From: "Michael Büsch" <m@bues.ch>
To: Alan Stern <stern@rowland.harvard.edu>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>,
"Bryn M. Reeves" <bmr@redhat.com>,
linux-scsi@vger.kernel.org, linux-usb@vger.kernel.org,
usb-storage@lists.one-eyed-alien.net
Subject: Re: External USB3 disk fails with "Invalid field in cdb"
Date: Fri, 27 Jun 2014 20:51:53 +0200 [thread overview]
Message-ID: <20140627205153.6a8ac916@wiggum> (raw)
In-Reply-To: <Pine.LNX.4.44L0.1406271440130.875-100000@iolanthe.rowland.org>
[-- Attachment #1: Type: text/plain, Size: 5734 bytes --]
On Fri, 27 Jun 2014 14:42:01 -0400 (EDT)
Alan Stern <stern@rowland.harvard.edu> wrote:
> Michael, can you post the "lsusb -v" output for this device? I see it
> is made by JMicron; they are notorious for buggy USB-ATA bridges.
Of course. Here you go:
Bus 004 Device 009: ID 152d:0567 JMicron Technology Corp. / JMicron USA Technology Corp.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 3.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 9
idVendor 0x152d JMicron Technology Corp. / JMicron USA Technology Corp.
idProduct 0x0567
bcdDevice 1.14
iManufacturer 1 JMicron
iProduct 2 USB to ATA/ATAPI Bridge
iSerial 3 xxx
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 121
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 4 USB Mass Storage
bmAttributes 0xc0
Self Powered
MaxPower 2mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 80 Bulk-Only
iInterface 6 MSC Bulk-Only Transport
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 15
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 15
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 1
bNumEndpoints 4
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 98
iInterface 10 MSC USB Attached SCSI
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 0
Command pipe (0x01)
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 0
MaxStreams 16
Status pipe (0x02)
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 15
MaxStreams 16
Data-in pipe (0x03)
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 15
MaxStreams 16
Data-out pipe (0x04)
Binary Object Store Descriptor:
bLength 5
bDescriptorType 15
wTotalLength 22
bNumDeviceCaps 2
USB 2.0 Extension Device Capability:
bLength 7
bDescriptorType 16
bDevCapabilityType 2
bmAttributes 0x00000002
Link Power Management (LPM) Supported
SuperSpeed USB Device Capability:
bLength 10
bDescriptorType 16
bDevCapabilityType 3
bmAttributes 0x00
wSpeedsSupported 0x000e
Device can operate at Full Speed (12Mbps)
Device can operate at High Speed (480Mbps)
Device can operate at SuperSpeed (5Gbps)
bFunctionalitySupport 1
Lowest fully-functional device speed is Full Speed (12Mbps)
bU1DevExitLat 10 micro seconds
bU2DevExitLat 32 micro seconds
Device Status: 0x000d
Self Powered
U1 Enabled
U2 Enabled
MaxPower=2mA is a nice guess for a hard disk. ;)
--
Michael
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 819 bytes --]
next prev parent reply other threads:[~2014-06-27 18:54 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-06-26 18:55 External USB3 disk fails with "Invalid field in cdb" Michael Büsch
2014-06-27 10:15 ` Bryn M. Reeves
2014-06-27 12:22 ` Michael Büsch
2014-06-27 15:34 ` Michael Büsch
2014-06-27 15:48 ` James Bottomley
2014-06-27 17:55 ` Michael Büsch
2014-06-27 18:42 ` Alan Stern
2014-06-27 18:51 ` Michael Büsch [this message]
2014-06-27 19:23 ` [usb-storage] " Alan Stern
2014-06-27 19:52 ` Michael Büsch
2014-06-30 13:55 ` Michael Büsch
2014-06-30 15:04 ` [PATCH] usb-storage/SCSI: Add broken_fua blacklist flag Alan Stern
2014-06-30 15:16 ` Alan Stern
[not found] ` <Pine.LNX.4.44L0.1406301115010.1550-100000-IYeN2dnnYyZXsRXLowluHWD2FQJk+8+b@public.gmane.org>
2014-06-30 16:28 ` Greg KH
2014-06-30 14:12 ` [usb-storage] Re: External USB3 disk fails with "Invalid field in cdb" James Bottomley
[not found] ` <1404137562.2994.0.camel-doHRWNlmrt9+urZeOPWqwQ@public.gmane.org>
2014-06-30 14:27 ` Alan Stern
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140627205153.6a8ac916@wiggum \
--to=m@bues.ch \
--cc=James.Bottomley@HansenPartnership.com \
--cc=bmr@redhat.com \
--cc=linux-scsi@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=stern@rowland.harvard.edu \
--cc=usb-storage@lists.one-eyed-alien.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox