From: Don Brace <don.brace@pmcs.com>
To: scott.teel@pmcs.com, Kevin.Barnett@pmcs.com,
james.bottomley@parallels.com, hch@infradead.org,
Justin.Lindley@pmcs.com, brace@pmcs.com
Cc: linux-scsi@vger.kernel.org
Subject: [PATCH 17/43] hpsa: clean up error handling
Date: Sat, 21 Feb 2015 16:19:03 -0600 [thread overview]
Message-ID: <20150221221903.21954.6173.stgit@brunhilda> (raw)
In-Reply-To: <20150221221553.21954.32599.stgit@brunhilda>
From: Robert Elliott <elliott@hp.com>
refactor error cleanup and shutdown
disable interrupts and pci_disable_device on critical failures
add hpsa_free_cfgtables function
Reviewed-by: Scott Teel <scott.teel@pmcs.com>
Reviewed-by: Kevin Barnett <kevin.barnett@pmcs.com>
Signed-off-by: Robert Elliott <elliott@hp.com>
Signed-off-by: Don Brace <don.brace@pmcs.com>
---
drivers/scsi/hpsa.c | 92 ++++++++++++++++++++++++++++++++-------------------
1 file changed, 58 insertions(+), 34 deletions(-)
diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index 94146c6..21e3610 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -6560,6 +6560,17 @@ static int hpsa_find_cfg_addrs(struct pci_dev *pdev, void __iomem *vaddr,
return 0;
}
+static void hpsa_free_cfgtables(struct ctlr_info *h)
+{
+ if (h->transtable)
+ iounmap(h->transtable);
+ if (h->cfgtable)
+ iounmap(h->cfgtable);
+}
+
+/* Find and map CISS config table and transfer table
++ * several items must be unmapped (freed) later
++ * */
static int hpsa_find_cfgtables(struct ctlr_info *h)
{
u64 cfg_offset;
@@ -6586,8 +6597,11 @@ static int hpsa_find_cfgtables(struct ctlr_info *h)
h->transtable = remap_pci_mem(pci_resource_start(h->pdev,
cfg_base_addr_index)+cfg_offset+trans_offset,
sizeof(*h->transtable));
- if (!h->transtable)
+ if (!h->transtable) {
+ dev_err(&h->pdev->dev, "Failed mapping transfer table\n");
+ hpsa_free_cfgtables(h);
return -ENOMEM;
+ }
return 0;
}
@@ -6763,6 +6777,17 @@ error:
return -ENODEV;
}
+/* free items allocated or mapped by hpsa_pci_init */
+static void hpsa_free_pci_init(struct ctlr_info *h)
+{
+ hpsa_free_cfgtables(h); /* pci_init 4 */
+ iounmap(h->vaddr); /* pci_init 3 */
+ hpsa_disable_interrupt_mode(h); /* pci_init 2 */
+ pci_release_regions(h->pdev); /* pci_init 2 */
+ pci_disable_device(h->pdev); /* pci_init 1 */
+}
+
+/* several items must be freed later */
static int hpsa_pci_init(struct ctlr_info *h)
{
int prod_index, err;
@@ -6781,15 +6806,15 @@ static int hpsa_pci_init(struct ctlr_info *h)
err = pci_enable_device(h->pdev);
if (err) {
- dev_warn(&h->pdev->dev, "unable to enable PCI device\n");
+ dev_err(&h->pdev->dev, "failed to enable PCI device\n");
return err;
}
err = pci_request_regions(h->pdev, HPSA);
if (err) {
dev_err(&h->pdev->dev,
- "cannot obtain PCI resources, aborting\n");
- return err;
+ "failed to obtain PCI resources\n");
+ goto clean1; /* pci */
}
pci_set_master(h->pdev);
@@ -6797,40 +6822,41 @@ static int hpsa_pci_init(struct ctlr_info *h)
hpsa_interrupt_mode(h);
err = hpsa_pci_find_memory_BAR(h->pdev, &h->paddr);
if (err)
- goto err_out_free_res;
+ goto clean2; /* intmode+region, pci */
h->vaddr = remap_pci_mem(h->paddr, 0x250);
if (!h->vaddr) {
+ dev_err(&h->pdev->dev, "failed to remap PCI mem\n");
err = -ENOMEM;
- goto err_out_free_res;
+ goto clean2; /* intmode+region, pci */
}
err = hpsa_wait_for_board_state(h->pdev, h->vaddr, BOARD_READY);
if (err)
- goto err_out_free_res;
+ goto clean3; /* vaddr, intmode+region, pci */
err = hpsa_find_cfgtables(h);
if (err)
- goto err_out_free_res;
+ goto clean3; /* vaddr, intmode+region, pci */
hpsa_find_board_params(h);
if (!hpsa_CISS_signature_present(h)) {
err = -ENODEV;
- goto err_out_free_res;
+ goto clean4; /* cfgtables, vaddr, intmode+region, pci */
}
hpsa_set_driver_support_bits(h);
hpsa_p600_dma_prefetch_quirk(h);
err = hpsa_enter_simple_mode(h);
if (err)
- goto err_out_free_res;
+ goto clean4; /* cfgtables, vaddr, intmode+region, pci */
return 0;
-err_out_free_res:
- if (h->transtable)
- iounmap(h->transtable);
- if (h->cfgtable)
- iounmap(h->cfgtable);
- if (h->vaddr)
- iounmap(h->vaddr);
- pci_disable_device(h->pdev);
+clean4: /* cfgtables, vaddr, intmode+region, pci */
+ hpsa_free_cfgtables(h);
+clean3: /* vaddr, intmode+region, pci */
+ iounmap(h->vaddr);
+clean2: /* intmode+region, pci */
+ hpsa_disable_interrupt_mode(h);
pci_release_regions(h->pdev);
+clean1: /* pci */
+ pci_disable_device(h->pdev);
return err;
}
@@ -7039,8 +7065,9 @@ static int hpsa_request_irqs(struct ctlr_info *h,
}
}
if (rc) {
- dev_err(&h->pdev->dev, "unable to get irq %d for %s\n",
+ dev_err(&h->pdev->dev, "failed to get irq %d for %s\n",
h->intr[h->intr_mode], h->devname);
+ hpsa_free_irqs(h);
return -ENODEV;
}
return 0;
@@ -7092,15 +7119,11 @@ static void hpsa_undo_allocations_after_kdump_soft_reset(struct ctlr_info *h)
kfree(h->ioaccel1_blockFetchTable);
kfree(h->blockFetchTable);
hpsa_free_reply_queues(h);
- if (h->vaddr)
- iounmap(h->vaddr);
- if (h->transtable)
- iounmap(h->transtable);
- if (h->cfgtable)
- iounmap(h->cfgtable);
- hpsa_disable_interrupt_mode(h);
+ hpsa_free_cfgtables(h); /* pci_init 4 */
+ iounmap(h->vaddr); /* pci_init 3 */
+ hpsa_disable_interrupt_mode(h); /* pci_init 2 */
pci_disable_device(h->pdev);
- pci_release_regions(h->pdev);
+ pci_release_regions(h->pdev); /* pci_init 2 */
kfree(h);
}
@@ -7418,7 +7441,7 @@ reinit_after_soft_reset:
dac = 0;
} else {
dev_err(&pdev->dev, "no suitable DMA available\n");
- goto clean1;
+ goto clean2;
}
}
@@ -7528,6 +7551,7 @@ clean4:
clean2_and_free_irqs:
hpsa_free_irqs(h);
clean2:
+ hpsa_free_pci_init(h);
clean1:
if (h->resubmit_wq)
destroy_workqueue(h->resubmit_wq);
@@ -7619,12 +7643,10 @@ static void hpsa_remove_one(struct pci_dev *pdev)
destroy_workqueue(h->resubmit_wq);
hpsa_unregister_scsi(h); /* unhook from SCSI subsystem */
- /* includes hpsa_free_irqs and hpsa_disable_interrupt_mode */
+ /* includes hpsa_free_irqs */
+ /* includes hpsa_disable_interrupt_mode - pci_init 2 */
hpsa_shutdown(pdev);
- iounmap(h->vaddr);
- iounmap(h->transtable);
- iounmap(h->cfgtable);
hpsa_free_device_info(h);
hpsa_free_sg_chain_blocks(h);
pci_free_consistent(h->pdev,
@@ -7639,8 +7661,10 @@ static void hpsa_remove_one(struct pci_dev *pdev)
kfree(h->ioaccel1_blockFetchTable);
kfree(h->ioaccel2_blockFetchTable);
kfree(h->hba_inquiry_data);
- pci_disable_device(pdev);
- pci_release_regions(pdev);
+
+ /* includes hpsa_disable_interrupt_mode - pci_init 2 */
+ hpsa_free_pci_init(h);
+
free_percpu(h->lockup_detected);
kfree(h);
}
next prev parent reply other threads:[~2015-02-21 22:20 UTC|newest]
Thread overview: 58+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-02-21 22:17 [PATCH 00/43] hpsa updates Don Brace
2015-02-21 22:17 ` [PATCH 01/43] hpsa: add masked physical devices into h->dev[] array Don Brace
2015-02-23 20:14 ` Christoph Hellwig
2015-02-26 15:17 ` brace
2015-03-05 13:34 ` Christoph Hellwig
2015-02-21 22:17 ` [PATCH 02/43] hpsa: clean up host, channel, target, lun prints Don Brace
2015-02-23 20:16 ` Christoph Hellwig
2015-02-26 14:50 ` brace
2015-02-21 22:17 ` [PATCH 03/43] hpsa: rework controller command submission Don Brace
2015-02-21 22:17 ` [PATCH 04/43] hpsa: clean up aborts Don Brace
2015-02-21 22:17 ` [PATCH 05/43] hpsa: decrement h->commands_outstanding in fail_all_outstanding_cmds Don Brace
2015-02-21 22:18 ` [PATCH 06/43] hpsa: hpsa decode sense data for io and tmf Don Brace
2015-02-23 20:18 ` Christoph Hellwig
2015-02-25 18:06 ` brace
2015-02-21 22:18 ` [PATCH 07/43] hpsa: allow lockup detected to be viewed via sysfs Don Brace
2015-02-21 22:18 ` [PATCH 08/43] hpsa: make function names consistent Don Brace
2015-02-21 22:18 ` [PATCH 09/43] hpsa: factor out hpsa_init_cmd function Don Brace
2015-02-21 22:18 ` [PATCH 10/43] hpsa: do not ignore return value of hpsa_register_scsi Don Brace
2015-02-23 20:18 ` Christoph Hellwig
2015-02-21 22:18 ` [PATCH 11/43] hpsa: try resubmitting down raid path on task set full Don Brace
2015-02-21 22:18 ` [PATCH 12/43] hpsa: factor out hpsa_ioaccel_submit function Don Brace
2015-02-21 22:18 ` [PATCH 13/43] hpsa: print accurate SSD Smart Path Enabled status Don Brace
2015-02-21 22:18 ` [PATCH 14/43] hpsa: use ioaccel2 path to submit IOs to physical drives in HBA mode Don Brace
2015-02-21 22:18 ` [PATCH 15/43] hpsa: Get queue depth from identify physical bmic for physical disks Don Brace
2015-02-21 22:18 ` [PATCH 16/43] hpsa: break hpsa_free_irqs_and_disable_msix into two functions Don Brace
2015-02-21 22:19 ` Don Brace [this message]
2015-02-21 22:19 ` [PATCH 18/43] hpsa: refactor freeing of resources into more logical functions Don Brace
2015-02-21 22:19 ` [PATCH 19/43] hpsa: add ioaccel sg chaining for the ioaccel2 path Don Brace
2015-02-21 22:19 ` [PATCH 20/43] hpsa: add more ioaccel2 error handling, including underrun statuses Don Brace
2015-02-21 22:19 ` [PATCH 21/43] hpsa: do not check cmd_alloc return value - it cannnot return NULL Don Brace
2015-02-21 22:19 ` [PATCH 22/43] hpsa: correct return values from driver functions Don Brace
2015-02-21 22:19 ` [PATCH 23/43] hpsa: clean up driver init Don Brace
2015-02-21 22:19 ` [PATCH 24/43] hpsa: clean up some error reporting output in abort handler Don Brace
2015-02-21 22:19 ` [PATCH 25/43] hpsa: do not print ioaccel2 warning messages about unusual completions Don Brace
2015-02-21 22:19 ` [PATCH 26/43] hpsa: add support sending aborts to physical devices via the ioaccel2 path Don Brace
2015-02-21 22:19 ` [PATCH 27/43] hpsa: use helper routines for finishing commands Don Brace
2015-02-21 22:20 ` [PATCH 28/43] hpsa: don't return abort request until target is complete Don Brace
2015-02-21 22:20 ` [PATCH 29/43] hpsa: refactor and rework support for sending TEST_UNIT_READY Don Brace
2015-02-21 22:20 ` [PATCH 30/43] hpsa: performance tweak for hpsa_scatter_gather() Don Brace
2015-02-21 22:20 ` [PATCH 31/43] hpsa: call pci_release_regions after pci_disable_device Don Brace
2015-02-21 22:20 ` [PATCH 32/43] hpsa: skip free_irq calls if irqs are not allocated Don Brace
2015-02-21 22:20 ` [PATCH 33/43] hpsa: cleanup for init_one step 2 in kdump Don Brace
2015-02-21 22:20 ` [PATCH 34/43] hpsa: fix try_soft_reset error handling Don Brace
2015-02-21 22:20 ` [PATCH 35/43] hpsa: create workqueue after the driver is ready for use Don Brace
2015-02-21 22:20 ` [PATCH 36/43] hpsa: add interrupt number to /proc/interrupts interrupt name Don Brace
2015-02-21 22:20 ` [PATCH 37/43] hpsa: use block layer tag for command allocation Don Brace
2015-02-23 20:25 ` Christoph Hellwig
2015-02-24 20:51 ` brace
2015-02-21 22:20 ` [PATCH 38/43] hpsa: clean up new block layer tag error handling Don Brace
2015-02-23 20:25 ` Christoph Hellwig
2015-02-24 17:39 ` brace
2015-02-21 22:21 ` [PATCH 39/43] hpsa: use scsi host_no as hpsa controller number Don Brace
2015-02-21 22:21 ` [PATCH 40/43] hpsa: cleanup initialization code Don Brace
2015-02-23 20:26 ` Christoph Hellwig
2015-02-24 21:29 ` brace
2015-02-21 22:21 ` [PATCH 41/43] hpsa: propagate the error code in hpsa_kdump_soft_reset Don Brace
2015-02-21 22:21 ` [PATCH 42/43] hpsa: cleanup reset Don Brace
2015-02-21 22:21 ` [PATCH 43/43] hpsa: change driver version Don Brace
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150221221903.21954.6173.stgit@brunhilda \
--to=don.brace@pmcs.com \
--cc=Justin.Lindley@pmcs.com \
--cc=Kevin.Barnett@pmcs.com \
--cc=brace@pmcs.com \
--cc=hch@infradead.org \
--cc=james.bottomley@parallels.com \
--cc=linux-scsi@vger.kernel.org \
--cc=scott.teel@pmcs.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox