From: Don Brace <don.brace@pmcs.com>
To: scott.teel@pmcs.com, Kevin.Barnett@pmcs.com,
james.bottomley@parallels.com, hch@infradead.org,
Justin.Lindley@pmcs.com, brace@pmcs.com
Cc: linux-scsi@vger.kernel.org
Subject: [PATCH v2 31/48] hpsa: count passthru cmds with atomics, not a spin locked int
Date: Fri, 23 Jan 2015 16:43:46 -0600 [thread overview]
Message-ID: <20150123224346.14919.12152.stgit@brunhilda> (raw)
In-Reply-To: <20150123224020.14919.29458.stgit@brunhilda>
Performance enhancement. Remove spin_locks from the driver.
Reviewed-by: Scott Teel <scott.teel@pmcs.com>
Signed-off-by: Don Brace <don.brace@pmcs.com>
---
drivers/scsi/hpsa.c | 39 +++++----------------------------------
drivers/scsi/hpsa.h | 3 +--
2 files changed, 6 insertions(+), 36 deletions(-)
diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index 72abcf3..bae3759 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -5105,35 +5105,6 @@ static void check_ioctl_unit_attention(struct ctlr_info *h,
(void) check_for_unit_attention(h, c);
}
-static int increment_passthru_count(struct ctlr_info *h)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&h->passthru_count_lock, flags);
- if (h->passthru_count >= HPSA_MAX_CONCURRENT_PASSTHRUS) {
- spin_unlock_irqrestore(&h->passthru_count_lock, flags);
- return -1;
- }
- h->passthru_count++;
- spin_unlock_irqrestore(&h->passthru_count_lock, flags);
- return 0;
-}
-
-static void decrement_passthru_count(struct ctlr_info *h)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&h->passthru_count_lock, flags);
- if (h->passthru_count <= 0) {
- spin_unlock_irqrestore(&h->passthru_count_lock, flags);
- /* not expecting to get here. */
- dev_warn(&h->pdev->dev, "Bug detected, passthru_count seems to be incorrect.\n");
- return;
- }
- h->passthru_count--;
- spin_unlock_irqrestore(&h->passthru_count_lock, flags);
-}
-
/*
* ioctl
*/
@@ -5156,16 +5127,16 @@ static int hpsa_ioctl(struct scsi_device *dev, int cmd, void __user *arg)
case CCISS_GETDRIVVER:
return hpsa_getdrivver_ioctl(h, argp);
case CCISS_PASSTHRU:
- if (increment_passthru_count(h))
+ if (atomic_dec_if_positive(&h->passthru_cmds_avail) < 0)
return -EAGAIN;
rc = hpsa_passthru_ioctl(h, argp);
- decrement_passthru_count(h);
+ atomic_inc(&h->passthru_cmds_avail);
return rc;
case CCISS_BIG_PASSTHRU:
- if (increment_passthru_count(h))
+ if (atomic_dec_if_positive(&h->passthru_cmds_avail) < 0)
return -EAGAIN;
rc = hpsa_big_passthru_ioctl(h, argp);
- decrement_passthru_count(h);
+ atomic_inc(&h->passthru_cmds_avail);
return rc;
default:
return -ENOTTY;
@@ -6852,7 +6823,7 @@ reinit_after_soft_reset:
spin_lock_init(&h->lock);
spin_lock_init(&h->offline_device_lock);
spin_lock_init(&h->scan_lock);
- spin_lock_init(&h->passthru_count_lock);
+ atomic_set(&h->passthru_cmds_avail, HPSA_MAX_CONCURRENT_PASSTHRUS);
h->resubmit_wq = alloc_workqueue("hpsa", WQ_MEM_RECLAIM, 0);
if (!h->resubmit_wq) {
diff --git a/drivers/scsi/hpsa.h b/drivers/scsi/hpsa.h
index 981479a..1856445 100644
--- a/drivers/scsi/hpsa.h
+++ b/drivers/scsi/hpsa.h
@@ -183,8 +183,7 @@ struct ctlr_info {
/* cap concurrent passthrus at some reasonable maximum */
#define HPSA_MAX_CONCURRENT_PASSTHRUS (10)
- spinlock_t passthru_count_lock; /* protects passthru_count */
- int passthru_count;
+ atomic_t passthru_cmds_avail;
/*
* Performant mode completion buffers
next prev parent reply other threads:[~2015-01-23 22:44 UTC|newest]
Thread overview: 51+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-01-23 22:41 [PATCH v2 00/48] hpsa driver updates Don Brace
2015-01-23 22:41 ` [PATCH v2 01/48] hpsa: correct endian sparse warnings Don Brace
2015-01-23 22:41 ` [PATCH v2 02/48] hpsa: fix memory leak in kdump hard reset Don Brace
2015-01-23 22:41 ` [PATCH v2 03/48] hpsa: turn off interrupts when kdump starts Don Brace
2015-01-23 22:41 ` [PATCH v2 04/48] hpsa: change how SA controllers are reset Don Brace
2015-01-23 22:41 ` [PATCH v2 05/48] hpsa: correct change_queue_depth Don Brace
2015-01-23 22:41 ` [PATCH v2 06/48] hpsa: adjust RAID-1, RAID-1ADM, and RAID-6 names Don Brace
2015-01-23 22:41 ` [PATCH v2 07/48] hpsa: rename free_irqs to hpsa_free_irqs Don Brace
2015-01-23 22:41 ` [PATCH v2 08/48] hpsa: Fix -Wunused-but-set-variable warning Don Brace
2015-01-23 22:41 ` [PATCH v2 09/48] hpsa: notice all request_irq errors Don Brace
2015-01-23 22:41 ` [PATCH v2 10/48] hpsa: remove 0x from queue depth print which is in decimal Don Brace
2015-01-23 22:42 ` [PATCH v2 11/48] hpsa: propagate hard_reset failures in reset_devices mode Don Brace
2015-01-23 22:42 ` [PATCH v2 12/48] hpsa: propagate return value from board ID lookup Don Brace
2015-01-23 22:42 ` [PATCH v2 13/48] hpsa: downgrade the Waiting for no-op print to dev_info Don Brace
2015-01-23 22:42 ` [PATCH v2 14/48] hpsa: refactor hpsa_find_board_params() to encapsulate legacy test Don Brace
2015-01-23 22:42 ` [PATCH v2 15/48] hpsa: trivial message and comment clean ups Don Brace
2015-01-23 22:42 ` [PATCH v2 16/48] hpsa: report failure to ioremap config table Don Brace
2015-01-23 22:42 ` [PATCH v2 17/48] hpsa: rename hpsa_request_irq to hpsa_request_irqs Don Brace
2015-01-23 22:42 ` [PATCH v2 18/48] hpsa: pass error from pci_set_consistent_dma_mask from hpsa_message Don Brace
2015-01-23 22:42 ` [PATCH v2 19/48] hpsa: report allocation failures while allocating SG chain blocks Don Brace
2015-01-23 22:42 ` [PATCH v2 20/48] hpsa: fix memory leak in hpsa_alloc_cmd_pool Don Brace
2015-01-23 22:42 ` [PATCH v2 21/48] hpsa: avoid unneccesary calls to resource freeing functions Don Brace
2015-01-23 22:42 ` [PATCH v2 22/48] hpsa: reserve some commands for use by driver Don Brace
2015-01-23 22:43 ` [PATCH v2 23/48] hpsa: get rid of cmd_special_alloc and cmd_special_free Don Brace
2015-01-23 22:43 ` [PATCH v2 24/48] hpsa: do not queue commands internally in driver Don Brace
2015-01-23 22:43 ` [PATCH v2 25/48] hpsa: do not request device rescan on every ioaccel path error Don Brace
2015-01-23 22:43 ` [PATCH v2 26/48] hpsa: factor out hpsa_ciss_submit function Don Brace
2015-01-23 22:43 ` [PATCH v2 27/48] hpsa: use workqueue to resubmit failed ioaccel commands Don Brace
2015-01-23 22:43 ` [PATCH v2 28/48] hpsa: honor queue depth of physical devices Don Brace
2015-01-23 22:43 ` [PATCH v2 29/48] hpsa: fix race between abort handler and main i/o path Don Brace
2015-01-23 22:43 ` [PATCH v2 30/48] hpsa: optimize cmd_alloc function by remembering last allocation Don Brace
2015-01-23 22:43 ` Don Brace [this message]
2015-01-23 22:43 ` [PATCH v2 32/48] hpsa: slightly optimize SA5_performant_completed Don Brace
2015-01-23 22:43 ` [PATCH v2 33/48] hpsa: do not check for msi(x) in interrupt_pending Don Brace
2015-01-23 22:44 ` [PATCH v2 34/48] hpsa: remove incorrect BUG_ONs checking for raid offload enable Don Brace
2015-01-23 22:44 ` [PATCH v2 35/48] hpsa: do not ack controller events on controllers that do not support it Don Brace
2015-01-23 22:44 ` [PATCH v2 36/48] hpsa: guard against overflowing raid map array Don Brace
2015-01-23 22:44 ` [PATCH v2 37/48] hpsa: check for ctlr lockup after command allocation in main io path Don Brace
2015-01-23 22:44 ` [PATCH v2 38/48] hpsa: return failed from device reset/abort handlers Don Brace
2015-01-23 22:44 ` [PATCH v2 39/48] hpsa: do not use a void pointer for scsi_cmd field of struct CommandList Don Brace
2015-01-23 22:44 ` [PATCH v2 40/48] hpsa: print CDBs instead of kernel virtual addresses for uncommon errors Don Brace
2015-01-23 22:44 ` [PATCH v2 41/48] hpsa: do not use function pointers in fast path command submission Don Brace
2015-01-23 22:44 ` [PATCH v2 42/48] hpsa: move SG descriptor set-up out of hpsa_scatter_gather() Don Brace
2015-01-23 22:44 ` [PATCH v2 43/48] hpsa: refactor duplicated scan completion code into a new routine Don Brace
2015-01-23 22:44 ` [PATCH v2 44/48] hpsa: shorten the wait for the CISS doorbell mode change ack Don Brace
2015-01-23 22:45 ` [PATCH v2 45/48] hpsa: detect and report failures changing controller transport modes Don Brace
2015-01-23 22:45 ` [PATCH v2 46/48] hpsa: add in gen9 controller model names Don Brace
2015-01-23 22:45 ` [PATCH v2 47/48] hpsa: add in P840ar controller model name Don Brace
2015-01-23 22:45 ` [PATCH v2 48/48] hpsa: Use local workqueues instead of system workqueues Don Brace
2015-01-27 16:55 ` Tomas Henzl
2015-01-27 17:13 ` Tomas Henzl
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150123224346.14919.12152.stgit@brunhilda \
--to=don.brace@pmcs.com \
--cc=Justin.Lindley@pmcs.com \
--cc=Kevin.Barnett@pmcs.com \
--cc=brace@pmcs.com \
--cc=hch@infradead.org \
--cc=james.bottomley@parallels.com \
--cc=linux-scsi@vger.kernel.org \
--cc=scott.teel@pmcs.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).