From: Don Brace <don.brace@pmcs.com>
To: scott.teel@pmcs.com, Kevin.Barnett@pmcs.com,
james.bottomley@parallels.com, hch@infradead.org,
Justin.Lindley@pmcs.com, brace@pmcs.com
Cc: linux-scsi@vger.kernel.org
Subject: [PATCH 27/43] hpsa: use helper routines for finishing commands
Date: Sat, 21 Feb 2015 16:19:55 -0600 [thread overview]
Message-ID: <20150221221955.21954.52268.stgit@brunhilda> (raw)
In-Reply-To: <20150221221553.21954.32599.stgit@brunhilda>
From: Webb Scales <webbnh@hp.com>
cleanup command completions
Reviewed-by: Scott Teel <scott.teel@pmcs.com>
Reviewed-by: Kevin Barnett <kevin.barnett@pmcs.com>
Signed-off-by: Webb Scales <webbnh@hp.com>
Signed-off-by: Don Brace <don.brace@pmcs.com>
---
drivers/scsi/hpsa.c | 78 ++++++++++++++++++++-------------------------------
1 file changed, 31 insertions(+), 47 deletions(-)
diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index 14e5973..29a86b3 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -2026,6 +2026,19 @@ static int handle_ioaccel_mode2_error(struct ctlr_info *h,
return retry; /* retry on raid path? */
}
+static void hpsa_cmd_free_and_done(struct ctlr_info *h,
+ struct CommandList *c, struct scsi_cmnd *cmd)
+{
+ cmd_free(h, c);
+ cmd->scsi_done(cmd);
+}
+
+static void hpsa_retry_cmd(struct ctlr_info *h, struct CommandList *c)
+{
+ INIT_WORK(&c->work, hpsa_command_resubmit_worker);
+ queue_work_on(raw_smp_processor_id(), h->resubmit_wq, &c->work);
+}
+
static void process_ioaccel2_completion(struct ctlr_info *h,
struct CommandList *c, struct scsi_cmnd *cmd,
struct hpsa_scsi_dev_t *dev)
@@ -2034,13 +2047,11 @@ static void process_ioaccel2_completion(struct ctlr_info *h,
/* check for good status */
if (likely(c2->error_data.serv_response == 0 &&
- c2->error_data.status == 0)) {
- cmd_free(h, c);
- cmd->scsi_done(cmd);
- return;
- }
+ c2->error_data.status == 0))
+ return hpsa_cmd_free_and_done(h, c, cmd);
- /* Any RAID offload error results in retry which will use
+ /*
+ * Any RAID offload error results in retry which will use
* the normal I/O path so the controller can handle whatever's
* wrong.
*/
@@ -2050,19 +2061,14 @@ static void process_ioaccel2_completion(struct ctlr_info *h,
if (c2->error_data.status ==
IOACCEL2_STATUS_SR_IOACCEL_DISABLED)
dev->offload_enabled = 0;
- goto retry_cmd;
+
+ return hpsa_retry_cmd(h, c);
}
if (handle_ioaccel_mode2_error(h, c, cmd, c2))
- goto retry_cmd;
-
- cmd_free(h, c);
- cmd->scsi_done(cmd);
- return;
+ return hpsa_retry_cmd(h, c);
-retry_cmd:
- INIT_WORK(&c->work, hpsa_command_resubmit_worker);
- queue_work_on(raw_smp_processor_id(), h->resubmit_wq, &c->work);
+ return hpsa_cmd_free_and_done(h, c, cmd);
}
/* Returns 0 on success, < 0 otherwise. */
@@ -2135,22 +2141,15 @@ static void complete_scsi_command(struct CommandList *cp)
if (unlikely(ei->CommandStatus == CMD_CTLR_LOCKUP)) {
/* DID_NO_CONNECT will prevent a retry */
cmd->result = DID_NO_CONNECT << 16;
- cmd_free(h, cp);
- cmd->scsi_done(cmd);
- return;
+ return hpsa_cmd_free_and_done(h, cp, cmd);
}
if (cp->cmd_type == CMD_IOACCEL2)
return process_ioaccel2_completion(h, cp, cmd, dev);
scsi_set_resid(cmd, ei->ResidualCnt);
- if (ei->CommandStatus == 0) {
- if (cp->cmd_type == CMD_IOACCEL1)
- atomic_dec(&cp->phys_disk->ioaccel_cmds_out);
- cmd_free(h, cp);
- cmd->scsi_done(cmd);
- return;
- }
+ if (ei->CommandStatus == 0)
+ return hpsa_cmd_free_and_done(h, cp, cmd);
/* For I/O accelerator commands, copy over some fields to the normal
* CISS header used below for error handling.
@@ -2172,10 +2171,7 @@ static void complete_scsi_command(struct CommandList *cp)
if (is_logical_dev_addr_mode(dev->scsi3addr)) {
if (ei->CommandStatus == CMD_IOACCEL_DISABLED)
dev->offload_enabled = 0;
- INIT_WORK(&cp->work, hpsa_command_resubmit_worker);
- queue_work_on(raw_smp_processor_id(),
- h->resubmit_wq, &cp->work);
- return;
+ return hpsa_retry_cmd(h, cp);
}
}
@@ -2306,8 +2302,8 @@ static void complete_scsi_command(struct CommandList *cp)
dev_warn(&h->pdev->dev, "cp %p returned unknown status %x\n",
cp, ei->CommandStatus);
}
- cmd_free(h, cp);
- cmd->scsi_done(cmd);
+
+ return hpsa_cmd_free_and_done(h, cp, cmd);
}
static void hpsa_pci_unmap(struct pci_dev *pdev,
@@ -4560,16 +4556,13 @@ static void hpsa_command_resubmit_worker(struct work_struct *work)
{
struct scsi_cmnd *cmd;
struct hpsa_scsi_dev_t *dev;
- struct CommandList *c =
- container_of(work, struct CommandList, work);
+ struct CommandList *c = container_of(work, struct CommandList, work);
cmd = c->scsi_cmd;
dev = cmd->device->hostdata;
if (!dev) {
cmd->result = DID_NO_CONNECT << 16;
- cmd_free(c->h, c);
- cmd->scsi_done(cmd);
- return;
+ return hpsa_cmd_free_and_done(c->h, c, cmd);
}
if (c->cmd_type == CMD_IOACCEL2) {
struct ctlr_info *h = c->h;
@@ -4588,12 +4581,7 @@ static void hpsa_command_resubmit_worker(struct work_struct *work)
* then get SCSI_MLQUEUE_HOST_BUSY.
*/
cmd->result = DID_IMM_RETRY << 16;
- cmd->scsi_done(cmd);
- cmd_free(h, c); /* FIX-ME: on merge, change
- * to cmd_tagged_free() and
- * ultimately to
- * hpsa_cmd_free_and_done(). */
- return;
+ return hpsa_cmd_free_and_done(h, c, cmd);
}
/* else, fall thru and resubmit down CISS path */
}
@@ -4657,9 +4645,7 @@ static int hpsa_scsi_queue_command(struct Scsi_Host *sh, struct scsi_cmnd *cmd)
if (rc == 0)
return 0;
if (rc == SCSI_MLQUEUE_HOST_BUSY) {
- cmd_free(h, c); /* FIX-ME: on merge, change to
- * cmd_tagged_free(), and ultimately
- * to hpsa_cmd_resolve_and_free(). */
+ cmd_free(h, c);
return SCSI_MLQUEUE_HOST_BUSY;
}
}
@@ -7777,8 +7763,6 @@ static void hpsa_flush_cache(struct ctlr_info *h)
struct CommandList *c;
int rc;
- /* Don't bother trying to flush the cache if locked up */
- /* FIXME not necessary if do_simple_cmd does the check */
if (unlikely(lockup_detected(h)))
return;
flush_buf = kzalloc(4, GFP_KERNEL);
next prev parent reply other threads:[~2015-02-21 22:21 UTC|newest]
Thread overview: 58+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-02-21 22:17 [PATCH 00/43] hpsa updates Don Brace
2015-02-21 22:17 ` [PATCH 01/43] hpsa: add masked physical devices into h->dev[] array Don Brace
2015-02-23 20:14 ` Christoph Hellwig
2015-02-26 15:17 ` brace
2015-03-05 13:34 ` Christoph Hellwig
2015-02-21 22:17 ` [PATCH 02/43] hpsa: clean up host, channel, target, lun prints Don Brace
2015-02-23 20:16 ` Christoph Hellwig
2015-02-26 14:50 ` brace
2015-02-21 22:17 ` [PATCH 03/43] hpsa: rework controller command submission Don Brace
2015-02-21 22:17 ` [PATCH 04/43] hpsa: clean up aborts Don Brace
2015-02-21 22:17 ` [PATCH 05/43] hpsa: decrement h->commands_outstanding in fail_all_outstanding_cmds Don Brace
2015-02-21 22:18 ` [PATCH 06/43] hpsa: hpsa decode sense data for io and tmf Don Brace
2015-02-23 20:18 ` Christoph Hellwig
2015-02-25 18:06 ` brace
2015-02-21 22:18 ` [PATCH 07/43] hpsa: allow lockup detected to be viewed via sysfs Don Brace
2015-02-21 22:18 ` [PATCH 08/43] hpsa: make function names consistent Don Brace
2015-02-21 22:18 ` [PATCH 09/43] hpsa: factor out hpsa_init_cmd function Don Brace
2015-02-21 22:18 ` [PATCH 10/43] hpsa: do not ignore return value of hpsa_register_scsi Don Brace
2015-02-23 20:18 ` Christoph Hellwig
2015-02-21 22:18 ` [PATCH 11/43] hpsa: try resubmitting down raid path on task set full Don Brace
2015-02-21 22:18 ` [PATCH 12/43] hpsa: factor out hpsa_ioaccel_submit function Don Brace
2015-02-21 22:18 ` [PATCH 13/43] hpsa: print accurate SSD Smart Path Enabled status Don Brace
2015-02-21 22:18 ` [PATCH 14/43] hpsa: use ioaccel2 path to submit IOs to physical drives in HBA mode Don Brace
2015-02-21 22:18 ` [PATCH 15/43] hpsa: Get queue depth from identify physical bmic for physical disks Don Brace
2015-02-21 22:18 ` [PATCH 16/43] hpsa: break hpsa_free_irqs_and_disable_msix into two functions Don Brace
2015-02-21 22:19 ` [PATCH 17/43] hpsa: clean up error handling Don Brace
2015-02-21 22:19 ` [PATCH 18/43] hpsa: refactor freeing of resources into more logical functions Don Brace
2015-02-21 22:19 ` [PATCH 19/43] hpsa: add ioaccel sg chaining for the ioaccel2 path Don Brace
2015-02-21 22:19 ` [PATCH 20/43] hpsa: add more ioaccel2 error handling, including underrun statuses Don Brace
2015-02-21 22:19 ` [PATCH 21/43] hpsa: do not check cmd_alloc return value - it cannnot return NULL Don Brace
2015-02-21 22:19 ` [PATCH 22/43] hpsa: correct return values from driver functions Don Brace
2015-02-21 22:19 ` [PATCH 23/43] hpsa: clean up driver init Don Brace
2015-02-21 22:19 ` [PATCH 24/43] hpsa: clean up some error reporting output in abort handler Don Brace
2015-02-21 22:19 ` [PATCH 25/43] hpsa: do not print ioaccel2 warning messages about unusual completions Don Brace
2015-02-21 22:19 ` [PATCH 26/43] hpsa: add support sending aborts to physical devices via the ioaccel2 path Don Brace
2015-02-21 22:19 ` Don Brace [this message]
2015-02-21 22:20 ` [PATCH 28/43] hpsa: don't return abort request until target is complete Don Brace
2015-02-21 22:20 ` [PATCH 29/43] hpsa: refactor and rework support for sending TEST_UNIT_READY Don Brace
2015-02-21 22:20 ` [PATCH 30/43] hpsa: performance tweak for hpsa_scatter_gather() Don Brace
2015-02-21 22:20 ` [PATCH 31/43] hpsa: call pci_release_regions after pci_disable_device Don Brace
2015-02-21 22:20 ` [PATCH 32/43] hpsa: skip free_irq calls if irqs are not allocated Don Brace
2015-02-21 22:20 ` [PATCH 33/43] hpsa: cleanup for init_one step 2 in kdump Don Brace
2015-02-21 22:20 ` [PATCH 34/43] hpsa: fix try_soft_reset error handling Don Brace
2015-02-21 22:20 ` [PATCH 35/43] hpsa: create workqueue after the driver is ready for use Don Brace
2015-02-21 22:20 ` [PATCH 36/43] hpsa: add interrupt number to /proc/interrupts interrupt name Don Brace
2015-02-21 22:20 ` [PATCH 37/43] hpsa: use block layer tag for command allocation Don Brace
2015-02-23 20:25 ` Christoph Hellwig
2015-02-24 20:51 ` brace
2015-02-21 22:20 ` [PATCH 38/43] hpsa: clean up new block layer tag error handling Don Brace
2015-02-23 20:25 ` Christoph Hellwig
2015-02-24 17:39 ` brace
2015-02-21 22:21 ` [PATCH 39/43] hpsa: use scsi host_no as hpsa controller number Don Brace
2015-02-21 22:21 ` [PATCH 40/43] hpsa: cleanup initialization code Don Brace
2015-02-23 20:26 ` Christoph Hellwig
2015-02-24 21:29 ` brace
2015-02-21 22:21 ` [PATCH 41/43] hpsa: propagate the error code in hpsa_kdump_soft_reset Don Brace
2015-02-21 22:21 ` [PATCH 42/43] hpsa: cleanup reset Don Brace
2015-02-21 22:21 ` [PATCH 43/43] hpsa: change driver version Don Brace
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150221221955.21954.52268.stgit@brunhilda \
--to=don.brace@pmcs.com \
--cc=Justin.Lindley@pmcs.com \
--cc=Kevin.Barnett@pmcs.com \
--cc=brace@pmcs.com \
--cc=hch@infradead.org \
--cc=james.bottomley@parallels.com \
--cc=linux-scsi@vger.kernel.org \
--cc=scott.teel@pmcs.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox