[PATCH 03/10] hpsa: do not discard scsi status on aborted commands

["Stephen M. Cameron" <scameron@beardog.cce.hp.com>]

From: Stephen M. Cameron <scameron@beardog.cce.hp.com>

We inadvertantly discarded the scsi status for aborted commands.
For some commands (e.g. reads from tape drives) these can't be retried,
and if we discarded the scsi status, the scsi mid layer couldn't notice
anything was wrong and the error was not reported.

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Cc: stable@vger.kernel.org
---
 drivers/scsi/hpsa.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index b63af55..3e45090 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -1289,7 +1289,7 @@ static void complete_scsi_command(struct CommandList *cp)
 					"has check condition: aborted command: "
 					"ASC: 0x%x, ASCQ: 0x%x\n",
 					cp, asc, ascq);
-				cmd->result = DID_SOFT_ERROR << 16;
+				cmd->result |= DID_SOFT_ERROR << 16;
 				break;
 			}
 			/* Must be some other type of check condition */