public inbox for linux-scsi@vger.kernel.org
 help / color / mirror / Atom feed
From: "Milan Svoboda" <milan.svoboda-aRb0bU7PRFPrBKCeMvbIDA@public.gmane.org>
To: "Sarah Sharp" <sarah.a.sharp-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
Cc: linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	"USB Storage List"
	<usb-storage-ijkIwGHArpdIPJnuZ7Njw4oP9KaGy4wf@public.gmane.org>,
	linux-scsi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: Re: usb disk recognized but fails
Date: Mon, 20 Jan 2014 20:00:23 +0100	[thread overview]
Message-ID: <20140120200023.5F31B6AF@centrum.cz> (raw)
In-Reply-To: <20140120182319.GB5545@xanatos>

Non-working:

3.12.7-2-ARCH #1 SMP PREEMPT Sun Jan 12 13:09:09 CET 2014 x86_64 GNU/Linux

I'm sorry, I don't remember exactly which version worked, I have had the disk connected to TV for
a long time and only recently I wanted to copy some movies on it. I guess it worked something like
6 or 9 months ago.

Milan

______________________________________________________________
> Od: Sarah Sharp <sarah.a.sharp-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
> Komu: Milan Svoboda <milan.svoboda-aRb0bU7PRFPrBKCeMvbIDA@public.gmane.org>
> Datum: 20.01.2014 19:23
> Předmět: Re: usb disk recognized but fails
>
> CC: linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, "USB Storage List" <usb-storage@lists.one-eyed-alien.net>, linux-scsi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
>Cc-ing the USB storage list, in case this device needs some quirk.
>
>On Wed, Jan 15, 2014 at 03:47:39PM +0100, Milan Svoboda wrote:
>> The SATA adapter has a power input, but it is not used, it is connected to the
>> PC with Y-type USB cable.
>> 
>> The disk works with my "smart" TV, it works with Windows on the same machine,
>> it also had worked some time ago with Linux, but now it shows the following:
>
>Do you know which kernel version it worked with?  What version are you
>currently running?  Please run `uname -a`.
>
>> [ 2192.027213] usb 1-3: new high-speed USB device number 5 using xhci_hcd
>> [ 2192.042323] ums-cypress 1-3:1.0: USB Mass Storage device detected
>> [ 2192.042500] scsi9 : usb-storage 1-3:1.0
>> [ 2193.044219] scsi 9:0:0:0: Direct-Access     WDC WD64 00BPVT-00HXZT0        PQ: 0 ANSI: 0
>> [ 2193.045083] sd 9:0:0:0: [sdb] 1250263728 512-byte logical blocks: (640 GB/596 GiB)
>> [ 2193.045240] sd 9:0:0:0: [sdb] Write Protect is off
>> [ 2193.045245] sd 9:0:0:0: [sdb] Mode Sense: 03 00 00 00
>> [ 2193.045384] sd 9:0:0:0: [sdb] No Caching mode page found
>> [ 2193.045388] sd 9:0:0:0: [sdb] Assuming drive cache: write through
>> [ 2193.046259] sd 9:0:0:0: [sdb] No Caching mode page found
>> [ 2193.046264] sd 9:0:0:0: [sdb] Assuming drive cache: write through
>> [ 2193.054389]  sdb: sdb1
>> [ 2193.055092] sd 9:0:0:0: [sdb] No Caching mode page found
>> [ 2193.055095] sd 9:0:0:0: [sdb] Assuming drive cache: write through
>> [ 2193.055098] sd 9:0:0:0: [sdb] Attached SCSI disk
>> [ 2200.821345] usb 1-3: reset high-speed USB device number 5 using xhci_hcd
>> [ 2200.835063] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800bc71e480
>> [ 2200.835068] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800bc71e4c0
>> [ 2267.897715] sd 9:0:0:0: [sdb] Unhandled sense code
>> [ 2267.897719] sd 9:0:0:0: [sdb]  
>> [ 2267.897721] Result: hostbyte=0x07 driverbyte=0x08
>> [ 2267.897722] sd 9:0:0:0: [sdb]  
>> [ 2267.897724] Sense Key : 0x4 [current] 
>> [ 2267.897735] sd 9:0:0:0: [sdb]  
>> [ 2267.897736] ASC=0x0 ASCQ=0x0
>> [ 2267.897738] sd 9:0:0:0: [sdb] CDB: 
>> [ 2267.897740] cdb[0]=0x28: 28 00 4a 85 6e af 00 00 08 00
>> [ 2267.897746] end_request: I/O error, dev sdb, sector 1250258607
>> [ 2267.897750] Buffer I/O error on device sdb1, logical block 625129272
>> [ 2267.897752] Buffer I/O error on device sdb1, logical block 625129273
>> [ 2267.897753] Buffer I/O error on device sdb1, logical block 625129274
>> [ 2267.897754] Buffer I/O error on device sdb1, logical block 625129275
>> [ 2270.884154] usb 1-3: USB disconnect, device number 5
>> 
>> Bus 001 Device 010: ID 14cd:6116 Super Top M6116 SATA Bridge
>> Device Descriptor:
>>   bLength                18
>>   bDescriptorType         1
>>   bcdUSB               2.00
>>   bDeviceClass            0 (Defined at Interface level)
>>   bDeviceSubClass         0 
>>   bDeviceProtocol         0 
>>   bMaxPacketSize0        64
>>   idVendor           0x14cd Super Top
>>   idProduct          0x6116 M6116 SATA Bridge
>>   bcdDevice            1.50
>>   iManufacturer           1 Super Top   
>>   iProduct                3 USB 2.0  SATA BRIDGE   
>>   iSerial                 2 M6116018VE15
>>   bNumConfigurations      1
>>   Configuration Descriptor:
>>     bLength                 9
>>     bDescriptorType         2
>>     wTotalLength           32
>>     bNumInterfaces          1
>>     bConfigurationValue     1
>>     iConfiguration          0 
>>     bmAttributes         0xc0
>>       Self Powered
>>     MaxPower                2mA
>>     Interface Descriptor:
>>       bLength                 9
>>       bDescriptorType         4
>>       bInterfaceNumber        0
>>       bAlternateSetting       0
>>       bNumEndpoints           2
>>       bInterfaceClass         8 Mass Storage
>>       bInterfaceSubClass      6 SCSI
>>       bInterfaceProtocol     80 Bulk-Only
>>       iInterface              0 
>>       Endpoint Descriptor:
>>         bLength                 7
>>         bDescriptorType         5
>>         bEndpointAddress     0x81  EP 1 IN
>>         bmAttributes            2
>>           Transfer Type            Bulk
>>           Synch Type               None
>>           Usage Type               Data
>>         wMaxPacketSize     0x0200  1x 512 bytes
>>         bInterval               0
>>       Endpoint Descriptor:
>>         bLength                 7
>>         bDescriptorType         5
>>         bEndpointAddress     0x02  EP 2 OUT
>>         bmAttributes            2
>>           Transfer Type            Bulk
>>           Synch Type               None
>>           Usage Type               Data
>>         wMaxPacketSize     0x0200  1x 512 bytes
>>         bInterval               0
>> Device Qualifier (for other device speed):
>>   bLength                10
>>   bDescriptorType         6
>>   bcdUSB               2.00
>>   bDeviceClass            0 (Defined at Interface level)
>>   bDeviceSubClass         0 
>>   bDeviceProtocol         0 
>>   bMaxPacketSize0        64
>>   bNumConfigurations      1
>> Device Status:     0x0001
>>   Self Powered
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-usb" in
>> the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
>> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

  reply	other threads:[~2014-01-20 19:00 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <20140115154739.7DC8AFD8@centrum.cz>
2014-01-20 18:23 ` usb disk recognized but fails Sarah Sharp
2014-01-20 19:00   ` Milan Svoboda [this message]
     [not found]     ` <20140120200023.5F31B6AF-aRb0bU7PRFPrBKCeMvbIDA@public.gmane.org>
2014-01-20 19:45       ` Sarah Sharp
2014-01-21 20:56         ` Milan Svoboda
     [not found]           ` <20140121215636.F5422382-aRb0bU7PRFPrBKCeMvbIDA@public.gmane.org>
2014-01-21 22:12             ` [usb-storage] " Alan Stern
2014-01-22 19:19               ` Milan Svoboda
2014-01-22 19:59                 ` Alan Stern
2014-01-22 21:07                   ` Milan Svoboda
     [not found]                     ` <20140122220717.D61BDE5D-aRb0bU7PRFPrBKCeMvbIDA@public.gmane.org>
2014-01-22 21:34                       ` Alan Stern
     [not found]                         ` <Pine.LNX.4.44L0.1401221632200.1310-100000-IYeN2dnnYyZXsRXLowluHWD2FQJk+8+b@public.gmane.org>
2014-01-23 12:08                           ` Milan Svoboda
2014-01-23 16:54                             ` Alan Stern

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20140120200023.5F31B6AF@centrum.cz \
    --to=milan.svoboda-arb0bu7prfprbkcemvbida@public.gmane.org \
    --cc=linux-scsi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=sarah.a.sharp-VuQAYsv1563Yd54FQh9/CA@public.gmane.org \
    --cc=usb-storage-ijkIwGHArpdIPJnuZ7Njw4oP9KaGy4wf@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox