public inbox for linux-scsi@vger.kernel.org
 help / color / mirror / Atom feed
From: "Stephen M. Cameron" <scameron@beardog.cce.hp.com>
To: jbottomley@parallels.com
Cc: stephenmcameron@gmail.com, mikem@beardog.cce.hp.com,
	matthew.gates@hp.com, linux-scsi@vger.kernel.org,
	scott.teel@hp.com
Subject: [PATCH 21/41] hpsa: do ioaccel mode 2 resource allocations
Date: Wed, 15 Jan 2014 16:38:06 -0600	[thread overview]
Message-ID: <20140115223806.5061.5716.stgit@beardog.cce.hp.com> (raw)
In-Reply-To: <20140115223354.5061.50276.stgit@beardog.cce.hp.com>

From: Stephen M. Cameron <scameron@beardog.cce.hp.com>

Signed-off-by: Mike Miller <mikem@beardog.cce.hp.com>
Acked-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
---
 drivers/scsi/hpsa.c |   50 ++++++++++++++++++++++++++++++++++++++++++++++++++
 drivers/scsi/hpsa.h |    3 +++
 2 files changed, 53 insertions(+), 0 deletions(-)

diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index fbf41c7..f0bd511 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -5295,6 +5295,10 @@ static void hpsa_free_cmd_pool(struct ctlr_info *h)
 		pci_free_consistent(h->pdev,
 			    h->nr_cmds * sizeof(struct CommandList),
 			    h->cmd_pool, h->cmd_pool_dhandle);
+	if (h->ioaccel2_cmd_pool)
+		pci_free_consistent(h->pdev,
+			h->nr_cmds * sizeof(*h->ioaccel2_cmd_pool),
+			h->ioaccel2_cmd_pool, h->ioaccel2_cmd_pool_dhandle);
 	if (h->errinfo_pool)
 		pci_free_consistent(h->pdev,
 			    h->nr_cmds * sizeof(struct ErrorInfo),
@@ -5834,6 +5838,7 @@ static void hpsa_remove_one(struct pci_dev *pdev)
 	kfree(h->cmd_pool_bits);
 	kfree(h->blockFetchTable);
 	kfree(h->ioaccel1_blockFetchTable);
+	kfree(h->ioaccel2_blockFetchTable);
 	kfree(h->hba_inquiry_data);
 	pci_disable_device(pdev);
 	pci_release_regions(pdev);
@@ -6053,6 +6058,44 @@ clean_up:
 	return 1;
 }
 
+static int ioaccel2_alloc_cmds_and_bft(struct ctlr_info *h)
+{
+	/* Allocate ioaccel2 mode command blocks and block fetch table */
+
+	h->ioaccel_maxsg =
+		readl(&(h->cfgtable->io_accel_max_embedded_sg_count));
+	if (h->ioaccel_maxsg > IOACCEL2_MAXSGENTRIES)
+		h->ioaccel_maxsg = IOACCEL2_MAXSGENTRIES;
+
+#define IOACCEL2_COMMANDLIST_ALIGNMENT 128
+	BUILD_BUG_ON(sizeof(struct io_accel2_cmd) %
+			IOACCEL2_COMMANDLIST_ALIGNMENT);
+	h->ioaccel2_cmd_pool =
+		pci_alloc_consistent(h->pdev,
+			h->nr_cmds * sizeof(*h->ioaccel2_cmd_pool),
+			&(h->ioaccel2_cmd_pool_dhandle));
+
+	h->ioaccel2_blockFetchTable =
+		kmalloc(((h->ioaccel_maxsg + 1) *
+				sizeof(u32)), GFP_KERNEL);
+
+	if ((h->ioaccel2_cmd_pool == NULL) ||
+		(h->ioaccel2_blockFetchTable == NULL))
+		goto clean_up;
+
+	memset(h->ioaccel2_cmd_pool, 0,
+		h->nr_cmds * sizeof(*h->ioaccel2_cmd_pool));
+	return 0;
+
+clean_up:
+	if (h->ioaccel2_cmd_pool)
+		pci_free_consistent(h->pdev,
+			h->nr_cmds * sizeof(*h->ioaccel2_cmd_pool),
+			h->ioaccel2_cmd_pool, h->ioaccel2_cmd_pool_dhandle);
+	kfree(h->ioaccel2_blockFetchTable);
+	return 1;
+}
+
 static void hpsa_put_ctlr_into_performant_mode(struct ctlr_info *h)
 {
 	u32 trans_support;
@@ -6073,6 +6116,13 @@ static void hpsa_put_ctlr_into_performant_mode(struct ctlr_info *h)
 				CFGTBL_Trans_enable_directed_msix;
 		if (hpsa_alloc_ioaccel_cmd_and_bft(h))
 			goto clean_up;
+	} else {
+		if (trans_support & CFGTBL_Trans_io_accel2) {
+				transMethod |= CFGTBL_Trans_io_accel2 |
+				CFGTBL_Trans_enable_directed_msix;
+		if (ioaccel2_alloc_cmds_and_bft(h))
+			goto clean_up;
+		}
 	}
 
 	/* TODO, check that this next line h->nreply_queues is correct */
diff --git a/drivers/scsi/hpsa.h b/drivers/scsi/hpsa.h
index 74eb22a..2a4a0cb 100644
--- a/drivers/scsi/hpsa.h
+++ b/drivers/scsi/hpsa.h
@@ -105,6 +105,8 @@ struct ctlr_info {
 	dma_addr_t		cmd_pool_dhandle;
 	struct io_accel1_cmd	*ioaccel_cmd_pool;
 	dma_addr_t		ioaccel_cmd_pool_dhandle;
+	struct io_accel2_cmd	*ioaccel2_cmd_pool;
+	dma_addr_t		ioaccel2_cmd_pool_dhandle;
 	struct ErrorInfo 	*errinfo_pool;
 	dma_addr_t		errinfo_pool_dhandle;
 	unsigned long  		*cmd_pool_bits;
@@ -139,6 +141,7 @@ struct ctlr_info {
 	dma_addr_t reply_pool_dhandle;
 	u32 *blockFetchTable;
 	u32 *ioaccel1_blockFetchTable;
+	u32 *ioaccel2_blockFetchTable;
 	unsigned char *hba_inquiry_data;
 	u32 driver_support;
 	u32 fw_support;


  parent reply	other threads:[~2014-01-15 21:38 UTC|newest]

Thread overview: 46+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-01-15 22:36 [PATCH 00/41] hpsa January 2014 driver updates Stephen M. Cameron
2014-01-15 22:36 ` [PATCH 01/41] hpsa: revert bring logical drives online when format completes Stephen M. Cameron
2014-01-15 22:36 ` [PATCH 02/41] hpsa: revert hide logical drives with format in progress from linux Stephen M. Cameron
2014-01-15 22:36 ` [PATCH 03/41] hpsa: use workqueue instead of kernel thread for lockup detection Stephen M. Cameron
2014-01-15 22:36 ` [PATCH 04/41] hpsa: rename scsi prefetch field Stephen M. Cameron
2014-01-15 22:36 ` [PATCH 05/41] hpsa: enable unit attention reporting Stephen M. Cameron
2014-01-15 22:36 ` [PATCH 06/41] hpsa: do not require board "not ready" status after hard reset Stephen M. Cameron
2014-01-15 22:36 ` [PATCH 07/41] hpsa: allow SCSI mid layer to handle unit attention Stephen M. Cameron
2014-01-15 22:36 ` [PATCH 08/41] hpsa: use extended report luns command for HP SSD SmartPath Stephen M. Cameron
2014-01-15 22:37 ` [PATCH 09/41] hpsa: mark last scatter gather element as the last Stephen M. Cameron
2014-01-15 22:37 ` [PATCH 10/41] hpsa: add support for 'fastpath' i/o Stephen M. Cameron
2014-01-15 22:37 ` [PATCH 11/41] hpsa: only allow REQ_TYPE_FS to use fast path Stephen M. Cameron
2014-01-15 22:37 ` [PATCH 12/41] hpsa: fix task management for mode-1 ioaccell path Stephen M. Cameron
2014-01-15 22:37 ` [PATCH 13/41] hpsa: add ioaccell mode 1 RAID offload support Stephen M. Cameron
2014-01-15 22:37 ` [PATCH 14/41] hpsa: update raid offload status on device rescan Stephen M. Cameron
2014-01-15 22:37 ` [PATCH 15/41] hpsa: poll controller to detect device change event Stephen M. Cameron
2014-01-15 22:37 ` [PATCH 16/41] hpsa: do not rescan controllers known to be locked up Stephen M. Cameron
2014-01-15 22:37 ` [PATCH 17/41] hpsa: add hp_ssd_smart_path_enabled sysfs attribute Stephen M. Cameron
2014-01-15 22:37 ` [PATCH 18/41] hpsa: complain if physical or logical aborts are not supported Stephen M. Cameron
2014-01-15 22:37 ` [PATCH 19/41] hpsa: add ioaccel mode 2 structure definitions Stephen M. Cameron
2014-01-15 22:38 ` [PATCH 20/41] hpsa: Acknowledge controller events in ioaccell mode 2 as well as mode 1 Stephen M. Cameron
2014-01-15 22:38 ` Stephen M. Cameron [this message]
2014-01-15 22:38 ` [PATCH 22/41] hpsa: get physical device handles for io accel " Stephen M. Cameron
2014-01-15 22:38 ` [PATCH 23/41] hpsa: initialize controller to perform io accelerator mode 2 Stephen M. Cameron
2014-01-15 22:38 ` [PATCH 24/41] hpsa: get ioaccel mode 2 i/o working Stephen M. Cameron
2014-01-15 22:38 ` [PATCH 25/41] hpsa: teach hpsa_device_reset to do either target or lun reset Stephen M. Cameron
2014-01-16  8:36   ` Hannes Reinecke
2014-01-16 13:33     ` Gates, Matt
2014-01-15 22:38 ` [PATCH 26/41] hpsa: add task management for ioaccel mode 2 Stephen M. Cameron
2014-01-15 22:38 ` [PATCH 27/41] hpsa: make device update copy the raid map also Stephen M. Cameron
2014-01-15 22:38 ` [PATCH 28/41] hpsa: complete the ioaccel raidmap code Stephen M. Cameron
2014-01-15 22:38 ` [PATCH 29/41] hpsa: allow user to disable accelerated i/o path Stephen M. Cameron
2014-01-15 22:38 ` [PATCH 30/41] hpsa: rescan devices on ioaccel2 error Stephen M. Cameron
2014-01-15 22:38 ` [PATCH 31/41] hpsa: allow VPD page zero to be queried Stephen M. Cameron
2014-01-15 22:39 ` [PATCH 32/41] hpsa: do not inquire for unsupported ioaccel status vpd page Stephen M. Cameron
2014-01-15 22:39 ` [PATCH 33/41] hpsa: retry certain ioaccel error cases on the RAID path Stephen M. Cameron
2014-01-15 22:39 ` [PATCH 34/41] hpsa: update source file copyrights Stephen M. Cameron
2014-01-15 22:39 ` [PATCH 35/41] hpsa: add controller base data-at-rest encryption compatibility ioaccel2 Stephen M. Cameron
2014-01-15 22:39 ` [PATCH 36/41] hpsa: when switching out of accel mode await only accel command completions Stephen M. Cameron
2014-01-15 22:39 ` [PATCH 37/41] hpsa: only do device rescan for certain events Stephen M. Cameron
2014-01-15 22:39 ` [PATCH 38/41] hpsa: improve error messages for driver initiated commands Stephen M. Cameron
2014-01-16  8:42   ` Hannes Reinecke
2014-01-16 16:14     ` scameron
2014-01-15 22:39 ` [PATCH 39/41] hpsa add sysfs debug switch for raid map debugging messages Stephen M. Cameron
2014-01-15 22:39 ` [PATCH 40/41] pci: add HP/3PAR vendor id to pci_ids.h Stephen M. Cameron
2014-01-15 22:39 ` [PATCH 41/41] hpsa: Add support for a few HP Storage controllers Stephen M. Cameron

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20140115223806.5061.5716.stgit@beardog.cce.hp.com \
    --to=scameron@beardog.cce.hp.com \
    --cc=jbottomley@parallels.com \
    --cc=linux-scsi@vger.kernel.org \
    --cc=matthew.gates@hp.com \
    --cc=mikem@beardog.cce.hp.com \
    --cc=scott.teel@hp.com \
    --cc=stephenmcameron@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox