From: Robert Love <robert.w.love@intel.com>
To: linux-scsi@vger.kernel.org
Cc: Bart Van Assche <bvanassche@acm.org>,
Neil Horman <nhorman@tuxdriver.com>
Subject: [PATCH 10/16] libfc: Avoid that sending after an abort triggers a kernel warning
Date: Thu, 05 Sep 2013 12:13:11 -0700 [thread overview]
Message-ID: <20130905191311.15235.39902.stgit@fritz> (raw)
In-Reply-To: <20130905191218.15235.85917.stgit@fritz>
From: Bart Van Assche <bvanassche@acm.org>
Calling fc_seq_send() after an ABTS message has been received triggers
a kernel warning (WARN_ON(!(ep->esb_stat & ESB_ST_SEQ_INIT))). Avoid
this by returning -ENXIO to the caller if fc_seq_send() is invoked after
an ABTS message has been received.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Cc: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
---
drivers/scsi/libfc/fc_exch.c | 59 ++++++++++++++++++++++++++----------------
1 file changed, 37 insertions(+), 22 deletions(-)
diff --git a/drivers/scsi/libfc/fc_exch.c b/drivers/scsi/libfc/fc_exch.c
index bc0aba4..2a7fd5a 100644
--- a/drivers/scsi/libfc/fc_exch.c
+++ b/drivers/scsi/libfc/fc_exch.c
@@ -463,15 +463,21 @@ static void fc_exch_delete(struct fc_exch *ep)
}
static int fc_seq_send_locked(struct fc_lport *lport, struct fc_seq *sp,
- struct fc_frame *fp)
+ struct fc_frame *fp)
{
struct fc_exch *ep;
struct fc_frame_header *fh = fc_frame_header_get(fp);
- int error;
+ int error = -ENXIO;
u32 f_ctl;
u8 fh_type = fh->fh_type;
ep = fc_seq_exch(sp);
+
+ if (ep->esb_stat & (ESB_ST_COMPLETE | ESB_ST_ABNORMAL)) {
+ fc_frame_free(fp);
+ goto out;
+ }
+
WARN_ON(!(ep->esb_stat & ESB_ST_SEQ_INIT));
f_ctl = ntoh24(fh->fh_f_ctl);
@@ -514,6 +520,9 @@ out:
* @lport: The local port that the exchange will be sent on
* @sp: The sequence to be sent
* @fp: The frame to be sent on the exchange
+ *
+ * Note: The frame will be freed either by a direct call to fc_frame_free(fp)
+ * or indirectly by calling libfc_function_template.frame_send().
*/
static int fc_seq_send(struct fc_lport *lport, struct fc_seq *sp,
struct fc_frame *fp)
@@ -621,27 +630,31 @@ static int fc_exch_abort_locked(struct fc_exch *ep,
if (!sp)
return -ENOMEM;
- ep->esb_stat |= ESB_ST_SEQ_INIT | ESB_ST_ABNORMAL;
if (timer_msec)
fc_exch_timer_set_locked(ep, timer_msec);
- /*
- * If not logged into the fabric, don't send ABTS but leave
- * sequence active until next timeout.
- */
- if (!ep->sid)
- return 0;
-
- /*
- * Send an abort for the sequence that timed out.
- */
- fp = fc_frame_alloc(ep->lp, 0);
- if (fp) {
- fc_fill_fc_hdr(fp, FC_RCTL_BA_ABTS, ep->did, ep->sid,
- FC_TYPE_BLS, FC_FC_END_SEQ | FC_FC_SEQ_INIT, 0);
- error = fc_seq_send_locked(ep->lp, sp, fp);
- } else
- error = -ENOBUFS;
+ if (ep->sid) {
+ /*
+ * Send an abort for the sequence that timed out.
+ */
+ fp = fc_frame_alloc(ep->lp, 0);
+ if (fp) {
+ ep->esb_stat |= ESB_ST_SEQ_INIT;
+ fc_fill_fc_hdr(fp, FC_RCTL_BA_ABTS, ep->did, ep->sid,
+ FC_TYPE_BLS, FC_FC_END_SEQ |
+ FC_FC_SEQ_INIT, 0);
+ error = fc_seq_send_locked(ep->lp, sp, fp);
+ } else {
+ error = -ENOBUFS;
+ }
+ } else {
+ /*
+ * If not logged into the fabric, don't send ABTS but leave
+ * sequence active until next timeout.
+ */
+ error = 0;
+ }
+ ep->esb_stat |= ESB_ST_ABNORMAL;
return error;
}
@@ -1299,9 +1312,10 @@ static void fc_exch_recv_abts(struct fc_exch *ep, struct fc_frame *rx_fp)
spin_unlock_bh(&ep->ex_lock);
goto reject;
}
- if (!(ep->esb_stat & ESB_ST_REC_QUAL))
+ if (!(ep->esb_stat & ESB_ST_REC_QUAL)) {
+ ep->esb_stat |= ESB_ST_REC_QUAL;
fc_exch_hold(ep); /* hold for REC_QUAL */
- ep->esb_stat |= ESB_ST_ABNORMAL | ESB_ST_REC_QUAL;
+ }
fc_exch_timer_set_locked(ep, ep->r_a_tov);
fp = fc_frame_alloc(ep->lp, sizeof(*ap));
@@ -1322,6 +1336,7 @@ static void fc_exch_recv_abts(struct fc_exch *ep, struct fc_frame *rx_fp)
}
sp = fc_seq_start_next_locked(sp);
fc_seq_send_last(sp, fp, FC_RCTL_BA_ACC, FC_TYPE_BLS);
+ ep->esb_stat |= ESB_ST_ABNORMAL;
spin_unlock_bh(&ep->ex_lock);
fc_frame_free(rx_fp);
return;
next prev parent reply other threads:[~2013-09-05 19:13 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-09-05 19:12 [PATCH 00/16] libfc, libfcoe, fcoe updates for 3.12(+) Robert Love
2013-09-05 19:12 ` [PATCH 01/16] fcoe: ensure that skb placed on the fip_recv_list are unshared Robert Love
2013-09-05 19:12 ` [PATCH 02/16] fcoe: make sure fcoe frames are unshared prior to manipulating them Robert Love
2013-09-05 19:12 ` [PATCH 03/16] fcoe: cleanup return codes from fcoe_rcv Robert Love
2013-09-05 19:12 ` [PATCH 04/16] libfc: Source code comment spelling fixes Robert Love
2013-09-05 19:12 ` [PATCH 05/16] libfc: Debug code fixes Robert Love
2013-09-05 19:12 ` [PATCH 06/16] libfc: Micro-optimize fc_setup_exch_mgr() Robert Love
2013-09-05 19:12 ` [PATCH 07/16] libfc: Clarify fc_exch_find() Robert Love
2013-09-05 19:13 ` [PATCH 08/16] libfc: Fix a race in fc_exch_timer_set_locked() Robert Love
2013-09-05 19:13 ` [PATCH 09/16] libfc: Protect ep->esb_stat changes via ex_lock Robert Love
2013-09-05 19:13 ` Robert Love [this message]
2013-09-05 19:13 ` [PATCH 11/16] libfc: Reduce exchange lock contention in fc_exch_recv_abts() Robert Love
2013-09-05 19:13 ` [PATCH 12/16] libfc: Do not invoke the response handler after fc_exch_done() Robert Love
2013-09-05 19:13 ` [PATCH 13/16] fcp: Do not interpret check condition as underrun Robert Love
2013-09-05 19:13 ` [PATCH 14/16] fcoe: Declare fcoe_ctlr_mode_set() static Robert Love
2013-09-05 19:13 ` [PATCH 15/16] fcoe: Add missing newlines in debug messages Robert Love
2013-09-05 19:13 ` [PATCH 16/16] fcoe: Reduce fcoe_sysfs_fcf_add() stack usage Robert Love
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130905191311.15235.39902.stgit@fritz \
--to=robert.w.love@intel.com \
--cc=bvanassche@acm.org \
--cc=linux-scsi@vger.kernel.org \
--cc=nhorman@tuxdriver.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).