffffff810690f1>] process_one_work+0x211/0x6f0
[<ffffffff81069085>] ? process_one_work+0x1a5/0x6f0
[<ffffffff810696ec>] worker_thread+0x11c/0x390
[<ffffffff810695d0>] ? process_one_work+0x6f0/0x6f0
[<ffffffff81071c8d>] kthread+0xed/0x100
[<ffffffff81071ba0>] ? insert_kthread_work+0x80/0x80
[<ffffffff816bee5c>] ret_from_fork+0x7c/0xb0
[<ffffffff81071ba0>] ? insert_kthread_work+0x80/0x80
---[ end trace 22d5bd5ee9fceb9e ]---
3.9 boots fine, and puts it into recovery mode..
$ cat /proc/mdstat
Personalities : [raid6] [raid5] [raid4]
md0 : active raid5 sdd1[2] sdb1[0] sdc1[1]
488132608 blocks super 1.2 level 5, 512k chunk, algorithm 2 [3/3] [UUU]
[>....................] resync = 0.7% (1762712/244066304) finish=73.3min speed=55084K/sec
unused devices: <none>
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: WARNING: at drivers/scsi/scsi_lib.c:1196 scsi_setup_fs_cmnd during RAID5 startup.
2013-06-12 19:43 WARNING: at drivers/scsi/scsi_lib.c:1196 scsi_setup_fs_cmnd during RAID5 startup Dave Jones
@ 2013-06-12 20:02 ` Ilia Mirkin
2013-06-12 20:10 ` Dave Jones
1 sibling, 0 replies; 4+ messages in thread
From: Ilia Mirkin @ 2013-06-12 20:02 UTC (permalink / raw)
To: Dave Jones, Linux Kernel, linux-scsi@vger.kernel.org
On Wed, Jun 12, 2013 at 3:43 PM, Dave Jones <davej@redhat.com> wrote:
> 3.10 seems to have a problem with dirty RAID5 sets.
>
> I've got a machine that panics on boot during RAID5 activation.
> After switching the BUG_ON to a WARN_ON, I was able to get this over serial console..
>
> md/raid:md0: not clean -- starting background reconstruction
> md/raid:md0: device sdd1 operational as raid disk 2
> md/raid:md0: device sdc1 operational as raid disk 1
> md/raid:md0: device sdb1 operational as raid disk 0
> md/raid:md0: allocated 3300kB
> md/raid:md0: raid level 5 active with 3 out of 3 devices, algorithm 2
> md0: detected capacity change from 0 to 499847790592
> md: resync of RAID array md0
> md: minimum _guaranteed_ speed: 1000 KB/sec/disk.
> md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for resync.
> md: using 128k window, over a total of 244066304k.
> md: resuming resync of md0 from checkpoint.
> WARNING: at drivers/scsi/scsi_lib.c:1196 scsi_setup_fs_cmnd+0xa3/0xb0()
> Modules linked in: raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx kvm_amd xor kvm snd_hda_codec_realtek raid6_pq snd_hda_intel snd_hda_codec btusb microcode snd_pcm bluetooth edac_core pcspkr serio_raw snd_page_alloc snd_timer snd soundcore rfkill r8169 mii sr_mod cdrom pata_atiixp radeon backlight drm_kms_helper ttm
> CPU: 1 PID: 160 Comm: kworker/1:1H Not tainted 3.10.0-rc5+ #2
> Hardware name: Gigabyte Technology Co., Ltd. GA-MA78GM-S2H/GA-MA78GM-S2H, BIOS F12a 04/23/2010
> Workqueue: kblockd blk_delay_work
> ffffffff81a4499d ffff8801225f5bb8 ffffffff816aeb63 ffff8801225f5bf0
> ffffffff810432b0 ffff880123039148 ffff8801233e8b00 ffff8801225f5fd8
> ffff880123039148 ffff880123071290 ffff8801225f5c00 ffffffff8104339a
> Call Trace:
> [<ffffffff816aeb63>] dump_stack+0x19/0x1b
> [<ffffffff810432b0>] warn_slowpath_common+0x70/0xa0
> [<ffffffff8104339a>] warn_slowpath_null+0x1a/0x20
> [<ffffffff8145d7f3>] scsi_setup_fs_cmnd+0xa3/0xb0
> [<ffffffff8146bb80>] sd_prep_fn+0x330/0xf60
> [<ffffffff813059cc>] blk_peek_request+0x13c/0x320
> [<ffffffff8145db12>] scsi_request_fn+0x52/0x540
> [<ffffffff81301ae9>] ? blk_delay_work+0x19/0x40
> [<ffffffff813018f2>] __blk_run_queue+0x32/0x40
> [<ffffffff81301af5>] blk_delay_work+0x25/0x40
> [<ffffffff810690f1>] process_one_work+0x211/0x6f0
> [<ffffffff81069085>] ? process_one_work+0x1a5/0x6f0
> [<ffffffff810696ec>] worker_thread+0x11c/0x390
> [<ffffffff810695d0>] ? process_one_work+0x6f0/0x6f0
> [<ffffffff81071c8d>] kthread+0xed/0x100
> [<ffffffff81071ba0>] ? insert_kthread_work+0x80/0x80
> [<ffffffff816bee5c>] ret_from_fork+0x7c/0xb0
> [<ffffffff81071ba0>] ? insert_kthread_work+0x80/0x80
> ---[ end trace 22d5bd5ee9fceb9e ]---
>
>
> 3.9 boots fine, and puts it into recovery mode..
>
> $ cat /proc/mdstat
> Personalities : [raid6] [raid5] [raid4]
> md0 : active raid5 sdd1[2] sdb1[0] sdc1[1]
> 488132608 blocks super 1.2 level 5, 512k chunk, algorithm 2 [3/3] [UUU]
> [>....................] resync = 0.7% (1762712/244066304) finish=73.3min speed=55084K/sec
>
> unused devices: <none>
>
I had the same problem... I think you're looking for this patch:
https://lkml.org/lkml/2013/5/19/75
-ilia
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: WARNING: at drivers/scsi/scsi_lib.c:1196 scsi_setup_fs_cmnd during RAID5 startup.
2013-06-12 19:43 WARNING: at drivers/scsi/scsi_lib.c:1196 scsi_setup_fs_cmnd during RAID5 startup Dave Jones
2013-06-12 20:02 ` Ilia Mirkin
@ 2013-06-12 20:10 ` Dave Jones
2013-06-12 20:18 ` Jens Axboe
1 sibling, 1 reply; 4+ messages in thread
From: Dave Jones @ 2013-06-12 20:10 UTC (permalink / raw)
To: Linux Kernel, linux-scsi; +Cc: axboe
On Wed, Jun 12, 2013 at 03:43:46PM -0400, Dave Jones wrote:
> 3.10 seems to have a problem with dirty RAID5 sets.
>
> I've got a machine that panics on boot during RAID5 activation.
> After switching the BUG_ON to a WARN_ON, I was able to get this over serial console..
>
> md/raid:md0: not clean -- starting background reconstruction
> md/raid:md0: device sdd1 operational as raid disk 2
> md/raid:md0: device sdc1 operational as raid disk 1
> md/raid:md0: device sdb1 operational as raid disk 0
> md/raid:md0: allocated 3300kB
> md/raid:md0: raid level 5 active with 3 out of 3 devices, algorithm 2
> md0: detected capacity change from 0 to 499847790592
> md: resync of RAID array md0
> md: minimum _guaranteed_ speed: 1000 KB/sec/disk.
> md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for resync.
> md: using 128k window, over a total of 244066304k.
> md: resuming resync of md0 from checkpoint.
> WARNING: at drivers/scsi/scsi_lib.c:1196 scsi_setup_fs_cmnd+0xa3/0xb0()
https://lkml.org/lkml/2013/5/19/75
I think my favorite part of this month old thread is..
"in that case we could have waited for a long time"
Jens?
Dave
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: WARNING: at drivers/scsi/scsi_lib.c:1196 scsi_setup_fs_cmnd during RAID5 startup.
2013-06-12 20:10 ` Dave Jones
@ 2013-06-12 20:18 ` Jens Axboe
0 siblings, 0 replies; 4+ messages in thread
From: Jens Axboe @ 2013-06-12 20:18 UTC (permalink / raw)
To: Dave Jones; +Cc: Linux Kernel, linux-scsi
On Wed, Jun 12 2013, Dave Jones wrote:
> On Wed, Jun 12, 2013 at 03:43:46PM -0400, Dave Jones wrote:
> > 3.10 seems to have a problem with dirty RAID5 sets.
> >
> > I've got a machine that panics on boot during RAID5 activation.
> > After switching the BUG_ON to a WARN_ON, I was able to get this over serial console..
> >
> > md/raid:md0: not clean -- starting background reconstruction
> > md/raid:md0: device sdd1 operational as raid disk 2
> > md/raid:md0: device sdc1 operational as raid disk 1
> > md/raid:md0: device sdb1 operational as raid disk 0
> > md/raid:md0: allocated 3300kB
> > md/raid:md0: raid level 5 active with 3 out of 3 devices, algorithm 2
> > md0: detected capacity change from 0 to 499847790592
> > md: resync of RAID array md0
> > md: minimum _guaranteed_ speed: 1000 KB/sec/disk.
> > md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for resync.
> > md: using 128k window, over a total of 244066304k.
> > md: resuming resync of md0 from checkpoint.
> > WARNING: at drivers/scsi/scsi_lib.c:1196 scsi_setup_fs_cmnd+0xa3/0xb0()
>
> https://lkml.org/lkml/2013/5/19/75
>
> I think my favorite part of this month old thread is..
>
> "in that case we could have waited for a long time"
>
> Jens?
Sorry, travel ended up getting in the way. Will ship it out today.
--
Jens Axboe
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2013-06-12 20:18 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-06-12 19:43 WARNING: at drivers/scsi/scsi_lib.c:1196 scsi_setup_fs_cmnd during RAID5 startup Dave Jones
2013-06-12 20:02 ` Ilia Mirkin
2013-06-12 20:10 ` Dave Jones
2013-06-12 20:18 ` Jens Axboe
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).