* [PATCH 01/43] hpsa: add masked physical devices into h->dev[] array
2015-02-21 22:17 [PATCH 00/43] hpsa updates Don Brace
@ 2015-02-21 22:17 ` Don Brace
2015-02-23 20:14 ` Christoph Hellwig
2015-02-21 22:17 ` [PATCH 02/43] hpsa: clean up host, channel, target, lun prints Don Brace
` (41 subsequent siblings)
42 siblings, 1 reply; 58+ messages in thread
From: Don Brace @ 2015-02-21 22:17 UTC (permalink / raw)
To: scott.teel, Kevin.Barnett, james.bottomley, hch, Justin.Lindley,
brace
Cc: linux-scsi
From: Stephen Cameron <stephenmcameron@gmail.com>
Cache the ioaccel handle so that when we need to abort commands sent
down the ioaccel2 path, we can look up the LUN ID in h->dev[] instead of
having to do I/O to the controller.
Add a field to elements in h->dev[] to keep track of how the device is exposed
to the SCSI mid layer: Not at all, without an upper level driver
(no_uld_attach) or normally exposed.
Since masked physical devices are now present in h->dev[] array
it would be perfectly possible to do
echo scsi add-single-device 2 2 0 0 > /proc/scsi/scsi
and bring them online. This was previously not allowed for masked
physical devices.
Ensure that the mapping of physical disks to logical drives gets updated in a
consistent way when a RAID migration occurs and is not touched until updates
to it are complete.
now instead of doing CISS_REPORT_PHYSICAL to get the LUNID for
the physical disk in hpsa_get_pdisk_of_ioaccel2(), just get
it out of h->dev[] where we already have it cached.
do not touch phys_disk[] for ioaccel enabled logical drives during rescan
Reviewed-by: Scott Teel <scott.teel@pmcs.com>
Reviewed-by: Kevin Barnett <kevin.barnett@pmcs.com>
Signed-off-by: Don Brace <don.brace@pmcs.com>
---
drivers/scsi/hpsa.c | 255 +++++++++++++++++++++++++----------------------
drivers/scsi/hpsa.h | 6 +
drivers/scsi/hpsa_cmd.h | 3 +
3 files changed, 146 insertions(+), 118 deletions(-)
diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index a1cfbd3..5f12f32 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -222,6 +222,7 @@ static int hpsa_change_queue_depth(struct scsi_device *sdev, int qdepth);
static int hpsa_eh_device_reset_handler(struct scsi_cmnd *scsicmd);
static int hpsa_eh_abort_handler(struct scsi_cmnd *scsicmd);
static int hpsa_slave_alloc(struct scsi_device *sdev);
+static int hpsa_slave_configure(struct scsi_device *sdev);
static void hpsa_slave_destroy(struct scsi_device *sdev);
static void hpsa_update_scsi_devices(struct ctlr_info *h, int hostno);
@@ -667,6 +668,9 @@ static struct device_attribute *hpsa_shost_attrs[] = {
NULL,
};
+#define HPSA_NRESERVED_CMDS (HPSA_CMDS_RESERVED_FOR_ABORTS + \
+ HPSA_CMDS_RESERVED_FOR_DRIVER + HPSA_MAX_CONCURRENT_PASSTHRUS)
+
static struct scsi_host_template hpsa_driver_template = {
.module = THIS_MODULE,
.name = HPSA,
@@ -681,6 +685,7 @@ static struct scsi_host_template hpsa_driver_template = {
.eh_device_reset_handler = hpsa_eh_device_reset_handler,
.ioctl = hpsa_ioctl,
.slave_alloc = hpsa_slave_alloc,
+ .slave_configure = hpsa_slave_configure,
.slave_destroy = hpsa_slave_destroy,
#ifdef CONFIG_COMPAT
.compat_ioctl = hpsa_compat_ioctl,
@@ -946,6 +951,8 @@ lun_assigned:
h->dev[n] = device;
h->ndevices++;
+ device->offload_to_be_enabled = device->offload_enabled;
+ device->offload_enabled = 0;
added[*nadded] = device;
(*nadded)++;
@@ -982,16 +989,20 @@ static void hpsa_scsi_update_entry(struct ctlr_info *h, int hostno,
*/
h->dev[entry]->raid_map = new_entry->raid_map;
h->dev[entry]->ioaccel_handle = new_entry->ioaccel_handle;
- wmb(); /* ensure raid map updated prior to ->offload_enabled */
}
h->dev[entry]->offload_config = new_entry->offload_config;
h->dev[entry]->offload_to_mirror = new_entry->offload_to_mirror;
- h->dev[entry]->offload_enabled = new_entry->offload_enabled;
h->dev[entry]->queue_depth = new_entry->queue_depth;
- dev_info(&h->pdev->dev, "%s device c%db%dt%dl%d updated.\n",
- scsi_device_type(new_entry->devtype), hostno, new_entry->bus,
- new_entry->target, new_entry->lun);
+ /*
+ * We can turn off ioaccel offload now, but need to delay turning
+ * it on until we can update h->dev[entry]->phys_disk[], but we
+ * can't do that until all the devices are updated.
+ */
+ h->dev[entry]->offload_to_be_enabled = new_entry->offload_enabled;
+ if (!new_entry->offload_enabled)
+ h->dev[entry]->offload_enabled = 0;
+
}
/* Replace an entry from h->dev[] array. */
@@ -1014,6 +1025,8 @@ static void hpsa_scsi_replace_entry(struct ctlr_info *h, int hostno,
new_entry->lun = h->dev[entry]->lun;
}
+ new_entry->offload_to_be_enabled = new_entry->offload_enabled;
+ new_entry->offload_enabled = 0;
h->dev[entry] = new_entry;
added[*nadded] = new_entry;
(*nadded)++;
@@ -1312,6 +1325,7 @@ static void hpsa_figure_phys_disk_ptrs(struct ctlr_info *h,
*/
if (!logical_drive->phys_disk[i]) {
logical_drive->offload_enabled = 0;
+ logical_drive->offload_to_be_enabled = 0;
logical_drive->queue_depth = h->nr_cmds;
}
}
@@ -1335,6 +1349,16 @@ static void hpsa_update_log_drive_phys_drive_ptrs(struct ctlr_info *h,
continue;
if (!is_logical_dev_addr_mode(dev[i]->scsi3addr))
continue;
+
+ /*
+ * If offload is currently enabled, the RAID map and
+ * phys_disk[] assignment *better* not be changing
+ * and since it isn't changing, we do not need to
+ * update it.
+ */
+ if (dev[i]->offload_enabled)
+ continue;
+
hpsa_figure_phys_disk_ptrs(h, dev, ndevices, dev[i]);
}
}
@@ -1433,6 +1457,14 @@ static void adjust_hpsa_scsi_table(struct ctlr_info *h, int hostno,
/* but if it does happen, we just ignore that device */
}
}
+ hpsa_update_log_drive_phys_drive_ptrs(h, h->dev, h->ndevices);
+
+ /* Now that h->dev[]->phys_disk[] is coherent, we can enable
+ * any logical drives that need it enabled.
+ */
+ for (i = 0; i < h->ndevices; i++)
+ h->dev[i]->offload_enabled = h->dev[i]->offload_to_be_enabled;
+
spin_unlock_irqrestore(&h->devlock, flags);
/* Monitor devices which are in one of several NOT READY states to be
@@ -1456,20 +1488,24 @@ static void adjust_hpsa_scsi_table(struct ctlr_info *h, int hostno,
sh = h->scsi_host;
/* Notify scsi mid layer of any removed devices */
for (i = 0; i < nremoved; i++) {
- struct scsi_device *sdev =
- scsi_device_lookup(sh, removed[i]->bus,
- removed[i]->target, removed[i]->lun);
- if (sdev != NULL) {
- scsi_remove_device(sdev);
- scsi_device_put(sdev);
- } else {
- /* We don't expect to get here.
- * future cmds to this device will get selection
- * timeout as if the device was gone.
- */
- dev_warn(&h->pdev->dev, "didn't find c%db%dt%dl%d "
- " for removal.", hostno, removed[i]->bus,
- removed[i]->target, removed[i]->lun);
+ if (removed[i]->expose_state & HPSA_SCSI_ADD) {
+ struct scsi_device *sdev =
+ scsi_device_lookup(sh, removed[i]->bus,
+ removed[i]->target, removed[i]->lun);
+ if (sdev != NULL) {
+ scsi_remove_device(sdev);
+ scsi_device_put(sdev);
+ } else {
+ /*
+ * We don't expect to get here.
+ * future cmds to this device will get selection
+ * timeout as if the device was gone.
+ */
+ dev_warn(&h->pdev->dev,
+ "didn't find c%db%dt%dl%d for removal.\n",
+ hostno, removed[i]->bus,
+ removed[i]->target, removed[i]->lun);
+ }
}
kfree(removed[i]);
removed[i] = NULL;
@@ -1477,6 +1513,8 @@ static void adjust_hpsa_scsi_table(struct ctlr_info *h, int hostno,
/* Notify scsi mid layer of any added devices */
for (i = 0; i < nadded; i++) {
+ if (!(added[i]->expose_state & HPSA_SCSI_ADD))
+ continue;
if (scsi_add_device(sh, added[i]->bus,
added[i]->target, added[i]->lun) == 0)
continue;
@@ -1512,23 +1550,49 @@ static struct hpsa_scsi_dev_t *lookup_hpsa_scsi_dev(struct ctlr_info *h,
return NULL;
}
-/* link sdev->hostdata to our per-device structure. */
static int hpsa_slave_alloc(struct scsi_device *sdev)
{
struct hpsa_scsi_dev_t *sd;
unsigned long flags;
struct ctlr_info *h;
+ int queue_depth;
h = sdev_to_hba(sdev);
spin_lock_irqsave(&h->devlock, flags);
sd = lookup_hpsa_scsi_dev(h, sdev_channel(sdev),
sdev_id(sdev), sdev->lun);
- if (sd != NULL) {
- sdev->hostdata = sd;
- if (sd->queue_depth)
+
+ if (likely(sd)) {
scsi_change_queue_depth(sdev, sd->queue_depth);
atomic_set(&sd->ioaccel_cmds_out, 0);
+ sdev->hostdata = (sd->expose_state & HPSA_SCSI_ADD) ? sd : NULL;
+ queue_depth = sd->queue_depth != 0 ?
+ sd->queue_depth : sdev->host->can_queue;
+ } else {
+ sdev->hostdata = NULL;
+ queue_depth = sdev->host->can_queue;
}
+
+ if (shost_use_blk_mq(sdev->host))
+ scsi_change_queue_depth(sdev, queue_depth);
+ else /* We depend on tags for cmd allocation. */
+ sdev->tagged_supported = 1;
+
+ spin_unlock_irqrestore(&h->devlock, flags);
+ return 0;
+}
+
+/* configure scsi device based on internal per-device structure */
+static int hpsa_slave_configure(struct scsi_device *sdev)
+{
+ struct hpsa_scsi_dev_t *sd;
+ unsigned long flags;
+ struct ctlr_info *h;
+
+ h = sdev_to_hba(sdev);
+ spin_lock_irqsave(&h->devlock, flags);
+ sd = sdev->hostdata;
+ sdev->no_uld_attach = !sd || !(sd->expose_state & HPSA_ULD_ATTACH);
spin_unlock_irqrestore(&h->devlock, flags);
return 0;
}
@@ -2438,6 +2502,7 @@ static void hpsa_get_ioaccel_status(struct ctlr_info *h,
this_device->offload_config = 0;
this_device->offload_enabled = 0;
+ this_device->offload_to_be_enabled = 0;
buf = kzalloc(64, GFP_KERNEL);
if (!buf)
@@ -2461,6 +2526,7 @@ static void hpsa_get_ioaccel_status(struct ctlr_info *h,
if (hpsa_get_raid_map(h, scsi3addr, this_device))
this_device->offload_enabled = 0;
}
+ this_device->offload_to_be_enabled = this_device->offload_enabled;
out:
kfree(buf);
return;
@@ -2708,6 +2774,7 @@ static int hpsa_update_device_info(struct ctlr_info *h,
this_device->raid_level = RAID_UNKNOWN;
this_device->offload_config = 0;
this_device->offload_enabled = 0;
+ this_device->offload_to_be_enabled = 0;
this_device->volume_offline = 0;
this_device->queue_depth = h->nr_cmds;
}
@@ -2850,88 +2917,23 @@ static int add_ext_target_dev(struct ctlr_info *h,
static int hpsa_get_pdisk_of_ioaccel2(struct ctlr_info *h,
struct CommandList *ioaccel2_cmd_to_abort, unsigned char *scsi3addr)
{
- struct ReportExtendedLUNdata *physicals = NULL;
- int responsesize = 24; /* size of physical extended response */
- int reportsize = sizeof(*physicals) + HPSA_MAX_PHYS_LUN * responsesize;
- u32 nphysicals = 0; /* number of reported physical devs */
- int found = 0; /* found match (1) or not (0) */
- u32 find; /* handle we need to match */
+ struct io_accel2_cmd *c2 =
+ &h->ioaccel2_cmd_pool[ioaccel2_cmd_to_abort->cmdindex];
+ unsigned long flags;
int i;
- struct scsi_cmnd *scmd; /* scsi command within request being aborted */
- struct hpsa_scsi_dev_t *d; /* device of request being aborted */
- struct io_accel2_cmd *c2a; /* ioaccel2 command to abort */
- __le32 it_nexus; /* 4 byte device handle for the ioaccel2 cmd */
- __le32 scsi_nexus; /* 4 byte device handle for the ioaccel2 cmd */
-
- if (ioaccel2_cmd_to_abort->cmd_type != CMD_IOACCEL2)
- return 0; /* no match */
-
- /* point to the ioaccel2 device handle */
- c2a = &h->ioaccel2_cmd_pool[ioaccel2_cmd_to_abort->cmdindex];
- if (c2a == NULL)
- return 0; /* no match */
-
- scmd = (struct scsi_cmnd *) ioaccel2_cmd_to_abort->scsi_cmd;
- if (scmd == NULL)
- return 0; /* no match */
-
- d = scmd->device->hostdata;
- if (d == NULL)
- return 0; /* no match */
-
- it_nexus = cpu_to_le32(d->ioaccel_handle);
- scsi_nexus = c2a->scsi_nexus;
- find = le32_to_cpu(c2a->scsi_nexus);
-
- if (h->raid_offload_debug > 0)
- dev_info(&h->pdev->dev,
- "%s: scsi_nexus:0x%08x device id: 0x%02x%02x%02x%02x %02x%02x%02x%02x %02x%02x%02x%02x %02x%02x%02x%02x\n",
- __func__, scsi_nexus,
- d->device_id[0], d->device_id[1], d->device_id[2],
- d->device_id[3], d->device_id[4], d->device_id[5],
- d->device_id[6], d->device_id[7], d->device_id[8],
- d->device_id[9], d->device_id[10], d->device_id[11],
- d->device_id[12], d->device_id[13], d->device_id[14],
- d->device_id[15]);
-
- /* Get the list of physical devices */
- physicals = kzalloc(reportsize, GFP_KERNEL);
- if (physicals == NULL)
- return 0;
- if (hpsa_scsi_do_report_phys_luns(h, physicals, reportsize)) {
- dev_err(&h->pdev->dev,
- "Can't lookup %s device handle: report physical LUNs failed.\n",
- "HP SSD Smart Path");
- kfree(physicals);
- return 0;
- }
- nphysicals = be32_to_cpu(*((__be32 *)physicals->LUNListLength)) /
- responsesize;
-
- /* find ioaccel2 handle in list of physicals: */
- for (i = 0; i < nphysicals; i++) {
- struct ext_report_lun_entry *entry = &physicals->LUN[i];
-
- /* handle is in bytes 28-31 of each lun */
- if (entry->ioaccel_handle != find)
- continue; /* didn't match */
- found = 1;
- memcpy(scsi3addr, entry->lunid, 8);
- if (h->raid_offload_debug > 0)
- dev_info(&h->pdev->dev,
- "%s: Searched h=0x%08x, Found h=0x%08x, scsiaddr 0x%8phN\n",
- __func__, find,
- entry->ioaccel_handle, scsi3addr);
- break; /* found it */
- }
-
- kfree(physicals);
- if (found)
- return 1;
- else
- return 0;
+ spin_lock_irqsave(&h->devlock, flags);
+ for (i = 0; i < h->ndevices; i++)
+ if (h->dev[i]->ioaccel_handle == le32_to_cpu(c2->scsi_nexus)) {
+ memcpy(scsi3addr, h->dev[i]->scsi3addr,
+ sizeof(h->dev[i]->scsi3addr));
+ spin_unlock_irqrestore(&h->devlock, flags);
+ return 1;
+ }
+ spin_unlock_irqrestore(&h->devlock, flags);
+ return 0;
}
+
/*
* Do CISS_REPORT_PHYS and CISS_REPORT_LOG. Data is returned in physdev,
* logdev. The number of luns in physdev and logdev are returned in
@@ -3142,10 +3144,12 @@ static void hpsa_update_scsi_devices(struct ctlr_info *h, int hostno)
/* Figure out where the LUN ID info is coming from */
lunaddrbytes = figure_lunaddrbytes(h, raid_ctlr_position,
i, nphysicals, nlogicals, physdev_list, logdev_list);
- /* skip masked physical devices. */
- if (lunaddrbytes[3] & 0xC0 &&
- i < nphysicals + (raid_ctlr_position == 0))
- continue;
+
+ /* skip masked non-disk devices */
+ if (MASKED_DEVICE(lunaddrbytes))
+ if (i < nphysicals + (raid_ctlr_position == 0) &&
+ NON_DISK_PHYS_DEV(lunaddrbytes))
+ continue;
/* Get device type, vendor, model, device id */
if (hpsa_update_device_info(h, lunaddrbytes, tmpdevice,
@@ -3170,6 +3174,18 @@ static void hpsa_update_scsi_devices(struct ctlr_info *h, int hostno)
*this_device = *tmpdevice;
+ /* do not expose masked devices */
+ if (MASKED_DEVICE(lunaddrbytes) &&
+ i < nphysicals + (raid_ctlr_position == 0)) {
+ if (h->hba_mode_enabled)
+ dev_warn(&h->pdev->dev,
+ "Masked physical device detected\n");
+ this_device->expose_state = HPSA_DO_NOT_EXPOSE;
+ } else {
+ this_device->expose_state =
+ HPSA_SG_ATTACH | HPSA_ULD_ATTACH;
+ }
+
switch (this_device->devtype) {
case TYPE_ROM:
/* We don't *really* support actual CD-ROM devices,
@@ -3211,6 +3227,10 @@ static void hpsa_update_scsi_devices(struct ctlr_info *h, int hostno)
case TYPE_MEDIUM_CHANGER:
ncurrent++;
break;
+ case TYPE_ENCLOSURE:
+ if (h->hba_mode_enabled)
+ ncurrent++;
+ break;
case TYPE_RAID:
/* Only present the Smartarray HBA as a RAID controller.
* If it's a RAID controller other than the HBA itself
@@ -3227,7 +3247,6 @@ static void hpsa_update_scsi_devices(struct ctlr_info *h, int hostno)
if (ncurrent >= HPSA_MAX_DEVICES)
break;
}
- hpsa_update_log_drive_phys_drive_ptrs(h, currentsd, ncurrent);
adjust_hpsa_scsi_table(h, hostno, currentsd, ncurrent);
out:
kfree(tmpdevice);
@@ -4252,10 +4271,7 @@ static int hpsa_register_scsi(struct ctlr_info *h)
sh->max_cmd_len = MAX_COMMAND_SIZE;
sh->max_lun = HPSA_MAX_LUN;
sh->max_id = HPSA_MAX_LUN;
- sh->can_queue = h->nr_cmds -
- HPSA_CMDS_RESERVED_FOR_ABORTS -
- HPSA_CMDS_RESERVED_FOR_DRIVER -
- HPSA_MAX_CONCURRENT_PASSTHRUS;
+ sh->can_queue = h->nr_cmds - HPSA_NRESERVED_CMDS;
sh->cmd_per_lun = sh->can_queue;
sh->sg_tablesize = h->maxsgentries;
h->scsi_host = sh;
@@ -6097,18 +6113,21 @@ static int hpsa_find_cfgtables(struct ctlr_info *h)
static void hpsa_get_max_perf_mode_cmds(struct ctlr_info *h)
{
- h->max_commands = readl(&(h->cfgtable->MaxPerformantModeCommands));
+#define MIN_MAX_COMMANDS 16
+ BUILD_BUG_ON(MIN_MAX_COMMANDS <= HPSA_NRESERVED_CMDS);
+
+ h->max_commands = readl(&h->cfgtable->MaxPerformantModeCommands);
/* Limit commands in memory limited kdump scenario. */
if (reset_devices && h->max_commands > 32)
h->max_commands = 32;
- if (h->max_commands < 16) {
- dev_warn(&h->pdev->dev, "Controller reports "
- "max supported commands of %d, an obvious lie. "
- "Using 16. Ensure that firmware is up to date.\n",
- h->max_commands);
- h->max_commands = 16;
+ if (h->max_commands < MIN_MAX_COMMANDS) {
+ dev_warn(&h->pdev->dev,
+ "Controller reports max supported commands of %d Using %d instead. Ensure that firmware is up to date.\n",
+ h->max_commands,
+ MIN_MAX_COMMANDS);
+ h->max_commands = MIN_MAX_COMMANDS;
}
}
diff --git a/drivers/scsi/hpsa.h b/drivers/scsi/hpsa.h
index 6577130..58f3315 100644
--- a/drivers/scsi/hpsa.h
+++ b/drivers/scsi/hpsa.h
@@ -54,6 +54,7 @@ struct hpsa_scsi_dev_t {
u32 ioaccel_handle;
int offload_config; /* I/O accel RAID offload configured */
int offload_enabled; /* I/O accel RAID offload enabled */
+ int offload_to_be_enabled;
int offload_to_mirror; /* Send next I/O accelerator RAID
* offload request to mirror drive
*/
@@ -68,6 +69,11 @@ struct hpsa_scsi_dev_t {
* devices in order to honor physical device queue depth limits.
*/
struct hpsa_scsi_dev_t *phys_disk[RAID_MAP_MAX_ENTRIES];
+#define HPSA_DO_NOT_EXPOSE 0x0
+#define HPSA_SG_ATTACH 0x1
+#define HPSA_ULD_ATTACH 0x2
+#define HPSA_SCSI_ADD (HPSA_SG_ATTACH | HPSA_ULD_ATTACH)
+ u8 expose_state;
};
struct reply_queue_buffer {
diff --git a/drivers/scsi/hpsa_cmd.h b/drivers/scsi/hpsa_cmd.h
index 3a621c7..76d5499 100644
--- a/drivers/scsi/hpsa_cmd.h
+++ b/drivers/scsi/hpsa_cmd.h
@@ -240,6 +240,7 @@ struct ReportLUNdata {
struct ext_report_lun_entry {
u8 lunid[8];
+#define MASKED_DEVICE(x) ((x)[3] & 0xC0)
#define GET_BMIC_BUS(lunid) ((lunid)[7] & 0x3F)
#define GET_BMIC_LEVEL_TWO_TARGET(lunid) ((lunid)[6])
#define GET_BMIC_DRIVE_NUMBER(lunid) (((GET_BMIC_BUS((lunid)) - 1) << 8) + \
@@ -247,6 +248,8 @@ struct ext_report_lun_entry {
u8 wwid[8];
u8 device_type;
u8 device_flags;
+#define NON_DISK_PHYS_DEV(x) ((x)[17] & 0x01)
+#define PHYS_IOACCEL(x) ((x)[17] & 0x08)
u8 lun_count; /* multi-lun device, how many luns */
u8 redundant_paths;
u32 ioaccel_handle; /* ioaccel1 only uses lower 16 bits */
^ permalink raw reply related [flat|nested] 58+ messages in thread* Re: [PATCH 01/43] hpsa: add masked physical devices into h->dev[] array
2015-02-21 22:17 ` [PATCH 01/43] hpsa: add masked physical devices into h->dev[] array Don Brace
@ 2015-02-23 20:14 ` Christoph Hellwig
2015-02-26 15:17 ` brace
0 siblings, 1 reply; 58+ messages in thread
From: Christoph Hellwig @ 2015-02-23 20:14 UTC (permalink / raw)
To: Don Brace
Cc: scott.teel, Kevin.Barnett, james.bottomley, hch, Justin.Lindley,
brace, linux-scsi
> -/* link sdev->hostdata to our per-device structure. */
> static int hpsa_slave_alloc(struct scsi_device *sdev)
> {
> struct hpsa_scsi_dev_t *sd;
> unsigned long flags;
> struct ctlr_info *h;
> + int queue_depth;
>
> h = sdev_to_hba(sdev);
> spin_lock_irqsave(&h->devlock, flags);
> sd = lookup_hpsa_scsi_dev(h, sdev_channel(sdev),
> sdev_id(sdev), sdev->lun);
> - if (sd != NULL) {
> - sdev->hostdata = sd;
> - if (sd->queue_depth)
> +
> + if (likely(sd)) {
> scsi_change_queue_depth(sdev, sd->queue_depth);
Looks like the indentation is incorrect here.
> atomic_set(&sd->ioaccel_cmds_out, 0);
> + sdev->hostdata = (sd->expose_state & HPSA_SCSI_ADD) ? sd : NULL;
> + queue_depth = sd->queue_depth != 0 ?
> + sd->queue_depth : sdev->host->can_queue;
> + } else {
> + sdev->hostdata = NULL;
> + queue_depth = sdev->host->can_queue;
> }
> +
> + if (shost_use_blk_mq(sdev->host))
> + scsi_change_queue_depth(sdev, queue_depth);
But why do you have another call here only for the mq case?
Also in general I'd really prefer if you'd only change the queue
depth in ->slave_configure as most drivers do unless you have a good
reason to do it differently.
> + else /* We depend on tags for cmd allocation. */
> + sdev->tagged_supported = 1;
Since 3.19-rc1 you'll always get tags from the first command sent, as
we now moved the block tagging configuration earlier.
> +/* configure scsi device based on internal per-device structure */
> +static int hpsa_slave_configure(struct scsi_device *sdev)
> +{
> + struct hpsa_scsi_dev_t *sd;
> + unsigned long flags;
> + struct ctlr_info *h;
> +
> + h = sdev_to_hba(sdev);
> + spin_lock_irqsave(&h->devlock, flags);
> + sd = sdev->hostdata;
There should be no need to have this dereference inside the spinlock.
Also can you explain somewhere why some devices might not have this
hostdata set?
^ permalink raw reply [flat|nested] 58+ messages in thread* RE: [PATCH 01/43] hpsa: add masked physical devices into h->dev[] array
2015-02-23 20:14 ` Christoph Hellwig
@ 2015-02-26 15:17 ` brace
2015-03-05 13:34 ` Christoph Hellwig
0 siblings, 1 reply; 58+ messages in thread
From: brace @ 2015-02-26 15:17 UTC (permalink / raw)
To: Christoph Hellwig
Cc: Scott Teel, Kevin Barnett, james.bottomley@parallels.com,
Justin Lindley, brace, linux-scsi@vger.kernel.org
> -----Original Message-----
> From: Christoph Hellwig [mailto:hch@infradead.org]
> Sent: Monday, February 23, 2015 2:15 PM
> To: Don Brace
> Cc: Scott Teel; Kevin Barnett; james.bottomley@parallels.com;
> hch@infradead.org; Justin Lindley; brace; linux-scsi@vger.kernel.org
> Subject: Re: [PATCH 01/43] hpsa: add masked physical devices into h->dev[]
> array
>
> > -/* link sdev->hostdata to our per-device structure. */
> > static int hpsa_slave_alloc(struct scsi_device *sdev)
> > {
> > struct hpsa_scsi_dev_t *sd;
> > unsigned long flags;
> > struct ctlr_info *h;
> > + int queue_depth;
> >
> > h = sdev_to_hba(sdev);
> > spin_lock_irqsave(&h->devlock, flags);
> > sd = lookup_hpsa_scsi_dev(h, sdev_channel(sdev),
> > sdev_id(sdev), sdev->lun);
> > - if (sd != NULL) {
> > - sdev->hostdata = sd;
> > - if (sd->queue_depth)
> > +
> > + if (likely(sd)) {
> > scsi_change_queue_depth(sdev, sd->queue_depth);
>
> Looks like the indentation is incorrect here.
Corrected.
>
> > atomic_set(&sd->ioaccel_cmds_out, 0);
> > + sdev->hostdata = (sd->expose_state & HPSA_SCSI_ADD) ? sd :
> NULL;
> > + queue_depth = sd->queue_depth != 0 ?
> > + sd->queue_depth : sdev->host->can_queue;
> > + } else {
> > + sdev->hostdata = NULL;
> > + queue_depth = sdev->host->can_queue;
> > }
> > +
> > + if (shost_use_blk_mq(sdev->host))
> > + scsi_change_queue_depth(sdev, queue_depth);
>
> But why do you have another call here only for the mq case?
> Also in general I'd really prefer if you'd only change the queue
> depth in ->slave_configure as most drivers do unless you have a good
> reason to do it differently.
Thanks, I corrected the code. Also, I asked Webb about setting up the queue
Depth in slave_alloc. His reply was " We needed to get tagging set up during allocation so that we could use it in the lead-up to configuration, which is why it was done in hpsa_slave_alloc(); and, given that the code there was then already messing about with queue depth, it made sense to also deal with the rest of it there."
But given your next comment, perhaps I need to clean this up more?
>
> > + else /* We depend on tags for cmd allocation. */
> > + sdev->tagged_supported = 1;
>
> Since 3.19-rc1 you'll always get tags from the first command sent, as
> we now moved the block tagging configuration earlier.
>
> > +/* configure scsi device based on internal per-device structure */
> > +static int hpsa_slave_configure(struct scsi_device *sdev)
> > +{
> > + struct hpsa_scsi_dev_t *sd;
> > + unsigned long flags;
> > + struct ctlr_info *h;
> > +
> > + h = sdev_to_hba(sdev);
> > + spin_lock_irqsave(&h->devlock, flags);
> > + sd = sdev->hostdata;
>
> There should be no need to have this dereference inside the spinlock.
>
> Also can you explain somewhere why some devices might not have this
> hostdata set?
For our mixed mode controllers, we have started reporting all devices. The masked devices can be part of a logical volume, or it did not respond during the device scan. These do not get their hostdata set.
^ permalink raw reply [flat|nested] 58+ messages in thread* Re: [PATCH 01/43] hpsa: add masked physical devices into h->dev[] array
2015-02-26 15:17 ` brace
@ 2015-03-05 13:34 ` Christoph Hellwig
0 siblings, 0 replies; 58+ messages in thread
From: Christoph Hellwig @ 2015-03-05 13:34 UTC (permalink / raw)
To: brace
Cc: Christoph Hellwig, Scott Teel, Kevin Barnett,
james.bottomley@parallels.com, Justin Lindley,
linux-scsi@vger.kernel.org
On Thu, Feb 26, 2015 at 03:17:38PM +0000, brace wrote:
> Thanks, I corrected the code. Also, I asked Webb about setting up the queue
> Depth in slave_alloc. His reply was " We needed to get tagging set up during allocation so that we could use it in the lead-up to configuration, which is why it was done in hpsa_slave_alloc(); and, given that the code there was then already messing about with queue depth, it made sense to also deal with the rest of it there."
>
> But given your next comment, perhaps I need to clean this up more?
I think so. In older kernel we indeed had horrible APIs that mixed
setting up tagging with the queue depth, but this has all been sorted
out, so setting the queue depth in slave_alloc should not be nessecary
now.
^ permalink raw reply [flat|nested] 58+ messages in thread
* [PATCH 02/43] hpsa: clean up host, channel, target, lun prints
2015-02-21 22:17 [PATCH 00/43] hpsa updates Don Brace
2015-02-21 22:17 ` [PATCH 01/43] hpsa: add masked physical devices into h->dev[] array Don Brace
@ 2015-02-21 22:17 ` Don Brace
2015-02-23 20:16 ` Christoph Hellwig
2015-02-21 22:17 ` [PATCH 03/43] hpsa: rework controller command submission Don Brace
` (40 subsequent siblings)
42 siblings, 1 reply; 58+ messages in thread
From: Don Brace @ 2015-02-21 22:17 UTC (permalink / raw)
To: scott.teel, Kevin.Barnett, james.bottomley, hch, Justin.Lindley,
brace
Cc: linux-scsi
From: Webb Scales <webbnh@hp.com>
We had a mix of formats used for specifying controller, bus, target,
and lun address of devices.
change to the format used by the scsi midlayer and upper layer (2:3:0:0)
so you can easily follow the information from hpsa to scsi midlayer
to sd upper layer.
Also add this information:
- product ID
- vendor ID
- RAID level
- SSD Smath Path capable and enabled
- exposure level (sg-only)
Example:
hpsa 0000:04:00.0: added scsi 2:0:0:0: Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap+ En+ Exp=4
scsi 2:0:0:0: Direct-Access HP LOGICAL VOLUME 10.0 PQ: 0 ANSI: 5
sd 2:0:0:0: [sdr] 12501713072 512-byte logical blocks: (6.40 TB/5.82 TiB)
sd 2:0:0:0: [sdr] 4096-byte physical blocks
sd 2:0:0:0: [sdr] Attached SCSI disk
sd 2:0:0:0: Attached scsi generic sg20 type 0
Reviewed-by: Scott Teel <scott.teel@pmcs.com>
Reviewed-by: Kevin Barnett <kevin.barnett@pmcs.com>
Signed-off-by: Robert Elliott <elliott@hp.com>
Signed-off-by: Don Brace <don.brace@pmcs.com>
---
drivers/scsi/hpsa.c | 94 ++++++++++++++++++++++++++++++++++++---------------
1 file changed, 67 insertions(+), 27 deletions(-)
diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index 5f12f32..9a82ede 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -956,14 +956,18 @@ lun_assigned:
added[*nadded] = device;
(*nadded)++;
- /* initially, (before registering with scsi layer) we don't
- * know our hostno and we don't want to print anything first
- * time anyway (the scsi layer's inquiries will show that info)
- */
- /* if (hostno != -1) */
- dev_info(&h->pdev->dev, "%s device c%db%dt%dl%d added.\n",
- scsi_device_type(device->devtype), hostno,
- device->bus, device->target, device->lun);
+ dev_info(&h->pdev->dev,
+ "%6s scsi %d:%d:%d:%d: %s %.8s %.16s RAID-%s SSDSmartPathCap%c En%c Exp=%d\n",
+ device->expose_state & HPSA_SCSI_ADD ? "added" : "masked",
+ hostno, device->bus, device->target, device->lun,
+ scsi_device_type(device->devtype),
+ device->vendor,
+ device->model,
+ device->raid_level > RAID_UNKNOWN ?
+ "RAID-?" : raid_label[device->raid_level],
+ device->offload_config ? '+' : '-',
+ device->offload_enabled ? '+' : '-',
+ device->expose_state);
return 0;
}
@@ -1003,6 +1007,18 @@ static void hpsa_scsi_update_entry(struct ctlr_info *h, int hostno,
if (!new_entry->offload_enabled)
h->dev[entry]->offload_enabled = 0;
+ dev_info(&h->pdev->dev,
+ "updated scsi %d:%d:%d:%d: %s %.8s %.16s RAID-%s SSDSmartPathCap%c En%c Exp=%d\n",
+ hostno, h->dev[entry]->bus,
+ h->dev[entry]->target, h->dev[entry]->lun,
+ scsi_device_type(h->dev[entry]->devtype),
+ h->dev[entry]->vendor,
+ h->dev[entry]->model,
+ h->dev[entry]->raid_level > RAID_UNKNOWN ?
+ "RAID-?" : raid_label[h->dev[entry]->raid_level],
+ h->dev[entry]->offload_config ? '+' : '-',
+ h->dev[entry]->offload_enabled ? '+' : '-',
+ h->dev[entry]->expose_state);
}
/* Replace an entry from h->dev[] array. */
@@ -1030,9 +1046,17 @@ static void hpsa_scsi_replace_entry(struct ctlr_info *h, int hostno,
h->dev[entry] = new_entry;
added[*nadded] = new_entry;
(*nadded)++;
- dev_info(&h->pdev->dev, "%s device c%db%dt%dl%d changed.\n",
- scsi_device_type(new_entry->devtype), hostno, new_entry->bus,
- new_entry->target, new_entry->lun);
+ dev_info(&h->pdev->dev,
+ "replaced scsi %d:%d:%d:%d: %s %.8s %.16s RAID-%s SSDSmartPathCap%c En%c Exp=%d\n",
+ hostno, new_entry->bus, new_entry->target, new_entry->lun,
+ scsi_device_type(new_entry->devtype),
+ new_entry->vendor,
+ new_entry->model,
+ new_entry->raid_level > RAID_UNKNOWN ?
+ "RAID-?" : raid_label[new_entry->raid_level],
+ new_entry->offload_config ? '+' : '-',
+ new_entry->offload_enabled ? '+' : '-',
+ new_entry->expose_state);
}
/* Remove an entry from h->dev[] array. */
@@ -1052,9 +1076,17 @@ static void hpsa_scsi_remove_entry(struct ctlr_info *h, int hostno, int entry,
for (i = entry; i < h->ndevices-1; i++)
h->dev[i] = h->dev[i+1];
h->ndevices--;
- dev_info(&h->pdev->dev, "%s device c%db%dt%dl%d removed.\n",
- scsi_device_type(sd->devtype), hostno, sd->bus, sd->target,
- sd->lun);
+ dev_info(&h->pdev->dev,
+ "removed scsi %d:%d:%d:%d: %s %.8s %.16s RAID-%s SSDSmartPathCap%c En%c Exp=%d\n",
+ hostno, sd->bus, sd->target, sd->lun,
+ scsi_device_type(sd->devtype),
+ sd->vendor,
+ sd->model,
+ sd->raid_level > RAID_UNKNOWN ?
+ "RAID-?" : raid_label[sd->raid_level],
+ sd->offload_config ? '+' : '-',
+ sd->offload_enabled ? '+' : '-',
+ sd->expose_state);
}
#define SCSI3ADDR_EQ(a, b) ( \
@@ -1435,9 +1467,18 @@ static void adjust_hpsa_scsi_table(struct ctlr_info *h, int hostno,
*/
if (sd[i]->volume_offline) {
hpsa_show_volume_status(h, sd[i]);
- dev_info(&h->pdev->dev, "c%db%dt%dl%d: temporarily offline\n",
- h->scsi_host->host_no,
- sd[i]->bus, sd[i]->target, sd[i]->lun);
+ dev_info(&h->pdev->dev,
+ "offline scsi %d:%d:%d:%d: %s %.8s %.16s RAID-%s SSDSmartPathCap%c En%c Exp=%d\n",
+ hostno, sd[i]->bus, sd[i]->target, sd[i]->lun,
+ scsi_device_type(sd[i]->devtype),
+ sd[i]->vendor,
+ sd[i]->model,
+ sd[i]->raid_level > RAID_UNKNOWN ?
+ "RAID-?" :
+ raid_label[sd[i]->raid_level],
+ sd[i]->offload_config ? '+' : '-',
+ sd[i]->offload_enabled ? '+' : '-',
+ sd[i]->expose_state);
continue;
}
@@ -1501,8 +1542,8 @@ static void adjust_hpsa_scsi_table(struct ctlr_info *h, int hostno,
* future cmds to this device will get selection
* timeout as if the device was gone.
*/
- dev_warn(&h->pdev->dev,
- "didn't find c%db%dt%dl%d for removal.\n",
+ dev_warn(&h->pdev->dev,
+ "didn't find scsi %d:%d:%d:%d for removal.\n",
hostno, removed[i]->bus,
removed[i]->target, removed[i]->lun);
}
@@ -1518,8 +1559,9 @@ static void adjust_hpsa_scsi_table(struct ctlr_info *h, int hostno,
if (scsi_add_device(sh, added[i]->bus,
added[i]->target, added[i]->lun) == 0)
continue;
- dev_warn(&h->pdev->dev, "scsi_add_device c%db%dt%dl%d failed, "
- "device not added.\n", hostno, added[i]->bus,
+ dev_warn(&h->pdev->dev,
+ "scsi %d:%d:%d:%d addition failed, device not added.\n",
+ hostno, added[i]->bus,
added[i]->target, added[i]->lun);
/* now we have to remove it from h->dev,
* since it didn't get added to scsi mid layer
@@ -4383,7 +4425,6 @@ static int hpsa_eh_device_reset_handler(struct scsi_cmnd *scsicmd)
if (rc == 0 && wait_for_device_to_become_ready(h, dev->scsi3addr) == 0)
return SUCCESS;
- dev_warn(&h->pdev->dev, "resetting device failed.\n");
return FAILED;
}
@@ -4499,7 +4540,7 @@ static int hpsa_send_reset_as_abort_ioaccel2(struct ctlr_info *h,
if (h->raid_offload_debug > 0)
dev_info(&h->pdev->dev,
- "Reset as abort: Abort requested on C%d:B%d:T%d:L%d scsi3addr 0x%02x%02x%02x%02x%02x%02x%02x%02x\n",
+ "Reset as abort: scsi %d:%d:%d:%d scsi3addr 0x%02x%02x%02x%02x%02x%02x%02x%02x\n",
h->scsi_host->host_no, dev->bus, dev->target, dev->lun,
scsi3addr[0], scsi3addr[1], scsi3addr[2], scsi3addr[3],
scsi3addr[4], scsi3addr[5], scsi3addr[6], scsi3addr[7]);
@@ -4602,7 +4643,7 @@ static int hpsa_eh_abort_handler(struct scsi_cmnd *sc)
return FAILED;
memset(msg, 0, sizeof(msg));
- ml += sprintf(msg+ml, "ABORT REQUEST on C%d:B%d:T%d:L%llu ",
+ ml += sprintf(msg+ml, "Aborting command on scsi %d:%d:%d:%llu ",
h->scsi_host->host_no, sc->device->channel,
sc->device->id, sc->device->lun);
@@ -4632,7 +4673,7 @@ static int hpsa_eh_abort_handler(struct scsi_cmnd *sc)
ml += sprintf(msg+ml, "Command:0x%x SN:0x%lx ",
as->cmnd[0], as->serial_number);
dev_dbg(&h->pdev->dev, "%s\n", msg);
- dev_warn(&h->pdev->dev, "Abort request on C%d:B%d:T%d:L%d\n",
+ dev_warn(&h->pdev->dev, "Aborting command on scsi %d:%d:%d:%d\n",
h->scsi_host->host_no, dev->bus, dev->target, dev->lun);
/*
* Command is in flight, or possibly already completed
@@ -4641,8 +4682,7 @@ static int hpsa_eh_abort_handler(struct scsi_cmnd *sc)
*/
rc = hpsa_send_abort_both_ways(h, dev->scsi3addr, abort);
if (rc != 0) {
- dev_dbg(&h->pdev->dev, "%s Request FAILED.\n", msg);
- dev_warn(&h->pdev->dev, "FAILED abort on device C%d:B%d:T%d:L%d\n",
+ dev_warn(&h->pdev->dev, "FAILED abort command on scsi %d:%d:%d:%d\n",
h->scsi_host->host_no,
dev->bus, dev->target, dev->lun);
cmd_free(h, abort);
^ permalink raw reply related [flat|nested] 58+ messages in thread* Re: [PATCH 02/43] hpsa: clean up host, channel, target, lun prints
2015-02-21 22:17 ` [PATCH 02/43] hpsa: clean up host, channel, target, lun prints Don Brace
@ 2015-02-23 20:16 ` Christoph Hellwig
2015-02-26 14:50 ` brace
0 siblings, 1 reply; 58+ messages in thread
From: Christoph Hellwig @ 2015-02-23 20:16 UTC (permalink / raw)
To: Don Brace
Cc: scott.teel, Kevin.Barnett, james.bottomley, hch, Justin.Lindley,
brace, linux-scsi
> + dev_info(&h->pdev->dev,
> + "%6s scsi %d:%d:%d:%d: %s %.8s %.16s RAID-%s SSDSmartPathCap%c En%c Exp=%d\n",
So you still have an action before the identifier. Can't you just add
a hpsa_dev_printk macro similar to sdev_printk that encapsulates the
format, and also makes sure it's always the prefix for the log message?
^ permalink raw reply [flat|nested] 58+ messages in thread
* RE: [PATCH 02/43] hpsa: clean up host, channel, target, lun prints
2015-02-23 20:16 ` Christoph Hellwig
@ 2015-02-26 14:50 ` brace
0 siblings, 0 replies; 58+ messages in thread
From: brace @ 2015-02-26 14:50 UTC (permalink / raw)
To: Christoph Hellwig
Cc: Scott Teel, Kevin Barnett, james.bottomley@parallels.com,
Justin Lindley, brace, linux-scsi@vger.kernel.org
done
> -----Original Message-----
> From: Christoph Hellwig [mailto:hch@infradead.org]
> Sent: Monday, February 23, 2015 2:16 PM
> To: Don Brace
> Cc: Scott Teel; Kevin Barnett; james.bottomley@parallels.com;
> hch@infradead.org; Justin Lindley; brace; linux-scsi@vger.kernel.org
> Subject: Re: [PATCH 02/43] hpsa: clean up host, channel, target, lun prints
>
> > + dev_info(&h->pdev->dev,
> > + "%6s scsi %d:%d:%d:%d: %s %.8s %.16s RAID-%s
> SSDSmartPathCap%c En%c Exp=%d\n",
>
> So you still have an action before the identifier. Can't you just add
> a hpsa_dev_printk macro similar to sdev_printk that encapsulates the
> format, and also makes sure it's always the prefix for the log message?
^ permalink raw reply [flat|nested] 58+ messages in thread
* [PATCH 03/43] hpsa: rework controller command submission
2015-02-21 22:17 [PATCH 00/43] hpsa updates Don Brace
2015-02-21 22:17 ` [PATCH 01/43] hpsa: add masked physical devices into h->dev[] array Don Brace
2015-02-21 22:17 ` [PATCH 02/43] hpsa: clean up host, channel, target, lun prints Don Brace
@ 2015-02-21 22:17 ` Don Brace
2015-02-21 22:17 ` [PATCH 04/43] hpsa: clean up aborts Don Brace
` (39 subsequent siblings)
42 siblings, 0 replies; 58+ messages in thread
From: Don Brace @ 2015-02-21 22:17 UTC (permalink / raw)
To: scott.teel, Kevin.Barnett, james.bottomley, hch, Justin.Lindley,
brace
Cc: linux-scsi
From: Webb Scales <webb.scales@hp.com>
Allow driver initiated commands to have a timeout. It does not
yet try to do anything with timeouts on such commands.
We are sending a reset in order to get rid of a command we want to abort.
If we make it return on the same reply queue as the command we want to abort,
the completion of the aborted command will not race with the completion of
the reset command.
Rename hpsa_scsi_do_simple_cmd_core() to hpsa_scsi_do_simple_cmd(), since
this function is the interface for issuing commands to the controller and
not the "core" of that implementation. Add a parameter to it which allows
the caller to specify the reply queue to be used. Modify existing callers
to specify the default reply queue.
Rename __hpsa_scsi_do_simple_cmd_core() to hpsa_scsi_do_simple_cmd_core(),
since this routine is the "core" implementation of the "do simple command"
function and there is no longer any other function with a similar name.
Modify the existing callers of this routine (other than
hpsa_scsi_do_simple_cmd()) to instead call hpsa_scsi_do_simple_cmd(), since
it will now accept the reply_queue paramenter, and it provides a controller
lock-up check. (Also, tweak two related message strings to make them
distinct from each other.)
Submitting a command to a locked up controller always results in a timeout,
so check for controller lock-up before submitting.
This is to enable fixing a race between command completions and
abort completions on different reply queues in a subsequent patch.
We want to be able to specify which reply queue an abort completion
should occur on so that it cannot race the completion of the command
it is trying to abort.
The following race was possible in theory:
1. Abort command is sent to hardware.
2. Command to be aborted simultaneously completes on another
reply queue.
3. Hardware receives abort command, decides command has already
completed and indicates this to the driver via another different
reply queue.
4. driver processes abort completion finds that the hardware does not know
about the command, concludes that therefore the command cannot complete,
returns SUCCESS indicating to the mid-layer that the scsi_cmnd may be
re-used.
5. Command from step 2 is processed and completed back to scsi mid
layer (after we already promised that would never happen.)
Fix by forcing aborts to complete on the same reply queue as the command
they are aborting.
Piggybacking device rescanning functionality onto the lockup
detection thread is not a good idea because if the controller
locks up during device rescanning, then the thread could get
stuck, then the lockup isn't detected. Use separate work
queues for device rescanning and lockup detection.
Detect controller lockup in abort handler.
After a lockup is detected, return DO_NO_CONNECT which results in immediate
termination of commands rather than DID_ERR which results in retries.
Modify detect_controller_lockup() to return the result, to remove the need for a separate check.
Reviewed-by: Scott Teel <scott.teel@pmcs.com>
Reviewed-by: Kevin Barnett <kevin.barnett@pmcs.com>
Signed-off-by: Webb Scales <webbnh@hp.com>
Signed-off-by: Don Brace <don.brace@pmcs.com>
---
drivers/scsi/hpsa.c | 326 ++++++++++++++++++++++++++++++++++++-----------
drivers/scsi/hpsa_cmd.h | 5 +
2 files changed, 254 insertions(+), 77 deletions(-)
diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index 9a82ede..92358ac 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -253,6 +253,8 @@ static int hpsa_scsi_ioaccel_queue_command(struct ctlr_info *h,
struct CommandList *c, u32 ioaccel_handle, u8 *cdb, int cdb_len,
u8 *scsi3addr, struct hpsa_scsi_dev_t *phys_disk);
static void hpsa_command_resubmit_worker(struct work_struct *work);
+static u32 lockup_detected(struct ctlr_info *h);
+static int detect_controller_lockup(struct ctlr_info *h);
static inline struct ctlr_info *sdev_to_hba(struct scsi_device *sdev)
{
@@ -748,30 +750,43 @@ static inline u32 next_command(struct ctlr_info *h, u8 q)
* a separate special register for submitting commands.
*/
-/* set_performant_mode: Modify the tag for cciss performant
+/*
+ * set_performant_mode: Modify the tag for cciss performant
* set bit 0 for pull model, bits 3-1 for block fetch
* register number
*/
-static void set_performant_mode(struct ctlr_info *h, struct CommandList *c)
+#define DEFAULT_REPLY_QUEUE (-1)
+static void set_performant_mode(struct ctlr_info *h, struct CommandList *c,
+ int reply_queue)
{
if (likely(h->transMethod & CFGTBL_Trans_Performant)) {
c->busaddr |= 1 | (h->blockFetchTable[c->Header.SGList] << 1);
- if (likely(h->msix_vector > 0))
+ if (unlikely(!h->msix_vector))
+ return;
+ if (likely(reply_queue == DEFAULT_REPLY_QUEUE))
c->Header.ReplyQueue =
raw_smp_processor_id() % h->nreply_queues;
+ else
+ c->Header.ReplyQueue = reply_queue % h->nreply_queues;
}
}
static void set_ioaccel1_performant_mode(struct ctlr_info *h,
- struct CommandList *c)
+ struct CommandList *c,
+ int reply_queue)
{
struct io_accel1_cmd *cp = &h->ioaccel_cmd_pool[c->cmdindex];
- /* Tell the controller to post the reply to the queue for this
+ /*
+ * Tell the controller to post the reply to the queue for this
* processor. This seems to give the best I/O throughput.
*/
- cp->ReplyQueue = smp_processor_id() % h->nreply_queues;
- /* Set the bits in the address sent down to include:
+ if (likely(reply_queue == DEFAULT_REPLY_QUEUE))
+ cp->ReplyQueue = smp_processor_id() % h->nreply_queues;
+ else
+ cp->ReplyQueue = reply_queue % h->nreply_queues;
+ /*
+ * Set the bits in the address sent down to include:
* - performant mode bit (bit 0)
* - pull count (bits 1-3)
* - command type (bits 4-6)
@@ -781,15 +796,21 @@ static void set_ioaccel1_performant_mode(struct ctlr_info *h,
}
static void set_ioaccel2_performant_mode(struct ctlr_info *h,
- struct CommandList *c)
+ struct CommandList *c,
+ int reply_queue)
{
struct io_accel2_cmd *cp = &h->ioaccel2_cmd_pool[c->cmdindex];
- /* Tell the controller to post the reply to the queue for this
+ /*
+ * Tell the controller to post the reply to the queue for this
* processor. This seems to give the best I/O throughput.
*/
- cp->reply_queue = smp_processor_id() % h->nreply_queues;
- /* Set the bits in the address sent down to include:
+ if (likely(reply_queue == DEFAULT_REPLY_QUEUE))
+ cp->reply_queue = smp_processor_id() % h->nreply_queues;
+ else
+ cp->reply_queue = reply_queue % h->nreply_queues;
+ /*
+ * Set the bits in the address sent down to include:
* - performant mode bit not used in ioaccel mode 2
* - pull count (bits 0-3)
* - command type isn't needed for ioaccel2
@@ -826,26 +847,32 @@ static void dial_up_lockup_detection_on_fw_flash_complete(struct ctlr_info *h,
h->heartbeat_sample_interval = HEARTBEAT_SAMPLE_INTERVAL;
}
-static void enqueue_cmd_and_start_io(struct ctlr_info *h,
- struct CommandList *c)
+static void __enqueue_cmd_and_start_io(struct ctlr_info *h,
+ struct CommandList *c, int reply_queue)
{
dial_down_lockup_detection_during_fw_flash(h, c);
atomic_inc(&h->commands_outstanding);
switch (c->cmd_type) {
case CMD_IOACCEL1:
- set_ioaccel1_performant_mode(h, c);
+ set_ioaccel1_performant_mode(h, c, reply_queue);
writel(c->busaddr, h->vaddr + SA5_REQUEST_PORT_OFFSET);
break;
case CMD_IOACCEL2:
- set_ioaccel2_performant_mode(h, c);
+ set_ioaccel2_performant_mode(h, c, reply_queue);
writel(c->busaddr, h->vaddr + IOACCEL2_INBOUND_POSTQ_32);
break;
default:
- set_performant_mode(h, c);
+ set_performant_mode(h, c, reply_queue);
h->access.submit_command(h, c);
}
}
+static void enqueue_cmd_and_start_io(struct ctlr_info *h,
+ struct CommandList *c)
+{
+ __enqueue_cmd_and_start_io(h, c, DEFAULT_REPLY_QUEUE);
+}
+
static inline int is_hba_lunid(unsigned char scsi3addr[])
{
return memcmp(scsi3addr, RAID_CTLR_LUNID, 8) == 0;
@@ -1890,6 +1917,19 @@ static void complete_scsi_command(struct CommandList *cp)
if (cp->cmd_type == CMD_IOACCEL2 || cp->cmd_type == CMD_IOACCEL1)
atomic_dec(&cp->phys_disk->ioaccel_cmds_out);
+ /*
+ * We check for lockup status here as it may be set for
+ * CMD_SCSI, CMD_IOACCEL1 and CMD_IOACCEL2 commands by
+ * fail_all_oustanding_cmds()
+ */
+ if (unlikely(ei->CommandStatus == CMD_CTLR_LOCKUP)) {
+ /* DID_NO_CONNECT will prevent a retry */
+ cmd->result = DID_NO_CONNECT << 16;
+ cmd_free(h, cp);
+ cmd->scsi_done(cmd);
+ return;
+ }
+
if (cp->cmd_type == CMD_IOACCEL2)
return process_ioaccel2_completion(h, cp, cmd, dev);
@@ -2104,14 +2144,36 @@ static int hpsa_map_one(struct pci_dev *pdev,
return 0;
}
-static inline void hpsa_scsi_do_simple_cmd_core(struct ctlr_info *h,
- struct CommandList *c)
+#define NO_TIMEOUT ((unsigned long) -1)
+#define DEFAULT_TIMEOUT 30000 /* milliseconds */
+static int hpsa_scsi_do_simple_cmd_core(struct ctlr_info *h,
+ struct CommandList *c, int reply_queue, unsigned long timeout_msecs)
{
DECLARE_COMPLETION_ONSTACK(wait);
c->waiting = &wait;
- enqueue_cmd_and_start_io(h, c);
- wait_for_completion(&wait);
+ __enqueue_cmd_and_start_io(h, c, reply_queue);
+ if (timeout_msecs == NO_TIMEOUT) {
+ /* TODO: get rid of this no-timeout thing */
+ wait_for_completion_io(&wait);
+ return IO_OK;
+ }
+ if (!wait_for_completion_io_timeout(&wait,
+ msecs_to_jiffies(timeout_msecs))) {
+ dev_warn(&h->pdev->dev, "Command timed out.\n");
+ return -ETIMEDOUT;
+ }
+ return IO_OK;
+}
+
+static int hpsa_scsi_do_simple_cmd(struct ctlr_info *h, struct CommandList *c,
+ int reply_queue, unsigned long timeout_msecs)
+{
+ if (unlikely(lockup_detected(h))) {
+ c->err_info->CommandStatus = CMD_CTLR_LOCKUP;
+ return IO_OK;
+ }
+ return hpsa_scsi_do_simple_cmd_core(h, c, reply_queue, timeout_msecs);
}
static u32 lockup_detected(struct ctlr_info *h)
@@ -2126,25 +2188,19 @@ static u32 lockup_detected(struct ctlr_info *h)
return rc;
}
-static void hpsa_scsi_do_simple_cmd_core_if_no_lockup(struct ctlr_info *h,
- struct CommandList *c)
-{
- /* If controller lockup detected, fake a hardware error. */
- if (unlikely(lockup_detected(h)))
- c->err_info->CommandStatus = CMD_HARDWARE_ERR;
- else
- hpsa_scsi_do_simple_cmd_core(h, c);
-}
-
#define MAX_DRIVER_CMD_RETRIES 25
-static void hpsa_scsi_do_simple_cmd_with_retry(struct ctlr_info *h,
- struct CommandList *c, int data_direction)
+static int hpsa_scsi_do_simple_cmd_with_retry(struct ctlr_info *h,
+ struct CommandList *c, int data_direction, unsigned long timeout_msecs)
{
int backoff_time = 10, retry_count = 0;
+ int rc;
do {
memset(c->err_info, 0, sizeof(*c->err_info));
- hpsa_scsi_do_simple_cmd_core(h, c);
+ rc = hpsa_scsi_do_simple_cmd(h, c, DEFAULT_REPLY_QUEUE,
+ timeout_msecs);
+ if (rc)
+ break;
retry_count++;
if (retry_count > 3) {
msleep(backoff_time);
@@ -2155,6 +2211,9 @@ static void hpsa_scsi_do_simple_cmd_with_retry(struct ctlr_info *h,
check_for_busy(h, c)) &&
retry_count <= MAX_DRIVER_CMD_RETRIES);
hpsa_pci_unmap(h->pdev, c, 1, data_direction);
+ if (retry_count > MAX_DRIVER_CMD_RETRIES)
+ rc = -EIO;
+ return rc;
}
static void hpsa_print_cmd(struct ctlr_info *h, char *txt,
@@ -2231,6 +2290,9 @@ static void hpsa_scsi_interpret_error(struct ctlr_info *h,
case CMD_UNABORTABLE:
hpsa_print_cmd(h, "unabortable", cp);
break;
+ case CMD_CTLR_LOCKUP:
+ hpsa_print_cmd(h, "controller lockup detected", cp);
+ break;
default:
hpsa_print_cmd(h, "unknown status", cp);
dev_warn(d, "Unknown command status %x\n",
@@ -2258,7 +2320,10 @@ static int hpsa_scsi_do_inquiry(struct ctlr_info *h, unsigned char *scsi3addr,
rc = -1;
goto out;
}
- hpsa_scsi_do_simple_cmd_with_retry(h, c, PCI_DMA_FROMDEVICE);
+ rc = hpsa_scsi_do_simple_cmd_with_retry(h, c,
+ PCI_DMA_FROMDEVICE, NO_TIMEOUT);
+ if (rc)
+ goto out;
ei = c->err_info;
if (ei->CommandStatus != 0 && ei->CommandStatus != CMD_DATA_UNDERRUN) {
hpsa_scsi_interpret_error(h, c);
@@ -2288,7 +2353,10 @@ static int hpsa_bmic_ctrl_mode_sense(struct ctlr_info *h,
rc = -1;
goto out;
}
- hpsa_scsi_do_simple_cmd_with_retry(h, c, PCI_DMA_FROMDEVICE);
+ rc = hpsa_scsi_do_simple_cmd_with_retry(h, c,
+ PCI_DMA_FROMDEVICE, NO_TIMEOUT);
+ if (rc)
+ goto out;
ei = c->err_info;
if (ei->CommandStatus != 0 && ei->CommandStatus != CMD_DATA_UNDERRUN) {
hpsa_scsi_interpret_error(h, c);
@@ -2300,7 +2368,7 @@ out:
}
static int hpsa_send_reset(struct ctlr_info *h, unsigned char *scsi3addr,
- u8 reset_type)
+ u8 reset_type, int reply_queue)
{
int rc = IO_OK;
struct CommandList *c;
@@ -2317,7 +2385,11 @@ static int hpsa_send_reset(struct ctlr_info *h, unsigned char *scsi3addr,
(void) fill_cmd(c, HPSA_DEVICE_RESET_MSG, h, NULL, 0, 0,
scsi3addr, TYPE_MSG);
c->Request.CDB[1] = reset_type; /* fill_cmd defaults to LUN reset */
- hpsa_scsi_do_simple_cmd_core(h, c);
+ rc = hpsa_scsi_do_simple_cmd(h, c, reply_queue, NO_TIMEOUT);
+ if (rc) {
+ dev_warn(&h->pdev->dev, "Failed to send reset command\n");
+ goto out;
+ }
/* no unmap needed here because no data xfer. */
ei = c->err_info;
@@ -2325,6 +2397,7 @@ static int hpsa_send_reset(struct ctlr_info *h, unsigned char *scsi3addr,
hpsa_scsi_interpret_error(h, c);
rc = -1;
}
+out:
cmd_free(h, c);
return rc;
}
@@ -2442,15 +2515,18 @@ static int hpsa_get_raid_map(struct ctlr_info *h,
sizeof(this_device->raid_map), 0,
scsi3addr, TYPE_CMD)) {
dev_warn(&h->pdev->dev, "Out of memory in hpsa_get_raid_map()\n");
- cmd_free(h, c);
- return -ENOMEM;
+ rc = -ENOMEM;
+ goto out;
}
- hpsa_scsi_do_simple_cmd_with_retry(h, c, PCI_DMA_FROMDEVICE);
+ rc = hpsa_scsi_do_simple_cmd_with_retry(h, c,
+ PCI_DMA_FROMDEVICE, NO_TIMEOUT);
+ if (rc)
+ goto out;
ei = c->err_info;
if (ei->CommandStatus != 0 && ei->CommandStatus != CMD_DATA_UNDERRUN) {
hpsa_scsi_interpret_error(h, c);
- cmd_free(h, c);
- return -1;
+ rc = -1;
+ goto out;
}
cmd_free(h, c);
@@ -2462,6 +2538,9 @@ static int hpsa_get_raid_map(struct ctlr_info *h,
}
hpsa_debug_map_buff(h, rc, &this_device->raid_map);
return rc;
+out:
+ cmd_free(h, c);
+ return rc;
}
static int hpsa_bmic_id_physical_device(struct ctlr_info *h,
@@ -2481,7 +2560,8 @@ static int hpsa_bmic_id_physical_device(struct ctlr_info *h,
c->Request.CDB[2] = bmic_device_index & 0xff;
c->Request.CDB[9] = (bmic_device_index >> 8) & 0xff;
- hpsa_scsi_do_simple_cmd_with_retry(h, c, PCI_DMA_FROMDEVICE);
+ hpsa_scsi_do_simple_cmd_with_retry(h, c, PCI_DMA_FROMDEVICE,
+ NO_TIMEOUT);
ei = c->err_info;
if (ei->CommandStatus != 0 && ei->CommandStatus != CMD_DATA_UNDERRUN) {
hpsa_scsi_interpret_error(h, c);
@@ -2616,7 +2696,10 @@ static int hpsa_scsi_do_report_luns(struct ctlr_info *h, int logical,
}
if (extended_response)
c->Request.CDB[1] = extended_response;
- hpsa_scsi_do_simple_cmd_with_retry(h, c, PCI_DMA_FROMDEVICE);
+ rc = hpsa_scsi_do_simple_cmd_with_retry(h, c,
+ PCI_DMA_FROMDEVICE, NO_TIMEOUT);
+ if (rc)
+ goto out;
ei = c->err_info;
if (ei->CommandStatus != 0 &&
ei->CommandStatus != CMD_DATA_UNDERRUN) {
@@ -2709,7 +2792,7 @@ static int hpsa_volume_offline(struct ctlr_info *h,
{
struct CommandList *c;
unsigned char *sense, sense_key, asc, ascq;
- int ldstat = 0;
+ int rc, ldstat = 0;
u16 cmd_status;
u8 scsi_status;
#define ASC_LUN_NOT_READY 0x04
@@ -2720,7 +2803,11 @@ static int hpsa_volume_offline(struct ctlr_info *h,
if (!c)
return 0;
(void) fill_cmd(c, TEST_UNIT_READY, h, NULL, 0, 0, scsi3addr, TYPE_CMD);
- hpsa_scsi_do_simple_cmd_core(h, c);
+ rc = hpsa_scsi_do_simple_cmd(h, c, DEFAULT_REPLY_QUEUE, NO_TIMEOUT);
+ if (rc) {
+ cmd_free(h, c);
+ return 0;
+ }
sense = c->err_info->SenseInfo;
sense_key = sense[2];
asc = sense[12];
@@ -4053,7 +4140,11 @@ static int hpsa_scsi_ioaccel_raid_map(struct ctlr_info *h,
dev->phys_disk[map_index]);
}
-/* Submit commands down the "normal" RAID stack path */
+/*
+ * Submit commands down the "normal" RAID stack path
+ * All callers to hpsa_ciss_submit must check lockup_detected
+ * beforehand, before (opt.) and after calling cmd_alloc
+ */
static int hpsa_ciss_submit(struct ctlr_info *h,
struct CommandList *c, struct scsi_cmnd *cmd,
unsigned char scsi3addr[])
@@ -4164,7 +4255,7 @@ static int hpsa_scsi_queue_command(struct Scsi_Host *sh, struct scsi_cmnd *cmd)
memcpy(scsi3addr, dev->scsi3addr, sizeof(scsi3addr));
if (unlikely(lockup_detected(h))) {
- cmd->result = DID_ERROR << 16;
+ cmd->result = DID_NO_CONNECT << 16;
cmd->scsi_done(cmd);
return 0;
}
@@ -4174,7 +4265,7 @@ static int hpsa_scsi_queue_command(struct Scsi_Host *sh, struct scsi_cmnd *cmd)
return SCSI_MLQUEUE_HOST_BUSY;
}
if (unlikely(lockup_detected(h))) {
- cmd->result = DID_ERROR << 16;
+ cmd->result = DID_NO_CONNECT << 16;
cmd_free(h, c);
cmd->scsi_done(cmd);
return 0;
@@ -4369,7 +4460,10 @@ static int wait_for_device_to_become_ready(struct ctlr_info *h,
/* Send the Test Unit Ready, fill_cmd can't fail, no mapping */
(void) fill_cmd(c, TEST_UNIT_READY, h,
NULL, 0, 0, lunaddr, TYPE_CMD);
- hpsa_scsi_do_simple_cmd_core(h, c);
+ rc = hpsa_scsi_do_simple_cmd(h, c, DEFAULT_REPLY_QUEUE,
+ NO_TIMEOUT);
+ if (rc)
+ goto do_it_again;
/* no unmap needed here because no data xfer. */
if (c->err_info->CommandStatus == CMD_SUCCESS)
@@ -4380,7 +4474,7 @@ static int wait_for_device_to_become_ready(struct ctlr_info *h,
(c->err_info->SenseInfo[2] == NO_SENSE ||
c->err_info->SenseInfo[2] == UNIT_ATTENTION))
break;
-
+do_it_again:
dev_warn(&h->pdev->dev, "waiting %d secs "
"for device to become ready.\n", waittime);
rc = 1; /* device not ready. */
@@ -4418,13 +4512,46 @@ static int hpsa_eh_device_reset_handler(struct scsi_cmnd *scsicmd)
"device lookup failed.\n");
return FAILED;
}
- dev_warn(&h->pdev->dev, "resetting device %d:%d:%d:%d\n",
- h->scsi_host->host_no, dev->bus, dev->target, dev->lun);
+
+ /* if controller locked up, we can guarantee command won't complete */
+ if (lockup_detected(h)) {
+ dev_warn(&h->pdev->dev,
+ "scsi %d:%d:%d:%d RESET FAILED, lockup detected\n",
+ h->scsi_host->host_no, dev->bus, dev->target,
+ dev->lun);
+ return FAILED;
+ }
+
+ /* this reset request might be the result of a lockup; check */
+ if (detect_controller_lockup(h)) {
+ dev_warn(&h->pdev->dev,
+ "scsi %d:%d:%d:%d RESET FAILED, new lockup detected\n",
+ h->scsi_host->host_no, dev->bus, dev->target,
+ dev->lun);
+ return FAILED;
+ }
+
+ dev_warn(&h->pdev->dev,
+ "resetting scsi %d:%d:%d:%d: %s %.8s %.16s RAID-%s SSDSmartPathCap%c En%c Exp=%d\n",
+ h->scsi_host->host_no, dev->bus, dev->target, dev->lun,
+ scsi_device_type(dev->devtype),
+ dev->vendor,
+ dev->model,
+ dev->raid_level > RAID_UNKNOWN ?
+ "RAID-?" : raid_label[dev->raid_level],
+ dev->offload_config ? '+' : '-',
+ dev->offload_enabled ? '+' : '-',
+ dev->expose_state);
+
/* send a reset to the SCSI LUN which the command was sent to */
- rc = hpsa_send_reset(h, dev->scsi3addr, HPSA_RESET_TYPE_LUN);
+ rc = hpsa_send_reset(h, dev->scsi3addr, HPSA_RESET_TYPE_LUN,
+ DEFAULT_REPLY_QUEUE);
if (rc == 0 && wait_for_device_to_become_ready(h, dev->scsi3addr) == 0)
return SUCCESS;
+ dev_warn(&h->pdev->dev,
+ "resetting scsi %d:%d:%d:%d failed\n",
+ h->scsi_host->host_no, dev->bus, dev->target, dev->lun);
return FAILED;
}
@@ -4469,7 +4596,7 @@ static void hpsa_get_tag(struct ctlr_info *h,
}
static int hpsa_send_abort(struct ctlr_info *h, unsigned char *scsi3addr,
- struct CommandList *abort, int swizzle)
+ struct CommandList *abort, int swizzle, int reply_queue)
{
int rc = IO_OK;
struct CommandList *c;
@@ -4487,9 +4614,9 @@ static int hpsa_send_abort(struct ctlr_info *h, unsigned char *scsi3addr,
0, 0, scsi3addr, TYPE_MSG);
if (swizzle)
swizzle_abort_tag(&c->Request.CDB[4]);
- hpsa_scsi_do_simple_cmd_core(h, c);
+ (void) hpsa_scsi_do_simple_cmd(h, c, reply_queue, NO_TIMEOUT);
hpsa_get_tag(h, abort, &taglower, &tagupper);
- dev_dbg(&h->pdev->dev, "%s: Tag:0x%08x:%08x: do_simple_cmd_core completed.\n",
+ dev_dbg(&h->pdev->dev, "%s: Tag:0x%08x:%08x: do_simple_cmd(abort) completed.\n",
__func__, tagupper, taglower);
/* no unmap needed here because no data xfer. */
@@ -4521,7 +4648,7 @@ static int hpsa_send_abort(struct ctlr_info *h, unsigned char *scsi3addr,
*/
static int hpsa_send_reset_as_abort_ioaccel2(struct ctlr_info *h,
- unsigned char *scsi3addr, struct CommandList *abort)
+ unsigned char *scsi3addr, struct CommandList *abort, int reply_queue)
{
int rc = IO_OK;
struct scsi_cmnd *scmd; /* scsi command within request being aborted */
@@ -4563,7 +4690,7 @@ static int hpsa_send_reset_as_abort_ioaccel2(struct ctlr_info *h,
"Reset as abort: Resetting physical device at scsi3addr 0x%02x%02x%02x%02x%02x%02x%02x%02x\n",
psa[0], psa[1], psa[2], psa[3],
psa[4], psa[5], psa[6], psa[7]);
- rc = hpsa_send_reset(h, psa, HPSA_RESET_TYPE_TARGET);
+ rc = hpsa_send_reset(h, psa, HPSA_RESET_TYPE_TARGET, reply_queue);
if (rc != 0) {
dev_warn(&h->pdev->dev,
"Reset as abort: Failed on physical device at scsi3addr 0x%02x%02x%02x%02x%02x%02x%02x%02x\n",
@@ -4597,7 +4724,7 @@ static int hpsa_send_reset_as_abort_ioaccel2(struct ctlr_info *h,
* make this true someday become false.
*/
static int hpsa_send_abort_both_ways(struct ctlr_info *h,
- unsigned char *scsi3addr, struct CommandList *abort)
+ unsigned char *scsi3addr, struct CommandList *abort, int reply_queue)
{
/* ioccelerator mode 2 commands should be aborted via the
* accelerated path, since RAID path is unaware of these commands,
@@ -4605,10 +4732,20 @@ static int hpsa_send_abort_both_ways(struct ctlr_info *h,
* Change abort to physical device reset.
*/
if (abort->cmd_type == CMD_IOACCEL2)
- return hpsa_send_reset_as_abort_ioaccel2(h, scsi3addr, abort);
+ return hpsa_send_reset_as_abort_ioaccel2(h, scsi3addr,
+ abort, reply_queue);
+
+ return hpsa_send_abort(h, scsi3addr, abort, 0, reply_queue) &&
+ hpsa_send_abort(h, scsi3addr, abort, 1, reply_queue);
+}
- return hpsa_send_abort(h, scsi3addr, abort, 0) &&
- hpsa_send_abort(h, scsi3addr, abort, 1);
+/* Find out which reply queue a command was meant to return on */
+static int hpsa_extract_reply_queue(struct ctlr_info *h,
+ struct CommandList *c)
+{
+ if (c->cmd_type == CMD_IOACCEL2)
+ return h->ioaccel2_cmd_pool[c->cmdindex].reply_queue;
+ return c->Header.ReplyQueue;
}
/* Send an abort for the specified command.
@@ -4626,7 +4763,7 @@ static int hpsa_eh_abort_handler(struct scsi_cmnd *sc)
char msg[256]; /* For debug messaging. */
int ml = 0;
__le32 tagupper, taglower;
- int refcount;
+ int refcount, reply_queue;
/* Find the controller of the command to be aborted */
h = sdev_to_hba(sc->device);
@@ -4634,8 +4771,23 @@ static int hpsa_eh_abort_handler(struct scsi_cmnd *sc)
"ABORT REQUEST FAILED, Controller lookup failed.\n"))
return FAILED;
- if (lockup_detected(h))
+ /* If controller locked up, we can guarantee command won't complete */
+ if (lockup_detected(h)) {
+ dev_warn(&h->pdev->dev,
+ "scsi %d:%d:%d:%llu scmd %p ABORT FAILED, lockup detected\n",
+ h->scsi_host->host_no, sc->device->channel,
+ sc->device->id, sc->device->lun, sc);
return FAILED;
+ }
+
+ /* This is a good time to check if controller lockup has occurred */
+ if (detect_controller_lockup(h)) {
+ dev_warn(&h->pdev->dev,
+ "scsi %d:%d:%d:%llu scmd %p ABORT FAILED, new lockup detected\n",
+ h->scsi_host->host_no, sc->device->channel,
+ sc->device->id, sc->device->lun, sc);
+ return FAILED;
+ }
/* Check that controller supports some kind of task abort */
if (!(HPSATMF_PHYS_TASK_ABORT & h->TMFSupportFlags) &&
@@ -4667,6 +4819,7 @@ static int hpsa_eh_abort_handler(struct scsi_cmnd *sc)
return SUCCESS;
}
hpsa_get_tag(h, abort, &taglower, &tagupper);
+ reply_queue = hpsa_extract_reply_queue(h, abort);
ml += sprintf(msg+ml, "Tag:0x%08x:%08x ", tagupper, taglower);
as = abort->scsi_cmd;
if (as != NULL)
@@ -4680,7 +4833,7 @@ static int hpsa_eh_abort_handler(struct scsi_cmnd *sc)
* by the firmware (but not to the scsi mid layer) but we can't
* distinguish which. Send the abort down.
*/
- rc = hpsa_send_abort_both_ways(h, dev->scsi3addr, abort);
+ rc = hpsa_send_abort_both_ways(h, dev->scsi3addr, abort, reply_queue);
if (rc != 0) {
dev_warn(&h->pdev->dev, "FAILED abort command on scsi %d:%d:%d:%d\n",
h->scsi_host->host_no,
@@ -5004,7 +5157,9 @@ static int hpsa_passthru_ioctl(struct ctlr_info *h, void __user *argp)
c->SG[0].Len = cpu_to_le32(iocommand.buf_size);
c->SG[0].Ext = cpu_to_le32(HPSA_SG_LAST); /* not chaining */
}
- hpsa_scsi_do_simple_cmd_core_if_no_lockup(h, c);
+ rc = hpsa_scsi_do_simple_cmd(h, c, DEFAULT_REPLY_QUEUE, NO_TIMEOUT);
+ if (rc)
+ rc = -EIO;
if (iocommand.buf_size > 0)
hpsa_pci_unmap(h->pdev, c, 1, PCI_DMA_BIDIRECTIONAL);
check_ioctl_unit_attention(h, c);
@@ -5134,7 +5289,11 @@ static int hpsa_big_passthru_ioctl(struct ctlr_info *h, void __user *argp)
}
c->SG[--i].Ext = cpu_to_le32(HPSA_SG_LAST);
}
- hpsa_scsi_do_simple_cmd_core_if_no_lockup(h, c);
+ status = hpsa_scsi_do_simple_cmd(h, c, DEFAULT_REPLY_QUEUE, NO_TIMEOUT);
+ if (status) {
+ status = -EIO;
+ goto cleanup0;
+ }
if (sg_used)
hpsa_pci_unmap(h->pdev, c, sg_used, PCI_DMA_BIDIRECTIONAL);
check_ioctl_unit_attention(h, c);
@@ -6281,6 +6440,8 @@ static int hpsa_wait_for_mode_change_ack(struct ctlr_info *h)
* as we enter this code.)
*/
for (i = 0; i < MAX_MODE_CHANGE_WAIT; i++) {
+ if (h->remove_in_progress)
+ goto done;
spin_lock_irqsave(&h->lock, flags);
doorbell_value = readl(h->vaddr + SA5_DOORBELL);
spin_unlock_irqrestore(&h->lock, flags);
@@ -6676,17 +6837,21 @@ static void fail_all_outstanding_cmds(struct ctlr_info *h)
{
int i, refcount;
struct CommandList *c;
+ int failcount = 0;
flush_workqueue(h->resubmit_wq); /* ensure all cmds are fully built */
for (i = 0; i < h->nr_cmds; i++) {
c = h->cmd_pool + i;
refcount = atomic_inc_return(&c->refcount);
if (refcount > 1) {
- c->err_info->CommandStatus = CMD_HARDWARE_ERR;
+ c->err_info->CommandStatus = CMD_CTLR_LOCKUP;
finish_cmd(c);
+ failcount++;
}
cmd_free(h, c);
}
+ dev_warn(&h->pdev->dev,
+ "failed %d commands in fail_all\n", failcount);
}
static void set_lockup_detected_for_all_cpus(struct ctlr_info *h, u32 value)
@@ -6714,18 +6879,19 @@ static void controller_lockup_detected(struct ctlr_info *h)
if (!lockup_detected) {
/* no heartbeat, but controller gave us a zero. */
dev_warn(&h->pdev->dev,
- "lockup detected but scratchpad register is zero\n");
+ "lockup detected after %d but scratchpad register is zero\n",
+ h->heartbeat_sample_interval / HZ);
lockup_detected = 0xffffffff;
}
set_lockup_detected_for_all_cpus(h, lockup_detected);
spin_unlock_irqrestore(&h->lock, flags);
- dev_warn(&h->pdev->dev, "Controller lockup detected: 0x%08x\n",
- lockup_detected);
+ dev_warn(&h->pdev->dev, "Controller lockup detected: 0x%08x after %d\n",
+ lockup_detected, h->heartbeat_sample_interval / HZ);
pci_disable_device(h->pdev);
fail_all_outstanding_cmds(h);
}
-static void detect_controller_lockup(struct ctlr_info *h)
+static int detect_controller_lockup(struct ctlr_info *h)
{
u64 now;
u32 heartbeat;
@@ -6735,7 +6901,7 @@ static void detect_controller_lockup(struct ctlr_info *h)
/* If we've received an interrupt recently, we're ok. */
if (time_after64(h->last_intr_timestamp +
(h->heartbeat_sample_interval), now))
- return;
+ return false;
/*
* If we've already checked the heartbeat recently, we're ok.
@@ -6744,7 +6910,7 @@ static void detect_controller_lockup(struct ctlr_info *h)
*/
if (time_after64(h->last_heartbeat_timestamp +
(h->heartbeat_sample_interval), now))
- return;
+ return false;
/* If heartbeat has not changed since we last looked, we're not ok. */
spin_lock_irqsave(&h->lock, flags);
@@ -6752,12 +6918,13 @@ static void detect_controller_lockup(struct ctlr_info *h)
spin_unlock_irqrestore(&h->lock, flags);
if (h->last_heartbeat == heartbeat) {
controller_lockup_detected(h);
- return;
+ return true;
}
/* We're ok. */
h->last_heartbeat = heartbeat;
h->last_heartbeat_timestamp = now;
+ return false;
}
static void hpsa_ack_ctlr_events(struct ctlr_info *h)
@@ -7101,8 +7268,10 @@ static void hpsa_flush_cache(struct ctlr_info *h)
{
char *flush_buf;
struct CommandList *c;
+ int rc;
/* Don't bother trying to flush the cache if locked up */
+ /* FIXME not necessary if do_simple_cmd does the check */
if (unlikely(lockup_detected(h)))
return;
flush_buf = kzalloc(4, GFP_KERNEL);
@@ -7118,7 +7287,10 @@ static void hpsa_flush_cache(struct ctlr_info *h)
RAID_CTLR_LUNID, TYPE_CMD)) {
goto out;
}
- hpsa_scsi_do_simple_cmd_with_retry(h, c, PCI_DMA_TODEVICE);
+ rc = hpsa_scsi_do_simple_cmd_with_retry(h, c,
+ PCI_DMA_TODEVICE, NO_TIMEOUT);
+ if (rc)
+ goto out;
if (c->err_info->CommandStatus != 0)
out:
dev_warn(&h->pdev->dev,
diff --git a/drivers/scsi/hpsa_cmd.h b/drivers/scsi/hpsa_cmd.h
index 76d5499..f52c847 100644
--- a/drivers/scsi/hpsa_cmd.h
+++ b/drivers/scsi/hpsa_cmd.h
@@ -43,6 +43,11 @@
#define CMD_TIMEOUT 0x000B
#define CMD_UNABORTABLE 0x000C
#define CMD_IOACCEL_DISABLED 0x000E
+#define CMD_CTLR_LOCKUP 0xffff
+/* Note: CMD_CTLR_LOCKUP is not a value defined by the CISS spec
+ * it is a value defined by the driver that commands can be marked
+ * with when a controller lockup has been detected by the driver
+ */
/* Unit Attentions ASC's as defined for the MSA2012sa */
^ permalink raw reply related [flat|nested] 58+ messages in thread* [PATCH 04/43] hpsa: clean up aborts
2015-02-21 22:17 [PATCH 00/43] hpsa updates Don Brace
` (2 preceding siblings ...)
2015-02-21 22:17 ` [PATCH 03/43] hpsa: rework controller command submission Don Brace
@ 2015-02-21 22:17 ` Don Brace
2015-02-21 22:17 ` [PATCH 05/43] hpsa: decrement h->commands_outstanding in fail_all_outstanding_cmds Don Brace
` (38 subsequent siblings)
42 siblings, 0 replies; 58+ messages in thread
From: Don Brace @ 2015-02-21 22:17 UTC (permalink / raw)
To: scott.teel, Kevin.Barnett, james.bottomley, hch, Justin.Lindley,
brace
Cc: linux-scsi
From: Stephen Cameron <stephenmcameron@gmail.com>
Do not send aborts to logical devices that do not support aborts
Instead of relying on what the Smart Array claims for supporting logical
drives, simply try an abort and see how it responds at device discovery
time. This way devices that do support aborts (e.g. MSA2000) can work
and we do not waste time trying to send aborts to logical drives that do
not support them (important for high IOPS devices.)
While rescanning devices only test whether devices support aborts
the first time we encounter a device rather than every time.
Some Smart Arrays required aborts to be sent with tags in
the wrong endian byte order. To avoid having to know about
this, we would send two aborts with tags with each endian order.
On high IOPS devices, this turns out to be not such a hot idea.
So we now have a list of the devices that got the tag backwards,
and we only send it one way.
If all available commands are outstanding and the abort handler
is invoked, the abort handler may not be able to allocate a command
and may busy-wait excessivly. Reserve a small number of commands
for the abort handler and limit the number of concurrent abort
requests to the number of reserved commands.
Reviewed-by: Scott Teel <scott.teel@pmcs.com>
Reviewed-by: Kevin Barnett <kevin.barnett@pmcs.com>
Signed-off-by: Don Brace <don.brace@pmcs.com>
---
drivers/scsi/hpsa.c | 176 +++++++++++++++++++++++++++++++++++++++++----------
drivers/scsi/hpsa.h | 4 +
2 files changed, 147 insertions(+), 33 deletions(-)
diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index 92358ac..7c71d8d 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -428,7 +428,7 @@ static ssize_t host_show_hp_ssd_smart_path_status(struct device *dev,
/* List of controllers which cannot be hard reset on kexec with reset_devices */
static u32 unresettable_controller[] = {
0x324a103C, /* Smart Array P712m */
- 0x324b103C, /* SmartArray P711m */
+ 0x324b103C, /* Smart Array P711m */
0x3223103C, /* Smart Array P800 */
0x3234103C, /* Smart Array P400 */
0x3235103C, /* Smart Array P400i */
@@ -470,24 +470,32 @@ static u32 soft_unresettable_controller[] = {
0x409D0E11, /* Smart Array 6400 EM */
};
-static int ctlr_is_hard_resettable(u32 board_id)
+static u32 needs_abort_tags_swizzled[] = {
+ 0x323D103C, /* Smart Array P700m */
+ 0x324a103C, /* Smart Array P712m */
+ 0x324b103C, /* SmartArray P711m */
+};
+
+static int board_id_in_array(u32 a[], int nelems, u32 board_id)
{
int i;
- for (i = 0; i < ARRAY_SIZE(unresettable_controller); i++)
- if (unresettable_controller[i] == board_id)
- return 0;
- return 1;
+ for (i = 0; i < nelems; i++)
+ if (a[i] == board_id)
+ return 1;
+ return 0;
}
-static int ctlr_is_soft_resettable(u32 board_id)
+static int ctlr_is_hard_resettable(u32 board_id)
{
- int i;
+ return !board_id_in_array(unresettable_controller,
+ ARRAY_SIZE(unresettable_controller), board_id);
+}
- for (i = 0; i < ARRAY_SIZE(soft_unresettable_controller); i++)
- if (soft_unresettable_controller[i] == board_id)
- return 0;
- return 1;
+static int ctlr_is_soft_resettable(u32 board_id)
+{
+ return !board_id_in_array(soft_unresettable_controller,
+ ARRAY_SIZE(soft_unresettable_controller), board_id);
}
static int ctlr_is_resettable(u32 board_id)
@@ -496,6 +504,12 @@ static int ctlr_is_resettable(u32 board_id)
ctlr_is_soft_resettable(board_id);
}
+static int ctlr_needs_abort_tags_swizzled(u32 board_id)
+{
+ return board_id_in_array(needs_abort_tags_swizzled,
+ ARRAY_SIZE(needs_abort_tags_swizzled), board_id);
+}
+
static ssize_t host_show_resettable(struct device *dev,
struct device_attribute *attr, char *buf)
{
@@ -2851,6 +2865,50 @@ static int hpsa_volume_offline(struct ctlr_info *h,
return 0;
}
+/*
+ * Find out if a logical device supports aborts by simply trying one.
+ * Smart Array may claim not to support aborts on logical drives, but
+ * if a MSA2000 * is connected, the drives on that will be presented
+ * by the Smart Array as logical drives, and aborts may be sent to
+ * those devices successfully. So the simplest way to find out is
+ * to simply try an abort and see how the device responds.
+ */
+static int hpsa_device_supports_aborts(struct ctlr_info *h,
+ unsigned char *scsi3addr)
+{
+ struct CommandList *c;
+ struct ErrorInfo *ei;
+ int rc = 0;
+
+ u64 tag = (u64) -1; /* bogus tag */
+
+ /* Assume that physical devices support aborts */
+ if (!is_logical_dev_addr_mode(scsi3addr))
+ return 1;
+
+ c = cmd_alloc(h);
+ if (!c)
+ return -ENOMEM;
+ (void) fill_cmd(c, HPSA_ABORT_MSG, h, &tag, 0, 0, scsi3addr, TYPE_MSG);
+ (void) hpsa_scsi_do_simple_cmd(h, c, DEFAULT_REPLY_QUEUE, NO_TIMEOUT);
+ /* no unmap needed here because no data xfer. */
+ ei = c->err_info;
+ switch (ei->CommandStatus) {
+ case CMD_INVALID:
+ rc = 0;
+ break;
+ case CMD_UNABORTABLE:
+ case CMD_ABORT_FAILED:
+ rc = 1;
+ break;
+ default:
+ rc = 0;
+ break;
+ }
+ cmd_free(h, c);
+ return rc;
+}
+
static int hpsa_update_device_info(struct ctlr_info *h,
unsigned char scsi3addr[], struct hpsa_scsi_dev_t *this_device,
unsigned char *is_OBDR_device)
@@ -2917,7 +2975,6 @@ static int hpsa_update_device_info(struct ctlr_info *h,
strncmp(obdr_sig, OBDR_TAPE_SIG,
OBDR_SIG_LEN) == 0);
}
-
kfree(inq_buff);
return 0;
@@ -2926,6 +2983,31 @@ bail_out:
return 1;
}
+static void hpsa_update_device_supports_aborts(struct ctlr_info *h,
+ struct hpsa_scsi_dev_t *dev, u8 *scsi3addr)
+{
+ unsigned long flags;
+ int rc, entry;
+ /*
+ * See if this device supports aborts. If we already know
+ * the device, we already know if it supports aborts, otherwise
+ * we have to find out if it supports aborts by trying one.
+ */
+ spin_lock_irqsave(&h->devlock, flags);
+ rc = hpsa_scsi_find_entry(dev, h->dev, h->ndevices, &entry);
+ if ((rc == DEVICE_SAME || rc == DEVICE_UPDATED) &&
+ entry >= 0 && entry < h->ndevices) {
+ dev->supports_aborts = h->dev[entry]->supports_aborts;
+ spin_unlock_irqrestore(&h->devlock, flags);
+ } else {
+ spin_unlock_irqrestore(&h->devlock, flags);
+ dev->supports_aborts =
+ hpsa_device_supports_aborts(h, scsi3addr);
+ if (dev->supports_aborts < 0)
+ dev->supports_aborts = 0;
+ }
+}
+
static unsigned char *ext_target_model[] = {
"MSA2012",
"MSA2024",
@@ -3031,6 +3113,7 @@ static int add_ext_target_dev(struct ctlr_info *h,
(*n_ext_target_devs)++;
hpsa_set_bus_target_lun(this_device,
tmpdevice->bus, tmpdevice->target, 0);
+ hpsa_update_device_supports_aborts(h, this_device, scsi3addr);
set_bit(tmpdevice->target, lunzerobits);
return 1;
}
@@ -3285,6 +3368,7 @@ static void hpsa_update_scsi_devices(struct ctlr_info *h, int hostno)
&is_OBDR))
continue; /* skip it if we can't talk to it. */
figure_bus_target_lun(h, lunaddrbytes, tmpdevice);
+ hpsa_update_device_supports_aborts(h, tmpdevice, lunaddrbytes);
this_device = currentsd[ncurrent];
/*
@@ -4596,7 +4680,7 @@ static void hpsa_get_tag(struct ctlr_info *h,
}
static int hpsa_send_abort(struct ctlr_info *h, unsigned char *scsi3addr,
- struct CommandList *abort, int swizzle, int reply_queue)
+ struct CommandList *abort, int reply_queue)
{
int rc = IO_OK;
struct CommandList *c;
@@ -4610,9 +4694,9 @@ static int hpsa_send_abort(struct ctlr_info *h, unsigned char *scsi3addr,
}
/* fill_cmd can't fail here, no buffer to map */
- (void) fill_cmd(c, HPSA_ABORT_MSG, h, abort,
+ (void) fill_cmd(c, HPSA_ABORT_MSG, h, &abort->Header.tag,
0, 0, scsi3addr, TYPE_MSG);
- if (swizzle)
+ if (h->needs_abort_tags_swizzled)
swizzle_abort_tag(&c->Request.CDB[4]);
(void) hpsa_scsi_do_simple_cmd(h, c, reply_queue, NO_TIMEOUT);
hpsa_get_tag(h, abort, &taglower, &tagupper);
@@ -4717,12 +4801,6 @@ static int hpsa_send_reset_as_abort_ioaccel2(struct ctlr_info *h,
return rc; /* success */
}
-/* Some Smart Arrays need the abort tag swizzled, and some don't. It's hard to
- * tell which kind we're dealing with, so we send the abort both ways. There
- * shouldn't be any collisions between swizzled and unswizzled tags due to the
- * way we construct our tags but we check anyway in case the assumptions which
- * make this true someday become false.
- */
static int hpsa_send_abort_both_ways(struct ctlr_info *h,
unsigned char *scsi3addr, struct CommandList *abort, int reply_queue)
{
@@ -4734,9 +4812,7 @@ static int hpsa_send_abort_both_ways(struct ctlr_info *h,
if (abort->cmd_type == CMD_IOACCEL2)
return hpsa_send_reset_as_abort_ioaccel2(h, scsi3addr,
abort, reply_queue);
-
- return hpsa_send_abort(h, scsi3addr, abort, 0, reply_queue) &&
- hpsa_send_abort(h, scsi3addr, abort, 1, reply_queue);
+ return hpsa_send_abort(h, scsi3addr, abort, reply_queue);
}
/* Find out which reply queue a command was meant to return on */
@@ -4748,6 +4824,18 @@ static int hpsa_extract_reply_queue(struct ctlr_info *h,
return c->Header.ReplyQueue;
}
+/*
+ * Limit concurrency of abort commands to prevent
+ * over-subscription of commands
+ */
+static inline int wait_for_available_abort_cmd(struct ctlr_info *h)
+{
+#define ABORT_CMD_WAIT_MSECS 5000
+ return !wait_event_timeout(h->abort_cmd_wait_queue,
+ atomic_dec_if_positive(&h->abort_cmds_available) >= 0,
+ msecs_to_jiffies(ABORT_CMD_WAIT_MSECS));
+}
+
/* Send an abort for the specified command.
* If the device and controller support it,
* send a task abort request.
@@ -4765,10 +4853,12 @@ static int hpsa_eh_abort_handler(struct scsi_cmnd *sc)
__le32 tagupper, taglower;
int refcount, reply_queue;
+ if (sc->device == NULL)
+ return FAILED;
+
/* Find the controller of the command to be aborted */
h = sdev_to_hba(sc->device);
- if (WARN(h == NULL,
- "ABORT REQUEST FAILED, Controller lookup failed.\n"))
+ if (h == NULL)
return FAILED;
/* If controller locked up, we can guarantee command won't complete */
@@ -4818,6 +4908,14 @@ static int hpsa_eh_abort_handler(struct scsi_cmnd *sc)
cmd_free(h, abort);
return SUCCESS;
}
+
+ /* Don't bother trying the abort if we know it won't work. */
+ if (abort->cmd_type != CMD_IOACCEL2 &&
+ abort->cmd_type != CMD_IOACCEL1 && !dev->supports_aborts) {
+ cmd_free(h, abort);
+ return FAILED;
+ }
+
hpsa_get_tag(h, abort, &taglower, &tagupper);
reply_queue = hpsa_extract_reply_queue(h, abort);
ml += sprintf(msg+ml, "Tag:0x%08x:%08x ", tagupper, taglower);
@@ -4833,7 +4931,15 @@ static int hpsa_eh_abort_handler(struct scsi_cmnd *sc)
* by the firmware (but not to the scsi mid layer) but we can't
* distinguish which. Send the abort down.
*/
+ if (wait_for_available_abort_cmd(h)) {
+ dev_warn(&h->pdev->dev,
+ "Timed out waiting for an abort command to become available.\n");
+ cmd_free(h, abort);
+ return FAILED;
+ }
rc = hpsa_send_abort_both_ways(h, dev->scsi3addr, abort, reply_queue);
+ atomic_inc(&h->abort_cmds_available);
+ wake_up_all(&h->abort_cmd_wait_queue);
if (rc != 0) {
dev_warn(&h->pdev->dev, "FAILED abort command on scsi %d:%d:%d:%d\n",
h->scsi_host->host_no,
@@ -5404,7 +5510,7 @@ static int fill_cmd(struct CommandList *c, u8 cmd, struct ctlr_info *h,
int cmd_type)
{
int pci_dir = XFER_NONE;
- struct CommandList *a; /* for commands to be aborted */
+ u64 tag; /* for commands to be aborted */
c->cmd_type = CMD_IOCTL_PEND;
c->Header.ReplyQueue = 0;
@@ -5520,10 +5626,10 @@ static int fill_cmd(struct CommandList *c, u8 cmd, struct ctlr_info *h,
c->Request.CDB[7] = 0x00;
break;
case HPSA_ABORT_MSG:
- a = buff; /* point to command to be aborted */
+ memcpy(&tag, buff, sizeof(tag));
dev_dbg(&h->pdev->dev,
- "Abort Tag:0x%016llx request Tag:0x%016llx",
- a->Header.tag, c->Header.tag);
+ "Abort Tag:0x%016llx using rqst Tag:0x%016llx",
+ tag, c->Header.tag);
c->Request.CDBLen = 16;
c->Request.type_attr_dir =
TYPE_ATTR_DIR(cmd_type,
@@ -5534,8 +5640,7 @@ static int fill_cmd(struct CommandList *c, u8 cmd, struct ctlr_info *h,
c->Request.CDB[2] = 0x00; /* reserved */
c->Request.CDB[3] = 0x00; /* reserved */
/* Tag to abort goes in CDB[4]-CDB[11] */
- memcpy(&c->Request.CDB[4], &a->Header.tag,
- sizeof(a->Header.tag));
+ memcpy(&c->Request.CDB[4], &tag, sizeof(tag));
c->Request.CDB[12] = 0x00; /* reserved */
c->Request.CDB[13] = 0x00; /* reserved */
c->Request.CDB[14] = 0x00; /* reserved */
@@ -6492,6 +6597,9 @@ static int hpsa_pci_init(struct ctlr_info *h)
h->product_name = products[prod_index].product_name;
h->access = *(products[prod_index].access);
+ h->needs_abort_tags_swizzled =
+ ctlr_needs_abort_tags_swizzled(h->board_id);
+
pci_disable_link_state(h->pdev, PCIE_LINK_STATE_L0S |
PCIE_LINK_STATE_L1 | PCIE_LINK_STATE_CLKPM);
@@ -7106,6 +7214,7 @@ reinit_after_soft_reset:
spin_lock_init(&h->offline_device_lock);
spin_lock_init(&h->scan_lock);
atomic_set(&h->passthru_cmds_avail, HPSA_MAX_CONCURRENT_PASSTHRUS);
+ atomic_set(&h->abort_cmds_available, HPSA_CMDS_RESERVED_FOR_ABORTS);
h->rescan_ctlr_wq = hpsa_create_controller_wq(h, "rescan");
if (!h->rescan_ctlr_wq) {
@@ -7163,6 +7272,7 @@ reinit_after_soft_reset:
if (hpsa_allocate_sg_chain_blocks(h))
goto clean4;
init_waitqueue_head(&h->scan_wait_queue);
+ init_waitqueue_head(&h->abort_cmd_wait_queue);
h->scan_finished = 1; /* no scan currently in progress */
pci_set_drvdata(pdev, h);
diff --git a/drivers/scsi/hpsa.h b/drivers/scsi/hpsa.h
index 58f3315..df2468c 100644
--- a/drivers/scsi/hpsa.h
+++ b/drivers/scsi/hpsa.h
@@ -69,6 +69,7 @@ struct hpsa_scsi_dev_t {
* devices in order to honor physical device queue depth limits.
*/
struct hpsa_scsi_dev_t *phys_disk[RAID_MAP_MAX_ENTRIES];
+ int supports_aborts;
#define HPSA_DO_NOT_EXPOSE 0x0
#define HPSA_SG_ATTACH 0x1
#define HPSA_ULD_ATTACH 0x2
@@ -257,8 +258,11 @@ struct ctlr_info {
struct list_head offline_device_list;
int acciopath_status;
int raid_offload_debug;
+ int needs_abort_tags_swizzled;
struct workqueue_struct *resubmit_wq;
struct workqueue_struct *rescan_ctlr_wq;
+ atomic_t abort_cmds_available;
+ wait_queue_head_t abort_cmd_wait_queue;
};
struct offline_device_entry {
^ permalink raw reply related [flat|nested] 58+ messages in thread* [PATCH 05/43] hpsa: decrement h->commands_outstanding in fail_all_outstanding_cmds
2015-02-21 22:17 [PATCH 00/43] hpsa updates Don Brace
` (3 preceding siblings ...)
2015-02-21 22:17 ` [PATCH 04/43] hpsa: clean up aborts Don Brace
@ 2015-02-21 22:17 ` Don Brace
2015-02-21 22:18 ` [PATCH 06/43] hpsa: hpsa decode sense data for io and tmf Don Brace
` (37 subsequent siblings)
42 siblings, 0 replies; 58+ messages in thread
From: Don Brace @ 2015-02-21 22:17 UTC (permalink / raw)
To: scott.teel, Kevin.Barnett, james.bottomley, hch, Justin.Lindley,
brace
Cc: linux-scsi
From: Stephen Cameron <stephenmcameron@gmail.com>
make tracking of outstanding commands more robust
Reviewed-by: Scott Teel <scott.teel@pmcs.com>
Reviewed-by: Kevin Barnett <kevin.barnett@pmcs.com>
Signed-off-by: Don Brace <don.brace@pmcs.com>
---
drivers/scsi/hpsa.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index 7c71d8d..c70be42 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -6954,7 +6954,7 @@ static void fail_all_outstanding_cmds(struct ctlr_info *h)
if (refcount > 1) {
c->err_info->CommandStatus = CMD_CTLR_LOCKUP;
finish_cmd(c);
- failcount++;
+ atomic_dec(&h->commands_outstanding);
}
cmd_free(h, c);
}
^ permalink raw reply related [flat|nested] 58+ messages in thread* [PATCH 06/43] hpsa: hpsa decode sense data for io and tmf
2015-02-21 22:17 [PATCH 00/43] hpsa updates Don Brace
` (4 preceding siblings ...)
2015-02-21 22:17 ` [PATCH 05/43] hpsa: decrement h->commands_outstanding in fail_all_outstanding_cmds Don Brace
@ 2015-02-21 22:18 ` Don Brace
2015-02-23 20:18 ` Christoph Hellwig
2015-02-21 22:18 ` [PATCH 07/43] hpsa: allow lockup detected to be viewed via sysfs Don Brace
` (36 subsequent siblings)
42 siblings, 1 reply; 58+ messages in thread
From: Don Brace @ 2015-02-21 22:18 UTC (permalink / raw)
To: scott.teel, Kevin.Barnett, james.bottomley, hch, Justin.Lindley,
brace
Cc: linux-scsi
From: Stephen Cameron <stephenmcameron@gmail.com>
In hba mode, we could get sense data in descriptor format so
we need to handle that.
It's possible for CommandStatus to have value 0x0D
"TMF Function Status", which we should handle. We will get
this from a P1224 when aborting a non-existent tag, for
example. The "ScsiStatus" field of the errinfo field
will contain the TMF function status value.
Reviewed-by: Scott Teel <scott.teel@pmcs.com>
Reviewed-by: Kevin Barnett <kevin.barnett@pmcs.com>
Signed-off-by: Don Brace <don.brace@pmcs.com>
---
drivers/scsi/hpsa.c | 150 ++++++++++++++++++++++++++++++++++++-----------
drivers/scsi/hpsa_cmd.h | 9 +++
2 files changed, 124 insertions(+), 35 deletions(-)
diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index c70be42..bae8df8 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -268,16 +268,57 @@ static inline struct ctlr_info *shost_to_hba(struct Scsi_Host *sh)
return (struct ctlr_info *) *priv;
}
+/* extract sense key, asc, and ascq from sense data. -1 means invalid. */
+static void decode_sense_data(const u8 *sense_data, int sense_data_len,
+ int *sense_key, int *asc, int *ascq)
+{
+ if (sense_data_len < 1) {
+ *sense_key = -1;
+ *ascq = -1;
+ *asc = -1;
+ return;
+ }
+
+ switch (sense_data[0]) {
+ case 0x70: /* old format sense data */
+ *sense_key = (sense_data_len > 2) ? sense_data[2] & 0x0f : -1;
+ *ascq = (sense_data_len > 13) ? sense_data[13] : -1;
+ *asc = (sense_data_len > 12) ? sense_data[12] : -1;
+ break;
+ case 0x72: /* descriptor format sense data */
+ *sense_key = (sense_data_len > 1) ? sense_data[1] & 0x0f : -1;
+ *ascq = (sense_data_len > 2) ? sense_data[2] : -1;
+ *asc = (sense_data_len > 3) ? sense_data[3] : -1;
+ break;
+ default:
+ *sense_key = -1;
+ *ascq = -1;
+ *asc = -1;
+ break;
+ }
+}
+
static int check_for_unit_attention(struct ctlr_info *h,
struct CommandList *c)
{
- if (c->err_info->SenseInfo[2] != UNIT_ATTENTION)
+ int sense_key, asc, ascq;
+ int sense_len;
+
+ if (c->err_info->SenseLen > sizeof(c->err_info->SenseInfo))
+ sense_len = sizeof(c->err_info->SenseInfo);
+ else
+ sense_len = c->err_info->SenseLen;
+
+ decode_sense_data(c->err_info->SenseInfo, sense_len,
+ &sense_key, &asc, &ascq);
+ if (sense_key != UNIT_ATTENTION || asc == -1)
return 0;
- switch (c->err_info->SenseInfo[12]) {
+ switch (asc) {
case STATE_CHANGED:
- dev_warn(&h->pdev->dev, HPSA "%d: a state change "
- "detected, command retried\n", h->ctlr);
+ dev_warn(&h->pdev->dev,
+ HPSA "%d: a state change detected, command retried\n",
+ h->ctlr);
break;
case LUN_FAILED:
dev_warn(&h->pdev->dev,
@@ -1903,6 +1944,34 @@ retry_cmd:
queue_work_on(raw_smp_processor_id(), h->resubmit_wq, &c->work);
}
+/* Returns 0 on success, < 0 otherwise. */
+static int hpsa_evaluate_tmf_status(struct ctlr_info *h,
+ struct CommandList *cp)
+{
+ u8 tmf_status = cp->err_info->ScsiStatus;
+
+ switch (tmf_status) {
+ case CISS_TMF_COMPLETE:
+ /*
+ * CISS_TMF_COMPLETE never happens, instead,
+ * ei->CommandStatus == 0 for this case.
+ */
+ case CISS_TMF_SUCCESS:
+ return 0;
+ case CISS_TMF_INVALID_FRAME:
+ case CISS_TMF_NOT_SUPPORTED:
+ case CISS_TMF_FAILED:
+ case CISS_TMF_WRONG_LUN:
+ case CISS_TMF_OVERLAPPED_TAG:
+ break;
+ default:
+ dev_warn(&h->pdev->dev, "Unknown TMF status: 0x%02x\n",
+ tmf_status);
+ break;
+ }
+ return -tmf_status;
+}
+
static void complete_scsi_command(struct CommandList *cp)
{
struct scsi_cmnd *cmd;
@@ -1910,9 +1979,9 @@ static void complete_scsi_command(struct CommandList *cp)
struct ErrorInfo *ei;
struct hpsa_scsi_dev_t *dev;
- unsigned char sense_key;
- unsigned char asc; /* additional sense code */
- unsigned char ascq; /* additional sense code qualifier */
+ int sense_key;
+ int asc; /* additional sense code */
+ int ascq; /* additional sense code qualifier */
unsigned long sense_data_size;
ei = cp->err_info;
@@ -1947,8 +2016,6 @@ static void complete_scsi_command(struct CommandList *cp)
if (cp->cmd_type == CMD_IOACCEL2)
return process_ioaccel2_completion(h, cp, cmd, dev);
- cmd->result |= ei->ScsiStatus;
-
scsi_set_resid(cmd, ei->ResidualCnt);
if (ei->CommandStatus == 0) {
if (cp->cmd_type == CMD_IOACCEL1)
@@ -1958,16 +2025,6 @@ static void complete_scsi_command(struct CommandList *cp)
return;
}
- /* copy the sense data */
- if (SCSI_SENSE_BUFFERSIZE < sizeof(ei->SenseInfo))
- sense_data_size = SCSI_SENSE_BUFFERSIZE;
- else
- sense_data_size = sizeof(ei->SenseInfo);
- if (ei->SenseLen < sense_data_size)
- sense_data_size = ei->SenseLen;
-
- memcpy(cmd->sense_buffer, ei->SenseInfo, sense_data_size);
-
/* For I/O accelerator commands, copy over some fields to the normal
* CISS header used below for error handling.
*/
@@ -1999,14 +2056,18 @@ static void complete_scsi_command(struct CommandList *cp)
switch (ei->CommandStatus) {
case CMD_TARGET_STATUS:
- if (ei->ScsiStatus) {
- /* Get sense key */
- sense_key = 0xf & ei->SenseInfo[2];
- /* Get additional sense code */
- asc = ei->SenseInfo[12];
- /* Get addition sense code qualifier */
- ascq = ei->SenseInfo[13];
- }
+ cmd->result |= ei->ScsiStatus;
+ /* copy the sense data */
+ if (SCSI_SENSE_BUFFERSIZE < sizeof(ei->SenseInfo))
+ sense_data_size = SCSI_SENSE_BUFFERSIZE;
+ else
+ sense_data_size = sizeof(ei->SenseInfo);
+ if (ei->SenseLen < sense_data_size)
+ sense_data_size = ei->SenseLen;
+ memcpy(cmd->sense_buffer, ei->SenseInfo, sense_data_size);
+ if (ei->ScsiStatus)
+ decode_sense_data(ei->SenseInfo, sense_data_size,
+ &sense_key, &asc, &ascq);
if (ei->ScsiStatus == SAM_STAT_CHECK_CONDITION) {
if (sense_key == ABORTED_COMMAND) {
cmd->result |= DID_SOFT_ERROR << 16;
@@ -2101,6 +2162,10 @@ static void complete_scsi_command(struct CommandList *cp)
cmd->result = DID_ERROR << 16;
dev_warn(&h->pdev->dev, "Command unabortable\n");
break;
+ case CMD_TMF_STATUS:
+ if (hpsa_evaluate_tmf_status(h, cp)) /* TMF failed? */
+ cmd->result = DID_ERROR << 16;
+ break;
case CMD_IOACCEL_DISABLED:
/* This only handles the direct pass-through case since RAID
* offload is handled above. Just attempt a retry.
@@ -2251,16 +2316,22 @@ static void hpsa_scsi_interpret_error(struct ctlr_info *h,
{
const struct ErrorInfo *ei = cp->err_info;
struct device *d = &cp->h->pdev->dev;
- const u8 *sd = ei->SenseInfo;
+ int sense_key, asc, ascq, sense_len;
switch (ei->CommandStatus) {
case CMD_TARGET_STATUS:
+ if (ei->SenseLen > sizeof(ei->SenseInfo))
+ sense_len = sizeof(ei->SenseInfo);
+ else
+ sense_len = ei->SenseLen;
+ decode_sense_data(ei->SenseInfo, sense_len,
+ &sense_key, &asc, &ascq);
hpsa_print_cmd(h, "SCSI status", cp);
if (ei->ScsiStatus == SAM_STAT_CHECK_CONDITION)
- dev_warn(d, "SCSI Status = 02, Sense key = %02x, ASC = %02x, ASCQ = %02x\n",
- sd[2] & 0x0f, sd[12], sd[13]);
+ dev_warn(d, "SCSI Status = 02, Sense key = 0x%02x, ASC = 0x%02x, ASCQ = 0x%02x\n",
+ sense_key, asc, ascq);
else
- dev_warn(d, "SCSI Status = %02x\n", ei->ScsiStatus);
+ dev_warn(d, "SCSI Status = 0x%02x\n", ei->ScsiStatus);
if (ei->ScsiStatus == 0)
dev_warn(d, "SCSI status is abnormally zero. "
"(probably indicates selection timeout "
@@ -2805,7 +2876,8 @@ static int hpsa_volume_offline(struct ctlr_info *h,
unsigned char scsi3addr[])
{
struct CommandList *c;
- unsigned char *sense, sense_key, asc, ascq;
+ unsigned char *sense;
+ int sense_key, asc, ascq, sense_len;
int rc, ldstat = 0;
u16 cmd_status;
u8 scsi_status;
@@ -2823,9 +2895,11 @@ static int hpsa_volume_offline(struct ctlr_info *h,
return 0;
}
sense = c->err_info->SenseInfo;
- sense_key = sense[2];
- asc = sense[12];
- ascq = sense[13];
+ if (c->err_info->SenseLen > sizeof(c->err_info->SenseInfo))
+ sense_len = sizeof(c->err_info->SenseInfo);
+ else
+ sense_len = c->err_info->SenseLen;
+ decode_sense_data(sense, sense_len, &sense_key, &asc, &ascq);
cmd_status = c->err_info->CommandStatus;
scsi_status = c->err_info->ScsiStatus;
cmd_free(h, c);
@@ -2901,6 +2975,9 @@ static int hpsa_device_supports_aborts(struct ctlr_info *h,
case CMD_ABORT_FAILED:
rc = 1;
break;
+ case CMD_TMF_STATUS:
+ rc = hpsa_evaluate_tmf_status(h, c);
+ break;
default:
rc = 0;
break;
@@ -4708,6 +4785,9 @@ static int hpsa_send_abort(struct ctlr_info *h, unsigned char *scsi3addr,
switch (ei->CommandStatus) {
case CMD_SUCCESS:
break;
+ case CMD_TMF_STATUS:
+ rc = hpsa_evaluate_tmf_status(h, c);
+ break;
case CMD_UNABORTABLE: /* Very common, don't make noise. */
rc = -1;
break;
diff --git a/drivers/scsi/hpsa_cmd.h b/drivers/scsi/hpsa_cmd.h
index f52c847..f6ca5fa 100644
--- a/drivers/scsi/hpsa_cmd.h
+++ b/drivers/scsi/hpsa_cmd.h
@@ -42,6 +42,7 @@
#define CMD_UNSOLICITED_ABORT 0x000A
#define CMD_TIMEOUT 0x000B
#define CMD_UNABORTABLE 0x000C
+#define CMD_TMF_STATUS 0x000D
#define CMD_IOACCEL_DISABLED 0x000E
#define CMD_CTLR_LOCKUP 0xffff
/* Note: CMD_CTLR_LOCKUP is not a value defined by the CISS spec
@@ -49,6 +50,14 @@
* with when a controller lockup has been detected by the driver
*/
+/* TMF function status values */
+#define CISS_TMF_COMPLETE 0x00
+#define CISS_TMF_INVALID_FRAME 0x02
+#define CISS_TMF_NOT_SUPPORTED 0x04
+#define CISS_TMF_FAILED 0x05
+#define CISS_TMF_SUCCESS 0x08
+#define CISS_TMF_WRONG_LUN 0x09
+#define CISS_TMF_OVERLAPPED_TAG 0x0a
/* Unit Attentions ASC's as defined for the MSA2012sa */
#define POWER_OR_RESET 0x29
^ permalink raw reply related [flat|nested] 58+ messages in thread* Re: [PATCH 06/43] hpsa: hpsa decode sense data for io and tmf
2015-02-21 22:18 ` [PATCH 06/43] hpsa: hpsa decode sense data for io and tmf Don Brace
@ 2015-02-23 20:18 ` Christoph Hellwig
2015-02-25 18:06 ` brace
0 siblings, 1 reply; 58+ messages in thread
From: Christoph Hellwig @ 2015-02-23 20:18 UTC (permalink / raw)
To: Don Brace
Cc: scott.teel, Kevin.Barnett, james.bottomley, hch, Justin.Lindley,
brace, linux-scsi
On Sat, Feb 21, 2015 at 04:18:03PM -0600, Don Brace wrote:
> +/* extract sense key, asc, and ascq from sense data. -1 means invalid. */
> +static void decode_sense_data(const u8 *sense_data, int sense_data_len,
> + int *sense_key, int *asc, int *ascq)
> +{
Can't you just use scsi_normalize_sense()?
^ permalink raw reply [flat|nested] 58+ messages in thread* RE: [PATCH 06/43] hpsa: hpsa decode sense data for io and tmf
2015-02-23 20:18 ` Christoph Hellwig
@ 2015-02-25 18:06 ` brace
0 siblings, 0 replies; 58+ messages in thread
From: brace @ 2015-02-25 18:06 UTC (permalink / raw)
To: Christoph Hellwig
Cc: Scott Teel, Kevin Barnett, james.bottomley@parallels.com,
Justin Lindley, brace, linux-scsi@vger.kernel.org
This is intriguing. And you found a bug in our version of the decode_sense_data function, the ASC/ASCQ bytes are reversed for the descriptor formatted sense data.
Cool.
I'll try to work this in...
> -----Original Message-----
> From: Christoph Hellwig [mailto:hch@infradead.org]
> Sent: Monday, February 23, 2015 2:18 PM
> To: Don Brace
> Cc: Scott Teel; Kevin Barnett; james.bottomley@parallels.com;
> hch@infradead.org; Justin Lindley; brace; linux-scsi@vger.kernel.org
> Subject: Re: [PATCH 06/43] hpsa: hpsa decode sense data for io and tmf
>
> On Sat, Feb 21, 2015 at 04:18:03PM -0600, Don Brace wrote:
> > +/* extract sense key, asc, and ascq from sense data. -1 means invalid. */
> > +static void decode_sense_data(const u8 *sense_data, int sense_data_len,
> > + int *sense_key, int *asc, int *ascq)
> > +{
>
> Can't you just use scsi_normalize_sense()?
^ permalink raw reply [flat|nested] 58+ messages in thread
* [PATCH 07/43] hpsa: allow lockup detected to be viewed via sysfs
2015-02-21 22:17 [PATCH 00/43] hpsa updates Don Brace
` (5 preceding siblings ...)
2015-02-21 22:18 ` [PATCH 06/43] hpsa: hpsa decode sense data for io and tmf Don Brace
@ 2015-02-21 22:18 ` Don Brace
2015-02-21 22:18 ` [PATCH 08/43] hpsa: make function names consistent Don Brace
` (35 subsequent siblings)
42 siblings, 0 replies; 58+ messages in thread
From: Don Brace @ 2015-02-21 22:18 UTC (permalink / raw)
To: scott.teel, Kevin.Barnett, james.bottomley, hch, Justin.Lindley,
brace
Cc: linux-scsi
From: Stephen Cameron <stephenmcameron@gmail.com>
expose a detected lockup via sysfs
Reviewed-by: Scott Teel <scott.teel@pmcs.com>
Reviewed-by: Kevin Barnett <kevin.barnett@pmcs.com>
Signed-off-by: Don Brace <don.brace@pmcs.com>
---
drivers/scsi/hpsa.c | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index bae8df8..287ad38 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -358,6 +358,20 @@ static int check_for_busy(struct ctlr_info *h, struct CommandList *c)
return 1;
}
+static u32 lockup_detected(struct ctlr_info *h);
+static ssize_t host_show_lockup_detected(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ int ld;
+ struct ctlr_info *h;
+ struct Scsi_Host *shost = class_to_shost(dev);
+
+ h = shost_to_hba(shost);
+ ld = lockup_detected(h);
+
+ return sprintf(buf, "ld=%d\n", ld);
+}
+
static ssize_t host_store_hp_ssd_smart_path_status(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
@@ -705,12 +719,15 @@ static DEVICE_ATTR(transport_mode, S_IRUGO,
host_show_transport_mode, NULL);
static DEVICE_ATTR(resettable, S_IRUGO,
host_show_resettable, NULL);
+static DEVICE_ATTR(lockup_detected, S_IRUGO,
+ host_show_lockup_detected, NULL);
static struct device_attribute *hpsa_sdev_attrs[] = {
&dev_attr_raid_level,
&dev_attr_lunid,
&dev_attr_unique_id,
&dev_attr_hp_ssd_smart_path_enabled,
+ &dev_attr_lockup_detected,
NULL,
};
^ permalink raw reply related [flat|nested] 58+ messages in thread* [PATCH 08/43] hpsa: make function names consistent
2015-02-21 22:17 [PATCH 00/43] hpsa updates Don Brace
` (6 preceding siblings ...)
2015-02-21 22:18 ` [PATCH 07/43] hpsa: allow lockup detected to be viewed via sysfs Don Brace
@ 2015-02-21 22:18 ` Don Brace
2015-02-21 22:18 ` [PATCH 09/43] hpsa: factor out hpsa_init_cmd function Don Brace
` (34 subsequent siblings)
42 siblings, 0 replies; 58+ messages in thread
From: Don Brace @ 2015-02-21 22:18 UTC (permalink / raw)
To: scott.teel, Kevin.Barnett, james.bottomley, hch, Justin.Lindley,
brace
Cc: linux-scsi
From: Robert Elliott <elliott@hp.com>
make function names more consistent and meaningful
Reviewed-by: Scott Teel <scott.teel@pmcs.com>
Reviewed-by: Kevin Barnett <kevin.barnett@pmcs.com>
Signed-off-by: Robert Elliott <elliott@hp.com>
Signed-off-by: Don Brace <don.brace@pmcs.com>
---
drivers/scsi/hpsa.c | 14 ++++++++------
1 file changed, 8 insertions(+), 6 deletions(-)
diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index 287ad38..ac0f992 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -6833,7 +6833,7 @@ out_disable:
return rc;
}
-static int hpsa_allocate_cmd_pool(struct ctlr_info *h)
+static int hpsa_alloc_cmd_pool(struct ctlr_info *h)
{
h->cmd_pool_bits = kzalloc(
DIV_ROUND_UP(h->nr_cmds, BITS_PER_LONG) *
@@ -7363,7 +7363,7 @@ reinit_after_soft_reset:
dev_info(&pdev->dev, "%s: <0x%x> at IRQ %d%s using DAC\n",
h->devname, pdev->device,
h->intr[h->intr_mode], dac ? "" : " not");
- rc = hpsa_allocate_cmd_pool(h);
+ rc = hpsa_alloc_cmd_pool(h);
if (rc)
goto clean2_and_free_irqs;
if (hpsa_allocate_sg_chain_blocks(h))
@@ -7810,7 +7810,8 @@ static int hpsa_enter_performant_mode(struct ctlr_info *h, u32 trans_support)
return 0;
}
-static int hpsa_alloc_ioaccel_cmd_and_bft(struct ctlr_info *h)
+/* Allocate ioaccel1 mode command blocks and block fetch table */
+static int hpsa_alloc_ioaccel1_cmd_and_bft(struct ctlr_info *h)
{
h->ioaccel_maxsg =
readl(&(h->cfgtable->io_accel_max_embedded_sg_count));
@@ -7849,7 +7850,8 @@ clean_up:
return 1;
}
-static int ioaccel2_alloc_cmds_and_bft(struct ctlr_info *h)
+/* Allocate ioaccel2 mode command blocks and block fetch table */
+static int hpsa_alloc_ioaccel2_cmd_and_bft(struct ctlr_info *h)
{
/* Allocate ioaccel2 mode command blocks and block fetch table */
@@ -7904,13 +7906,13 @@ static void hpsa_put_ctlr_into_performant_mode(struct ctlr_info *h)
if (trans_support & CFGTBL_Trans_io_accel1) {
transMethod |= CFGTBL_Trans_io_accel1 |
CFGTBL_Trans_enable_directed_msix;
- if (hpsa_alloc_ioaccel_cmd_and_bft(h))
+ if (hpsa_alloc_ioaccel1_cmd_and_bft(h))
goto clean_up;
} else {
if (trans_support & CFGTBL_Trans_io_accel2) {
transMethod |= CFGTBL_Trans_io_accel2 |
CFGTBL_Trans_enable_directed_msix;
- if (ioaccel2_alloc_cmds_and_bft(h))
+ if (hpsa_alloc_ioaccel2_cmd_and_bft(h))
goto clean_up;
}
}
^ permalink raw reply related [flat|nested] 58+ messages in thread* [PATCH 09/43] hpsa: factor out hpsa_init_cmd function
2015-02-21 22:17 [PATCH 00/43] hpsa updates Don Brace
` (7 preceding siblings ...)
2015-02-21 22:18 ` [PATCH 08/43] hpsa: make function names consistent Don Brace
@ 2015-02-21 22:18 ` Don Brace
2015-02-21 22:18 ` [PATCH 10/43] hpsa: do not ignore return value of hpsa_register_scsi Don Brace
` (33 subsequent siblings)
42 siblings, 0 replies; 58+ messages in thread
From: Don Brace @ 2015-02-21 22:18 UTC (permalink / raw)
To: scott.teel, Kevin.Barnett, james.bottomley, hch, Justin.Lindley,
brace
Cc: linux-scsi
From: Stephen Cameron <stephenmcameron@gmail.com>
Factor out hpsa_cmd_init from cmd_alloc(). We also need
this for resubmitting commands down the default RAID path
when they have returned from the ioaccel paths with errors.
In particular, reinitialize the cmd_type and busaddr fields as these
will not be correct for submitting down the RAID stack path
after ioaccel command completion.
This saves time when submitting commands.
Reviewed-by: Scott Teel <scott.teel@pmcs.com>
Reviewed-by: Kevin Barnett <kevin.barnett@pmcs.com>
Signed-off-by: Don Brace <don.brace@pmcs.com>
---
drivers/scsi/hpsa.c | 77 ++++++++++++++++++++++++++++++++---------------
drivers/scsi/hpsa_cmd.h | 2 +
2 files changed, 53 insertions(+), 26 deletions(-)
diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index ac0f992..361937a 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -4337,7 +4337,6 @@ static int hpsa_ciss_submit(struct ctlr_info *h,
/* Fill in the request block... */
c->Request.Timeout = 0;
- memset(c->Request.CDB, 0, sizeof(c->Request.CDB));
BUG_ON(cmd->cmd_len > sizeof(c->Request.CDB));
c->Request.CDBLen = cmd->cmd_len;
memcpy(c->Request.CDB, cmd->cmnd, cmd->cmd_len);
@@ -4388,6 +4387,48 @@ static int hpsa_ciss_submit(struct ctlr_info *h,
return 0;
}
+static void hpsa_cmd_init(struct ctlr_info *h, int index,
+ struct CommandList *c)
+{
+ dma_addr_t cmd_dma_handle, err_dma_handle;
+
+ /* Zero out all of commandlist except the last field, refcount */
+ memset(c, 0, offsetof(struct CommandList, refcount));
+ c->Header.tag = cpu_to_le64((u64) (index << DIRECT_LOOKUP_SHIFT));
+ cmd_dma_handle = h->cmd_pool_dhandle + index * sizeof(*c);
+ c->err_info = h->errinfo_pool + index;
+ memset(c->err_info, 0, sizeof(*c->err_info));
+ err_dma_handle = h->errinfo_pool_dhandle
+ + index * sizeof(*c->err_info);
+ c->cmdindex = index;
+ c->busaddr = (u32) cmd_dma_handle;
+ c->ErrDesc.Addr = cpu_to_le64((u64) err_dma_handle);
+ c->ErrDesc.Len = cpu_to_le32((u32) sizeof(*c->err_info));
+ c->h = h;
+}
+
+static void hpsa_preinitialize_commands(struct ctlr_info *h)
+{
+ int i;
+
+ for (i = 0; i < h->nr_cmds; i++) {
+ struct CommandList *c = h->cmd_pool + i;
+
+ hpsa_cmd_init(h, i, c);
+ atomic_set(&c->refcount, 0);
+ }
+}
+
+static inline void hpsa_cmd_partial_init(struct ctlr_info *h, int index,
+ struct CommandList *c)
+{
+ dma_addr_t cmd_dma_handle = h->cmd_pool_dhandle + index * sizeof(*c);
+
+ memset(c->Request.CDB, 0, sizeof(c->Request.CDB));
+ memset(c->err_info, 0, sizeof(*c->err_info));
+ c->busaddr = (u32) cmd_dma_handle;
+}
+
static void hpsa_command_resubmit_worker(struct work_struct *work)
{
struct scsi_cmnd *cmd;
@@ -4402,6 +4443,7 @@ static void hpsa_command_resubmit_worker(struct work_struct *work)
cmd->scsi_done(cmd);
return;
}
+ hpsa_cmd_partial_init(c->h, c->cmdindex, c);
if (hpsa_ciss_submit(c->h, c, cmd, dev->scsi3addr)) {
/*
* If we get here, it means dma mapping failed. Try
@@ -4458,10 +4500,11 @@ static int hpsa_scsi_queue_command(struct Scsi_Host *sh, struct scsi_cmnd *cmd)
h->acciopath_status)) {
cmd->host_scribble = (unsigned char *) c;
- c->cmd_type = CMD_SCSI;
- c->scsi_cmd = cmd;
if (dev->offload_enabled) {
+ hpsa_cmd_init(h, c->cmdindex, c);
+ c->cmd_type = CMD_SCSI;
+ c->scsi_cmd = cmd;
rc = hpsa_scsi_ioaccel_raid_map(h, c);
if (rc == 0)
return 0; /* Sent on ioaccel path */
@@ -4470,6 +4513,9 @@ static int hpsa_scsi_queue_command(struct Scsi_Host *sh, struct scsi_cmnd *cmd)
return SCSI_MLQUEUE_HOST_BUSY;
}
} else if (dev->ioaccel_handle) {
+ hpsa_cmd_init(h, c->cmdindex, c);
+ c->cmd_type = CMD_SCSI;
+ c->scsi_cmd = cmd;
rc = hpsa_scsi_ioaccel_direct_map(h, c);
if (rc == 0)
return 0; /* Sent on direct map path */
@@ -5077,10 +5123,7 @@ static int hpsa_eh_abort_handler(struct scsi_cmnd *sc)
static struct CommandList *cmd_alloc(struct ctlr_info *h)
{
struct CommandList *c;
- int i;
- union u64bit temp64;
- dma_addr_t cmd_dma_handle, err_dma_handle;
- int refcount;
+ int refcount, i;
unsigned long offset;
/*
@@ -5114,24 +5157,7 @@ static struct CommandList *cmd_alloc(struct ctlr_info *h)
break; /* it's ours now. */
}
h->last_allocation = i; /* benignly racy */
-
- /* Zero out all of commandlist except the last field, refcount */
- memset(c, 0, offsetof(struct CommandList, refcount));
- c->Header.tag = cpu_to_le64((u64) (i << DIRECT_LOOKUP_SHIFT));
- cmd_dma_handle = h->cmd_pool_dhandle + i * sizeof(*c);
- c->err_info = h->errinfo_pool + i;
- memset(c->err_info, 0, sizeof(*c->err_info));
- err_dma_handle = h->errinfo_pool_dhandle
- + i * sizeof(*c->err_info);
-
- c->cmdindex = i;
-
- c->busaddr = (u32) cmd_dma_handle;
- temp64.val = (u64) err_dma_handle;
- c->ErrDesc.Addr = cpu_to_le64((u64) err_dma_handle);
- c->ErrDesc.Len = cpu_to_le32((u32) sizeof(*c->err_info));
-
- c->h = h;
+ hpsa_cmd_partial_init(h, i, c);
return c;
}
@@ -6850,6 +6876,7 @@ static int hpsa_alloc_cmd_pool(struct ctlr_info *h)
dev_err(&h->pdev->dev, "out of memory in %s", __func__);
goto clean_up;
}
+ hpsa_preinitialize_commands(h);
return 0;
clean_up:
hpsa_free_cmd_pool(h);
diff --git a/drivers/scsi/hpsa_cmd.h b/drivers/scsi/hpsa_cmd.h
index f6ca5fa..0efb6f2b 100644
--- a/drivers/scsi/hpsa_cmd.h
+++ b/drivers/scsi/hpsa_cmd.h
@@ -438,7 +438,7 @@ struct CommandList {
* not used.
*/
struct hpsa_scsi_dev_t *phys_disk;
- atomic_t refcount; /* Must be last to avoid memset in cmd_alloc */
+ atomic_t refcount; /* Must be last to avoid memset in hpsa_cmd_init() */
} __aligned(COMMANDLIST_ALIGNMENT);
/* Max S/G elements in I/O accelerator command */
^ permalink raw reply related [flat|nested] 58+ messages in thread* [PATCH 10/43] hpsa: do not ignore return value of hpsa_register_scsi
2015-02-21 22:17 [PATCH 00/43] hpsa updates Don Brace
` (8 preceding siblings ...)
2015-02-21 22:18 ` [PATCH 09/43] hpsa: factor out hpsa_init_cmd function Don Brace
@ 2015-02-21 22:18 ` Don Brace
2015-02-23 20:18 ` Christoph Hellwig
2015-02-21 22:18 ` [PATCH 11/43] hpsa: try resubmitting down raid path on task set full Don Brace
` (32 subsequent siblings)
42 siblings, 1 reply; 58+ messages in thread
From: Don Brace @ 2015-02-21 22:18 UTC (permalink / raw)
To: scott.teel, Kevin.Barnett, james.bottomley, hch, Justin.Lindley,
brace
Cc: linux-scsi
From: Stephen Cameron <stephenmcameron@gmail.com>
add error handling for failure when registering with SCSI subsystem.
Reviewed-by: Scott Teel <scott.teel@pmcs.com>
Reviewed-by: Kevin Barnett <kevin.barnett@pmcs.com>
Signed-off-by: Don Brace <don.brace@pmcs.com>
---
drivers/scsi/hpsa.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index 361937a..d163440 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -7469,7 +7469,8 @@ reinit_after_soft_reset:
h->access.set_intr_mask(h, HPSA_INTR_ON);
hpsa_hba_inquiry(h);
- hpsa_register_scsi(h); /* hook ourselves into SCSI subsystem */
+ if (hpsa_register_scsi(h)) /* hook ourselves into SCSI subsystem */
+ goto clean4;
/* Monitor the controller for firmware lockups */
h->heartbeat_sample_interval = HEARTBEAT_SAMPLE_INTERVAL;
^ permalink raw reply related [flat|nested] 58+ messages in thread* Re: [PATCH 10/43] hpsa: do not ignore return value of hpsa_register_scsi
2015-02-21 22:18 ` [PATCH 10/43] hpsa: do not ignore return value of hpsa_register_scsi Don Brace
@ 2015-02-23 20:18 ` Christoph Hellwig
0 siblings, 0 replies; 58+ messages in thread
From: Christoph Hellwig @ 2015-02-23 20:18 UTC (permalink / raw)
To: Don Brace
Cc: scott.teel, Kevin.Barnett, james.bottomley, hch, Justin.Lindley,
brace, linux-scsi
On Sat, Feb 21, 2015 at 04:18:26PM -0600, Don Brace wrote:
> + if (hpsa_register_scsi(h)) /* hook ourselves into SCSI subsystem */
> + goto clean4;
Shouldn't we propagate the exact error code returned?
^ permalink raw reply [flat|nested] 58+ messages in thread
* [PATCH 11/43] hpsa: try resubmitting down raid path on task set full
2015-02-21 22:17 [PATCH 00/43] hpsa updates Don Brace
` (9 preceding siblings ...)
2015-02-21 22:18 ` [PATCH 10/43] hpsa: do not ignore return value of hpsa_register_scsi Don Brace
@ 2015-02-21 22:18 ` Don Brace
2015-02-21 22:18 ` [PATCH 12/43] hpsa: factor out hpsa_ioaccel_submit function Don Brace
` (31 subsequent siblings)
42 siblings, 0 replies; 58+ messages in thread
From: Don Brace @ 2015-02-21 22:18 UTC (permalink / raw)
To: scott.teel, Kevin.Barnett, james.bottomley, hch, Justin.Lindley,
brace
Cc: linux-scsi
From: Stephen Cameron <stephenmcameron@gmail.com>
allow the controller firmware to queue up commands when the ioaccel device
queue is full.
Reviewed-by: Scott Teel <scott.teel@pmcs.com>
Reviewed-by: Kevin Barnett <kevin.barnett@pmcs.com>
Signed-off-by: Don Brace <don.brace@pmcs.com>
---
drivers/scsi/hpsa.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index d163440..5f19cff 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -1875,8 +1875,7 @@ static int handle_ioaccel_mode2_error(struct ctlr_info *h,
retry = 1;
break;
case IOACCEL2_STATUS_SR_TASK_COMP_SET_FULL:
- /* Make scsi midlayer do unlimited retries */
- cmd->result = DID_IMM_RETRY << 16;
+ retry = 1;
break;
case IOACCEL2_STATUS_SR_TASK_COMP_ABORTED:
dev_warn(&h->pdev->dev,
^ permalink raw reply related [flat|nested] 58+ messages in thread* [PATCH 12/43] hpsa: factor out hpsa_ioaccel_submit function
2015-02-21 22:17 [PATCH 00/43] hpsa updates Don Brace
` (10 preceding siblings ...)
2015-02-21 22:18 ` [PATCH 11/43] hpsa: try resubmitting down raid path on task set full Don Brace
@ 2015-02-21 22:18 ` Don Brace
2015-02-21 22:18 ` [PATCH 13/43] hpsa: print accurate SSD Smart Path Enabled status Don Brace
` (30 subsequent siblings)
42 siblings, 0 replies; 58+ messages in thread
From: Don Brace @ 2015-02-21 22:18 UTC (permalink / raw)
To: scott.teel, Kevin.Barnett, james.bottomley, hch, Justin.Lindley,
brace
Cc: linux-scsi
From: Webb Scales <webbnh@hp.com>
clean up command submission
Reviewed-by: Scott Teel <scott.teel@pmcs.com>
Reviewed-by: Kevin Barnett <kevin.barnett@pmcs.com>
Signed-off-by: Webb Scales <webbnh@hp.com>
Signed-off-by: Don Brace <don.brace@pmcs.com>
---
drivers/scsi/hpsa.c | 91 +++++++++++++++++++++++++++++++++++++--------------
1 file changed, 66 insertions(+), 25 deletions(-)
diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index 5f19cff..accfede 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -4428,6 +4428,33 @@ static inline void hpsa_cmd_partial_init(struct ctlr_info *h, int index,
c->busaddr = (u32) cmd_dma_handle;
}
+static int hpsa_ioaccel_submit(struct ctlr_info *h,
+ struct CommandList *c, struct scsi_cmnd *cmd,
+ unsigned char *scsi3addr)
+{
+ struct hpsa_scsi_dev_t *dev = cmd->device->hostdata;
+ int rc = IO_ACCEL_INELIGIBLE;
+
+ cmd->host_scribble = (unsigned char *) c;
+
+ if (dev->offload_enabled) {
+ hpsa_cmd_init(h, c->cmdindex, c);
+ c->cmd_type = CMD_SCSI;
+ c->scsi_cmd = cmd;
+ rc = hpsa_scsi_ioaccel_raid_map(h, c);
+ if (rc < 0) /* scsi_dma_map failed. */
+ rc = SCSI_MLQUEUE_HOST_BUSY;
+ } else if (dev->ioaccel_handle) {
+ hpsa_cmd_init(h, c->cmdindex, c);
+ c->cmd_type = CMD_SCSI;
+ c->scsi_cmd = cmd;
+ rc = hpsa_scsi_ioaccel_direct_map(h, c);
+ if (rc < 0) /* scsi_dma_map failed. */
+ rc = SCSI_MLQUEUE_HOST_BUSY;
+ }
+ return rc;
+}
+
static void hpsa_command_resubmit_worker(struct work_struct *work)
{
struct scsi_cmnd *cmd;
@@ -4439,15 +4466,46 @@ static void hpsa_command_resubmit_worker(struct work_struct *work)
dev = cmd->device->hostdata;
if (!dev) {
cmd->result = DID_NO_CONNECT << 16;
+ cmd_free(c->h, c);
cmd->scsi_done(cmd);
return;
}
+ if (c->cmd_type == CMD_IOACCEL2) {
+ struct ctlr_info *h = c->h;
+ struct io_accel2_cmd *c2 = &h->ioaccel2_cmd_pool[c->cmdindex];
+ int rc;
+
+ if (c2->error_data.serv_response ==
+ IOACCEL2_STATUS_SR_TASK_COMP_SET_FULL) {
+ rc = hpsa_ioaccel_submit(h, c, cmd, dev->scsi3addr);
+ if (rc == 0)
+ return;
+ if (rc == SCSI_MLQUEUE_HOST_BUSY) {
+ /*
+ * If we get here, it means dma mapping failed.
+ * Try again via scsi mid layer, which will
+ * then get SCSI_MLQUEUE_HOST_BUSY.
+ */
+ cmd->result = DID_IMM_RETRY << 16;
+ cmd->scsi_done(cmd);
+ cmd_free(h, c); /* FIX-ME: on merge, change
+ * to cmd_tagged_free() and
+ * ultimately to
+ * hpsa_cmd_free_and_done(). */
+ return;
+ }
+ /* else, fall thru and resubmit down CISS path */
+ }
+ }
hpsa_cmd_partial_init(c->h, c->cmdindex, c);
if (hpsa_ciss_submit(c->h, c, cmd, dev->scsi3addr)) {
/*
* If we get here, it means dma mapping failed. Try
* again via scsi mid layer, which will then get
* SCSI_MLQUEUE_HOST_BUSY.
+ *
+ * hpsa_ciss_submit will have already freed c
+ * if it encountered a dma mapping failure.
*/
cmd->result = DID_IMM_RETRY << 16;
cmd->scsi_done(cmd);
@@ -4497,31 +4555,14 @@ static int hpsa_scsi_queue_command(struct Scsi_Host *sh, struct scsi_cmnd *cmd)
if (likely(cmd->retries == 0 &&
cmd->request->cmd_type == REQ_TYPE_FS &&
h->acciopath_status)) {
-
- cmd->host_scribble = (unsigned char *) c;
-
- if (dev->offload_enabled) {
- hpsa_cmd_init(h, c->cmdindex, c);
- c->cmd_type = CMD_SCSI;
- c->scsi_cmd = cmd;
- rc = hpsa_scsi_ioaccel_raid_map(h, c);
- if (rc == 0)
- return 0; /* Sent on ioaccel path */
- if (rc < 0) { /* scsi_dma_map failed. */
- cmd_free(h, c);
- return SCSI_MLQUEUE_HOST_BUSY;
- }
- } else if (dev->ioaccel_handle) {
- hpsa_cmd_init(h, c->cmdindex, c);
- c->cmd_type = CMD_SCSI;
- c->scsi_cmd = cmd;
- rc = hpsa_scsi_ioaccel_direct_map(h, c);
- if (rc == 0)
- return 0; /* Sent on direct map path */
- if (rc < 0) { /* scsi_dma_map failed. */
- cmd_free(h, c);
- return SCSI_MLQUEUE_HOST_BUSY;
- }
+ rc = hpsa_ioaccel_submit(h, c, cmd, scsi3addr);
+ if (rc == 0)
+ return 0;
+ if (rc == SCSI_MLQUEUE_HOST_BUSY) {
+ cmd_free(h, c); /* FIX-ME: on merge, change to
+ * cmd_tagged_free(), and ultimately
+ * to hpsa_cmd_resolve_and_free(). */
+ return SCSI_MLQUEUE_HOST_BUSY;
}
}
return hpsa_ciss_submit(h, c, cmd, scsi3addr);
^ permalink raw reply related [flat|nested] 58+ messages in thread* [PATCH 13/43] hpsa: print accurate SSD Smart Path Enabled status
2015-02-21 22:17 [PATCH 00/43] hpsa updates Don Brace
` (11 preceding siblings ...)
2015-02-21 22:18 ` [PATCH 12/43] hpsa: factor out hpsa_ioaccel_submit function Don Brace
@ 2015-02-21 22:18 ` Don Brace
2015-02-21 22:18 ` [PATCH 14/43] hpsa: use ioaccel2 path to submit IOs to physical drives in HBA mode Don Brace
` (29 subsequent siblings)
42 siblings, 0 replies; 58+ messages in thread
From: Don Brace @ 2015-02-21 22:18 UTC (permalink / raw)
To: scott.teel, Kevin.Barnett, james.bottomley, hch, Justin.Lindley,
brace
Cc: linux-scsi
From: Robert Elliott <elliott@hp.com>
offload_enabled changes are deferred until after the
added/updated prints occur, so the values are incorrect.
defer printing SSD Smart Path Enabled status information until the
information is correct
Reviewed-by: Scott Teel <scott.teel@pmcs.com>
Reviewed-by: Kevin Barnett <kevin.barnett@pmcs.com>
Signed-off-by: Robert Elliott <elliott@hp.com>
Signed-off-by: Don Brace <don.brace@pmcs.com>
---
drivers/scsi/hpsa.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index accfede..e151662 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -1065,7 +1065,7 @@ lun_assigned:
device->raid_level > RAID_UNKNOWN ?
"RAID-?" : raid_label[device->raid_level],
device->offload_config ? '+' : '-',
- device->offload_enabled ? '+' : '-',
+ device->offload_to_be_enabled ? '+' : '-',
device->expose_state);
return 0;
}
@@ -1116,7 +1116,7 @@ static void hpsa_scsi_update_entry(struct ctlr_info *h, int hostno,
h->dev[entry]->raid_level > RAID_UNKNOWN ?
"RAID-?" : raid_label[h->dev[entry]->raid_level],
h->dev[entry]->offload_config ? '+' : '-',
- h->dev[entry]->offload_enabled ? '+' : '-',
+ h->dev[entry]->offload_to_be_enabled ? '+' : '-',
h->dev[entry]->expose_state);
}
@@ -1154,7 +1154,7 @@ static void hpsa_scsi_replace_entry(struct ctlr_info *h, int hostno,
new_entry->raid_level > RAID_UNKNOWN ?
"RAID-?" : raid_label[new_entry->raid_level],
new_entry->offload_config ? '+' : '-',
- new_entry->offload_enabled ? '+' : '-',
+ new_entry->offload_to_be_enabled ? '+' : '-',
new_entry->expose_state);
}
^ permalink raw reply related [flat|nested] 58+ messages in thread* [PATCH 14/43] hpsa: use ioaccel2 path to submit IOs to physical drives in HBA mode.
2015-02-21 22:17 [PATCH 00/43] hpsa updates Don Brace
` (12 preceding siblings ...)
2015-02-21 22:18 ` [PATCH 13/43] hpsa: print accurate SSD Smart Path Enabled status Don Brace
@ 2015-02-21 22:18 ` Don Brace
2015-02-21 22:18 ` [PATCH 15/43] hpsa: Get queue depth from identify physical bmic for physical disks Don Brace
` (28 subsequent siblings)
42 siblings, 0 replies; 58+ messages in thread
From: Don Brace @ 2015-02-21 22:18 UTC (permalink / raw)
To: scott.teel, Kevin.Barnett, james.bottomley, hch, Justin.Lindley,
brace
Cc: linux-scsi
From: Joe Handzik <joseph.t.handzik@hp.com>
use ioaccel2 path to submit I/O to physical drives in HBA mode
Reviewed-by: Scott Teel <scott.teel@pmcs.com>
Reviewed-by: Kevin Barnett <kevin.barnett@pmcs.com>
Signed-off-by: Joe Handzik <joseph.t.handzik@hp.com>
Signed-off-by: Don Brace <don.brace@pmcs.com>
---
drivers/scsi/hpsa.c | 10 +++++++++-
drivers/scsi/hpsa.h | 1 +
2 files changed, 10 insertions(+), 1 deletion(-)
diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index e151662..0b3499c 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -1093,6 +1093,11 @@ static void hpsa_scsi_update_entry(struct ctlr_info *h, int hostno,
h->dev[entry]->raid_map = new_entry->raid_map;
h->dev[entry]->ioaccel_handle = new_entry->ioaccel_handle;
}
+ if (new_entry->hba_ioaccel_enabled) {
+ h->dev[entry]->ioaccel_handle = new_entry->ioaccel_handle;
+ wmb(); /* set ioaccel_handle *before* hba_ioaccel_enabled */
+ }
+ h->dev[entry]->hba_ioaccel_enabled = new_entry->hba_ioaccel_enabled;
h->dev[entry]->offload_config = new_entry->offload_config;
h->dev[entry]->offload_to_mirror = new_entry->offload_to_mirror;
h->dev[entry]->queue_depth = new_entry->queue_depth;
@@ -3055,6 +3060,7 @@ static int hpsa_update_device_info(struct ctlr_info *h,
this_device->offload_config = 0;
this_device->offload_enabled = 0;
this_device->offload_to_be_enabled = 0;
+ this_device->hba_ioaccel_enabled = 0;
this_device->volume_offline = 0;
this_device->queue_depth = h->nr_cmds;
}
@@ -3343,6 +3349,8 @@ static void hpsa_get_ioaccel_drive_info(struct ctlr_info *h,
(struct ext_report_lun_entry *) lunaddrbytes;
dev->ioaccel_handle = rle->ioaccel_handle;
+ if (PHYS_IOACCEL(lunaddrbytes) && dev->ioaccel_handle)
+ dev->hba_ioaccel_enabled = 1;
memset(id_phys, 0, sizeof(*id_phys));
rc = hpsa_bmic_id_physical_device(h, lunaddrbytes,
GET_BMIC_DRIVE_NUMBER(lunaddrbytes), id_phys,
@@ -4444,7 +4452,7 @@ static int hpsa_ioaccel_submit(struct ctlr_info *h,
rc = hpsa_scsi_ioaccel_raid_map(h, c);
if (rc < 0) /* scsi_dma_map failed. */
rc = SCSI_MLQUEUE_HOST_BUSY;
- } else if (dev->ioaccel_handle) {
+ } else if (dev->hba_ioaccel_enabled) {
hpsa_cmd_init(h, c->cmdindex, c);
c->cmd_type = CMD_SCSI;
c->scsi_cmd = cmd;
diff --git a/drivers/scsi/hpsa.h b/drivers/scsi/hpsa.h
index df2468c..87a70b5 100644
--- a/drivers/scsi/hpsa.h
+++ b/drivers/scsi/hpsa.h
@@ -55,6 +55,7 @@ struct hpsa_scsi_dev_t {
int offload_config; /* I/O accel RAID offload configured */
int offload_enabled; /* I/O accel RAID offload enabled */
int offload_to_be_enabled;
+ int hba_ioaccel_enabled;
int offload_to_mirror; /* Send next I/O accelerator RAID
* offload request to mirror drive
*/
^ permalink raw reply related [flat|nested] 58+ messages in thread* [PATCH 15/43] hpsa: Get queue depth from identify physical bmic for physical disks.
2015-02-21 22:17 [PATCH 00/43] hpsa updates Don Brace
` (13 preceding siblings ...)
2015-02-21 22:18 ` [PATCH 14/43] hpsa: use ioaccel2 path to submit IOs to physical drives in HBA mode Don Brace
@ 2015-02-21 22:18 ` Don Brace
2015-02-21 22:18 ` [PATCH 16/43] hpsa: break hpsa_free_irqs_and_disable_msix into two functions Don Brace
` (27 subsequent siblings)
42 siblings, 0 replies; 58+ messages in thread
From: Don Brace @ 2015-02-21 22:18 UTC (permalink / raw)
To: scott.teel, Kevin.Barnett, james.bottomley, hch, Justin.Lindley,
brace
Cc: linux-scsi
From: Joe Handzik <joseph.t.handzik@hp.com>
get drive queue depth to help avoid task set full conditions.
Reviewed-by: Scott Teel <scott.teel@pmcs.com>
Reviewed-by: Kevin Barnett <kevin.barnett@pmcs.com>
Signed-off-by: Joe Handzik <joseph.t.handzik@hp.com>
Signed-off-by: Don Brace <don.brace@pmcs.com>
---
drivers/scsi/hpsa.c | 31 ++++++++++++-------------------
1 file changed, 12 insertions(+), 19 deletions(-)
diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index 0b3499c..22e7914 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -3513,29 +3513,22 @@ static void hpsa_update_scsi_devices(struct ctlr_info *h, int hostno)
ncurrent++;
break;
case TYPE_DISK:
- if (h->hba_mode_enabled) {
- /* never use raid mapper in HBA mode */
- this_device->offload_enabled = 0;
- ncurrent++;
- break;
- } else if (h->acciopath_status) {
- if (i >= nphysicals) {
- ncurrent++;
- break;
- }
- } else {
- if (i < nphysicals)
- break;
+ if (i >= nphysicals) {
ncurrent++;
break;
}
- if (h->transMethod & CFGTBL_Trans_io_accel1 ||
- h->transMethod & CFGTBL_Trans_io_accel2) {
- hpsa_get_ioaccel_drive_info(h, this_device,
- lunaddrbytes, id_phys);
+
+ if (h->hba_mode_enabled)
+ /* never use raid mapper in HBA mode */
+ this_device->offload_enabled = 0;
+ else if (!(h->transMethod & CFGTBL_Trans_io_accel1 ||
+ h->transMethod & CFGTBL_Trans_io_accel2))
+ break;
+
+ hpsa_get_ioaccel_drive_info(h, this_device,
+ lunaddrbytes, id_phys);
atomic_set(&this_device->ioaccel_cmds_out, 0);
- ncurrent++;
- }
+ ncurrent++;
break;
case TYPE_TAPE:
case TYPE_MEDIUM_CHANGER:
^ permalink raw reply related [flat|nested] 58+ messages in thread* [PATCH 16/43] hpsa: break hpsa_free_irqs_and_disable_msix into two functions
2015-02-21 22:17 [PATCH 00/43] hpsa updates Don Brace
` (14 preceding siblings ...)
2015-02-21 22:18 ` [PATCH 15/43] hpsa: Get queue depth from identify physical bmic for physical disks Don Brace
@ 2015-02-21 22:18 ` Don Brace
2015-02-21 22:19 ` [PATCH 17/43] hpsa: clean up error handling Don Brace
` (26 subsequent siblings)
42 siblings, 0 replies; 58+ messages in thread
From: Don Brace @ 2015-02-21 22:18 UTC (permalink / raw)
To: scott.teel, Kevin.Barnett, james.bottomley, hch, Justin.Lindley,
brace
Cc: linux-scsi
From: Robert Elliott <elliott@hp.com>
replace calls to hpsa_free_irqs_and_disable_msix with
hpsa_free_irqs and hpsa_disable_interrupt_mode
Reviewed-by: Scott Teel <scott.teel@pmcs.com>
Reviewed-by: Kevin Barnett <kevin.barnett@pmcs.com>
Signed-off-by: Robert Elliott <elliott@hp.com>
Signed-off-by: Don Brace <don.brace@pmcs.com>
---
drivers/scsi/hpsa.c | 37 ++++++++++++++++++++-----------------
1 file changed, 20 insertions(+), 17 deletions(-)
diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index 22e7914..94146c6 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -6414,10 +6414,22 @@ static int find_PCI_BAR_index(struct pci_dev *pdev, unsigned long pci_bar_addr)
return -1;
}
+static void hpsa_disable_interrupt_mode(struct ctlr_info *h)
+{
+#ifdef CONFIG_PCI_MSI
+ if (h->msix_vector) {
+ if (h->pdev->msix_enabled)
+ pci_disable_msix(h->pdev);
+ } else if (h->msi_vector) {
+ if (h->pdev->msi_enabled)
+ pci_disable_msi(h->pdev);
+ }
+#endif /* CONFIG_PCI_MSI */
+}
+
/* If MSI/MSI-X is supported by the kernel we will try to enable it on
* controllers that are capable. If not, we use legacy INTx mode.
*/
-
static void hpsa_interrupt_mode(struct ctlr_info *h)
{
#ifdef CONFIG_PCI_MSI
@@ -7058,20 +7070,6 @@ static int hpsa_kdump_soft_reset(struct ctlr_info *h)
return 0;
}
-static void hpsa_free_irqs_and_disable_msix(struct ctlr_info *h)
-{
- hpsa_free_irqs(h);
-#ifdef CONFIG_PCI_MSI
- if (h->msix_vector) {
- if (h->pdev->msix_enabled)
- pci_disable_msix(h->pdev);
- } else if (h->msi_vector) {
- if (h->pdev->msi_enabled)
- pci_disable_msi(h->pdev);
- }
-#endif /* CONFIG_PCI_MSI */
-}
-
static void hpsa_free_reply_queues(struct ctlr_info *h)
{
int i;
@@ -7088,7 +7086,7 @@ static void hpsa_free_reply_queues(struct ctlr_info *h)
static void hpsa_undo_allocations_after_kdump_soft_reset(struct ctlr_info *h)
{
- hpsa_free_irqs_and_disable_msix(h);
+ hpsa_free_irqs(h);
hpsa_free_sg_chain_blocks(h);
hpsa_free_cmd_pool(h);
kfree(h->ioaccel1_blockFetchTable);
@@ -7100,6 +7098,7 @@ static void hpsa_undo_allocations_after_kdump_soft_reset(struct ctlr_info *h)
iounmap(h->transtable);
if (h->cfgtable)
iounmap(h->cfgtable);
+ hpsa_disable_interrupt_mode(h);
pci_disable_device(h->pdev);
pci_release_regions(h->pdev);
kfree(h);
@@ -7587,7 +7586,8 @@ static void hpsa_shutdown(struct pci_dev *pdev)
*/
hpsa_flush_cache(h);
h->access.set_intr_mask(h, HPSA_INTR_OFF);
- hpsa_free_irqs_and_disable_msix(h);
+ hpsa_free_irqs(h);
+ hpsa_disable_interrupt_mode(h); /* pci_init 2 */
}
static void hpsa_free_device_info(struct ctlr_info *h)
@@ -7618,7 +7618,10 @@ static void hpsa_remove_one(struct pci_dev *pdev)
destroy_workqueue(h->rescan_ctlr_wq);
destroy_workqueue(h->resubmit_wq);
hpsa_unregister_scsi(h); /* unhook from SCSI subsystem */
+
+ /* includes hpsa_free_irqs and hpsa_disable_interrupt_mode */
hpsa_shutdown(pdev);
+
iounmap(h->vaddr);
iounmap(h->transtable);
iounmap(h->cfgtable);
^ permalink raw reply related [flat|nested] 58+ messages in thread* [PATCH 17/43] hpsa: clean up error handling
2015-02-21 22:17 [PATCH 00/43] hpsa updates Don Brace
` (15 preceding siblings ...)
2015-02-21 22:18 ` [PATCH 16/43] hpsa: break hpsa_free_irqs_and_disable_msix into two functions Don Brace
@ 2015-02-21 22:19 ` Don Brace
2015-02-21 22:19 ` [PATCH 18/43] hpsa: refactor freeing of resources into more logical functions Don Brace
` (25 subsequent siblings)
42 siblings, 0 replies; 58+ messages in thread
From: Don Brace @ 2015-02-21 22:19 UTC (permalink / raw)
To: scott.teel, Kevin.Barnett, james.bottomley, hch, Justin.Lindley,
brace
Cc: linux-scsi
From: Robert Elliott <elliott@hp.com>
refactor error cleanup and shutdown
disable interrupts and pci_disable_device on critical failures
add hpsa_free_cfgtables function
Reviewed-by: Scott Teel <scott.teel@pmcs.com>
Reviewed-by: Kevin Barnett <kevin.barnett@pmcs.com>
Signed-off-by: Robert Elliott <elliott@hp.com>
Signed-off-by: Don Brace <don.brace@pmcs.com>
---
drivers/scsi/hpsa.c | 92 ++++++++++++++++++++++++++++++++-------------------
1 file changed, 58 insertions(+), 34 deletions(-)
diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index 94146c6..21e3610 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -6560,6 +6560,17 @@ static int hpsa_find_cfg_addrs(struct pci_dev *pdev, void __iomem *vaddr,
return 0;
}
+static void hpsa_free_cfgtables(struct ctlr_info *h)
+{
+ if (h->transtable)
+ iounmap(h->transtable);
+ if (h->cfgtable)
+ iounmap(h->cfgtable);
+}
+
+/* Find and map CISS config table and transfer table
++ * several items must be unmapped (freed) later
++ * */
static int hpsa_find_cfgtables(struct ctlr_info *h)
{
u64 cfg_offset;
@@ -6586,8 +6597,11 @@ static int hpsa_find_cfgtables(struct ctlr_info *h)
h->transtable = remap_pci_mem(pci_resource_start(h->pdev,
cfg_base_addr_index)+cfg_offset+trans_offset,
sizeof(*h->transtable));
- if (!h->transtable)
+ if (!h->transtable) {
+ dev_err(&h->pdev->dev, "Failed mapping transfer table\n");
+ hpsa_free_cfgtables(h);
return -ENOMEM;
+ }
return 0;
}
@@ -6763,6 +6777,17 @@ error:
return -ENODEV;
}
+/* free items allocated or mapped by hpsa_pci_init */
+static void hpsa_free_pci_init(struct ctlr_info *h)
+{
+ hpsa_free_cfgtables(h); /* pci_init 4 */
+ iounmap(h->vaddr); /* pci_init 3 */
+ hpsa_disable_interrupt_mode(h); /* pci_init 2 */
+ pci_release_regions(h->pdev); /* pci_init 2 */
+ pci_disable_device(h->pdev); /* pci_init 1 */
+}
+
+/* several items must be freed later */
static int hpsa_pci_init(struct ctlr_info *h)
{
int prod_index, err;
@@ -6781,15 +6806,15 @@ static int hpsa_pci_init(struct ctlr_info *h)
err = pci_enable_device(h->pdev);
if (err) {
- dev_warn(&h->pdev->dev, "unable to enable PCI device\n");
+ dev_err(&h->pdev->dev, "failed to enable PCI device\n");
return err;
}
err = pci_request_regions(h->pdev, HPSA);
if (err) {
dev_err(&h->pdev->dev,
- "cannot obtain PCI resources, aborting\n");
- return err;
+ "failed to obtain PCI resources\n");
+ goto clean1; /* pci */
}
pci_set_master(h->pdev);
@@ -6797,40 +6822,41 @@ static int hpsa_pci_init(struct ctlr_info *h)
hpsa_interrupt_mode(h);
err = hpsa_pci_find_memory_BAR(h->pdev, &h->paddr);
if (err)
- goto err_out_free_res;
+ goto clean2; /* intmode+region, pci */
h->vaddr = remap_pci_mem(h->paddr, 0x250);
if (!h->vaddr) {
+ dev_err(&h->pdev->dev, "failed to remap PCI mem\n");
err = -ENOMEM;
- goto err_out_free_res;
+ goto clean2; /* intmode+region, pci */
}
err = hpsa_wait_for_board_state(h->pdev, h->vaddr, BOARD_READY);
if (err)
- goto err_out_free_res;
+ goto clean3; /* vaddr, intmode+region, pci */
err = hpsa_find_cfgtables(h);
if (err)
- goto err_out_free_res;
+ goto clean3; /* vaddr, intmode+region, pci */
hpsa_find_board_params(h);
if (!hpsa_CISS_signature_present(h)) {
err = -ENODEV;
- goto err_out_free_res;
+ goto clean4; /* cfgtables, vaddr, intmode+region, pci */
}
hpsa_set_driver_support_bits(h);
hpsa_p600_dma_prefetch_quirk(h);
err = hpsa_enter_simple_mode(h);
if (err)
- goto err_out_free_res;
+ goto clean4; /* cfgtables, vaddr, intmode+region, pci */
return 0;
-err_out_free_res:
- if (h->transtable)
- iounmap(h->transtable);
- if (h->cfgtable)
- iounmap(h->cfgtable);
- if (h->vaddr)
- iounmap(h->vaddr);
- pci_disable_device(h->pdev);
+clean4: /* cfgtables, vaddr, intmode+region, pci */
+ hpsa_free_cfgtables(h);
+clean3: /* vaddr, intmode+region, pci */
+ iounmap(h->vaddr);
+clean2: /* intmode+region, pci */
+ hpsa_disable_interrupt_mode(h);
pci_release_regions(h->pdev);
+clean1: /* pci */
+ pci_disable_device(h->pdev);
return err;
}
@@ -7039,8 +7065,9 @@ static int hpsa_request_irqs(struct ctlr_info *h,
}
}
if (rc) {
- dev_err(&h->pdev->dev, "unable to get irq %d for %s\n",
+ dev_err(&h->pdev->dev, "failed to get irq %d for %s\n",
h->intr[h->intr_mode], h->devname);
+ hpsa_free_irqs(h);
return -ENODEV;
}
return 0;
@@ -7092,15 +7119,11 @@ static void hpsa_undo_allocations_after_kdump_soft_reset(struct ctlr_info *h)
kfree(h->ioaccel1_blockFetchTable);
kfree(h->blockFetchTable);
hpsa_free_reply_queues(h);
- if (h->vaddr)
- iounmap(h->vaddr);
- if (h->transtable)
- iounmap(h->transtable);
- if (h->cfgtable)
- iounmap(h->cfgtable);
- hpsa_disable_interrupt_mode(h);
+ hpsa_free_cfgtables(h); /* pci_init 4 */
+ iounmap(h->vaddr); /* pci_init 3 */
+ hpsa_disable_interrupt_mode(h); /* pci_init 2 */
pci_disable_device(h->pdev);
- pci_release_regions(h->pdev);
+ pci_release_regions(h->pdev); /* pci_init 2 */
kfree(h);
}
@@ -7418,7 +7441,7 @@ reinit_after_soft_reset:
dac = 0;
} else {
dev_err(&pdev->dev, "no suitable DMA available\n");
- goto clean1;
+ goto clean2;
}
}
@@ -7528,6 +7551,7 @@ clean4:
clean2_and_free_irqs:
hpsa_free_irqs(h);
clean2:
+ hpsa_free_pci_init(h);
clean1:
if (h->resubmit_wq)
destroy_workqueue(h->resubmit_wq);
@@ -7619,12 +7643,10 @@ static void hpsa_remove_one(struct pci_dev *pdev)
destroy_workqueue(h->resubmit_wq);
hpsa_unregister_scsi(h); /* unhook from SCSI subsystem */
- /* includes hpsa_free_irqs and hpsa_disable_interrupt_mode */
+ /* includes hpsa_free_irqs */
+ /* includes hpsa_disable_interrupt_mode - pci_init 2 */
hpsa_shutdown(pdev);
- iounmap(h->vaddr);
- iounmap(h->transtable);
- iounmap(h->cfgtable);
hpsa_free_device_info(h);
hpsa_free_sg_chain_blocks(h);
pci_free_consistent(h->pdev,
@@ -7639,8 +7661,10 @@ static void hpsa_remove_one(struct pci_dev *pdev)
kfree(h->ioaccel1_blockFetchTable);
kfree(h->ioaccel2_blockFetchTable);
kfree(h->hba_inquiry_data);
- pci_disable_device(pdev);
- pci_release_regions(pdev);
+
+ /* includes hpsa_disable_interrupt_mode - pci_init 2 */
+ hpsa_free_pci_init(h);
+
free_percpu(h->lockup_detected);
kfree(h);
}
^ permalink raw reply related [flat|nested] 58+ messages in thread* [PATCH 18/43] hpsa: refactor freeing of resources into more logical functions
2015-02-21 22:17 [PATCH 00/43] hpsa updates Don Brace
` (16 preceding siblings ...)
2015-02-21 22:19 ` [PATCH 17/43] hpsa: clean up error handling Don Brace
@ 2015-02-21 22:19 ` Don Brace
2015-02-21 22:19 ` [PATCH 19/43] hpsa: add ioaccel sg chaining for the ioaccel2 path Don Brace
` (24 subsequent siblings)
42 siblings, 0 replies; 58+ messages in thread
From: Don Brace @ 2015-02-21 22:19 UTC (permalink / raw)
To: scott.teel, Kevin.Barnett, james.bottomley, hch, Justin.Lindley,
brace
Cc: linux-scsi
From: Robert Elliott <elliott@hp.com>
refactor freeing of resources into more logical functions
Reviewed-by: Scott Teel <scott.teel@pmcs.com>
Reviewed-by: Kevin Barnett <kevin.barnett@pmcs.com>
Signed-off-by: Robert Elliott <elliott@hp.com>
Signed-off-by: Don Brace <don.brace@pmcs.com>
---
drivers/scsi/hpsa.c | 104 +++++++++++++++++++++++++++------------------------
1 file changed, 56 insertions(+), 48 deletions(-)
diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index 21e3610..e61e4eb 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -234,6 +234,8 @@ static void check_ioctl_unit_attention(struct ctlr_info *h,
static void calc_bucket_map(int *bucket, int num_buckets,
int nsgs, int min_blocks, u32 *bucket_map);
static void hpsa_put_ctlr_into_performant_mode(struct ctlr_info *h);
+static void hpsa_free_ioaccel1_cmd_and_bft(struct ctlr_info *h);
+static void hpsa_free_ioaccel2_cmd_and_bft(struct ctlr_info *h);
static inline u32 next_command(struct ctlr_info *h, u8 q);
static int hpsa_find_cfg_addrs(struct pci_dev *pdev, void __iomem *vaddr,
u32 *cfg_base_addr, u64 *cfg_base_addr_index,
@@ -6938,6 +6940,21 @@ out_disable:
return rc;
}
+static void hpsa_free_cmd_pool(struct ctlr_info *h)
+{
+ kfree(h->cmd_pool_bits);
+ if (h->cmd_pool)
+ pci_free_consistent(h->pdev,
+ h->nr_cmds * sizeof(struct CommandList),
+ h->cmd_pool,
+ h->cmd_pool_dhandle);
+ if (h->errinfo_pool)
+ pci_free_consistent(h->pdev,
+ h->nr_cmds * sizeof(struct ErrorInfo),
+ h->errinfo_pool,
+ h->errinfo_pool_dhandle);
+}
+
static int hpsa_alloc_cmd_pool(struct ctlr_info *h)
{
h->cmd_pool_bits = kzalloc(
@@ -6962,28 +6979,6 @@ clean_up:
return -ENOMEM;
}
-static void hpsa_free_cmd_pool(struct ctlr_info *h)
-{
- kfree(h->cmd_pool_bits);
- if (h->cmd_pool)
- pci_free_consistent(h->pdev,
- h->nr_cmds * sizeof(struct CommandList),
- h->cmd_pool, h->cmd_pool_dhandle);
- if (h->ioaccel2_cmd_pool)
- pci_free_consistent(h->pdev,
- h->nr_cmds * sizeof(*h->ioaccel2_cmd_pool),
- h->ioaccel2_cmd_pool, h->ioaccel2_cmd_pool_dhandle);
- if (h->errinfo_pool)
- pci_free_consistent(h->pdev,
- h->nr_cmds * sizeof(struct ErrorInfo),
- h->errinfo_pool,
- h->errinfo_pool_dhandle);
- if (h->ioaccel_cmd_pool)
- pci_free_consistent(h->pdev,
- h->nr_cmds * sizeof(struct io_accel1_cmd),
- h->ioaccel_cmd_pool, h->ioaccel_cmd_pool_dhandle);
-}
-
static void hpsa_irq_affinity_hints(struct ctlr_info *h)
{
int i, cpu;
@@ -7104,8 +7099,10 @@ static void hpsa_free_reply_queues(struct ctlr_info *h)
for (i = 0; i < h->nreply_queues; i++) {
if (!h->reply_queue[i].head)
continue;
- pci_free_consistent(h->pdev, h->reply_queue_size,
- h->reply_queue[i].head, h->reply_queue[i].busaddr);
+ pci_free_consistent(h->pdev,
+ h->reply_queue_size,
+ h->reply_queue[i].head,
+ h->reply_queue[i].busaddr);
h->reply_queue[i].head = NULL;
h->reply_queue[i].busaddr = 0;
}
@@ -7116,9 +7113,10 @@ static void hpsa_undo_allocations_after_kdump_soft_reset(struct ctlr_info *h)
hpsa_free_irqs(h);
hpsa_free_sg_chain_blocks(h);
hpsa_free_cmd_pool(h);
- kfree(h->ioaccel1_blockFetchTable);
- kfree(h->blockFetchTable);
- hpsa_free_reply_queues(h);
+ kfree(h->blockFetchTable); /* perf 2 */
+ hpsa_free_reply_queues(h); /* perf 1 */
+ hpsa_free_ioaccel1_cmd_and_bft(h); /* perf 1 */
+ hpsa_free_ioaccel2_cmd_and_bft(h); /* perf 1 */
hpsa_free_cfgtables(h); /* pci_init 4 */
iounmap(h->vaddr); /* pci_init 3 */
hpsa_disable_interrupt_mode(h); /* pci_init 2 */
@@ -7548,6 +7546,8 @@ reinit_after_soft_reset:
clean4:
hpsa_free_sg_chain_blocks(h);
hpsa_free_cmd_pool(h);
+ hpsa_free_ioaccel1_cmd_and_bft(h);
+ hpsa_free_ioaccel2_cmd_and_bft(h);
clean2_and_free_irqs:
hpsa_free_irqs(h);
clean2:
@@ -7649,17 +7649,11 @@ static void hpsa_remove_one(struct pci_dev *pdev)
hpsa_free_device_info(h);
hpsa_free_sg_chain_blocks(h);
- pci_free_consistent(h->pdev,
- h->nr_cmds * sizeof(struct CommandList),
- h->cmd_pool, h->cmd_pool_dhandle);
- pci_free_consistent(h->pdev,
- h->nr_cmds * sizeof(struct ErrorInfo),
- h->errinfo_pool, h->errinfo_pool_dhandle);
- hpsa_free_reply_queues(h);
- kfree(h->cmd_pool_bits);
- kfree(h->blockFetchTable);
- kfree(h->ioaccel1_blockFetchTable);
- kfree(h->ioaccel2_blockFetchTable);
+ kfree(h->blockFetchTable); /* perf 2 */
+ hpsa_free_reply_queues(h); /* perf 1 */
+ hpsa_free_ioaccel1_cmd_and_bft(h); /* perf 1 */
+ hpsa_free_ioaccel2_cmd_and_bft(h); /* perf 1 */
+ hpsa_free_cmd_pool(h); /* init_one 5 */
kfree(h->hba_inquiry_data);
/* includes hpsa_disable_interrupt_mode - pci_init 2 */
@@ -7906,6 +7900,17 @@ static int hpsa_enter_performant_mode(struct ctlr_info *h, u32 trans_support)
return 0;
}
+/* Free ioaccel1 mode command blocks and block fetch table */
+static void hpsa_free_ioaccel1_cmd_and_bft(struct ctlr_info *h)
+{
+ if (h->ioaccel_cmd_pool)
+ pci_free_consistent(h->pdev,
+ h->nr_cmds * sizeof(*h->ioaccel_cmd_pool),
+ h->ioaccel_cmd_pool,
+ h->ioaccel_cmd_pool_dhandle);
+ kfree(h->ioaccel1_blockFetchTable);
+}
+
/* Allocate ioaccel1 mode command blocks and block fetch table */
static int hpsa_alloc_ioaccel1_cmd_and_bft(struct ctlr_info *h)
{
@@ -7938,14 +7943,21 @@ static int hpsa_alloc_ioaccel1_cmd_and_bft(struct ctlr_info *h)
return 0;
clean_up:
- if (h->ioaccel_cmd_pool)
- pci_free_consistent(h->pdev,
- h->nr_cmds * sizeof(*h->ioaccel_cmd_pool),
- h->ioaccel_cmd_pool, h->ioaccel_cmd_pool_dhandle);
- kfree(h->ioaccel1_blockFetchTable);
+ hpsa_free_ioaccel1_cmd_and_bft(h);
return 1;
}
+/* Free ioaccel2 mode command blocks and block fetch table */
+static void hpsa_free_ioaccel2_cmd_and_bft(struct ctlr_info *h)
+{
+ if (h->ioaccel2_cmd_pool)
+ pci_free_consistent(h->pdev,
+ h->nr_cmds * sizeof(*h->ioaccel2_cmd_pool),
+ h->ioaccel2_cmd_pool,
+ h->ioaccel2_cmd_pool_dhandle);
+ kfree(h->ioaccel2_blockFetchTable);
+}
+
/* Allocate ioaccel2 mode command blocks and block fetch table */
static int hpsa_alloc_ioaccel2_cmd_and_bft(struct ctlr_info *h)
{
@@ -7976,11 +7988,7 @@ static int hpsa_alloc_ioaccel2_cmd_and_bft(struct ctlr_info *h)
return 0;
clean_up:
- if (h->ioaccel2_cmd_pool)
- pci_free_consistent(h->pdev,
- h->nr_cmds * sizeof(*h->ioaccel2_cmd_pool),
- h->ioaccel2_cmd_pool, h->ioaccel2_cmd_pool_dhandle);
- kfree(h->ioaccel2_blockFetchTable);
+ hpsa_free_ioaccel2_cmd_and_bft(h);
return 1;
}
^ permalink raw reply related [flat|nested] 58+ messages in thread* [PATCH 19/43] hpsa: add ioaccel sg chaining for the ioaccel2 path
2015-02-21 22:17 [PATCH 00/43] hpsa updates Don Brace
` (17 preceding siblings ...)
2015-02-21 22:19 ` [PATCH 18/43] hpsa: refactor freeing of resources into more logical functions Don Brace
@ 2015-02-21 22:19 ` Don Brace
2015-02-21 22:19 ` [PATCH 20/43] hpsa: add more ioaccel2 error handling, including underrun statuses Don Brace
` (23 subsequent siblings)
42 siblings, 0 replies; 58+ messages in thread
From: Don Brace @ 2015-02-21 22:19 UTC (permalink / raw)
To: scott.teel, Kevin.Barnett, james.bottomley, hch, Justin.Lindley,
brace
Cc: linux-scsi
From: Webb Scales <webbnh@hp.com>
Increase the request size for ioaccel2 path.
The error, if any, returned by hpsa_allocate_ioaccel2_sg_chain_blocks
to hpsa_alloc_ioaccel2_cmd_and_bft should be returned upstream rather
than assumed to be -ENOMEM.
This differs slightly from hpsa_alloc_ioaccel1_cmd_and_bft,
which does not call another hpsa_allocate function and only
has -ENOMEM to return from some kmalloc calls.
Reviewed-by: Scott Teel <scott.teel@pmcs.com>
Reviewed-by: Kevin Barnett <kevin.barnett@pmcs.com>
Signed-off-by: Robert Elliott <elliott@hp.com>
Signed-off-by: Don Brace <don.brace@pmcs.com>
---
drivers/scsi/hpsa.c | 125 +++++++++++++++++++++++++++++++++++++++++++++++----
drivers/scsi/hpsa.h | 1
2 files changed, 116 insertions(+), 10 deletions(-)
diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index e61e4eb..9cf7ed7 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -1750,6 +1750,46 @@ static void hpsa_slave_destroy(struct scsi_device *sdev)
/* nothing to do. */
}
+static void hpsa_free_ioaccel2_sg_chain_blocks(struct ctlr_info *h)
+{
+ int i;
+
+ if (!h->ioaccel2_cmd_sg_list)
+ return;
+ for (i = 0; i < h->nr_cmds; i++) {
+ kfree(h->ioaccel2_cmd_sg_list[i]);
+ h->ioaccel2_cmd_sg_list[i] = NULL;
+ }
+ kfree(h->ioaccel2_cmd_sg_list);
+ h->ioaccel2_cmd_sg_list = NULL;
+}
+
+static int hpsa_allocate_ioaccel2_sg_chain_blocks(struct ctlr_info *h)
+{
+ int i;
+
+ if (h->chainsize <= 0)
+ return 0;
+
+ h->ioaccel2_cmd_sg_list =
+ kzalloc(sizeof(*h->ioaccel2_cmd_sg_list) * h->nr_cmds,
+ GFP_KERNEL);
+ if (!h->ioaccel2_cmd_sg_list)
+ return -ENOMEM;
+ for (i = 0; i < h->nr_cmds; i++) {
+ h->ioaccel2_cmd_sg_list[i] =
+ kmalloc(sizeof(*h->ioaccel2_cmd_sg_list[i]) *
+ h->maxsgentries, GFP_KERNEL);
+ if (!h->ioaccel2_cmd_sg_list[i])
+ goto clean;
+ }
+ return 0;
+
+clean:
+ hpsa_free_ioaccel2_sg_chain_blocks(h);
+ return -ENOMEM;
+}
+
static void hpsa_free_sg_chain_blocks(struct ctlr_info *h)
{
int i;
@@ -1792,6 +1832,39 @@ clean:
return -ENOMEM;
}
+static int hpsa_map_ioaccel2_sg_chain_block(struct ctlr_info *h,
+ struct io_accel2_cmd *cp, struct CommandList *c)
+{
+ struct ioaccel2_sg_element *chain_block;
+ u64 temp64;
+ u32 chain_size;
+
+ chain_block = h->ioaccel2_cmd_sg_list[c->cmdindex];
+ chain_size = le32_to_cpu(cp->data_len);
+ temp64 = pci_map_single(h->pdev, chain_block, chain_size,
+ PCI_DMA_TODEVICE);
+ if (dma_mapping_error(&h->pdev->dev, temp64)) {
+ /* prevent subsequent unmapping */
+ cp->sg->address = 0;
+ return -1;
+ }
+ cp->sg->address = cpu_to_le64(temp64);
+ return 0;
+}
+
+static void hpsa_unmap_ioaccel2_sg_chain_block(struct ctlr_info *h,
+ struct io_accel2_cmd *cp)
+{
+ struct ioaccel2_sg_element *chain_sg;
+ u64 temp64;
+ u32 chain_size;
+
+ chain_sg = cp->sg;
+ temp64 = le64_to_cpu(chain_sg->address);
+ chain_size = le32_to_cpu(cp->data_len);
+ pci_unmap_single(h->pdev, temp64, chain_size, PCI_DMA_TODEVICE);
+}
+
static int hpsa_map_sg_chain_block(struct ctlr_info *h,
struct CommandList *c)
{
@@ -2001,6 +2074,7 @@ static void complete_scsi_command(struct CommandList *cp)
struct ctlr_info *h;
struct ErrorInfo *ei;
struct hpsa_scsi_dev_t *dev;
+ struct io_accel2_cmd *c2;
int sense_key;
int asc; /* additional sense code */
@@ -2011,12 +2085,17 @@ static void complete_scsi_command(struct CommandList *cp)
cmd = cp->scsi_cmd;
h = cp->h;
dev = cmd->device->hostdata;
+ c2 = &h->ioaccel2_cmd_pool[cp->cmdindex];
scsi_dma_unmap(cmd); /* undo the DMA mappings */
if ((cp->cmd_type == CMD_SCSI) &&
(le16_to_cpu(cp->Header.SGTotal) > h->max_cmd_sg_entries))
hpsa_unmap_sg_chain_block(h, cp);
+ if ((cp->cmd_type == CMD_IOACCEL2) &&
+ (c2->sg[0].chain_indicator == IOACCEL2_CHAIN))
+ hpsa_unmap_ioaccel2_sg_chain_block(h, c2);
+
cmd->result = (DID_OK << 16); /* host byte */
cmd->result |= (COMMAND_COMPLETE << 8); /* msg byte */
@@ -3858,10 +3937,7 @@ static int hpsa_scsi_ioaccel2_queue_command(struct ctlr_info *h,
u32 len;
u32 total_len = 0;
- if (scsi_sg_count(cmd) > h->ioaccel_maxsg) {
- atomic_dec(&phys_disk->ioaccel_cmds_out);
- return IO_ACCEL_INELIGIBLE;
- }
+ BUG_ON(scsi_sg_count(cmd) > h->maxsgentries);
if (fixup_ioaccel_cdb(cdb, &cdb_len)) {
atomic_dec(&phys_disk->ioaccel_cmds_out);
@@ -3884,8 +3960,19 @@ static int hpsa_scsi_ioaccel2_queue_command(struct ctlr_info *h,
}
if (use_sg) {
- BUG_ON(use_sg > IOACCEL2_MAXSGENTRIES);
curr_sg = cp->sg;
+ if (use_sg > h->ioaccel_maxsg) {
+ addr64 = le64_to_cpu(
+ h->ioaccel2_cmd_sg_list[c->cmdindex]->address);
+ curr_sg->address = cpu_to_le64(addr64);
+ curr_sg->length = 0;
+ curr_sg->reserved[0] = 0;
+ curr_sg->reserved[1] = 0;
+ curr_sg->reserved[2] = 0;
+ curr_sg->chain_indicator = 0x80;
+
+ curr_sg = h->ioaccel2_cmd_sg_list[c->cmdindex];
+ }
scsi_for_each_sg(cmd, sg, use_sg, i) {
addr64 = (u64) sg_dma_address(sg);
len = sg_dma_len(sg);
@@ -3930,14 +4017,22 @@ static int hpsa_scsi_ioaccel2_queue_command(struct ctlr_info *h,
cp->Tag = cpu_to_le32(c->cmdindex << DIRECT_LOOKUP_SHIFT);
memcpy(cp->cdb, cdb, sizeof(cp->cdb));
- /* fill in sg elements */
- cp->sg_count = (u8) use_sg;
-
cp->data_len = cpu_to_le32(total_len);
cp->err_ptr = cpu_to_le64(c->busaddr +
offsetof(struct io_accel2_cmd, error_data));
cp->err_len = cpu_to_le32(sizeof(cp->error_data));
+ /* fill in sg elements */
+ if (use_sg > h->ioaccel_maxsg) {
+ cp->sg_count = 1;
+ if (hpsa_map_ioaccel2_sg_chain_block(h, cp, c)) {
+ atomic_dec(&phys_disk->ioaccel_cmds_out);
+ scsi_dma_unmap(cmd);
+ return -1;
+ }
+ } else
+ cp->sg_count = (u8) use_sg;
+
enqueue_cmd_and_start_io(h, c);
return 0;
}
@@ -7950,6 +8045,8 @@ clean_up:
/* Free ioaccel2 mode command blocks and block fetch table */
static void hpsa_free_ioaccel2_cmd_and_bft(struct ctlr_info *h)
{
+ hpsa_free_ioaccel2_sg_chain_blocks(h);
+
if (h->ioaccel2_cmd_pool)
pci_free_consistent(h->pdev,
h->nr_cmds * sizeof(*h->ioaccel2_cmd_pool),
@@ -7961,6 +8058,8 @@ static void hpsa_free_ioaccel2_cmd_and_bft(struct ctlr_info *h)
/* Allocate ioaccel2 mode command blocks and block fetch table */
static int hpsa_alloc_ioaccel2_cmd_and_bft(struct ctlr_info *h)
{
+ int rc;
+
/* Allocate ioaccel2 mode command blocks and block fetch table */
h->ioaccel_maxsg =
@@ -7980,7 +8079,13 @@ static int hpsa_alloc_ioaccel2_cmd_and_bft(struct ctlr_info *h)
sizeof(u32)), GFP_KERNEL);
if ((h->ioaccel2_cmd_pool == NULL) ||
- (h->ioaccel2_blockFetchTable == NULL))
+ (h->ioaccel2_blockFetchTable == NULL)) {
+ rc = -ENOMEM;
+ goto clean_up;
+ }
+
+ rc = hpsa_allocate_ioaccel2_sg_chain_blocks(h);
+ if (rc)
goto clean_up;
memset(h->ioaccel2_cmd_pool, 0,
@@ -7989,7 +8094,7 @@ static int hpsa_alloc_ioaccel2_cmd_and_bft(struct ctlr_info *h)
clean_up:
hpsa_free_ioaccel2_cmd_and_bft(h);
- return 1;
+ return rc;
}
static void hpsa_put_ctlr_into_performant_mode(struct ctlr_info *h)
diff --git a/drivers/scsi/hpsa.h b/drivers/scsi/hpsa.h
index 87a70b5..3acacf6 100644
--- a/drivers/scsi/hpsa.h
+++ b/drivers/scsi/hpsa.h
@@ -162,6 +162,7 @@ struct ctlr_info {
u8 max_cmd_sg_entries;
int chainsize;
struct SGDescriptor **cmd_sg_list;
+ struct ioaccel2_sg_element **ioaccel2_cmd_sg_list;
/* pointers to command and error info pool */
struct CommandList *cmd_pool;
^ permalink raw reply related [flat|nested] 58+ messages in thread* [PATCH 20/43] hpsa: add more ioaccel2 error handling, including underrun statuses.
2015-02-21 22:17 [PATCH 00/43] hpsa updates Don Brace
` (18 preceding siblings ...)
2015-02-21 22:19 ` [PATCH 19/43] hpsa: add ioaccel sg chaining for the ioaccel2 path Don Brace
@ 2015-02-21 22:19 ` Don Brace
2015-02-21 22:19 ` [PATCH 21/43] hpsa: do not check cmd_alloc return value - it cannnot return NULL Don Brace
` (22 subsequent siblings)
42 siblings, 0 replies; 58+ messages in thread
From: Don Brace @ 2015-02-21 22:19 UTC (permalink / raw)
To: scott.teel, Kevin.Barnett, james.bottomley, hch, Justin.Lindley,
brace
Cc: linux-scsi
From: Joe Handzik <joseph.t.handzik@hp.com>
improve ioaccel2 error handling, including better handling of
underrun statuses
Reviewed-by: Scott Teel <scott.teel@pmcs.com>
Reviewed-by: Kevin Barnett <kevin.barnett@pmcs.com>
Signed-off-by: Joe Handzik <joseph.t.handzik@hp.com>
Signed-off-by: Don Brace <don.brace@pmcs.com>
---
drivers/scsi/hpsa.c | 33 ++++++++++++++++++++++++++++-----
drivers/scsi/hpsa_cmd.h | 6 ++++++
2 files changed, 34 insertions(+), 5 deletions(-)
diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index 9cf7ed7..604e25e 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -1914,6 +1914,7 @@ static int handle_ioaccel_mode2_error(struct ctlr_info *h,
{
int data_len;
int retry = 0;
+ u32 ioaccel2_resid = 0;
switch (c2->error_data.serv_response) {
case IOACCEL2_SERV_RESPONSE_COMPLETE:
@@ -1972,11 +1973,33 @@ static int handle_ioaccel_mode2_error(struct ctlr_info *h,
}
break;
case IOACCEL2_SERV_RESPONSE_FAILURE:
- /* don't expect to get here. */
- dev_warn(&h->pdev->dev,
- "unexpected delivery or target failure, status = 0x%02x\n",
- c2->error_data.status);
- retry = 1;
+ switch (c2->error_data.status) {
+ case IOACCEL2_STATUS_SR_IO_ERROR:
+ case IOACCEL2_STATUS_SR_IO_ABORTED:
+ case IOACCEL2_STATUS_SR_OVERRUN:
+ retry = 1;
+ break;
+ case IOACCEL2_STATUS_SR_UNDERRUN:
+ cmd->result = (DID_OK << 16); /* host byte */
+ cmd->result |= (COMMAND_COMPLETE << 8); /* msg byte */
+ ioaccel2_resid = c2->error_data.resid_cnt[3] << 24;
+ ioaccel2_resid |= c2->error_data.resid_cnt[2] << 16;
+ ioaccel2_resid |= c2->error_data.resid_cnt[1] << 8;
+ ioaccel2_resid |= c2->error_data.resid_cnt[0];
+ scsi_set_resid(cmd, ioaccel2_resid);
+ break;
+ case IOACCEL2_STATUS_SR_NO_PATH_TO_DEVICE:
+ case IOACCEL2_STATUS_SR_INVALID_DEVICE:
+ case IOACCEL2_STATUS_SR_IOACCEL_DISABLED:
+ /* We will get an event from ctlr to trigger rescan */
+ retry = 1;
+ break;
+ default:
+ retry = 1;
+ dev_warn(&h->pdev->dev,
+ "unexpected delivery or target failure, status = 0x%02x\n",
+ c2->error_data.status);
+ }
break;
case IOACCEL2_SERV_RESPONSE_TMF_COMPLETE:
break;
diff --git a/drivers/scsi/hpsa_cmd.h b/drivers/scsi/hpsa_cmd.h
index 0efb6f2b..cecb62b 100644
--- a/drivers/scsi/hpsa_cmd.h
+++ b/drivers/scsi/hpsa_cmd.h
@@ -532,6 +532,12 @@ struct io_accel2_scsi_response {
#define IOACCEL2_STATUS_SR_TASK_COMP_SET_FULL 0x28
#define IOACCEL2_STATUS_SR_TASK_COMP_ABORTED 0x40
#define IOACCEL2_STATUS_SR_IOACCEL_DISABLED 0x0E
+#define IOACCEL2_STATUS_SR_IO_ERROR 0x01
+#define IOACCEL2_STATUS_SR_IO_ABORTED 0x02
+#define IOACCEL2_STATUS_SR_NO_PATH_TO_DEVICE 0x03
+#define IOACCEL2_STATUS_SR_INVALID_DEVICE 0x04
+#define IOACCEL2_STATUS_SR_UNDERRUN 0x51
+#define IOACCEL2_STATUS_SR_OVERRUN 0x75
u8 data_present; /* low 2 bits */
#define IOACCEL2_NO_DATAPRESENT 0x000
#define IOACCEL2_RESPONSE_DATAPRESENT 0x001
^ permalink raw reply related [flat|nested] 58+ messages in thread* [PATCH 21/43] hpsa: do not check cmd_alloc return value - it cannnot return NULL
2015-02-21 22:17 [PATCH 00/43] hpsa updates Don Brace
` (19 preceding siblings ...)
2015-02-21 22:19 ` [PATCH 20/43] hpsa: add more ioaccel2 error handling, including underrun statuses Don Brace
@ 2015-02-21 22:19 ` Don Brace
2015-02-21 22:19 ` [PATCH 22/43] hpsa: correct return values from driver functions Don Brace
` (21 subsequent siblings)
42 siblings, 0 replies; 58+ messages in thread
From: Don Brace @ 2015-02-21 22:19 UTC (permalink / raw)
To: scott.teel, Kevin.Barnett, james.bottomley, hch, Justin.Lindley,
brace
Cc: linux-scsi
From: Robert Elliott <elliott@hp.com>
cmd_alloc can no longer return NULL, so don't check for NULL any more
(which is unreachable code).
Reviewed-by: Scott Teel <scott.teel@pmcs.com>
Reviewed-by: Kevin Barnett <kevin.barnett@pmcs.com>
Signed-off-by: Robert Elliott <elliott@hp.com>
Signed-off-by: Don Brace <don.brace@pmcs.com>
---
drivers/scsi/hpsa.c | 77 ++++++++++-----------------------------------------
1 file changed, 15 insertions(+), 62 deletions(-)
diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index 604e25e..b7223e6 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -2520,11 +2520,6 @@ static int hpsa_scsi_do_inquiry(struct ctlr_info *h, unsigned char *scsi3addr,
c = cmd_alloc(h);
- if (c == NULL) {
- dev_warn(&h->pdev->dev, "cmd_alloc returned NULL!\n");
- return -ENOMEM;
- }
-
if (fill_cmd(c, HPSA_INQUIRY, h, buf, bufsize,
page, scsi3addr, TYPE_CMD)) {
rc = -1;
@@ -2553,11 +2548,6 @@ static int hpsa_bmic_ctrl_mode_sense(struct ctlr_info *h,
struct ErrorInfo *ei;
c = cmd_alloc(h);
- if (c == NULL) { /* trouble... */
- dev_warn(&h->pdev->dev, "cmd_alloc returned NULL!\n");
- return -ENOMEM;
- }
-
if (fill_cmd(c, BMIC_SENSE_CONTROLLER_PARAMETERS, h, buf, bufsize,
page, scsi3addr, TYPE_CMD)) {
rc = -1;
@@ -2575,7 +2565,7 @@ static int hpsa_bmic_ctrl_mode_sense(struct ctlr_info *h,
out:
cmd_free(h, c);
return rc;
- }
+}
static int hpsa_send_reset(struct ctlr_info *h, unsigned char *scsi3addr,
u8 reset_type, int reply_queue)
@@ -2586,10 +2576,6 @@ static int hpsa_send_reset(struct ctlr_info *h, unsigned char *scsi3addr,
c = cmd_alloc(h);
- if (c == NULL) { /* trouble... */
- dev_warn(&h->pdev->dev, "cmd_alloc returned NULL!\n");
- return -ENOMEM;
- }
/* fill_cmd can't fail here, no data buffer to map. */
(void) fill_cmd(c, HPSA_DEVICE_RESET_MSG, h, NULL, 0, 0,
@@ -2717,10 +2703,7 @@ static int hpsa_get_raid_map(struct ctlr_info *h,
struct ErrorInfo *ei;
c = cmd_alloc(h);
- if (c == NULL) {
- dev_warn(&h->pdev->dev, "cmd_alloc returned NULL!\n");
- return -ENOMEM;
- }
+
if (fill_cmd(c, HPSA_GET_RAID_MAP, h, &this_device->raid_map,
sizeof(this_device->raid_map), 0,
scsi3addr, TYPE_CMD)) {
@@ -2893,10 +2876,7 @@ static int hpsa_scsi_do_report_luns(struct ctlr_info *h, int logical,
struct ErrorInfo *ei;
c = cmd_alloc(h);
- if (c == NULL) { /* trouble... */
- dev_err(&h->pdev->dev, "cmd_alloc returned NULL!\n");
- return -1;
- }
+
/* address the controller */
memset(scsi3addr, 0, sizeof(scsi3addr));
if (fill_cmd(c, logical ? HPSA_REPORT_LOG : HPSA_REPORT_PHYS, h,
@@ -3011,8 +2991,7 @@ static int hpsa_volume_offline(struct ctlr_info *h,
#define ASCQ_LUN_NOT_READY_INITIALIZING_CMD_REQ 0x02
c = cmd_alloc(h);
- if (!c)
- return 0;
+
(void) fill_cmd(c, TEST_UNIT_READY, h, NULL, 0, 0, scsi3addr, TYPE_CMD);
rc = hpsa_scsi_do_simple_cmd(h, c, DEFAULT_REPLY_QUEUE, NO_TIMEOUT);
if (rc) {
@@ -3086,8 +3065,7 @@ static int hpsa_device_supports_aborts(struct ctlr_info *h,
return 1;
c = cmd_alloc(h);
- if (!c)
- return -ENOMEM;
+
(void) fill_cmd(c, HPSA_ABORT_MSG, h, &tag, 0, 0, scsi3addr, TYPE_MSG);
(void) hpsa_scsi_do_simple_cmd(h, c, DEFAULT_REPLY_QUEUE, NO_TIMEOUT);
/* no unmap needed here because no data xfer. */
@@ -4658,10 +4636,7 @@ static int hpsa_scsi_queue_command(struct Scsi_Host *sh, struct scsi_cmnd *cmd)
return 0;
}
c = cmd_alloc(h);
- if (c == NULL) { /* trouble... */
- dev_err(&h->pdev->dev, "cmd_alloc returned NULL!\n");
- return SCSI_MLQUEUE_HOST_BUSY;
- }
+
if (unlikely(lockup_detected(h))) {
cmd->result = DID_NO_CONNECT << 16;
cmd_free(h, c);
@@ -4822,11 +4797,6 @@ static int wait_for_device_to_become_ready(struct ctlr_info *h,
struct CommandList *c;
c = cmd_alloc(h);
- if (!c) {
- dev_warn(&h->pdev->dev, "out of memory in "
- "wait_for_device_to_become_ready.\n");
- return IO_ERROR;
- }
/* Send test unit ready until device ready, or give up. */
while (count < HPSA_TUR_RETRY_LIMIT) {
@@ -4989,10 +4959,6 @@ static int hpsa_send_abort(struct ctlr_info *h, unsigned char *scsi3addr,
__le32 tagupper, taglower;
c = cmd_alloc(h);
- if (c == NULL) { /* trouble... */
- dev_warn(&h->pdev->dev, "cmd_alloc returned NULL!\n");
- return -ENOMEM;
- }
/* fill_cmd can't fail here, no buffer to map */
(void) fill_cmd(c, HPSA_ABORT_MSG, h, &abort->Header.tag,
@@ -5279,6 +5245,8 @@ static int hpsa_eh_abort_handler(struct scsi_cmnd *sc)
* and managed by cmd_alloc() and cmd_free() using a simple bitmap to track
* which ones are free or in use. Lock must be held when calling this.
* cmd_free() is the complement.
+ * This function never gives up and returns NULL. If it hangs,
+ * another thread must call cmd_free() to free some tags.
*/
static struct CommandList *cmd_alloc(struct ctlr_info *h)
@@ -5512,10 +5480,7 @@ static int hpsa_passthru_ioctl(struct ctlr_info *h, void __user *argp)
}
}
c = cmd_alloc(h);
- if (c == NULL) {
- rc = -ENOMEM;
- goto out_kfree;
- }
+
/* Fill in the command type */
c->cmd_type = CMD_IOCTL_PEND;
/* Fill in Command Header */
@@ -5649,10 +5614,7 @@ static int hpsa_big_passthru_ioctl(struct ctlr_info *h, void __user *argp)
sg_used++;
}
c = cmd_alloc(h);
- if (c == NULL) {
- status = -ENOMEM;
- goto cleanup1;
- }
+
c->cmd_type = CMD_IOCTL_PEND;
c->Header.ReplyQueue = 0;
c->Header.SGList = (u8) sg_used;
@@ -5768,14 +5730,13 @@ static int hpsa_ioctl(struct scsi_device *dev, int cmd, void __user *arg)
}
}
-static int hpsa_send_host_reset(struct ctlr_info *h, unsigned char *scsi3addr,
+static void hpsa_send_host_reset(struct ctlr_info *h, unsigned char *scsi3addr,
u8 reset_type)
{
struct CommandList *c;
c = cmd_alloc(h);
- if (!c)
- return -ENOMEM;
+
/* fill_cmd can't fail here, no data buffer to map */
(void) fill_cmd(c, HPSA_DEVICE_RESET_MSG, h, NULL, 0, 0,
RAID_CTLR_LUNID, TYPE_MSG);
@@ -5786,7 +5747,7 @@ static int hpsa_send_host_reset(struct ctlr_info *h, unsigned char *scsi3addr,
* the command either. This is the last command we will send before
* re-initializing everything, so it doesn't matter and won't leak.
*/
- return 0;
+ return;
}
static int fill_cmd(struct CommandList *c, u8 cmd, struct ctlr_info *h,
@@ -7188,11 +7149,7 @@ static int hpsa_request_irqs(struct ctlr_info *h,
static int hpsa_kdump_soft_reset(struct ctlr_info *h)
{
- if (hpsa_send_host_reset(h, RAID_CTLR_LUNID,
- HPSA_RESET_TYPE_CONTROLLER)) {
- dev_warn(&h->pdev->dev, "Resetting array controller failed.\n");
- return -EIO;
- }
+ hpsa_send_host_reset(h, RAID_CTLR_LUNID, HPSA_RESET_TYPE_CONTROLLER);
dev_info(&h->pdev->dev, "Waiting for board to soft reset.\n");
if (hpsa_wait_for_board_state(h->pdev, h->vaddr, BOARD_NOT_READY)) {
@@ -7696,10 +7653,7 @@ static void hpsa_flush_cache(struct ctlr_info *h)
return;
c = cmd_alloc(h);
- if (!c) {
- dev_warn(&h->pdev->dev, "cmd_alloc returned NULL!\n");
- goto out_of_memory;
- }
+
if (fill_cmd(c, HPSA_CACHE_FLUSH, h, flush_buf, 4, 0,
RAID_CTLR_LUNID, TYPE_CMD)) {
goto out;
@@ -7713,7 +7667,6 @@ out:
dev_warn(&h->pdev->dev,
"error flushing cache on controller\n");
cmd_free(h, c);
-out_of_memory:
kfree(flush_buf);
}
^ permalink raw reply related [flat|nested] 58+ messages in thread* [PATCH 22/43] hpsa: correct return values from driver functions.
2015-02-21 22:17 [PATCH 00/43] hpsa updates Don Brace
` (20 preceding siblings ...)
2015-02-21 22:19 ` [PATCH 21/43] hpsa: do not check cmd_alloc return value - it cannnot return NULL Don Brace
@ 2015-02-21 22:19 ` Don Brace
2015-02-21 22:19 ` [PATCH 23/43] hpsa: clean up driver init Don Brace
` (20 subsequent siblings)
42 siblings, 0 replies; 58+ messages in thread
From: Don Brace @ 2015-02-21 22:19 UTC (permalink / raw)
To: scott.teel, Kevin.Barnett, james.bottomley, hch, Justin.Lindley,
brace
Cc: linux-scsi
From: Robert Elliott <elliott@hp.com>
correct return codes for error conditions
Reviewed-by: Scott Teel <scott.teel@pmcs.com>
Reviewed-by: Kevin Barnett <kevin.barnett@pmcs.com>
Signed-off-by: Robert Elliott <elliott@hp.com>
Signed-off-by: Don Brace <don.brace@pmcs.com>
---
drivers/scsi/hpsa.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index b7223e6..af0439b 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -2707,9 +2707,9 @@ static int hpsa_get_raid_map(struct ctlr_info *h,
if (fill_cmd(c, HPSA_GET_RAID_MAP, h, &this_device->raid_map,
sizeof(this_device->raid_map), 0,
scsi3addr, TYPE_CMD)) {
- dev_warn(&h->pdev->dev, "Out of memory in hpsa_get_raid_map()\n");
- rc = -ENOMEM;
- goto out;
+ dev_warn(&h->pdev->dev, "hpsa_get_raid_map fill_cmd failed\n");
+ cmd_free(h, c);
+ return -1;
}
rc = hpsa_scsi_do_simple_cmd_with_retry(h, c,
PCI_DMA_FROMDEVICE, NO_TIMEOUT);
@@ -5467,7 +5467,7 @@ static int hpsa_passthru_ioctl(struct ctlr_info *h, void __user *argp)
if (iocommand.buf_size > 0) {
buff = kmalloc(iocommand.buf_size, GFP_KERNEL);
if (buff == NULL)
- return -EFAULT;
+ return -ENOMEM;
if (iocommand.Request.Type.Direction & XFER_WRITE) {
/* Copy the data into the buffer we created */
if (copy_from_user(buff, iocommand.buf,
@@ -8015,7 +8015,7 @@ static int hpsa_alloc_ioaccel1_cmd_and_bft(struct ctlr_info *h)
clean_up:
hpsa_free_ioaccel1_cmd_and_bft(h);
- return 1;
+ return -ENOMEM;
}
/* Free ioaccel2 mode command blocks and block fetch table */
^ permalink raw reply related [flat|nested] 58+ messages in thread* [PATCH 23/43] hpsa: clean up driver init
2015-02-21 22:17 [PATCH 00/43] hpsa updates Don Brace
` (21 preceding siblings ...)
2015-02-21 22:19 ` [PATCH 22/43] hpsa: correct return values from driver functions Don Brace
@ 2015-02-21 22:19 ` Don Brace
2015-02-21 22:19 ` [PATCH 24/43] hpsa: clean up some error reporting output in abort handler Don Brace
` (19 subsequent siblings)
42 siblings, 0 replies; 58+ messages in thread
From: Don Brace @ 2015-02-21 22:19 UTC (permalink / raw)
To: scott.teel, Kevin.Barnett, james.bottomley, hch, Justin.Lindley,
brace
Cc: linux-scsi
From: Robert Elliott <elliott@hp.com>
Improve initialization error handling in hpsa_init_one
Clean up style and indent issues
Rename functions for consistency
Improve error messaging on allocations
Fix return status from hpsa_put_ctlr_into_performant_mode
Correct free order in hpsa_init_one using new function
hpsa_free_performant_mode
Prevent inadvertent use of null pointers by nulling out the parent structures
and zeroing out associated size variables.
Reviewed-by: Scott Teel <scott.teel@pmcs.com>
Reviewed-by: Kevin Barnett <kevin.barnett@pmcs.com>
Signed-off-by: Robert Elliott <elliott@hp.com>
Signed-off-by: Don Brace <don.brace@pmcs.com>
---
drivers/scsi/hpsa.c | 244 +++++++++++++++++++++++++++++++++------------------
1 file changed, 158 insertions(+), 86 deletions(-)
diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index af0439b..e76fa03 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -233,9 +233,8 @@ static void check_ioctl_unit_attention(struct ctlr_info *h,
/* performant mode helper functions */
static void calc_bucket_map(int *bucket, int num_buckets,
int nsgs, int min_blocks, u32 *bucket_map);
-static void hpsa_put_ctlr_into_performant_mode(struct ctlr_info *h);
-static void hpsa_free_ioaccel1_cmd_and_bft(struct ctlr_info *h);
-static void hpsa_free_ioaccel2_cmd_and_bft(struct ctlr_info *h);
+static void hpsa_free_performant_mode(struct ctlr_info *h);
+static int hpsa_put_ctlr_into_performant_mode(struct ctlr_info *h);
static inline u32 next_command(struct ctlr_info *h, u8 q);
static int hpsa_find_cfg_addrs(struct pci_dev *pdev, void __iomem *vaddr,
u32 *cfg_base_addr, u64 *cfg_base_addr_index,
@@ -1673,6 +1672,7 @@ static void adjust_hpsa_scsi_table(struct ctlr_info *h, int hostno,
* since it didn't get added to scsi mid layer
*/
fixup_botched_add(h, added[i]);
+ added[i] = NULL;
}
free_and_out:
@@ -1804,7 +1804,7 @@ static void hpsa_free_sg_chain_blocks(struct ctlr_info *h)
h->cmd_sg_list = NULL;
}
-static int hpsa_allocate_sg_chain_blocks(struct ctlr_info *h)
+static int hpsa_alloc_sg_chain_blocks(struct ctlr_info *h)
{
int i;
@@ -6501,9 +6501,11 @@ static void hpsa_disable_interrupt_mode(struct ctlr_info *h)
if (h->msix_vector) {
if (h->pdev->msix_enabled)
pci_disable_msix(h->pdev);
+ h->msix_vector = 0;
} else if (h->msi_vector) {
if (h->pdev->msi_enabled)
pci_disable_msi(h->pdev);
+ h->msi_vector = 0;
}
#endif /* CONFIG_PCI_MSI */
}
@@ -6643,10 +6645,14 @@ static int hpsa_find_cfg_addrs(struct pci_dev *pdev, void __iomem *vaddr,
static void hpsa_free_cfgtables(struct ctlr_info *h)
{
- if (h->transtable)
+ if (h->transtable) {
iounmap(h->transtable);
- if (h->cfgtable)
+ h->transtable = NULL;
+ }
+ if (h->cfgtable) {
iounmap(h->cfgtable);
+ h->cfgtable = NULL;
+ }
}
/* Find and map CISS config table and transfer table
@@ -6863,6 +6869,7 @@ static void hpsa_free_pci_init(struct ctlr_info *h)
{
hpsa_free_cfgtables(h); /* pci_init 4 */
iounmap(h->vaddr); /* pci_init 3 */
+ h->vaddr = NULL;
hpsa_disable_interrupt_mode(h); /* pci_init 2 */
pci_release_regions(h->pdev); /* pci_init 2 */
pci_disable_device(h->pdev); /* pci_init 1 */
@@ -6933,6 +6940,7 @@ clean4: /* cfgtables, vaddr, intmode+region, pci */
hpsa_free_cfgtables(h);
clean3: /* vaddr, intmode+region, pci */
iounmap(h->vaddr);
+ h->vaddr = NULL;
clean2: /* intmode+region, pci */
hpsa_disable_interrupt_mode(h);
pci_release_regions(h->pdev);
@@ -7022,16 +7030,23 @@ out_disable:
static void hpsa_free_cmd_pool(struct ctlr_info *h)
{
kfree(h->cmd_pool_bits);
- if (h->cmd_pool)
+ h->cmd_pool_bits = NULL;
+ if (h->cmd_pool) {
pci_free_consistent(h->pdev,
h->nr_cmds * sizeof(struct CommandList),
h->cmd_pool,
h->cmd_pool_dhandle);
- if (h->errinfo_pool)
+ h->cmd_pool = NULL;
+ h->cmd_pool_dhandle = 0;
+ }
+ if (h->errinfo_pool) {
pci_free_consistent(h->pdev,
h->nr_cmds * sizeof(struct ErrorInfo),
h->errinfo_pool,
h->errinfo_pool_dhandle);
+ h->errinfo_pool = NULL;
+ h->errinfo_pool_dhandle = 0;
+ }
}
static int hpsa_alloc_cmd_pool(struct ctlr_info *h)
@@ -7079,12 +7094,14 @@ static void hpsa_free_irqs(struct ctlr_info *h)
i = h->intr_mode;
irq_set_affinity_hint(h->intr[i], NULL);
free_irq(h->intr[i], &h->q[i]);
+ h->q[i] = 0;
return;
}
for (i = 0; i < h->msix_vector; i++) {
irq_set_affinity_hint(h->intr[i], NULL);
free_irq(h->intr[i], &h->q[i]);
+ h->q[i] = 0;
}
for (; i < MAX_REPLY_QUEUES; i++)
h->q[i] = 0;
@@ -7137,6 +7154,7 @@ static int hpsa_request_irqs(struct ctlr_info *h,
intxhandler, IRQF_SHARED, h->devname,
&h->q[h->intr_mode]);
}
+ irq_set_affinity_hint(h->intr[h->intr_mode], NULL);
}
if (rc) {
dev_err(&h->pdev->dev, "failed to get irq %d for %s\n",
@@ -7181,23 +7199,17 @@ static void hpsa_free_reply_queues(struct ctlr_info *h)
h->reply_queue[i].head = NULL;
h->reply_queue[i].busaddr = 0;
}
+ h->reply_queue_size = 0;
}
static void hpsa_undo_allocations_after_kdump_soft_reset(struct ctlr_info *h)
{
- hpsa_free_irqs(h);
- hpsa_free_sg_chain_blocks(h);
- hpsa_free_cmd_pool(h);
- kfree(h->blockFetchTable); /* perf 2 */
- hpsa_free_reply_queues(h); /* perf 1 */
- hpsa_free_ioaccel1_cmd_and_bft(h); /* perf 1 */
- hpsa_free_ioaccel2_cmd_and_bft(h); /* perf 1 */
- hpsa_free_cfgtables(h); /* pci_init 4 */
- iounmap(h->vaddr); /* pci_init 3 */
- hpsa_disable_interrupt_mode(h); /* pci_init 2 */
- pci_disable_device(h->pdev);
- pci_release_regions(h->pdev); /* pci_init 2 */
- kfree(h);
+ hpsa_free_performant_mode(h); /* init_one 7 */
+ hpsa_free_sg_chain_blocks(h); /* init_one 6 */
+ hpsa_free_cmd_pool(h); /* init_one 5 */
+ hpsa_free_irqs(h); /* init_one 4 */
+ hpsa_free_pci_init(h); /* init_one 3 */
+ kfree(h); /* init_one 1 */
}
/* Called when controller lockup detected. */
@@ -7464,10 +7476,13 @@ reinit_after_soft_reset:
*/
BUILD_BUG_ON(sizeof(struct CommandList) % COMMANDLIST_ALIGNMENT);
h = kzalloc(sizeof(*h), GFP_KERNEL);
- if (!h)
+ if (!h) {
+ dev_err(&pdev->dev, "Failed to allocate controller head\n");
return -ENOMEM;
+ }
h->pdev = pdev;
+
h->intr_mode = hpsa_simple_mode ? SIMPLE_MODE_INT : PERF_MODE_INT;
INIT_LIST_HEAD(&h->offline_device_list);
spin_lock_init(&h->lock);
@@ -7485,20 +7500,21 @@ reinit_after_soft_reset:
h->resubmit_wq = hpsa_create_controller_wq(h, "resubmit");
if (!h->resubmit_wq) {
rc = -ENOMEM;
- goto clean1;
+ goto clean1; /* aer/h */
}
/* Allocate and clear per-cpu variable lockup_detected */
h->lockup_detected = alloc_percpu(u32);
if (!h->lockup_detected) {
+ dev_err(&h->pdev->dev, "Failed to allocate lockup detector\n");
rc = -ENOMEM;
- goto clean1;
+ goto clean1; /* wq/aer/h */
}
set_lockup_detected_for_all_cpus(h, 0);
rc = hpsa_pci_init(h);
- if (rc != 0)
- goto clean1;
+ if (rc)
+ goto clean2; /* lockup, wq/aer/h */
sprintf(h->devname, HPSA "%d", number_of_controllers);
h->ctlr = number_of_controllers;
@@ -7514,23 +7530,25 @@ reinit_after_soft_reset:
dac = 0;
} else {
dev_err(&pdev->dev, "no suitable DMA available\n");
- goto clean2;
+ goto clean3; /* pci, lockup, wq/aer/h */
}
}
/* make sure the board interrupts are off */
h->access.set_intr_mask(h, HPSA_INTR_OFF);
- if (hpsa_request_irqs(h, do_hpsa_intr_msi, do_hpsa_intr_intx))
- goto clean2;
+ rc = hpsa_request_irqs(h, do_hpsa_intr_msi, do_hpsa_intr_intx);
+ if (rc)
+ goto clean3; /* pci, lockup, wq/aer/h */
dev_info(&pdev->dev, "%s: <0x%x> at IRQ %d%s using DAC\n",
h->devname, pdev->device,
h->intr[h->intr_mode], dac ? "" : " not");
rc = hpsa_alloc_cmd_pool(h);
if (rc)
- goto clean2_and_free_irqs;
- if (hpsa_allocate_sg_chain_blocks(h))
- goto clean4;
+ goto clean4; /* irq, pci, lockup, wq/aer/h */
+ rc = hpsa_alloc_sg_chain_blocks(h);
+ if (rc)
+ goto clean5; /* cmd, irq, pci, lockup, wq/aer/h */
init_waitqueue_head(&h->scan_wait_queue);
init_waitqueue_head(&h->abort_cmd_wait_queue);
h->scan_finished = 1; /* no scan currently in progress */
@@ -7540,9 +7558,12 @@ reinit_after_soft_reset:
h->hba_mode_enabled = 0;
h->scsi_host = NULL;
spin_lock_init(&h->devlock);
- hpsa_put_ctlr_into_performant_mode(h);
+ rc = hpsa_put_ctlr_into_performant_mode(h);
+ if (rc)
+ goto clean6; /* sg, cmd, irq, pci, lockup, wq/aer/h */
- /* At this point, the controller is ready to take commands.
+ /*
+ * At this point, the controller is ready to take commands.
* Now, if reset_devices and the hard reset didn't work, try
* the soft reset and see if that works.
*/
@@ -7597,16 +7618,17 @@ reinit_after_soft_reset:
goto reinit_after_soft_reset;
}
- /* Enable Accelerated IO path at driver layer */
- h->acciopath_status = 1;
+ /* Enable Accelerated IO path at driver layer */
+ h->acciopath_status = 1;
/* Turn the interrupts on so we can service requests */
h->access.set_intr_mask(h, HPSA_INTR_ON);
hpsa_hba_inquiry(h);
- if (hpsa_register_scsi(h)) /* hook ourselves into SCSI subsystem */
- goto clean4;
+ rc = hpsa_register_scsi(h); /* hook ourselves into SCSI subsystem */
+ if (rc)
+ goto clean7;
/* Monitor the controller for firmware lockups */
h->heartbeat_sample_interval = HEARTBEAT_SAMPLE_INTERVAL;
@@ -7618,22 +7640,32 @@ reinit_after_soft_reset:
h->heartbeat_sample_interval);
return 0;
-clean4:
+clean7: /* perf, sg, cmd, irq, pci, lockup, wq/aer/h */
+ kfree(h->hba_inquiry_data);
+ hpsa_free_performant_mode(h);
+ h->access.set_intr_mask(h, HPSA_INTR_OFF);
+clean6: /* sg, cmd, irq, pci, lockup, wq/aer/h */
hpsa_free_sg_chain_blocks(h);
+clean5: /* cmd, irq, pci, lockup, wq/aer/h */
hpsa_free_cmd_pool(h);
- hpsa_free_ioaccel1_cmd_and_bft(h);
- hpsa_free_ioaccel2_cmd_and_bft(h);
-clean2_and_free_irqs:
+clean4: /* irq, pci, lockup, wq/aer/h */
hpsa_free_irqs(h);
-clean2:
+clean3: /* pci, lockup, wq/aer/h */
hpsa_free_pci_init(h);
-clean1:
- if (h->resubmit_wq)
+clean2: /* lockup, wq/aer/h */
+ if (h->lockup_detected) {
+ free_percpu(h->lockup_detected);
+ h->lockup_detected = NULL;
+ }
+clean1: /* wq/aer/h */
+ if (h->resubmit_wq) {
destroy_workqueue(h->resubmit_wq);
- if (h->rescan_ctlr_wq)
+ h->resubmit_wq = NULL;
+ }
+ if (h->rescan_ctlr_wq) {
destroy_workqueue(h->rescan_ctlr_wq);
- if (h->lockup_detected)
- free_percpu(h->lockup_detected);
+ h->rescan_ctlr_wq = NULL;
+ }
kfree(h);
return rc;
}
@@ -7681,7 +7713,7 @@ static void hpsa_shutdown(struct pci_dev *pdev)
*/
hpsa_flush_cache(h);
h->access.set_intr_mask(h, HPSA_INTR_OFF);
- hpsa_free_irqs(h);
+ hpsa_free_irqs(h); /* init_one 4 */
hpsa_disable_interrupt_mode(h); /* pci_init 2 */
}
@@ -7689,8 +7721,10 @@ static void hpsa_free_device_info(struct ctlr_info *h)
{
int i;
- for (i = 0; i < h->ndevices; i++)
+ for (i = 0; i < h->ndevices; i++) {
kfree(h->dev[i]);
+ h->dev[i] = NULL;
+ }
}
static void hpsa_remove_one(struct pci_dev *pdev)
@@ -7712,26 +7746,29 @@ static void hpsa_remove_one(struct pci_dev *pdev)
cancel_delayed_work_sync(&h->rescan_ctlr_work);
destroy_workqueue(h->rescan_ctlr_wq);
destroy_workqueue(h->resubmit_wq);
- hpsa_unregister_scsi(h); /* unhook from SCSI subsystem */
- /* includes hpsa_free_irqs */
+ /* includes hpsa_free_irqs - init_one 4 */
/* includes hpsa_disable_interrupt_mode - pci_init 2 */
hpsa_shutdown(pdev);
- hpsa_free_device_info(h);
- hpsa_free_sg_chain_blocks(h);
- kfree(h->blockFetchTable); /* perf 2 */
- hpsa_free_reply_queues(h); /* perf 1 */
- hpsa_free_ioaccel1_cmd_and_bft(h); /* perf 1 */
- hpsa_free_ioaccel2_cmd_and_bft(h); /* perf 1 */
- hpsa_free_cmd_pool(h); /* init_one 5 */
- kfree(h->hba_inquiry_data);
+ hpsa_free_device_info(h); /* scan */
+
+ hpsa_unregister_scsi(h); /* init_one "8" */
+ kfree(h->hba_inquiry_data); /* init_one "8" */
+ h->hba_inquiry_data = NULL; /* init_one "8" */
+ hpsa_free_performant_mode(h); /* init_one 7 */
+ hpsa_free_sg_chain_blocks(h); /* init_one 6 */
+ hpsa_free_cmd_pool(h); /* init_one 5 */
+
+ /* hpsa_free_irqs already called via hpsa_shutdown init_one 4 */
/* includes hpsa_disable_interrupt_mode - pci_init 2 */
- hpsa_free_pci_init(h);
+ hpsa_free_pci_init(h); /* init_one 3 */
- free_percpu(h->lockup_detected);
- kfree(h);
+ free_percpu(h->lockup_detected); /* init_one 2 */
+ h->lockup_detected = NULL; /* init_one 2 */
+ /* (void) pci_disable_pcie_error_reporting(pdev); */ /* init_one 1 */
+ kfree(h); /* init_one 1 */
}
static int hpsa_suspend(__attribute__((unused)) struct pci_dev *pdev,
@@ -7789,7 +7826,10 @@ static void calc_bucket_map(int bucket[], int num_buckets,
}
}
-/* return -ENODEV or other reason on error, 0 on success */
+/*
+ * return -ENODEV on err, 0 on success (or no action)
+ * allocates numerous items that must be freed later
+ */
static int hpsa_enter_performant_mode(struct ctlr_info *h, u32 trans_support)
{
int i;
@@ -7974,12 +8014,16 @@ static int hpsa_enter_performant_mode(struct ctlr_info *h, u32 trans_support)
/* Free ioaccel1 mode command blocks and block fetch table */
static void hpsa_free_ioaccel1_cmd_and_bft(struct ctlr_info *h)
{
- if (h->ioaccel_cmd_pool)
+ if (h->ioaccel_cmd_pool) {
pci_free_consistent(h->pdev,
h->nr_cmds * sizeof(*h->ioaccel_cmd_pool),
h->ioaccel_cmd_pool,
h->ioaccel_cmd_pool_dhandle);
+ h->ioaccel_cmd_pool = NULL;
+ h->ioaccel_cmd_pool_dhandle = 0;
+ }
kfree(h->ioaccel1_blockFetchTable);
+ h->ioaccel1_blockFetchTable = NULL;
}
/* Allocate ioaccel1 mode command blocks and block fetch table */
@@ -8023,12 +8067,16 @@ static void hpsa_free_ioaccel2_cmd_and_bft(struct ctlr_info *h)
{
hpsa_free_ioaccel2_sg_chain_blocks(h);
- if (h->ioaccel2_cmd_pool)
+ if (h->ioaccel2_cmd_pool) {
pci_free_consistent(h->pdev,
h->nr_cmds * sizeof(*h->ioaccel2_cmd_pool),
h->ioaccel2_cmd_pool,
h->ioaccel2_cmd_pool_dhandle);
+ h->ioaccel2_cmd_pool = NULL;
+ h->ioaccel2_cmd_pool_dhandle = 0;
+ }
kfree(h->ioaccel2_blockFetchTable);
+ h->ioaccel2_blockFetchTable = NULL;
}
/* Allocate ioaccel2 mode command blocks and block fetch table */
@@ -8073,33 +8121,46 @@ clean_up:
return rc;
}
-static void hpsa_put_ctlr_into_performant_mode(struct ctlr_info *h)
+/* Free items allocated by hpsa_put_ctlr_into_performant_mode */
+static void hpsa_free_performant_mode(struct ctlr_info *h)
+{
+ kfree(h->blockFetchTable);
+ h->blockFetchTable = NULL;
+ hpsa_free_reply_queues(h);
+ hpsa_free_ioaccel1_cmd_and_bft(h);
+ hpsa_free_ioaccel2_cmd_and_bft(h);
+}
+
+/* return -ENODEV on error, 0 on success (or no action)
+ * allocates numerous items that must be freed later
+ */
+static int hpsa_put_ctlr_into_performant_mode(struct ctlr_info *h)
{
u32 trans_support;
unsigned long transMethod = CFGTBL_Trans_Performant |
CFGTBL_Trans_use_short_tags;
- int i;
+ int i, rc;
if (hpsa_simple_mode)
- return;
+ return 0;
trans_support = readl(&(h->cfgtable->TransportSupport));
if (!(trans_support & PERFORMANT_MODE))
- return;
+ return 0;
/* Check for I/O accelerator mode support */
if (trans_support & CFGTBL_Trans_io_accel1) {
transMethod |= CFGTBL_Trans_io_accel1 |
CFGTBL_Trans_enable_directed_msix;
- if (hpsa_alloc_ioaccel1_cmd_and_bft(h))
- goto clean_up;
- } else {
- if (trans_support & CFGTBL_Trans_io_accel2) {
- transMethod |= CFGTBL_Trans_io_accel2 |
+ rc = hpsa_alloc_ioaccel1_cmd_and_bft(h);
+ if (rc)
+ return rc;
+ } else if (trans_support & CFGTBL_Trans_io_accel2) {
+ transMethod |= CFGTBL_Trans_io_accel2 |
CFGTBL_Trans_enable_directed_msix;
- if (hpsa_alloc_ioaccel2_cmd_and_bft(h))
- goto clean_up;
- }
+ rc = hpsa_alloc_ioaccel2_cmd_and_bft(h);
+ if (rc)
+ return rc;
}
h->nreply_queues = h->msix_vector > 0 ? h->msix_vector : 1;
@@ -8111,8 +8172,10 @@ static void hpsa_put_ctlr_into_performant_mode(struct ctlr_info *h)
h->reply_queue[i].head = pci_alloc_consistent(h->pdev,
h->reply_queue_size,
&(h->reply_queue[i].busaddr));
- if (!h->reply_queue[i].head)
- goto clean_up;
+ if (!h->reply_queue[i].head) {
+ rc = -ENOMEM;
+ goto clean1; /* rq, ioaccel */
+ }
h->reply_queue[i].size = h->max_commands;
h->reply_queue[i].wraparound = 1; /* spec: init to 1 */
h->reply_queue[i].current_entry = 0;
@@ -8121,15 +8184,24 @@ static void hpsa_put_ctlr_into_performant_mode(struct ctlr_info *h)
/* Need a block fetch table for performant mode */
h->blockFetchTable = kmalloc(((SG_ENTRIES_IN_CMD + 1) *
sizeof(u32)), GFP_KERNEL);
- if (!h->blockFetchTable)
- goto clean_up;
+ if (!h->blockFetchTable) {
+ rc = -ENOMEM;
+ goto clean1; /* rq, ioaccel */
+ }
- hpsa_enter_performant_mode(h, trans_support);
- return;
+ rc = hpsa_enter_performant_mode(h, trans_support);
+ if (rc)
+ goto clean2; /* bft, rq, ioaccel */
+ return 0;
-clean_up:
- hpsa_free_reply_queues(h);
+clean2: /* bft, rq, ioaccel */
kfree(h->blockFetchTable);
+ h->blockFetchTable = NULL;
+clean1: /* rq, ioaccel */
+ hpsa_free_reply_queues(h);
+ hpsa_free_ioaccel1_cmd_and_bft(h);
+ hpsa_free_ioaccel2_cmd_and_bft(h);
+ return rc;
}
static int is_accelerated_cmd(struct CommandList *c)
^ permalink raw reply related [flat|nested] 58+ messages in thread* [PATCH 24/43] hpsa: clean up some error reporting output in abort handler
2015-02-21 22:17 [PATCH 00/43] hpsa updates Don Brace
` (22 preceding siblings ...)
2015-02-21 22:19 ` [PATCH 23/43] hpsa: clean up driver init Don Brace
@ 2015-02-21 22:19 ` Don Brace
2015-02-21 22:19 ` [PATCH 25/43] hpsa: do not print ioaccel2 warning messages about unusual completions Don Brace
` (18 subsequent siblings)
42 siblings, 0 replies; 58+ messages in thread
From: Don Brace @ 2015-02-21 22:19 UTC (permalink / raw)
To: scott.teel, Kevin.Barnett, james.bottomley, hch, Justin.Lindley,
brace
Cc: linux-scsi
From: Robert Elliott <elliott@hp.com>
report more useful information on aborts
Reviewed-by: Scott Teel <scott.teel@pmcs.com>
Reviewed-by: Kevin Barnett <kevin.barnett@pmcs.com>
Signed-off-by: Robert Elliott <elliott@hp.com>
Signed-off-by: Don Brace <don.brace@pmcs.com>
---
drivers/scsi/hpsa.c | 27 ++++++++++++++-------------
1 file changed, 14 insertions(+), 13 deletions(-)
diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index e76fa03..4641cc8 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -5155,9 +5155,9 @@ static int hpsa_eh_abort_handler(struct scsi_cmnd *sc)
return FAILED;
memset(msg, 0, sizeof(msg));
- ml += sprintf(msg+ml, "Aborting command on scsi %d:%d:%d:%llu ",
+ ml += sprintf(msg+ml, "scsi %d:%d:%d:%llu scmd %p ABORT ",
h->scsi_host->host_no, sc->device->channel,
- sc->device->id, sc->device->lun);
+ sc->device->id, sc->device->lun, sc);
/* Find the device of the command to be aborted */
dev = sc->device->hostdata;
@@ -5191,11 +5191,12 @@ static int hpsa_eh_abort_handler(struct scsi_cmnd *sc)
ml += sprintf(msg+ml, "Tag:0x%08x:%08x ", tagupper, taglower);
as = abort->scsi_cmd;
if (as != NULL)
- ml += sprintf(msg+ml, "Command:0x%x SN:0x%lx ",
- as->cmnd[0], as->serial_number);
- dev_dbg(&h->pdev->dev, "%s\n", msg);
- dev_warn(&h->pdev->dev, "Aborting command on scsi %d:%d:%d:%d\n",
- h->scsi_host->host_no, dev->bus, dev->target, dev->lun);
+ ml += sprintf(msg+ml,
+ "CDBLen: %d CDB: 0x%02x%02x... SN: 0x%lx ",
+ as->cmd_len, as->cmnd[0], as->cmnd[1],
+ as->serial_number);
+ dev_warn(&h->pdev->dev, "%s BEING SENT\n", msg);
+
/*
* Command is in flight, or possibly already completed
* by the firmware (but not to the scsi mid layer) but we can't
@@ -5203,7 +5204,8 @@ static int hpsa_eh_abort_handler(struct scsi_cmnd *sc)
*/
if (wait_for_available_abort_cmd(h)) {
dev_warn(&h->pdev->dev,
- "Timed out waiting for an abort command to become available.\n");
+ "%s FAILED, timeout waiting for an abort command to become available.\n",
+ msg);
cmd_free(h, abort);
return FAILED;
}
@@ -5211,15 +5213,14 @@ static int hpsa_eh_abort_handler(struct scsi_cmnd *sc)
atomic_inc(&h->abort_cmds_available);
wake_up_all(&h->abort_cmd_wait_queue);
if (rc != 0) {
- dev_warn(&h->pdev->dev, "FAILED abort command on scsi %d:%d:%d:%d\n",
- h->scsi_host->host_no,
- dev->bus, dev->target, dev->lun);
+ dev_warn(&h->pdev->dev, "%s SENT, FAILED\n", msg);
cmd_free(h, abort);
return FAILED;
}
- dev_info(&h->pdev->dev, "%s REQUEST SUCCEEDED.\n", msg);
+ dev_info(&h->pdev->dev, "%s SENT, SUCCESS\n", msg);
- /* If the abort(s) above completed and actually aborted the
+ /*
+ * If the abort(s) above completed and actually aborted the
* command, then the command to be aborted should already be
* completed. If not, wait around a bit more to see if they
* manage to complete normally.
^ permalink raw reply related [flat|nested] 58+ messages in thread* [PATCH 25/43] hpsa: do not print ioaccel2 warning messages about unusual completions.
2015-02-21 22:17 [PATCH 00/43] hpsa updates Don Brace
` (23 preceding siblings ...)
2015-02-21 22:19 ` [PATCH 24/43] hpsa: clean up some error reporting output in abort handler Don Brace
@ 2015-02-21 22:19 ` Don Brace
2015-02-21 22:19 ` [PATCH 26/43] hpsa: add support sending aborts to physical devices via the ioaccel2 path Don Brace
` (17 subsequent siblings)
42 siblings, 0 replies; 58+ messages in thread
From: Don Brace @ 2015-02-21 22:19 UTC (permalink / raw)
To: scott.teel, Kevin.Barnett, james.bottomley, hch, Justin.Lindley,
brace
Cc: linux-scsi
From: Robert Elliott <elliott@hp.com>
The SCSI midlayer already prints more detail about completions,
and has logging level options to filter them if not wanted.
These just slow down the system if a lot of errors occur,
stressing error handling even more.
Reviewed-by: Scott Teel <scott.teel@pmcs.com>
Reviewed-by: Kevin Barnett <kevin.barnett@pmcs.com>
Signed-off-by: Robert Elliott <elliott@hp.com>
Signed-off-by: Don Brace <don.brace@pmcs.com>
---
drivers/scsi/hpsa.c | 24 ------------------------
1 file changed, 24 deletions(-)
diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index 4641cc8..bbbc309 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -1922,9 +1922,6 @@ static int handle_ioaccel_mode2_error(struct ctlr_info *h,
case IOACCEL2_STATUS_SR_TASK_COMP_GOOD:
break;
case IOACCEL2_STATUS_SR_TASK_COMP_CHK_COND:
- dev_warn(&h->pdev->dev,
- "%s: task complete with check condition.\n",
- "HP SSD Smart Path");
cmd->result |= SAM_STAT_CHECK_CONDITION;
if (c2->error_data.data_present !=
IOACCEL2_SENSE_DATA_PRESENT) {
@@ -1944,30 +1941,18 @@ static int handle_ioaccel_mode2_error(struct ctlr_info *h,
retry = 1;
break;
case IOACCEL2_STATUS_SR_TASK_COMP_BUSY:
- dev_warn(&h->pdev->dev,
- "%s: task complete with BUSY status.\n",
- "HP SSD Smart Path");
retry = 1;
break;
case IOACCEL2_STATUS_SR_TASK_COMP_RES_CON:
- dev_warn(&h->pdev->dev,
- "%s: task complete with reservation conflict.\n",
- "HP SSD Smart Path");
retry = 1;
break;
case IOACCEL2_STATUS_SR_TASK_COMP_SET_FULL:
retry = 1;
break;
case IOACCEL2_STATUS_SR_TASK_COMP_ABORTED:
- dev_warn(&h->pdev->dev,
- "%s: task complete with aborted status.\n",
- "HP SSD Smart Path");
retry = 1;
break;
default:
- dev_warn(&h->pdev->dev,
- "%s: task complete with unrecognized status: 0x%02x\n",
- "HP SSD Smart Path", c2->error_data.status);
retry = 1;
break;
}
@@ -1996,9 +1981,6 @@ static int handle_ioaccel_mode2_error(struct ctlr_info *h,
break;
default:
retry = 1;
- dev_warn(&h->pdev->dev,
- "unexpected delivery or target failure, status = 0x%02x\n",
- c2->error_data.status);
}
break;
case IOACCEL2_SERV_RESPONSE_TMF_COMPLETE:
@@ -2006,17 +1988,11 @@ static int handle_ioaccel_mode2_error(struct ctlr_info *h,
case IOACCEL2_SERV_RESPONSE_TMF_SUCCESS:
break;
case IOACCEL2_SERV_RESPONSE_TMF_REJECTED:
- dev_warn(&h->pdev->dev, "task management function rejected.\n");
retry = 1;
break;
case IOACCEL2_SERV_RESPONSE_TMF_WRONG_LUN:
- dev_warn(&h->pdev->dev, "task management function invalid LUN\n");
break;
default:
- dev_warn(&h->pdev->dev,
- "%s: Unrecognized server response: 0x%02x\n",
- "HP SSD Smart Path",
- c2->error_data.serv_response);
retry = 1;
break;
}
^ permalink raw reply related [flat|nested] 58+ messages in thread* [PATCH 26/43] hpsa: add support sending aborts to physical devices via the ioaccel2 path
2015-02-21 22:17 [PATCH 00/43] hpsa updates Don Brace
` (24 preceding siblings ...)
2015-02-21 22:19 ` [PATCH 25/43] hpsa: do not print ioaccel2 warning messages about unusual completions Don Brace
@ 2015-02-21 22:19 ` Don Brace
2015-02-21 22:19 ` [PATCH 27/43] hpsa: use helper routines for finishing commands Don Brace
` (16 subsequent siblings)
42 siblings, 0 replies; 58+ messages in thread
From: Don Brace @ 2015-02-21 22:19 UTC (permalink / raw)
To: scott.teel, Kevin.Barnett, james.bottomley, hch, Justin.Lindley,
brace
Cc: linux-scsi
From: Stephen Cameron <stephenmcameron@gmail.com>
add support for tmf when in ioaccel2 mode
Reviewed-by: Scott Teel <scott.teel@pmcs.com>
Reviewed-by: Kevin Barnett <kevin.barnett@pmcs.com>
Signed-off-by: Joe Handzik <joseph.t.handzik@hp.com>
Signed-off-by: Don Brace <don.brace@pmcs.com>
---
drivers/scsi/hpsa.c | 136 +++++++++++++++++++++++++++++++++++++++++++++--
drivers/scsi/hpsa.h | 1
drivers/scsi/hpsa_cmd.h | 6 +-
3 files changed, 135 insertions(+), 8 deletions(-)
diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index bbbc309..14e5973 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -868,6 +868,28 @@ static void set_ioaccel1_performant_mode(struct ctlr_info *h,
IOACCEL1_BUSADDR_CMDTYPE;
}
+static void set_ioaccel2_tmf_performant_mode(struct ctlr_info *h,
+ struct CommandList *c,
+ int reply_queue)
+{
+ struct hpsa_tmf_struct *cp = (struct hpsa_tmf_struct *)
+ &h->ioaccel2_cmd_pool[c->cmdindex];
+
+ /* Tell the controller to post the reply to the queue for this
+ * processor. This seems to give the best I/O throughput.
+ */
+ if (likely(reply_queue == DEFAULT_REPLY_QUEUE))
+ cp->reply_queue = smp_processor_id() % h->nreply_queues;
+ else
+ cp->reply_queue = reply_queue % h->nreply_queues;
+ /* Set the bits in the address sent down to include:
+ * - performant mode bit not used in ioaccel mode 2
+ * - pull count (bits 0-3)
+ * - command type isn't needed for ioaccel2
+ */
+ c->busaddr |= h->ioaccel2_blockFetchTable[0];
+}
+
static void set_ioaccel2_performant_mode(struct ctlr_info *h,
struct CommandList *c,
int reply_queue)
@@ -934,6 +956,10 @@ static void __enqueue_cmd_and_start_io(struct ctlr_info *h,
set_ioaccel2_performant_mode(h, c, reply_queue);
writel(c->busaddr, h->vaddr + IOACCEL2_INBOUND_POSTQ_32);
break;
+ case IOACCEL2_TMF:
+ set_ioaccel2_tmf_performant_mode(h, c, reply_queue);
+ writel(c->busaddr, h->vaddr + IOACCEL2_INBOUND_POSTQ_32);
+ break;
default:
set_performant_mode(h, c, reply_queue);
h->access.submit_command(h, c);
@@ -4970,6 +4996,47 @@ static int hpsa_send_abort(struct ctlr_info *h, unsigned char *scsi3addr,
return rc;
}
+static void setup_ioaccel2_abort_cmd(struct CommandList *c, struct ctlr_info *h,
+ struct CommandList *command_to_abort, int reply_queue)
+{
+ struct io_accel2_cmd *c2 = &h->ioaccel2_cmd_pool[c->cmdindex];
+ struct hpsa_tmf_struct *ac = (struct hpsa_tmf_struct *) c2;
+ struct io_accel2_cmd *c2a =
+ &h->ioaccel2_cmd_pool[command_to_abort->cmdindex];
+ struct scsi_cmnd *scmd =
+ (struct scsi_cmnd *) command_to_abort->scsi_cmd;
+ struct hpsa_scsi_dev_t *dev = scmd->device->hostdata;
+
+ /*
+ * We're overlaying struct hpsa_tmf_struct on top of something which
+ * was allocated as a struct io_accel2_cmd, so we better be sure it
+ * actually fits, and doesn't overrun the error info space.
+ */
+ BUILD_BUG_ON(sizeof(struct hpsa_tmf_struct) >
+ sizeof(struct io_accel2_cmd));
+ BUG_ON(offsetof(struct io_accel2_cmd, error_data) <
+ offsetof(struct hpsa_tmf_struct, error_len) +
+ sizeof(ac->error_len));
+
+ c->cmd_type = IOACCEL2_TMF;
+ /* Adjust the DMA address to point to the accelerated command buffer */
+ c->busaddr = (u32) h->ioaccel2_cmd_pool_dhandle +
+ (c->cmdindex * sizeof(struct io_accel2_cmd));
+ BUG_ON(c->busaddr & 0x0000007F);
+
+ memset(ac, 0, sizeof(*c2)); /* yes this is correct */
+ ac->iu_type = IOACCEL2_IU_TMF_TYPE;
+ ac->reply_queue = reply_queue;
+ ac->tmf = IOACCEL2_TMF_ABORT;
+ ac->it_nexus = cpu_to_le32(dev->ioaccel_handle);
+ memset(ac->lun_id, 0, sizeof(ac->lun_id));
+ ac->tag = cpu_to_le64(c->cmdindex << DIRECT_LOOKUP_SHIFT);
+ ac->abort_tag = cpu_to_le64(le32_to_cpu(c2a->Tag));
+ ac->error_ptr = cpu_to_le64(c->busaddr +
+ offsetof(struct io_accel2_cmd, error_data));
+ ac->error_len = cpu_to_le32(sizeof(c2->error_data));
+}
+
/* ioaccel2 path firmware cannot handle abort task requests.
* Change abort requests to physical target reset, and send to the
* address of the physical disk used for the ioaccel 2 command.
@@ -5047,17 +5114,72 @@ static int hpsa_send_reset_as_abort_ioaccel2(struct ctlr_info *h,
return rc; /* success */
}
+static int hpsa_send_abort_ioaccel2(struct ctlr_info *h,
+ struct CommandList *abort, int reply_queue)
+{
+ int rc = IO_OK;
+ struct CommandList *c;
+ __le32 taglower, tagupper;
+ struct hpsa_scsi_dev_t *dev;
+ struct io_accel2_cmd *c2;
+
+ dev = abort->scsi_cmd->device->hostdata;
+ if (!dev->offload_enabled && !dev->hba_ioaccel_enabled)
+ return -1;
+
+ c = cmd_alloc(h);
+ setup_ioaccel2_abort_cmd(c, h, abort, reply_queue);
+ c2 = &h->ioaccel2_cmd_pool[c->cmdindex];
+ (void) hpsa_scsi_do_simple_cmd(h, c, reply_queue, NO_TIMEOUT);
+ hpsa_get_tag(h, abort, &taglower, &tagupper);
+ dev_dbg(&h->pdev->dev,
+ "%s: Tag:0x%08x:%08x: do_simple_cmd(ioaccel2 abort) completed.\n",
+ __func__, tagupper, taglower);
+ /* no unmap needed here because no data xfer. */
+
+ dev_dbg(&h->pdev->dev,
+ "%s: Tag:0x%08x:%08x: abort service response = 0x%02x.\n",
+ __func__, tagupper, taglower, c2->error_data.serv_response);
+ switch (c2->error_data.serv_response) {
+ case IOACCEL2_SERV_RESPONSE_TMF_COMPLETE:
+ case IOACCEL2_SERV_RESPONSE_TMF_SUCCESS:
+ rc = 0;
+ break;
+ case IOACCEL2_SERV_RESPONSE_TMF_REJECTED:
+ case IOACCEL2_SERV_RESPONSE_FAILURE:
+ case IOACCEL2_SERV_RESPONSE_TMF_WRONG_LUN:
+ rc = -1;
+ break;
+ default:
+ dev_warn(&h->pdev->dev,
+ "%s: Tag:0x%08x:%08x: unknown abort service response 0x%02x\n",
+ __func__, tagupper, taglower,
+ c2->error_data.serv_response);
+ rc = -1;
+ }
+ cmd_free(h, c);
+ dev_dbg(&h->pdev->dev, "%s: Tag:0x%08x:%08x: Finished.\n", __func__,
+ tagupper, taglower);
+ return rc;
+}
+
static int hpsa_send_abort_both_ways(struct ctlr_info *h,
unsigned char *scsi3addr, struct CommandList *abort, int reply_queue)
{
- /* ioccelerator mode 2 commands should be aborted via the
+ /*
+ * ioccelerator mode 2 commands should be aborted via the
* accelerated path, since RAID path is unaware of these commands,
- * but underlying firmware can't handle abort TMF.
- * Change abort to physical device reset.
+ * but not all underlying firmware can handle abort TMF.
+ * Change abort to physical device reset when abort TMF is unsupported.
*/
- if (abort->cmd_type == CMD_IOACCEL2)
- return hpsa_send_reset_as_abort_ioaccel2(h, scsi3addr,
+ if (abort->cmd_type == CMD_IOACCEL2) {
+ if (HPSATMF_IOACCEL_ENABLED & h->TMFSupportFlags)
+ return hpsa_send_abort_ioaccel2(h, abort,
+ reply_queue);
+ else
+ return hpsa_send_reset_as_abort_ioaccel2(h, scsi3addr,
abort, reply_queue);
+ }
return hpsa_send_abort(h, scsi3addr, abort, reply_queue);
}
@@ -5941,7 +6063,7 @@ static inline void finish_cmd(struct CommandList *c)
if (likely(c->cmd_type == CMD_IOACCEL1 || c->cmd_type == CMD_SCSI
|| c->cmd_type == CMD_IOACCEL2))
complete_scsi_command(c);
- else if (c->cmd_type == CMD_IOCTL_PEND)
+ else if (c->cmd_type == CMD_IOCTL_PEND || c->cmd_type == IOACCEL2_TMF)
complete(c->waiting);
}
@@ -6730,6 +6852,8 @@ static void hpsa_find_board_params(struct ctlr_info *h)
dev_warn(&h->pdev->dev, "Physical aborts not supported\n");
if (!(HPSATMF_LOG_TASK_ABORT & h->TMFSupportFlags))
dev_warn(&h->pdev->dev, "Logical aborts not supported\n");
+ if (!(HPSATMF_IOACCEL_ENABLED & h->TMFSupportFlags))
+ dev_warn(&h->pdev->dev, "HP SSD Smart Path aborts not supported\n");
}
static inline bool hpsa_CISS_signature_present(struct ctlr_info *h)
diff --git a/drivers/scsi/hpsa.h b/drivers/scsi/hpsa.h
index 3acacf6..28b5d79 100644
--- a/drivers/scsi/hpsa.h
+++ b/drivers/scsi/hpsa.h
@@ -231,6 +231,7 @@ struct ctlr_info {
#define HPSATMF_PHYS_QRY_TASK (1 << 7)
#define HPSATMF_PHYS_QRY_TSET (1 << 8)
#define HPSATMF_PHYS_QRY_ASYNC (1 << 9)
+#define HPSATMF_IOACCEL_ENABLED (1 << 15)
#define HPSATMF_MASK_SUPPORTED (1 << 16)
#define HPSATMF_LOG_LUN_RESET (1 << 17)
#define HPSATMF_LOG_NEX_RESET (1 << 18)
diff --git a/drivers/scsi/hpsa_cmd.h b/drivers/scsi/hpsa_cmd.h
index cecb62b..3719592 100644
--- a/drivers/scsi/hpsa_cmd.h
+++ b/drivers/scsi/hpsa_cmd.h
@@ -396,6 +396,7 @@ struct ErrorInfo {
#define CMD_SCSI 0x03
#define CMD_IOACCEL1 0x04
#define CMD_IOACCEL2 0x05
+#define IOACCEL2_TMF 0x06
#define DIRECT_LOOKUP_SHIFT 4
#define DIRECT_LOOKUP_MASK (~((1 << DIRECT_LOOKUP_SHIFT) - 1))
@@ -590,6 +591,7 @@ struct io_accel2_cmd {
#define IOACCEL2_DIR_NO_DATA 0x00
#define IOACCEL2_DIR_DATA_IN 0x01
#define IOACCEL2_DIR_DATA_OUT 0x02
+#define IOACCEL2_TMF_ABORT 0x01
/*
* SCSI Task Management Request format for Accelerator Mode 2
*/
@@ -598,13 +600,13 @@ struct hpsa_tmf_struct {
u8 reply_queue; /* Reply Queue ID */
u8 tmf; /* Task Management Function */
u8 reserved1; /* byte 3 Reserved */
- u32 it_nexus; /* SCSI I-T Nexus */
+ __le32 it_nexus; /* SCSI I-T Nexus */
u8 lun_id[8]; /* LUN ID for TMF request */
__le64 tag; /* cciss tag associated w/ request */
__le64 abort_tag; /* cciss tag of SCSI cmd or TMF to abort */
__le64 error_ptr; /* Error Pointer */
__le32 error_len; /* Error Length */
-};
+} __aligned(IOACCEL2_COMMANDLIST_ALIGNMENT);
/* Configuration Table Structure */
struct HostWrite {
^ permalink raw reply related [flat|nested] 58+ messages in thread* [PATCH 27/43] hpsa: use helper routines for finishing commands
2015-02-21 22:17 [PATCH 00/43] hpsa updates Don Brace
` (25 preceding siblings ...)
2015-02-21 22:19 ` [PATCH 26/43] hpsa: add support sending aborts to physical devices via the ioaccel2 path Don Brace
@ 2015-02-21 22:19 ` Don Brace
2015-02-21 22:20 ` [PATCH 28/43] hpsa: don't return abort request until target is complete Don Brace
` (15 subsequent siblings)
42 siblings, 0 replies; 58+ messages in thread
From: Don Brace @ 2015-02-21 22:19 UTC (permalink / raw)
To: scott.teel, Kevin.Barnett, james.bottomley, hch, Justin.Lindley,
brace
Cc: linux-scsi
From: Webb Scales <webbnh@hp.com>
cleanup command completions
Reviewed-by: Scott Teel <scott.teel@pmcs.com>
Reviewed-by: Kevin Barnett <kevin.barnett@pmcs.com>
Signed-off-by: Webb Scales <webbnh@hp.com>
Signed-off-by: Don Brace <don.brace@pmcs.com>
---
drivers/scsi/hpsa.c | 78 ++++++++++++++++++++-------------------------------
1 file changed, 31 insertions(+), 47 deletions(-)
diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index 14e5973..29a86b3 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -2026,6 +2026,19 @@ static int handle_ioaccel_mode2_error(struct ctlr_info *h,
return retry; /* retry on raid path? */
}
+static void hpsa_cmd_free_and_done(struct ctlr_info *h,
+ struct CommandList *c, struct scsi_cmnd *cmd)
+{
+ cmd_free(h, c);
+ cmd->scsi_done(cmd);
+}
+
+static void hpsa_retry_cmd(struct ctlr_info *h, struct CommandList *c)
+{
+ INIT_WORK(&c->work, hpsa_command_resubmit_worker);
+ queue_work_on(raw_smp_processor_id(), h->resubmit_wq, &c->work);
+}
+
static void process_ioaccel2_completion(struct ctlr_info *h,
struct CommandList *c, struct scsi_cmnd *cmd,
struct hpsa_scsi_dev_t *dev)
@@ -2034,13 +2047,11 @@ static void process_ioaccel2_completion(struct ctlr_info *h,
/* check for good status */
if (likely(c2->error_data.serv_response == 0 &&
- c2->error_data.status == 0)) {
- cmd_free(h, c);
- cmd->scsi_done(cmd);
- return;
- }
+ c2->error_data.status == 0))
+ return hpsa_cmd_free_and_done(h, c, cmd);
- /* Any RAID offload error results in retry which will use
+ /*
+ * Any RAID offload error results in retry which will use
* the normal I/O path so the controller can handle whatever's
* wrong.
*/
@@ -2050,19 +2061,14 @@ static void process_ioaccel2_completion(struct ctlr_info *h,
if (c2->error_data.status ==
IOACCEL2_STATUS_SR_IOACCEL_DISABLED)
dev->offload_enabled = 0;
- goto retry_cmd;
+
+ return hpsa_retry_cmd(h, c);
}
if (handle_ioaccel_mode2_error(h, c, cmd, c2))
- goto retry_cmd;
-
- cmd_free(h, c);
- cmd->scsi_done(cmd);
- return;
+ return hpsa_retry_cmd(h, c);
-retry_cmd:
- INIT_WORK(&c->work, hpsa_command_resubmit_worker);
- queue_work_on(raw_smp_processor_id(), h->resubmit_wq, &c->work);
+ return hpsa_cmd_free_and_done(h, c, cmd);
}
/* Returns 0 on success, < 0 otherwise. */
@@ -2135,22 +2141,15 @@ static void complete_scsi_command(struct CommandList *cp)
if (unlikely(ei->CommandStatus == CMD_CTLR_LOCKUP)) {
/* DID_NO_CONNECT will prevent a retry */
cmd->result = DID_NO_CONNECT << 16;
- cmd_free(h, cp);
- cmd->scsi_done(cmd);
- return;
+ return hpsa_cmd_free_and_done(h, cp, cmd);
}
if (cp->cmd_type == CMD_IOACCEL2)
return process_ioaccel2_completion(h, cp, cmd, dev);
scsi_set_resid(cmd, ei->ResidualCnt);
- if (ei->CommandStatus == 0) {
- if (cp->cmd_type == CMD_IOACCEL1)
- atomic_dec(&cp->phys_disk->ioaccel_cmds_out);
- cmd_free(h, cp);
- cmd->scsi_done(cmd);
- return;
- }
+ if (ei->CommandStatus == 0)
+ return hpsa_cmd_free_and_done(h, cp, cmd);
/* For I/O accelerator commands, copy over some fields to the normal
* CISS header used below for error handling.
@@ -2172,10 +2171,7 @@ static void complete_scsi_command(struct CommandList *cp)
if (is_logical_dev_addr_mode(dev->scsi3addr)) {
if (ei->CommandStatus == CMD_IOACCEL_DISABLED)
dev->offload_enabled = 0;
- INIT_WORK(&cp->work, hpsa_command_resubmit_worker);
- queue_work_on(raw_smp_processor_id(),
- h->resubmit_wq, &cp->work);
- return;
+ return hpsa_retry_cmd(h, cp);
}
}
@@ -2306,8 +2302,8 @@ static void complete_scsi_command(struct CommandList *cp)
dev_warn(&h->pdev->dev, "cp %p returned unknown status %x\n",
cp, ei->CommandStatus);
}
- cmd_free(h, cp);
- cmd->scsi_done(cmd);
+
+ return hpsa_cmd_free_and_done(h, cp, cmd);
}
static void hpsa_pci_unmap(struct pci_dev *pdev,
@@ -4560,16 +4556,13 @@ static void hpsa_command_resubmit_worker(struct work_struct *work)
{
struct scsi_cmnd *cmd;
struct hpsa_scsi_dev_t *dev;
- struct CommandList *c =
- container_of(work, struct CommandList, work);
+ struct CommandList *c = container_of(work, struct CommandList, work);
cmd = c->scsi_cmd;
dev = cmd->device->hostdata;
if (!dev) {
cmd->result = DID_NO_CONNECT << 16;
- cmd_free(c->h, c);
- cmd->scsi_done(cmd);
- return;
+ return hpsa_cmd_free_and_done(c->h, c, cmd);
}
if (c->cmd_type == CMD_IOACCEL2) {
struct ctlr_info *h = c->h;
@@ -4588,12 +4581,7 @@ static void hpsa_command_resubmit_worker(struct work_struct *work)
* then get SCSI_MLQUEUE_HOST_BUSY.
*/
cmd->result = DID_IMM_RETRY << 16;
- cmd->scsi_done(cmd);
- cmd_free(h, c); /* FIX-ME: on merge, change
- * to cmd_tagged_free() and
- * ultimately to
- * hpsa_cmd_free_and_done(). */
- return;
+ return hpsa_cmd_free_and_done(h, c, cmd);
}
/* else, fall thru and resubmit down CISS path */
}
@@ -4657,9 +4645,7 @@ static int hpsa_scsi_queue_command(struct Scsi_Host *sh, struct scsi_cmnd *cmd)
if (rc == 0)
return 0;
if (rc == SCSI_MLQUEUE_HOST_BUSY) {
- cmd_free(h, c); /* FIX-ME: on merge, change to
- * cmd_tagged_free(), and ultimately
- * to hpsa_cmd_resolve_and_free(). */
+ cmd_free(h, c);
return SCSI_MLQUEUE_HOST_BUSY;
}
}
@@ -7777,8 +7763,6 @@ static void hpsa_flush_cache(struct ctlr_info *h)
struct CommandList *c;
int rc;
- /* Don't bother trying to flush the cache if locked up */
- /* FIXME not necessary if do_simple_cmd does the check */
if (unlikely(lockup_detected(h)))
return;
flush_buf = kzalloc(4, GFP_KERNEL);
^ permalink raw reply related [flat|nested] 58+ messages in thread* [PATCH 28/43] hpsa: don't return abort request until target is complete
2015-02-21 22:17 [PATCH 00/43] hpsa updates Don Brace
` (26 preceding siblings ...)
2015-02-21 22:19 ` [PATCH 27/43] hpsa: use helper routines for finishing commands Don Brace
@ 2015-02-21 22:20 ` Don Brace
2015-02-21 22:20 ` [PATCH 29/43] hpsa: refactor and rework support for sending TEST_UNIT_READY Don Brace
` (14 subsequent siblings)
42 siblings, 0 replies; 58+ messages in thread
From: Don Brace @ 2015-02-21 22:20 UTC (permalink / raw)
To: scott.teel, Kevin.Barnett, james.bottomley, hch, Justin.Lindley,
brace
Cc: linux-scsi
From: Webb Scales <webbnh@hp.com>
Don't return from the abort request until the target command is complete.
Mark outstanding commands which have a pending abort, and do not send them
to the host if we can avoid it.
If the current command has been aborted, do not call the SCSI command
completion routine from the I/O path: when the abort returns successfully,
the SCSI mid-layer will handle the completion implicitly.
The following race was possible in theory.
1. LLD is requested to abort a scsi command
2. scsi command completes
3. The struct CommandList associated with 2 is made available.
4. new io request to LLD to another LUN re-uses struct CommandList
5. abort handler follows scsi_cmnd->host_scribble and
finds struct CommandList and tries to aborts it.
Now we have aborted the wrong command.
Fix by resetting the scsi_cmd field of struct CommandList
upon completion and making the abort handler check that
the scsi_cmd pointer in the CommadList struct matches the
scsi_cmnd that it has been asked to abort.
Reviewed-by: Scott Teel <scott.teel@pmcs.com>
Reviewed-by: Kevin Barnett <kevin.barnett@pmcs.com>
Signed-off-by: Webb Scales <webbnh@hp.com>
Signed-off-by: Don Brace <don.brace@pmcs.com>
---
drivers/scsi/hpsa.c | 120 +++++++++++++++++++++++++++++++++++------------
drivers/scsi/hpsa.h | 1
drivers/scsi/hpsa_cmd.h | 2 +
3 files changed, 93 insertions(+), 30 deletions(-)
diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index 29a86b3..6676517 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -194,6 +194,10 @@ static struct board_type products[] = {
{0xFFFF103C, "Unknown Smart Array", &SA5_access},
};
+#define SCSI_CMD_BUSY ((struct scsi_cmnd *)&hpsa_cmd_busy)
+static const struct scsi_cmnd hpsa_cmd_busy;
+#define SCSI_CMD_IDLE ((struct scsi_cmnd *)&hpsa_cmd_idle)
+static const struct scsi_cmnd hpsa_cmd_idle;
static int number_of_controllers;
static irqreturn_t do_hpsa_intr_intx(int irq, void *dev_id);
@@ -269,6 +273,11 @@ static inline struct ctlr_info *shost_to_hba(struct Scsi_Host *sh)
return (struct ctlr_info *) *priv;
}
+static inline bool hpsa_is_cmd_idle(struct CommandList *c)
+{
+ return c->scsi_cmd == SCSI_CMD_IDLE;
+}
+
/* extract sense key, asc, and ascq from sense data. -1 means invalid. */
static void decode_sense_data(const u8 *sense_data, int sense_data_len,
int *sense_key, int *asc, int *ascq)
@@ -966,9 +975,11 @@ static void __enqueue_cmd_and_start_io(struct ctlr_info *h,
}
}
-static void enqueue_cmd_and_start_io(struct ctlr_info *h,
- struct CommandList *c)
+static void enqueue_cmd_and_start_io(struct ctlr_info *h, struct CommandList *c)
{
+ if (unlikely(c->abort_pending))
+ return finish_cmd(c);
+
__enqueue_cmd_and_start_io(h, c, DEFAULT_REPLY_QUEUE);
}
@@ -2026,9 +2037,36 @@ static int handle_ioaccel_mode2_error(struct ctlr_info *h,
return retry; /* retry on raid path? */
}
+static void hpsa_cmd_resolve_events(struct ctlr_info *h,
+ struct CommandList *c)
+{
+ /*
+ * Prevent the following race in the abort handler:
+ *
+ * 1. LLD is requested to abort a SCSI command
+ * 2. The SCSI command completes
+ * 3. The struct CommandList associated with step 2 is made available
+ * 4. New I/O request to LLD to another LUN re-uses struct CommandList
+ * 5. Abort handler follows scsi_cmnd->host_scribble and
+ * finds struct CommandList and tries to aborts it
+ * Now we have aborted the wrong command.
+ *
+ * Clear c->scsi_cmd here so that the abort handler will know this
+ * command has completed. Then, check to see if the abort handler is
+ * waiting for this command, and, if so, wake it.
+ */
+ c->scsi_cmd = SCSI_CMD_IDLE;
+ mb(); /* Ensure c->scsi_cmd is set to SCSI_CMD_IDLE */
+ if (c->abort_pending) {
+ c->abort_pending = false;
+ wake_up_all(&h->abort_sync_wait_queue);
+ }
+}
+
static void hpsa_cmd_free_and_done(struct ctlr_info *h,
struct CommandList *c, struct scsi_cmnd *cmd)
{
+ hpsa_cmd_resolve_events(h, c);
cmd_free(h, c);
cmd->scsi_done(cmd);
}
@@ -2039,6 +2077,21 @@ static void hpsa_retry_cmd(struct ctlr_info *h, struct CommandList *c)
queue_work_on(raw_smp_processor_id(), h->resubmit_wq, &c->work);
}
+static void hpsa_set_scsi_cmd_aborted(struct scsi_cmnd *cmd)
+{
+ cmd->result = DID_ABORT << 16;
+}
+
+static void hpsa_cmd_abort_and_free(struct ctlr_info *h, struct CommandList *c,
+ struct scsi_cmnd *cmd)
+{
+ hpsa_set_scsi_cmd_aborted(cmd);
+ dev_warn(&h->pdev->dev, "CDB %16phN was aborted with status 0x%x\n",
+ c->Request.CDB, c->err_info->ScsiStatus);
+ hpsa_cmd_resolve_events(h, c);
+ cmd_free(h, c); /* FIX-ME: change to cmd_tagged_free(h, c) */
+}
+
static void process_ioaccel2_completion(struct ctlr_info *h,
struct CommandList *c, struct scsi_cmnd *cmd,
struct hpsa_scsi_dev_t *dev)
@@ -2050,6 +2103,10 @@ static void process_ioaccel2_completion(struct ctlr_info *h,
c2->error_data.status == 0))
return hpsa_cmd_free_and_done(h, c, cmd);
+ /* don't requeue a command which is being aborted */
+ if (unlikely(c->abort_pending))
+ return hpsa_cmd_abort_and_free(h, c, cmd);
+
/*
* Any RAID offload error results in retry which will use
* the normal I/O path so the controller can handle whatever's
@@ -2171,10 +2228,14 @@ static void complete_scsi_command(struct CommandList *cp)
if (is_logical_dev_addr_mode(dev->scsi3addr)) {
if (ei->CommandStatus == CMD_IOACCEL_DISABLED)
dev->offload_enabled = 0;
- return hpsa_retry_cmd(h, cp);
+ if (!cp->abort_pending)
+ return hpsa_retry_cmd(h, cp);
}
}
+ if (cp->abort_pending)
+ ei->CommandStatus = CMD_ABORTED;
+
/* an error has occurred */
switch (ei->CommandStatus) {
@@ -2262,10 +2323,8 @@ static void complete_scsi_command(struct CommandList *cp)
cp->Request.CDB);
break;
case CMD_ABORTED:
- cmd->result = DID_ABORT << 16;
- dev_warn(&h->pdev->dev, "CDB %16phN was aborted with status 0x%x\n",
- cp->Request.CDB, ei->ScsiStatus);
- break;
+ /* Return now to avoid calling scsi_done(). */
+ return hpsa_cmd_abort_and_free(h, cp, cmd);
case CMD_ABORT_FAILED:
cmd->result = DID_ERROR << 16;
dev_warn(&h->pdev->dev, "CDB %16phN : abort failed\n",
@@ -4501,6 +4560,7 @@ static void hpsa_cmd_init(struct ctlr_info *h, int index,
c->ErrDesc.Addr = cpu_to_le64((u64) err_dma_handle);
c->ErrDesc.Len = cpu_to_le32((u32) sizeof(*c->err_info));
c->h = h;
+ c->scsi_cmd = SCSI_CMD_IDLE;
}
static void hpsa_preinitialize_commands(struct ctlr_info *h)
@@ -4564,6 +4624,8 @@ static void hpsa_command_resubmit_worker(struct work_struct *work)
cmd->result = DID_NO_CONNECT << 16;
return hpsa_cmd_free_and_done(c->h, c, cmd);
}
+ if (c->abort_pending)
+ return hpsa_cmd_abort_and_free(c->h, c, cmd);
if (c->cmd_type == CMD_IOACCEL2) {
struct ctlr_info *h = c->h;
struct io_accel2_cmd *c2 = &h->ioaccel2_cmd_pool[c->cmdindex];
@@ -4989,8 +5051,7 @@ static void setup_ioaccel2_abort_cmd(struct CommandList *c, struct ctlr_info *h,
struct hpsa_tmf_struct *ac = (struct hpsa_tmf_struct *) c2;
struct io_accel2_cmd *c2a =
&h->ioaccel2_cmd_pool[command_to_abort->cmdindex];
- struct scsi_cmnd *scmd =
- (struct scsi_cmnd *) command_to_abort->scsi_cmd;
+ struct scsi_cmnd *scmd = command_to_abort->scsi_cmd;
struct hpsa_scsi_dev_t *dev = scmd->device->hostdata;
/*
@@ -5005,6 +5066,8 @@ static void setup_ioaccel2_abort_cmd(struct CommandList *c, struct ctlr_info *h,
sizeof(ac->error_len));
c->cmd_type = IOACCEL2_TMF;
+ c->scsi_cmd = SCSI_CMD_BUSY;
+
/* Adjust the DMA address to point to the accelerated command buffer */
c->busaddr = (u32) h->ioaccel2_cmd_pool_dhandle +
(c->cmdindex * sizeof(struct io_accel2_cmd));
@@ -5197,7 +5260,7 @@ static inline int wait_for_available_abort_cmd(struct ctlr_info *h)
static int hpsa_eh_abort_handler(struct scsi_cmnd *sc)
{
- int i, rc;
+ int rc;
struct ctlr_info *h;
struct hpsa_scsi_dev_t *dev;
struct CommandList *abort; /* pointer to command to be aborted */
@@ -5270,6 +5333,16 @@ static int hpsa_eh_abort_handler(struct scsi_cmnd *sc)
return FAILED;
}
+ /*
+ * Check that we're aborting the right command.
+ * It's possible the CommandList already completed and got re-used.
+ */
+ if (abort->scsi_cmd != sc) {
+ cmd_free(h, abort);
+ return SUCCESS;
+ }
+
+ abort->abort_pending = true;
hpsa_get_tag(h, abort, &taglower, &tagupper);
reply_queue = hpsa_extract_reply_queue(h, abort);
ml += sprintf(msg+ml, "Tag:0x%08x:%08x ", tagupper, taglower);
@@ -5302,27 +5375,10 @@ static int hpsa_eh_abort_handler(struct scsi_cmnd *sc)
return FAILED;
}
dev_info(&h->pdev->dev, "%s SENT, SUCCESS\n", msg);
-
- /*
- * If the abort(s) above completed and actually aborted the
- * command, then the command to be aborted should already be
- * completed. If not, wait around a bit more to see if they
- * manage to complete normally.
- */
-#define ABORT_COMPLETE_WAIT_SECS 30
- for (i = 0; i < ABORT_COMPLETE_WAIT_SECS * 10; i++) {
- refcount = atomic_read(&abort->refcount);
- if (refcount < 2) {
- cmd_free(h, abort);
- return SUCCESS;
- } else {
- msleep(100);
- }
- }
- dev_warn(&h->pdev->dev, "%s FAILED. Aborted command has not completed after %d seconds.\n",
- msg, ABORT_COMPLETE_WAIT_SECS);
+ wait_event(h->abort_sync_wait_queue,
+ abort->scsi_cmd != sc || lockup_detected(h));
cmd_free(h, abort);
- return FAILED;
+ return !lockup_detected(h) ? SUCCESS : FAILED;
}
/*
@@ -5568,6 +5624,7 @@ static int hpsa_passthru_ioctl(struct ctlr_info *h, void __user *argp)
/* Fill in the command type */
c->cmd_type = CMD_IOCTL_PEND;
+ c->scsi_cmd = SCSI_CMD_BUSY;
/* Fill in Command Header */
c->Header.ReplyQueue = 0; /* unused in simple mode */
if (iocommand.buf_size > 0) { /* buffer to fill */
@@ -5701,6 +5758,7 @@ static int hpsa_big_passthru_ioctl(struct ctlr_info *h, void __user *argp)
c = cmd_alloc(h);
c->cmd_type = CMD_IOCTL_PEND;
+ c->scsi_cmd = SCSI_CMD_BUSY;
c->Header.ReplyQueue = 0;
c->Header.SGList = (u8) sg_used;
c->Header.SGTotal = cpu_to_le16(sg_used);
@@ -5843,6 +5901,7 @@ static int fill_cmd(struct CommandList *c, u8 cmd, struct ctlr_info *h,
u64 tag; /* for commands to be aborted */
c->cmd_type = CMD_IOCTL_PEND;
+ c->scsi_cmd = SCSI_CMD_BUSY;
c->Header.ReplyQueue = 0;
if (buff != NULL && size > 0) {
c->Header.SGList = 1;
@@ -7638,6 +7697,7 @@ reinit_after_soft_reset:
goto clean5; /* cmd, irq, pci, lockup, wq/aer/h */
init_waitqueue_head(&h->scan_wait_queue);
init_waitqueue_head(&h->abort_cmd_wait_queue);
+ init_waitqueue_head(&h->abort_sync_wait_queue);
h->scan_finished = 1; /* no scan currently in progress */
pci_set_drvdata(pdev, h);
diff --git a/drivers/scsi/hpsa.h b/drivers/scsi/hpsa.h
index 28b5d79..7cb8586 100644
--- a/drivers/scsi/hpsa.h
+++ b/drivers/scsi/hpsa.h
@@ -266,6 +266,7 @@ struct ctlr_info {
struct workqueue_struct *rescan_ctlr_wq;
atomic_t abort_cmds_available;
wait_queue_head_t abort_cmd_wait_queue;
+ wait_queue_head_t abort_sync_wait_queue;
};
struct offline_device_entry {
diff --git a/drivers/scsi/hpsa_cmd.h b/drivers/scsi/hpsa_cmd.h
index 3719592..f986402 100644
--- a/drivers/scsi/hpsa_cmd.h
+++ b/drivers/scsi/hpsa_cmd.h
@@ -439,6 +439,8 @@ struct CommandList {
* not used.
*/
struct hpsa_scsi_dev_t *phys_disk;
+
+ int abort_pending;
atomic_t refcount; /* Must be last to avoid memset in hpsa_cmd_init() */
} __aligned(COMMANDLIST_ALIGNMENT);
^ permalink raw reply related [flat|nested] 58+ messages in thread* [PATCH 29/43] hpsa: refactor and rework support for sending TEST_UNIT_READY
2015-02-21 22:17 [PATCH 00/43] hpsa updates Don Brace
` (27 preceding siblings ...)
2015-02-21 22:20 ` [PATCH 28/43] hpsa: don't return abort request until target is complete Don Brace
@ 2015-02-21 22:20 ` Don Brace
2015-02-21 22:20 ` [PATCH 30/43] hpsa: performance tweak for hpsa_scatter_gather() Don Brace
` (13 subsequent siblings)
42 siblings, 0 replies; 58+ messages in thread
From: Don Brace @ 2015-02-21 22:20 UTC (permalink / raw)
To: scott.teel, Kevin.Barnett, james.bottomley, hch, Justin.Lindley,
brace
Cc: linux-scsi
From: Webb Scales <webbnh@hp.com>
Factor out the code which sends the TEST_UNIT_READY from
wait_for_device_to_become_ready() into its own function.
Move the code which waits for the TEST_UNIT_READY from
wait_for_device_to_become_ready() into its own function.
If a logical drive has failed, resetting it will ensure
outstanding commands are completed, but polling it with
TURs after the reset will not work because the TURs will
never report good status. So successful TUR should not
be a condition of success for the device reset error
handler.
Reviewed-by: Scott Teel <scott.teel@pmcs.com>
Reviewed-by: Kevin Barnett <kevin.barnett@pmcs.com>
Signed-off-by: Webb Scales <webbnh@hp.com>
Signed-off-by: Don Brace <don.brace@pmcs.com>
---
drivers/scsi/hpsa.c | 117 ++++++++++++++++++++++++++++++++++++++-------------
1 file changed, 87 insertions(+), 30 deletions(-)
diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index 6676517..ae3789b 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -4838,51 +4838,108 @@ static int hpsa_register_scsi(struct ctlr_info *h)
return -ENOMEM;
}
-static int wait_for_device_to_become_ready(struct ctlr_info *h,
- unsigned char lunaddr[])
+/*
+ * Send a TEST_UNIT_READY command to the specified LUN using the specified
+ * reply queue; returns zero if the unit is ready, and non-zero otherwise.
+ */
+static int hpsa_send_test_unit_ready(struct ctlr_info *h,
+ struct CommandList *c, unsigned char lunaddr[],
+ int reply_queue)
+{
+ int rc;
+
+ /* Send the Test Unit Ready, fill_cmd can't fail, no mapping */
+ (void) fill_cmd(c, TEST_UNIT_READY, h,
+ NULL, 0, 0, lunaddr, TYPE_CMD);
+ rc = hpsa_scsi_do_simple_cmd(h, c, reply_queue, NO_TIMEOUT);
+ if (rc)
+ return rc;
+ /* no unmap needed here because no data xfer. */
+
+ /* Check if the unit is already ready. */
+ if (c->err_info->CommandStatus == CMD_SUCCESS)
+ return 0;
+
+ /*
+ * The first command sent after reset will receive "unit attention" to
+ * indicate that the LUN has been reset...this is actually what we're
+ * looking for (but, success is good too).
+ */
+ if (c->err_info->CommandStatus == CMD_TARGET_STATUS &&
+ c->err_info->ScsiStatus == SAM_STAT_CHECK_CONDITION &&
+ (c->err_info->SenseInfo[2] == NO_SENSE ||
+ c->err_info->SenseInfo[2] == UNIT_ATTENTION))
+ return 0;
+
+ return 1;
+}
+
+/*
+ * Wait for a TEST_UNIT_READY command to complete, retrying as necessary;
+ * returns zero when the unit is ready, and non-zero when giving up.
+ */
+static int hpsa_wait_for_test_unit_ready(struct ctlr_info *h,
+ struct CommandList *c,
+ unsigned char lunaddr[], int reply_queue)
{
int rc;
int count = 0;
int waittime = 1; /* seconds */
- struct CommandList *c;
-
- c = cmd_alloc(h);
/* Send test unit ready until device ready, or give up. */
- while (count < HPSA_TUR_RETRY_LIMIT) {
+ for (count = 0; count < HPSA_TUR_RETRY_LIMIT; count++) {
- /* Wait for a bit. do this first, because if we send
+ /*
+ * Wait for a bit. do this first, because if we send
* the TUR right away, the reset will just abort it.
*/
msleep(1000 * waittime);
- count++;
- rc = 0; /* Device ready. */
+
+ rc = hpsa_send_test_unit_ready(h, c, lunaddr, reply_queue);
+ if (!rc)
+ break;
/* Increase wait time with each try, up to a point. */
if (waittime < HPSA_MAX_WAIT_INTERVAL_SECS)
- waittime = waittime * 2;
+ waittime *= 2;
- /* Send the Test Unit Ready, fill_cmd can't fail, no mapping */
- (void) fill_cmd(c, TEST_UNIT_READY, h,
- NULL, 0, 0, lunaddr, TYPE_CMD);
- rc = hpsa_scsi_do_simple_cmd(h, c, DEFAULT_REPLY_QUEUE,
- NO_TIMEOUT);
- if (rc)
- goto do_it_again;
- /* no unmap needed here because no data xfer. */
+ dev_warn(&h->pdev->dev,
+ "waiting %d secs for device to become ready.\n",
+ waittime);
+ }
- if (c->err_info->CommandStatus == CMD_SUCCESS)
- break;
+ return rc;
+}
- if (c->err_info->CommandStatus == CMD_TARGET_STATUS &&
- c->err_info->ScsiStatus == SAM_STAT_CHECK_CONDITION &&
- (c->err_info->SenseInfo[2] == NO_SENSE ||
- c->err_info->SenseInfo[2] == UNIT_ATTENTION))
+static int wait_for_device_to_become_ready(struct ctlr_info *h,
+ unsigned char lunaddr[],
+ int reply_queue)
+{
+ int first_queue;
+ int last_queue;
+ int rq;
+ int rc = 0;
+ struct CommandList *c;
+
+ c = cmd_alloc(h);
+
+ /*
+ * If no specific reply queue was requested, then send the TUR
+ * repeatedly, requesting a reply on each reply queue; otherwise execute
+ * the loop exactly once using only the specified queue.
+ */
+ if (reply_queue == DEFAULT_REPLY_QUEUE) {
+ first_queue = 0;
+ last_queue = h->nreply_queues - 1;
+ } else {
+ first_queue = reply_queue;
+ last_queue = reply_queue;
+ }
+
+ for (rq = first_queue; rq <= last_queue; rq++) {
+ rc = hpsa_wait_for_test_unit_ready(h, c, lunaddr, rq);
+ if (rc)
break;
-do_it_again:
- dev_warn(&h->pdev->dev, "waiting %d secs "
- "for device to become ready.\n", waittime);
- rc = 1; /* device not ready. */
}
if (rc)
@@ -4951,7 +5008,7 @@ static int hpsa_eh_device_reset_handler(struct scsi_cmnd *scsicmd)
/* send a reset to the SCSI LUN which the command was sent to */
rc = hpsa_send_reset(h, dev->scsi3addr, HPSA_RESET_TYPE_LUN,
DEFAULT_REPLY_QUEUE);
- if (rc == 0 && wait_for_device_to_become_ready(h, dev->scsi3addr) == 0)
+ if (rc == 0)
return SUCCESS;
dev_warn(&h->pdev->dev,
@@ -5146,7 +5203,7 @@ static int hpsa_send_reset_as_abort_ioaccel2(struct ctlr_info *h,
}
/* wait for device to recover */
- if (wait_for_device_to_become_ready(h, psa) != 0) {
+ if (wait_for_device_to_become_ready(h, psa, reply_queue) != 0) {
dev_warn(&h->pdev->dev,
"Reset as abort: Failed: Device never recovered from reset: 0x%02x%02x%02x%02x%02x%02x%02x%02x\n",
psa[0], psa[1], psa[2], psa[3],
^ permalink raw reply related [flat|nested] 58+ messages in thread* [PATCH 30/43] hpsa: performance tweak for hpsa_scatter_gather()
2015-02-21 22:17 [PATCH 00/43] hpsa updates Don Brace
` (28 preceding siblings ...)
2015-02-21 22:20 ` [PATCH 29/43] hpsa: refactor and rework support for sending TEST_UNIT_READY Don Brace
@ 2015-02-21 22:20 ` Don Brace
2015-02-21 22:20 ` [PATCH 31/43] hpsa: call pci_release_regions after pci_disable_device Don Brace
` (12 subsequent siblings)
42 siblings, 0 replies; 58+ messages in thread
From: Don Brace @ 2015-02-21 22:20 UTC (permalink / raw)
To: scott.teel, Kevin.Barnett, james.bottomley, hch, Justin.Lindley,
brace
Cc: linux-scsi
From: Webb Scales <webbnh@hp.com>
Divide the loop in hpsa_scatter_gather() into two, one for the initial SG list
and a second one for the chained list, if any. This allows the conditional
check which resets the indicies for the chained list to be performed outside
the loop instead of being done on every iteration inside the loop.
Reviewed-by: Scott Teel <scott.teel@pmcs.com>
Reviewed-by: Kevin Barnett <kevin.barnett@pmcs.com>
Signed-off-by: Webb Scales <webbnh@hp.com>
Signed-off-by: Don Brace <don.brace@pmcs.com>
---
drivers/scsi/hpsa.c | 39 ++++++++++++++++++++++++++++-----------
1 file changed, 28 insertions(+), 11 deletions(-)
diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index ae3789b..bbd05ca 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -3725,7 +3725,7 @@ static int hpsa_scatter_gather(struct ctlr_info *h,
struct scsi_cmnd *cmd)
{
struct scatterlist *sg;
- int use_sg, i, sg_index, chained;
+ int use_sg, i, sg_limit, chained, last_sg;
struct SGDescriptor *curr_sg;
BUG_ON(scsi_sg_count(cmd) > h->maxsgentries);
@@ -3737,22 +3737,39 @@ static int hpsa_scatter_gather(struct ctlr_info *h,
if (!use_sg)
goto sglist_finished;
+ /*
+ * If the number of entries is greater than the max for a single list,
+ * then we have a chained list; we will set up all but one entry in the
+ * first list (the last entry is saved for link information);
+ * otherwise, we don't have a chained list and we'll set up at each of
+ * the entries in the one list.
+ */
curr_sg = cp->SG;
- chained = 0;
- sg_index = 0;
- scsi_for_each_sg(cmd, sg, use_sg, i) {
- if (i == h->max_cmd_sg_entries - 1 &&
- use_sg > h->max_cmd_sg_entries) {
- chained = 1;
- curr_sg = h->cmd_sg_list[cp->cmdindex];
- sg_index = 0;
- }
+ chained = use_sg > h->max_cmd_sg_entries;
+ sg_limit = chained ? h->max_cmd_sg_entries - 1 : use_sg;
+ last_sg = scsi_sg_count(cmd) - 1;
+ scsi_for_each_sg(cmd, sg, sg_limit, i) {
hpsa_set_sg_descriptor(curr_sg, sg);
curr_sg++;
}
+ if (chained) {
+ /*
+ * Continue with the chained list. Set curr_sg to the chained
+ * list. Modify the limit to the total count less the entries
+ * we've already set up. Resume the scan at the list entry
+ * where the previous loop left off.
+ */
+ curr_sg = h->cmd_sg_list[cp->cmdindex];
+ sg_limit = use_sg - sg_limit;
+ for_each_sg(sg, sg, sg_limit, i) {
+ hpsa_set_sg_descriptor(curr_sg, sg);
+ curr_sg++;
+ }
+ }
+
/* Back the pointer up to the last entry and mark it as "last". */
- (--curr_sg)->Ext = cpu_to_le32(HPSA_SG_LAST);
+ (curr_sg - 1)->Ext = cpu_to_le32(HPSA_SG_LAST);
if (use_sg + chained > h->maxSG)
h->maxSG = use_sg + chained;
^ permalink raw reply related [flat|nested] 58+ messages in thread* [PATCH 31/43] hpsa: call pci_release_regions after pci_disable_device
2015-02-21 22:17 [PATCH 00/43] hpsa updates Don Brace
` (29 preceding siblings ...)
2015-02-21 22:20 ` [PATCH 30/43] hpsa: performance tweak for hpsa_scatter_gather() Don Brace
@ 2015-02-21 22:20 ` Don Brace
2015-02-21 22:20 ` [PATCH 32/43] hpsa: skip free_irq calls if irqs are not allocated Don Brace
` (11 subsequent siblings)
42 siblings, 0 replies; 58+ messages in thread
From: Don Brace @ 2015-02-21 22:20 UTC (permalink / raw)
To: scott.teel, Kevin.Barnett, james.bottomley, hch, Justin.Lindley,
brace
Cc: linux-scsi
From: Robert Elliott <elliott@hp.com>
Despite the fact that PCI devices are enabled in this order:
1. pci_enable_device
2. pci_request_regions
Documentation/PCI/pci.txt specifies that they be undone
in this order
1. pci_disable_device
2. pci_release_regions
Tested by injecting error in the call to pci_enable_device
in hpsa_init_one -> hpsa_pci_init:
[ 9.095001] hpsa 0000:04:00.0: failed to enable PCI device
[ 9.095005] hpsa: probe of 0000:04:00.0 failed with error -22
(-22 is -EINVAL)
and then in the call pci_request_regions:
[ 9.178623] hpsa 0000:04:00.0: failed to obtain PCI resources
[ 9.178671] hpsa: probe of 0000:04:00.0 failed with error -16
(-16 is -EBUSY)
and then by adding
reset_devices
to the kernel command line and inject errors into the two
calls to pci_enable_device and the call to pci_request_regions
in hpsa_init_one -> hpsa_init_reset_devices.
(inject on 6th call, 1st to hpsa2)
[ 62.413750] hpsa 0000:04:00.0: Failed to enable PCI device
(inject on 7th call, 2nd to hpsa2)
[ 62.807571] hpsa 0000:04:00.0: failed to enable device.
(inject on 8th call, 3rd to hpsa2)
[ 62.697198] hpsa 0000:04:00.0: failed to obtain PCI resources
[ 62.697234] hpsa: probe of 0000:04:00.0 failed with error -16
The reset_devices path calls return -ENODEV on failure
rather than passing the result, which apparently doesn't
cause the pci driver to print anything.
Reviewed-by: Scott Teel <scott.teel@pmcs.com>
Reviewed-by: Kevin Barnett <kevin.barnett@pmcs.com>
Signed-off-by: Robert Elliott <elliott@hp.com>
Signed-off-by: Don Brace < don.brace@pmcs.com>
---
drivers/scsi/hpsa.c | 17 +++++++++++++----
1 file changed, 13 insertions(+), 4 deletions(-)
diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index bbd05ca..b66a7cd 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -7091,8 +7091,12 @@ static void hpsa_free_pci_init(struct ctlr_info *h)
iounmap(h->vaddr); /* pci_init 3 */
h->vaddr = NULL;
hpsa_disable_interrupt_mode(h); /* pci_init 2 */
- pci_release_regions(h->pdev); /* pci_init 2 */
+ /*
+ * call pci_disable_device before pci_release_regions per
+ * Documentation/PCI/pci.txt
+ */
pci_disable_device(h->pdev); /* pci_init 1 */
+ pci_release_regions(h->pdev); /* pci_init 2 */
}
/* several items must be freed later */
@@ -7115,6 +7119,7 @@ static int hpsa_pci_init(struct ctlr_info *h)
err = pci_enable_device(h->pdev);
if (err) {
dev_err(&h->pdev->dev, "failed to enable PCI device\n");
+ pci_disable_device(h->pdev);
return err;
}
@@ -7122,7 +7127,8 @@ static int hpsa_pci_init(struct ctlr_info *h)
if (err) {
dev_err(&h->pdev->dev,
"failed to obtain PCI resources\n");
- goto clean1; /* pci */
+ pci_disable_device(h->pdev);
+ return err;
}
pci_set_master(h->pdev);
@@ -7163,9 +7169,12 @@ clean3: /* vaddr, intmode+region, pci */
h->vaddr = NULL;
clean2: /* intmode+region, pci */
hpsa_disable_interrupt_mode(h);
- pci_release_regions(h->pdev);
-clean1: /* pci */
+ /*
+ * call pci_disable_device before pci_release_regions per
+ * Documentation/PCI/pci.txt
+ */
pci_disable_device(h->pdev);
+ pci_release_regions(h->pdev);
return err;
}
^ permalink raw reply related [flat|nested] 58+ messages in thread* [PATCH 32/43] hpsa: skip free_irq calls if irqs are not allocated
2015-02-21 22:17 [PATCH 00/43] hpsa updates Don Brace
` (30 preceding siblings ...)
2015-02-21 22:20 ` [PATCH 31/43] hpsa: call pci_release_regions after pci_disable_device Don Brace
@ 2015-02-21 22:20 ` Don Brace
2015-02-21 22:20 ` [PATCH 33/43] hpsa: cleanup for init_one step 2 in kdump Don Brace
` (10 subsequent siblings)
42 siblings, 0 replies; 58+ messages in thread
From: Don Brace @ 2015-02-21 22:20 UTC (permalink / raw)
To: scott.teel, Kevin.Barnett, james.bottomley, hch, Justin.Lindley,
brace
Cc: linux-scsi
From: Robert Elliott <elliott@hp.com>
If try_soft_reset fails to re-allocate irqs, the error exit
starts with free_irq calls, which generate kernel WARN
messages since they were already freed a few lines earlier.
Jump to the next exit label to skip the free_irq calls.
Reviewed-by: Scott Teel <scott.teel@pmcs.com>
Reviewed-by: Kevin Barnett <kevin.barnett@pmcs.com>
Signed-off-by: Robert Elliott <elliott@hp.com>
Signed-off-by: Don Brace <don.brace@pmcs.com>
---
drivers/scsi/hpsa.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index b66a7cd..35fdf1f 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -7815,7 +7815,12 @@ reinit_after_soft_reset:
if (rc) {
dev_warn(&h->pdev->dev,
"Failed to request_irq after soft reset.\n");
- goto clean4;
+ /*
+ * clean4 starts with free_irqs, but that was just
+ * done. Then, request_irqs_failed, so there is
+ * nothing to free. So, goto the next label.
+ */
+ goto clean3;
}
rc = hpsa_kdump_soft_reset(h);
^ permalink raw reply related [flat|nested] 58+ messages in thread* [PATCH 33/43] hpsa: cleanup for init_one step 2 in kdump
2015-02-21 22:17 [PATCH 00/43] hpsa updates Don Brace
` (31 preceding siblings ...)
2015-02-21 22:20 ` [PATCH 32/43] hpsa: skip free_irq calls if irqs are not allocated Don Brace
@ 2015-02-21 22:20 ` Don Brace
2015-02-21 22:20 ` [PATCH 34/43] hpsa: fix try_soft_reset error handling Don Brace
` (9 subsequent siblings)
42 siblings, 0 replies; 58+ messages in thread
From: Don Brace @ 2015-02-21 22:20 UTC (permalink / raw)
To: scott.teel, Kevin.Barnett, james.bottomley, hch, Justin.Lindley,
brace
Cc: linux-scsi
From: Robert Elliott <elliott@hp.com>
In hpsa_undo_allocations_after_kdump_soft_reset,
the things allocated in hpsa_init_one step 2 -
h->resubmit_wq and h->lockup_detected need to
be freed, in the right order.
Reviewed-by: Scott Teel <scott.teel@pmcs.com>
Reviewed-by: Kevin Barnett <kevin.barnett@pmcs.com>
Signed-off-by: Robert Elliott <elliott@hp.com>
Signed-off-by: Don Brace <don.brace@pmcs.com>
---
drivers/scsi/hpsa.c | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index 35fdf1f..3071089 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -7438,6 +7438,16 @@ static void hpsa_undo_allocations_after_kdump_soft_reset(struct ctlr_info *h)
hpsa_free_cmd_pool(h); /* init_one 5 */
hpsa_free_irqs(h); /* init_one 4 */
hpsa_free_pci_init(h); /* init_one 3 */
+ free_percpu(h->lockup_detected); /* init_one 2 */
+ h->lockup_detected = NULL; /* init_one 2 */
+ if (h->resubmit_wq) {
+ destroy_workqueue(h->resubmit_wq); /* init_one 1 */
+ h->resubmit_wq = NULL;
+ }
+ if (h->rescan_ctlr_wq) {
+ destroy_workqueue(h->rescan_ctlr_wq);
+ h->rescan_ctlr_wq = NULL;
+ }
kfree(h); /* init_one 1 */
}
^ permalink raw reply related [flat|nested] 58+ messages in thread* [PATCH 34/43] hpsa: fix try_soft_reset error handling
2015-02-21 22:17 [PATCH 00/43] hpsa updates Don Brace
` (32 preceding siblings ...)
2015-02-21 22:20 ` [PATCH 33/43] hpsa: cleanup for init_one step 2 in kdump Don Brace
@ 2015-02-21 22:20 ` Don Brace
2015-02-21 22:20 ` [PATCH 35/43] hpsa: create workqueue after the driver is ready for use Don Brace
` (8 subsequent siblings)
42 siblings, 0 replies; 58+ messages in thread
From: Don Brace @ 2015-02-21 22:20 UTC (permalink / raw)
To: scott.teel, Kevin.Barnett, james.bottomley, hch, Justin.Lindley,
brace
Cc: linux-scsi
From: Robert Elliott <elliott@hp.com>
If registering the special interrupt handlers in hpsa_init_one
before a soft reset fails, the error exit needs to deallocate
everything that was allocated before.
Reviewed-by: Scott Teel <scott.teel@pmcs.com>
Reviewed-by: Kevin Barnett <kevin.barnett@pmcs.com>
Signed-off-by: Robert Elliott <elliott@hp.com>
Signed-off-by: Don Brace <don.brace@pmcs.com>
---
drivers/scsi/hpsa.c | 16 +++++++++++-----
1 file changed, 11 insertions(+), 5 deletions(-)
diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index 3071089..27ab918 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -7826,9 +7826,15 @@ reinit_after_soft_reset:
dev_warn(&h->pdev->dev,
"Failed to request_irq after soft reset.\n");
/*
- * clean4 starts with free_irqs, but that was just
- * done. Then, request_irqs_failed, so there is
- * nothing to free. So, goto the next label.
+ * cannot goto clean7 or free_irqs will be called
+ * again. Instead, do its work
+ */
+ hpsa_free_performant_mode(h); /* clean7 */
+ hpsa_free_sg_chain_blocks(h); /* clean6 */
+ hpsa_free_cmd_pool(h); /* clean5 */
+ /*
+ * skip hpsa_free_irqs(h) clean4 since that
+ * was just called before request_irqs failed
*/
goto clean3;
}
@@ -7836,7 +7842,7 @@ reinit_after_soft_reset:
rc = hpsa_kdump_soft_reset(h);
if (rc)
/* Neither hard nor soft reset worked, we're hosed. */
- goto clean4;
+ goto clean7;
dev_info(&h->pdev->dev, "Board READY.\n");
dev_info(&h->pdev->dev,
@@ -7857,7 +7863,7 @@ reinit_after_soft_reset:
hpsa_undo_allocations_after_kdump_soft_reset(h);
try_soft_reset = 0;
if (rc)
- /* don't go to clean4, we already unallocated */
+ /* don't goto clean, we already unallocated */
return -ENODEV;
goto reinit_after_soft_reset;
^ permalink raw reply related [flat|nested] 58+ messages in thread* [PATCH 35/43] hpsa: create workqueue after the driver is ready for use
2015-02-21 22:17 [PATCH 00/43] hpsa updates Don Brace
` (33 preceding siblings ...)
2015-02-21 22:20 ` [PATCH 34/43] hpsa: fix try_soft_reset error handling Don Brace
@ 2015-02-21 22:20 ` Don Brace
2015-02-21 22:20 ` [PATCH 36/43] hpsa: add interrupt number to /proc/interrupts interrupt name Don Brace
` (7 subsequent siblings)
42 siblings, 0 replies; 58+ messages in thread
From: Don Brace @ 2015-02-21 22:20 UTC (permalink / raw)
To: scott.teel, Kevin.Barnett, james.bottomley, hch, Justin.Lindley,
brace
Cc: linux-scsi
From: Robert Elliott <elliott@hp.com>
Don't create the resubmit workqueue in hpsa_init_one until everything else
is ready to use, so everything can be freed in reverse order of when they
were allocated without risking freeing things while workqueue items are
still active.
Destroy the workqueue in the right order in
hpsa_undo_allocations_after_kdump_soft_reset too.
Reviewed-by: Scott Teel <scott.teel@pmcs.com>
Reviewed-by: Kevin Barnett <kevin.barnett@pmcs.com>
Signed-off-by: Robert Elliott <elliott@hp.com>
Signed-off-by: Don Brace <don.brace@pmcs.com>
---
drivers/scsi/hpsa.c | 60 ++++++++++++++++++++++++++-------------------------
1 file changed, 31 insertions(+), 29 deletions(-)
diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index 27ab918..63fdc70 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -7730,30 +7730,18 @@ reinit_after_soft_reset:
atomic_set(&h->passthru_cmds_avail, HPSA_MAX_CONCURRENT_PASSTHRUS);
atomic_set(&h->abort_cmds_available, HPSA_CMDS_RESERVED_FOR_ABORTS);
- h->rescan_ctlr_wq = hpsa_create_controller_wq(h, "rescan");
- if (!h->rescan_ctlr_wq) {
- rc = -ENOMEM;
- goto clean1;
- }
-
- h->resubmit_wq = hpsa_create_controller_wq(h, "resubmit");
- if (!h->resubmit_wq) {
- rc = -ENOMEM;
- goto clean1; /* aer/h */
- }
-
/* Allocate and clear per-cpu variable lockup_detected */
h->lockup_detected = alloc_percpu(u32);
if (!h->lockup_detected) {
dev_err(&h->pdev->dev, "Failed to allocate lockup detector\n");
rc = -ENOMEM;
- goto clean1; /* wq/aer/h */
+ goto clean1; /* aer/h */
}
set_lockup_detected_for_all_cpus(h, 0);
rc = hpsa_pci_init(h);
if (rc)
- goto clean2; /* lockup, wq/aer/h */
+ goto clean2; /* lockup, aer/h */
sprintf(h->devname, HPSA "%d", number_of_controllers);
h->ctlr = number_of_controllers;
@@ -7769,7 +7757,7 @@ reinit_after_soft_reset:
dac = 0;
} else {
dev_err(&pdev->dev, "no suitable DMA available\n");
- goto clean3; /* pci, lockup, wq/aer/h */
+ goto clean3; /* pci, lockup, aer/h */
}
}
@@ -7778,16 +7766,16 @@ reinit_after_soft_reset:
rc = hpsa_request_irqs(h, do_hpsa_intr_msi, do_hpsa_intr_intx);
if (rc)
- goto clean3; /* pci, lockup, wq/aer/h */
+ goto clean3; /* pci, lockup, aer/h */
dev_info(&pdev->dev, "%s: <0x%x> at IRQ %d%s using DAC\n",
h->devname, pdev->device,
h->intr[h->intr_mode], dac ? "" : " not");
rc = hpsa_alloc_cmd_pool(h);
if (rc)
- goto clean4; /* irq, pci, lockup, wq/aer/h */
+ goto clean4; /* irq, pci, lockup, aer/h */
rc = hpsa_alloc_sg_chain_blocks(h);
if (rc)
- goto clean5; /* cmd, irq, pci, lockup, wq/aer/h */
+ goto clean5; /* cmd, irq, pci, lockup, aer/h */
init_waitqueue_head(&h->scan_wait_queue);
init_waitqueue_head(&h->abort_cmd_wait_queue);
init_waitqueue_head(&h->abort_sync_wait_queue);
@@ -7800,7 +7788,20 @@ reinit_after_soft_reset:
spin_lock_init(&h->devlock);
rc = hpsa_put_ctlr_into_performant_mode(h);
if (rc)
- goto clean6; /* sg, cmd, irq, pci, lockup, wq/aer/h */
+ goto clean6; /* sg, cmd, irq, pci, lockup, aer/h */
+
+ /* create the resubmit workqueue */
+ h->rescan_ctlr_wq = hpsa_create_controller_wq(h, "rescan");
+ if (!h->rescan_ctlr_wq) {
+ rc = -ENOMEM;
+ goto clean7;
+ }
+
+ h->resubmit_wq = hpsa_create_controller_wq(h, "resubmit");
+ if (!h->resubmit_wq) {
+ rc = -ENOMEM;
+ goto clean7; /* aer/h */
+ }
/*
* At this point, the controller is ready to take commands.
@@ -7842,7 +7843,7 @@ reinit_after_soft_reset:
rc = hpsa_kdump_soft_reset(h);
if (rc)
/* Neither hard nor soft reset worked, we're hosed. */
- goto clean7;
+ goto clean8;
dev_info(&h->pdev->dev, "Board READY.\n");
dev_info(&h->pdev->dev,
@@ -7879,7 +7880,7 @@ reinit_after_soft_reset:
hpsa_hba_inquiry(h);
rc = hpsa_register_scsi(h); /* hook ourselves into SCSI subsystem */
if (rc)
- goto clean7;
+ goto clean8; /* wq, perf, sg, cmd, irq, pci, lockup, aer/h */
/* Monitor the controller for firmware lockups */
h->heartbeat_sample_interval = HEARTBEAT_SAMPLE_INTERVAL;
@@ -7891,19 +7892,20 @@ reinit_after_soft_reset:
h->heartbeat_sample_interval);
return 0;
-clean7: /* perf, sg, cmd, irq, pci, lockup, wq/aer/h */
+clean8: /* perf, sg, cmd, irq, pci, lockup, aer/h */
kfree(h->hba_inquiry_data);
+clean7: /* perf, sg, cmd, irq, pci, lockup, aer/h */
hpsa_free_performant_mode(h);
h->access.set_intr_mask(h, HPSA_INTR_OFF);
clean6: /* sg, cmd, irq, pci, lockup, wq/aer/h */
hpsa_free_sg_chain_blocks(h);
-clean5: /* cmd, irq, pci, lockup, wq/aer/h */
+clean5: /* cmd, irq, pci, lockup, aer/h */
hpsa_free_cmd_pool(h);
-clean4: /* irq, pci, lockup, wq/aer/h */
+clean4: /* irq, pci, lockup, aer/h */
hpsa_free_irqs(h);
-clean3: /* pci, lockup, wq/aer/h */
+clean3: /* pci, lockup, aer/h */
hpsa_free_pci_init(h);
-clean2: /* lockup, wq/aer/h */
+clean2: /* lockup, aer/h */
if (h->lockup_detected) {
free_percpu(h->lockup_detected);
h->lockup_detected = NULL;
@@ -8002,9 +8004,9 @@ static void hpsa_remove_one(struct pci_dev *pdev)
hpsa_free_device_info(h); /* scan */
- hpsa_unregister_scsi(h); /* init_one "8" */
- kfree(h->hba_inquiry_data); /* init_one "8" */
- h->hba_inquiry_data = NULL; /* init_one "8" */
+ hpsa_unregister_scsi(h); /* init_one 9 */
+ kfree(h->hba_inquiry_data); /* init_one 9 */
+ h->hba_inquiry_data = NULL; /* init_one 9 */
hpsa_free_performant_mode(h); /* init_one 7 */
hpsa_free_sg_chain_blocks(h); /* init_one 6 */
hpsa_free_cmd_pool(h); /* init_one 5 */
^ permalink raw reply related [flat|nested] 58+ messages in thread* [PATCH 36/43] hpsa: add interrupt number to /proc/interrupts interrupt name
2015-02-21 22:17 [PATCH 00/43] hpsa updates Don Brace
` (34 preceding siblings ...)
2015-02-21 22:20 ` [PATCH 35/43] hpsa: create workqueue after the driver is ready for use Don Brace
@ 2015-02-21 22:20 ` Don Brace
2015-02-21 22:20 ` [PATCH 37/43] hpsa: use block layer tag for command allocation Don Brace
` (6 subsequent siblings)
42 siblings, 0 replies; 58+ messages in thread
From: Don Brace @ 2015-02-21 22:20 UTC (permalink / raw)
To: scott.teel, Kevin.Barnett, james.bottomley, hch, Justin.Lindley,
brace
Cc: linux-scsi
From: Robert Elliott <elliott@hp.com>
Add the interrupt number to the interrupt names that
appear in /proc/interrupts, so they are unique
Also, delete the IRQ and DAC prints. Other parts of the kernel
already print the IRQ assignments, and dual-address-cycle support
has not been interesting since the parallel PCI bus went from
32 to 64 bits wide.
Reviewed-by: Scott Teel <scott.teel@pmcs.com>
Reviewed-by: Kevin Barnett <kevin.barnett@pmcs.com>
Signed-off-by: Robert Elliott <elliott@hp.com>
Signed-off-by: Don Brace <don.brace@pmcs.com>
---
drivers/scsi/hpsa.c | 20 ++++++++++++++------
drivers/scsi/hpsa.h | 1 +
2 files changed, 15 insertions(+), 6 deletions(-)
diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index 63fdc70..d69a732 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -7353,8 +7353,9 @@ static int hpsa_request_irqs(struct ctlr_info *h,
if (h->intr_mode == PERF_MODE_INT && h->msix_vector > 0) {
/* If performant mode and MSI-X, use multiple reply queues */
for (i = 0; i < h->msix_vector; i++) {
+ sprintf(h->intrname[i], "%s-msix%d", h->devname, i);
rc = request_irq(h->intr[i], msixhandler,
- 0, h->devname,
+ 0, h->intrname[i],
&h->q[i]);
if (rc) {
int j;
@@ -7375,12 +7376,22 @@ static int hpsa_request_irqs(struct ctlr_info *h,
} else {
/* Use single reply pool */
if (h->msix_vector > 0 || h->msi_vector) {
+ if (h->msix_vector)
+ sprintf(h->intrname[h->intr_mode],
+ "%s-msix", h->devname);
+ else
+ sprintf(h->intrname[h->intr_mode],
+ "%s-msi", h->devname);
rc = request_irq(h->intr[h->intr_mode],
- msixhandler, 0, h->devname,
+ msixhandler, 0,
+ h->intrname[h->intr_mode],
&h->q[h->intr_mode]);
} else {
+ sprintf(h->intrname[h->intr_mode],
+ "%s-intx", h->devname);
rc = request_irq(h->intr[h->intr_mode],
- intxhandler, IRQF_SHARED, h->devname,
+ intxhandler, IRQF_SHARED,
+ h->intrname[h->intr_mode],
&h->q[h->intr_mode]);
}
irq_set_affinity_hint(h->intr[h->intr_mode], NULL);
@@ -7767,9 +7778,6 @@ reinit_after_soft_reset:
rc = hpsa_request_irqs(h, do_hpsa_intr_msi, do_hpsa_intr_intx);
if (rc)
goto clean3; /* pci, lockup, aer/h */
- dev_info(&pdev->dev, "%s: <0x%x> at IRQ %d%s using DAC\n",
- h->devname, pdev->device,
- h->intr[h->intr_mode], dac ? "" : " not");
rc = hpsa_alloc_cmd_pool(h);
if (rc)
goto clean4; /* irq, pci, lockup, aer/h */
diff --git a/drivers/scsi/hpsa.h b/drivers/scsi/hpsa.h
index 7cb8586..3ec8934 100644
--- a/drivers/scsi/hpsa.h
+++ b/drivers/scsi/hpsa.h
@@ -220,6 +220,7 @@ struct ctlr_info {
int remove_in_progress;
/* Address of h->q[x] is passed to intr handler to know which queue */
u8 q[MAX_REPLY_QUEUES];
+ char intrname[MAX_REPLY_QUEUES][16]; /* "hpsa0-msix00" names */
u32 TMFSupportFlags; /* cache what task mgmt funcs are supported. */
#define HPSATMF_BITS_SUPPORTED (1 << 0)
#define HPSATMF_PHYS_LUN_RESET (1 << 1)
^ permalink raw reply related [flat|nested] 58+ messages in thread* [PATCH 37/43] hpsa: use block layer tag for command allocation
2015-02-21 22:17 [PATCH 00/43] hpsa updates Don Brace
` (35 preceding siblings ...)
2015-02-21 22:20 ` [PATCH 36/43] hpsa: add interrupt number to /proc/interrupts interrupt name Don Brace
@ 2015-02-21 22:20 ` Don Brace
2015-02-23 20:25 ` Christoph Hellwig
2015-02-21 22:20 ` [PATCH 38/43] hpsa: clean up new block layer tag error handling Don Brace
` (5 subsequent siblings)
42 siblings, 1 reply; 58+ messages in thread
From: Don Brace @ 2015-02-21 22:20 UTC (permalink / raw)
To: scott.teel, Kevin.Barnett, james.bottomley, hch, Justin.Lindley,
brace
Cc: linux-scsi
From: Webb Scales <webbnh@hp.com>
Rework slave allocation:
- separate the tagging support setup from the hostdata setup
- make the hostdata setup act consistently when the lookup fails
- make the hostdata setup act consistently when the device is not added
- set up the queue depth consistently across these scenarios
- if the block layer mq support is not available, explicitly enable and
activate the SCSI layer tcq support (and do this at allocation-time so
that the tags will be available for INQUIRY commands)
Tweak slave configuration so that devices which are masked are also
not attached.
Reviewed-by: Scott Teel <scott.teel@pmcs.com>
Reviewed-by: Kevin Barnett <kevin.barnett@pmcs.com>
Signed-off-by: Webb Scales <webbnh@hp.com>
Signed-off-by: Don Brace <don.brace@pmcs.com>
---
drivers/scsi/hpsa.c | 166 +++++++++++++++++++++++++++++++++++++++++++--------
drivers/scsi/hpsa.h | 1
2 files changed, 141 insertions(+), 26 deletions(-)
diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index d69a732..8f1b0e6 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -211,6 +211,9 @@ static int hpsa_compat_ioctl(struct scsi_device *dev, int cmd,
static void cmd_free(struct ctlr_info *h, struct CommandList *c);
static struct CommandList *cmd_alloc(struct ctlr_info *h);
+static void cmd_tagged_free(struct ctlr_info *h, struct CommandList *c);
+static struct CommandList *cmd_tagged_alloc(struct ctlr_info *h,
+ struct scsi_cmnd *scmd);
static int fill_cmd(struct CommandList *c, u8 cmd, struct ctlr_info *h,
void *buff, size_t size, u16 page_code, unsigned char *scsi3addr,
int cmd_type);
@@ -2063,11 +2066,17 @@ static void hpsa_cmd_resolve_events(struct ctlr_info *h,
}
}
+static void hpsa_cmd_resolve_and_free(struct ctlr_info *h,
+ struct CommandList *c)
+{
+ hpsa_cmd_resolve_events(h, c);
+ cmd_tagged_free(h, c);
+}
+
static void hpsa_cmd_free_and_done(struct ctlr_info *h,
struct CommandList *c, struct scsi_cmnd *cmd)
{
- hpsa_cmd_resolve_events(h, c);
- cmd_free(h, c);
+ hpsa_cmd_resolve_and_free(h, c);
cmd->scsi_done(cmd);
}
@@ -2088,8 +2097,7 @@ static void hpsa_cmd_abort_and_free(struct ctlr_info *h, struct CommandList *c,
hpsa_set_scsi_cmd_aborted(cmd);
dev_warn(&h->pdev->dev, "CDB %16phN was aborted with status 0x%x\n",
c->Request.CDB, c->err_info->ScsiStatus);
- hpsa_cmd_resolve_events(h, c);
- cmd_free(h, c); /* FIX-ME: change to cmd_tagged_free(h, c) */
+ hpsa_cmd_resolve_and_free(h, c);
}
static void process_ioaccel2_completion(struct ctlr_info *h,
@@ -4551,7 +4559,7 @@ static int hpsa_ciss_submit(struct ctlr_info *h,
}
if (hpsa_scatter_gather(h, c, cmd) < 0) { /* Fill SG list */
- cmd_free(h, c);
+ hpsa_cmd_resolve_and_free(h, c);
return SCSI_MLQUEUE_HOST_BUSY;
}
enqueue_cmd_and_start_io(h, c);
@@ -4597,6 +4605,8 @@ static inline void hpsa_cmd_partial_init(struct ctlr_info *h, int index,
{
dma_addr_t cmd_dma_handle = h->cmd_pool_dhandle + index * sizeof(*c);
+ BUG_ON(c->cmdindex != index);
+
memset(c->Request.CDB, 0, sizeof(c->Request.CDB));
memset(c->err_info, 0, sizeof(*c->err_info));
c->busaddr = (u32) cmd_dma_handle;
@@ -4691,27 +4701,31 @@ static int hpsa_scsi_queue_command(struct Scsi_Host *sh, struct scsi_cmnd *cmd)
/* Get the ptr to our adapter structure out of cmd->host. */
h = sdev_to_hba(cmd->device);
- dev = cmd->device->hostdata;
- if (!dev) {
+
+ if (cmd->request->tag < 0) {
+ dev_crit(&h->pdev->dev,
+ "sdev %p scmd %p: bad tag %d -- rejecting\n",
+ cmd->device, cmd, cmd->request->tag);
cmd->result = DID_NO_CONNECT << 16;
cmd->scsi_done(cmd);
return 0;
}
- memcpy(scsi3addr, dev->scsi3addr, sizeof(scsi3addr));
- if (unlikely(lockup_detected(h))) {
+ dev = cmd->device->hostdata;
+ if (!dev) {
cmd->result = DID_NO_CONNECT << 16;
cmd->scsi_done(cmd);
return 0;
}
- c = cmd_alloc(h);
+
+ memcpy(scsi3addr, dev->scsi3addr, sizeof(scsi3addr));
if (unlikely(lockup_detected(h))) {
cmd->result = DID_NO_CONNECT << 16;
- cmd_free(h, c);
cmd->scsi_done(cmd);
return 0;
}
+ c = cmd_tagged_alloc(h, cmd);
/*
* Call alternate submit routine for I/O accelerated commands.
@@ -4724,7 +4738,7 @@ static int hpsa_scsi_queue_command(struct Scsi_Host *sh, struct scsi_cmnd *cmd)
if (rc == 0)
return 0;
if (rc == SCSI_MLQUEUE_HOST_BUSY) {
- cmd_free(h, c);
+ hpsa_cmd_resolve_and_free(h, c);
return SCSI_MLQUEUE_HOST_BUSY;
}
}
@@ -4838,6 +4852,11 @@ static int hpsa_register_scsi(struct ctlr_info *h)
sh->hostdata[0] = (unsigned long) h;
sh->irq = h->intr[h->intr_mode];
sh->unique_id = sh->irq;
+ if (!shost_use_blk_mq(sh)) {
+ error = scsi_init_shared_tag_map(sh, sh->can_queue);
+ if (error)
+ goto fail_host_put;
+ }
error = scsi_add_host(sh, &h->pdev->dev);
if (error)
goto fail_host_put;
@@ -4856,6 +4875,23 @@ static int hpsa_register_scsi(struct ctlr_info *h)
}
/*
+ * The block layer has already gone to the trouble of picking out a unique,
+ * small-integer tag for this request. We use an offset from that value as
+ * an index to select our command block. (The offset allows us to reserve the
+ * low-numbered entries for our own uses.)
+ */
+static int hpsa_get_cmd_index(struct scsi_cmnd *scmd)
+{
+ int idx = scmd->request->tag;
+
+ if (idx < 0)
+ return idx;
+
+ /* Offset to leave space for internal cmds. */
+ return idx += HPSA_NRESERVED_CMDS;
+}
+
+/*
* Send a TEST_UNIT_READY command to the specified LUN using the specified
* reply queue; returns zero if the unit is ready, and non-zero otherwise.
*/
@@ -4995,18 +5031,18 @@ static int hpsa_eh_device_reset_handler(struct scsi_cmnd *scsicmd)
/* if controller locked up, we can guarantee command won't complete */
if (lockup_detected(h)) {
dev_warn(&h->pdev->dev,
- "scsi %d:%d:%d:%d RESET FAILED, lockup detected\n",
- h->scsi_host->host_no, dev->bus, dev->target,
- dev->lun);
+ "scsi %d:%d:%d:%u cmd %d RESET FAILED, lockup detected\n",
+ h->scsi_host->host_no, dev->bus, dev->target, dev->lun,
+ hpsa_get_cmd_index(scsicmd));
return FAILED;
}
/* this reset request might be the result of a lockup; check */
if (detect_controller_lockup(h)) {
dev_warn(&h->pdev->dev,
- "scsi %d:%d:%d:%d RESET FAILED, new lockup detected\n",
+ "scsi %d:%d:%d:%u cmd %d RESET FAILED, new lockup detected\n",
h->scsi_host->host_no, dev->bus, dev->target,
- dev->lun);
+ dev->lun, hpsa_get_cmd_index(scsicmd));
return FAILED;
}
@@ -5455,6 +5491,79 @@ static int hpsa_eh_abort_handler(struct scsi_cmnd *sc)
return !lockup_detected(h) ? SUCCESS : FAILED;
}
+static void hpsa_print_scsi_cmd(struct ctlr_info *h, struct scsi_cmnd *scmd,
+ char *prefix)
+{
+ struct request *r;
+
+ if (!scmd) {
+ dev_err(&h->pdev->dev, "%s scsi_cmnd is NULL\n", prefix);
+ return;
+ }
+
+ if (!scmd->request) {
+ dev_err(&h->pdev->dev, "%s scsi_cmnd->request is NULL\n",
+ prefix);
+ return;
+ }
+
+ r = scmd->request;
+ dev_warn(&h->pdev->dev,
+ "%s scsi_cmd %p, tag %d, request queue %p CDB: %*ph\n",
+ prefix, scmd, r->tag, r->q, 16, scmd->cmnd);
+}
+/*
+ * For operations with an associated SCSI command, a command block is allocated
+ * at init, and managed by cmd_tagged_alloc() and cmd_tagged_free() using the
+ * block request tag as an index into a table of entries. cmd_tagged_free() is
+ * the complement, although cmd_free() may be called instead.
+ */
+static struct CommandList *cmd_tagged_alloc(struct ctlr_info *h,
+ struct scsi_cmnd *scmd)
+{
+ int idx = hpsa_get_cmd_index(scmd);
+ struct CommandList *c = h->cmd_pool + idx;
+ int refcount = 0;
+
+ if (idx < HPSA_NRESERVED_CMDS || idx >= h->nr_cmds) {
+ dev_err(&h->pdev->dev, "Bad block tag: %d not in [%d..%d]\n",
+ idx, HPSA_NRESERVED_CMDS, h->nr_cmds - 1);
+ /* The index value comes from the block layer, so if it's out of
+ * bounds, it's probably not our bug.
+ */
+ BUG();
+ }
+
+ refcount = atomic_inc_return(&c->refcount);
+ if (unlikely(!hpsa_is_cmd_idle(c))) {
+ /*
+ * We expect that the SCSI layer will hand us a unique tag
+ * value. Thus, there should never be a collision here between
+ * two requests...because if the selected command isn't idle
+ * then someone is going to be very disappointed.
+ */
+ dev_err(&h->pdev->dev,
+ "tag collision (tag=%d) in cmd_tagged_alloc().\n",
+ idx);
+ hpsa_print_scsi_cmd(h, c->scsi_cmd, "Existing");
+ hpsa_print_scsi_cmd(h, scmd, "Requesting");
+ }
+
+ hpsa_cmd_partial_init(h, idx, c);
+ return c;
+}
+
+static void cmd_tagged_free(struct ctlr_info *h, struct CommandList *c)
+{
+ /*
+ * Release our reference to the block. We don't need to do anything
+ * else to free it, because it is accessed by index. (There's no point
+ * in checking the result of the decrement, since we cannot guarantee
+ * that there isn't a concurrent abort which is also accessing it.)
+ */
+ (void)atomic_dec_and_test(&c->refcount);
+}
+
/*
* For operations that cannot sleep, a command block is allocated at init,
* and managed by cmd_alloc() and cmd_free() using a simple bitmap to track
@@ -5468,7 +5577,6 @@ static struct CommandList *cmd_alloc(struct ctlr_info *h)
{
struct CommandList *c;
int refcount, i;
- unsigned long offset;
/*
* There is some *extremely* small but non-zero chance that that
@@ -5480,31 +5588,39 @@ static struct CommandList *cmd_alloc(struct ctlr_info *h)
* very unlucky thread might be starved anyway, never able to
* beat the other threads. In reality, this happens so
* infrequently as to be indistinguishable from never.
+ *
+ * Note that we start allocating commands before the SCSI host structure
+ * is initialized. Since the search starts at bit zero, this
+ * all works, since we have at least one command structure available;
+ * however, it means that the structures with the low indexes have to be
+ * reserved for driver-initiated requests, while requests from the block
+ * layer will use the higher indexes.
*/
- offset = h->last_allocation; /* benignly racy */
for (;;) {
- i = find_next_zero_bit(h->cmd_pool_bits, h->nr_cmds, offset);
- if (unlikely(i == h->nr_cmds)) {
- offset = 0;
+ i = find_first_zero_bit(h->cmd_pool_bits, HPSA_NRESERVED_CMDS);
+ if (unlikely(i >= HPSA_NRESERVED_CMDS))
continue;
- }
c = h->cmd_pool + i;
refcount = atomic_inc_return(&c->refcount);
if (unlikely(refcount > 1)) {
cmd_free(h, c); /* already in use */
- offset = (i + 1) % h->nr_cmds;
continue;
}
set_bit(i & (BITS_PER_LONG - 1),
h->cmd_pool_bits + (i / BITS_PER_LONG));
break; /* it's ours now. */
}
- h->last_allocation = i; /* benignly racy */
hpsa_cmd_partial_init(h, i, c);
return c;
}
+/*
+ * This is the complementary operation to cmd_alloc(). Note, however, in some
+ * corner cases it may also be used to free blocks allocated by
+ * cmd_tagged_alloc() in which case the ref-count decrement does the trick and
+ * the clear-bit is harmless.
+ */
static void cmd_free(struct ctlr_info *h, struct CommandList *c)
{
if (atomic_dec_and_test(&c->refcount)) {
diff --git a/drivers/scsi/hpsa.h b/drivers/scsi/hpsa.h
index 3ec8934..2536b67 100644
--- a/drivers/scsi/hpsa.h
+++ b/drivers/scsi/hpsa.h
@@ -141,7 +141,6 @@ struct ctlr_info {
struct CfgTable __iomem *cfgtable;
int interrupts_enabled;
int max_commands;
- int last_allocation;
atomic_t commands_outstanding;
# define PERF_MODE_INT 0
# define DOORBELL_INT 1
^ permalink raw reply related [flat|nested] 58+ messages in thread* Re: [PATCH 37/43] hpsa: use block layer tag for command allocation
2015-02-21 22:20 ` [PATCH 37/43] hpsa: use block layer tag for command allocation Don Brace
@ 2015-02-23 20:25 ` Christoph Hellwig
2015-02-24 20:51 ` brace
0 siblings, 1 reply; 58+ messages in thread
From: Christoph Hellwig @ 2015-02-23 20:25 UTC (permalink / raw)
To: Don Brace
Cc: scott.teel, Kevin.Barnett, james.bottomley, hch, Justin.Lindley,
brace, linux-scsi
> @@ -4691,27 +4701,31 @@ static int hpsa_scsi_queue_command(struct Scsi_Host *sh, struct scsi_cmnd *cmd)
>
> /* Get the ptr to our adapter structure out of cmd->host. */
> h = sdev_to_hba(cmd->device);
> - dev = cmd->device->hostdata;
> - if (!dev) {
> +
> + if (cmd->request->tag < 0) {
> + dev_crit(&h->pdev->dev,
> + "sdev %p scmd %p: bad tag %d -- rejecting\n",
> + cmd->device, cmd, cmd->request->tag);
> cmd->result = DID_NO_CONNECT << 16;
> cmd->scsi_done(cmd);
> return 0;
Shouldn't happen with a modern kernel, but if you really want to
assert this I'd recommend a BUG_ON().
> - if (unlikely(lockup_detected(h))) {
> + dev = cmd->device->hostdata;
> + if (!dev) {
> cmd->result = DID_NO_CONNECT << 16;
> cmd->scsi_done(cmd);
> return 0;
> }
How could this happen (see my earlier question in one of the first
patches).
> @@ -4838,6 +4852,11 @@ static int hpsa_register_scsi(struct ctlr_info *h)
> sh->hostdata[0] = (unsigned long) h;
> sh->irq = h->intr[h->intr_mode];
> sh->unique_id = sh->irq;
> + if (!shost_use_blk_mq(sh)) {
> + error = scsi_init_shared_tag_map(sh, sh->can_queue);
> + if (error)
> + goto fail_host_put;
> + }
scsi_init_shared_tag_map alredy has the blk-mq check, so you can call
it unconditionally.
> +static void hpsa_print_scsi_cmd(struct ctlr_info *h, struct scsi_cmnd *scmd,
> + char *prefix)
Maybe just use scsi_print_command?
> +static void cmd_tagged_free(struct ctlr_info *h, struct CommandList *c)
> +{
> + /*
> + * Release our reference to the block. We don't need to do anything
> + * else to free it, because it is accessed by index. (There's no point
> + * in checking the result of the decrement, since we cannot guarantee
> + * that there isn't a concurrent abort which is also accessing it.)
> + */
> + (void)atomic_dec_and_test(&c->refcount);
Just use atomic_dec().
Any reason you're implementing your own allocator instead of setting
->cmd_size?
^ permalink raw reply [flat|nested] 58+ messages in thread* RE: [PATCH 37/43] hpsa: use block layer tag for command allocation
2015-02-23 20:25 ` Christoph Hellwig
@ 2015-02-24 20:51 ` brace
0 siblings, 0 replies; 58+ messages in thread
From: brace @ 2015-02-24 20:51 UTC (permalink / raw)
To: Christoph Hellwig
Cc: Scott Teel, Kevin Barnett, james.bottomley@parallels.com,
Justin Lindley, brace, linux-scsi@vger.kernel.org
> -----Original Message-----
> From: Christoph Hellwig [mailto:hch@infradead.org]
> Sent: Monday, February 23, 2015 2:25 PM
> To: Don Brace
> Cc: Scott Teel; Kevin Barnett; james.bottomley@parallels.com;
> hch@infradead.org; Justin Lindley; brace; linux-scsi@vger.kernel.org
> Subject: Re: [PATCH 37/43] hpsa: use block layer tag for command allocation
>
> > @@ -4691,27 +4701,31 @@ static int hpsa_scsi_queue_command(struct
> Scsi_Host *sh, struct scsi_cmnd *cmd)
> >
> > /* Get the ptr to our adapter structure out of cmd->host. */
> > h = sdev_to_hba(cmd->device);
> > - dev = cmd->device->hostdata;
> > - if (!dev) {
> > +
> > + if (cmd->request->tag < 0) {
> > + dev_crit(&h->pdev->dev,
> > + "sdev %p scmd %p: bad tag %d -- rejecting\n",
> > + cmd->device, cmd, cmd->request->tag);
> > cmd->result = DID_NO_CONNECT << 16;
> > cmd->scsi_done(cmd);
> > return 0;
>
> Shouldn't happen with a modern kernel, but if you really want to
> assert this I'd recommend a BUG_ON().
>
Done. Left over from early block tag adoption.
> > - if (unlikely(lockup_detected(h))) {
> > + dev = cmd->device->hostdata;
> > + if (!dev) {
> > cmd->result = DID_NO_CONNECT << 16;
> > cmd->scsi_done(cmd);
> > return 0;
> > }
>
> How could this happen (see my earlier question in one of the first
> patches).
This has happened to us in the past. I'd like to leave it in for now.
>
> > @@ -4838,6 +4852,11 @@ static int hpsa_register_scsi(struct ctlr_info *h)
> > sh->hostdata[0] = (unsigned long) h;
> > sh->irq = h->intr[h->intr_mode];
> > sh->unique_id = sh->irq;
> > + if (!shost_use_blk_mq(sh)) {
> > + error = scsi_init_shared_tag_map(sh, sh->can_queue);
> > + if (error)
> > + goto fail_host_put;
> > + }
>
> scsi_init_shared_tag_map alredy has the blk-mq check, so you can call
> it unconditionally.
>
> > +static void hpsa_print_scsi_cmd(struct ctlr_info *h, struct scsi_cmnd *scmd,
> > + char *prefix)
>
> Maybe just use scsi_print_command?
Done.
>
> > +static void cmd_tagged_free(struct ctlr_info *h, struct CommandList *c)
> > +{
> > + /*
> > + * Release our reference to the block. We don't need to do anything
> > + * else to free it, because it is accessed by index. (There's no point
> > + * in checking the result of the decrement, since we cannot guarantee
> > + * that there isn't a concurrent abort which is also accessing it.)
> > + */
> > + (void)atomic_dec_and_test(&c->refcount);
>
> Just use atomic_dec().
>
> Any reason you're implementing your own allocator instead of setting
> ->cmd_size?
I need to do some more work on command management. Our legacy driver still has to manage its own allocation. Would like to leave this alone for now.
^ permalink raw reply [flat|nested] 58+ messages in thread
* [PATCH 38/43] hpsa: clean up new block layer tag error handling
2015-02-21 22:17 [PATCH 00/43] hpsa updates Don Brace
` (36 preceding siblings ...)
2015-02-21 22:20 ` [PATCH 37/43] hpsa: use block layer tag for command allocation Don Brace
@ 2015-02-21 22:20 ` Don Brace
2015-02-23 20:25 ` Christoph Hellwig
2015-02-21 22:21 ` [PATCH 39/43] hpsa: use scsi host_no as hpsa controller number Don Brace
` (4 subsequent siblings)
42 siblings, 1 reply; 58+ messages in thread
From: Don Brace @ 2015-02-21 22:20 UTC (permalink / raw)
To: scott.teel, Kevin.Barnett, james.bottomley, hch, Justin.Lindley,
brace
Cc: linux-scsi
From: Robert Elliott <elliott@hp.com>
clean up new block layer tag error handling
Reviewed-by: Scott Teel <scott.teel@pmcs.com>
Reviewed-by: Kevin Barnett <kevin.barnett@pmcs.com>
Signed-off-by: Robert Elliott <elliott@hp.com>
Signed-off-by: Don Brace <don.brace@pmcs.com>
---
drivers/scsi/hpsa.c | 13 +++++++++----
1 file changed, 9 insertions(+), 4 deletions(-)
diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index 8f1b0e6..c491bed 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -4854,18 +4854,23 @@ static int hpsa_register_scsi(struct ctlr_info *h)
sh->unique_id = sh->irq;
if (!shost_use_blk_mq(sh)) {
error = scsi_init_shared_tag_map(sh, sh->can_queue);
- if (error)
+ if (error) {
+ dev_err(&h->pdev->dev,
+ "%s: scsi_init_shared_tag_map failed for controller %d\n",
+ __func__, h->ctlr);
goto fail_host_put;
+ }
}
error = scsi_add_host(sh, &h->pdev->dev);
- if (error)
+ if (error) {
+ dev_err(&h->pdev->dev, "%s: scsi_add_host failed for controller %d\n",
+ __func__, h->ctlr);
goto fail_host_put;
+ }
scsi_scan_host(sh);
return 0;
fail_host_put:
- dev_err(&h->pdev->dev, "%s: scsi_add_host"
- " failed for controller %d\n", __func__, h->ctlr);
scsi_host_put(sh);
return error;
fail:
^ permalink raw reply related [flat|nested] 58+ messages in thread* Re: [PATCH 38/43] hpsa: clean up new block layer tag error handling
2015-02-21 22:20 ` [PATCH 38/43] hpsa: clean up new block layer tag error handling Don Brace
@ 2015-02-23 20:25 ` Christoph Hellwig
2015-02-24 17:39 ` brace
0 siblings, 1 reply; 58+ messages in thread
From: Christoph Hellwig @ 2015-02-23 20:25 UTC (permalink / raw)
To: Don Brace
Cc: scott.teel, Kevin.Barnett, james.bottomley, hch, Justin.Lindley,
brace, linux-scsi
This needs to be folded into the previous patch.
^ permalink raw reply [flat|nested] 58+ messages in thread
* RE: [PATCH 38/43] hpsa: clean up new block layer tag error handling
2015-02-23 20:25 ` Christoph Hellwig
@ 2015-02-24 17:39 ` brace
0 siblings, 0 replies; 58+ messages in thread
From: brace @ 2015-02-24 17:39 UTC (permalink / raw)
To: Christoph Hellwig
Cc: Scott Teel, Kevin Barnett, james.bottomley@parallels.com,
Justin Lindley, brace, linux-scsi@vger.kernel.org
Done.
> -----Original Message-----
> From: Christoph Hellwig [mailto:hch@infradead.org]
> Sent: Monday, February 23, 2015 2:26 PM
> To: Don Brace
> Cc: Scott Teel; Kevin Barnett; james.bottomley@parallels.com;
> hch@infradead.org; Justin Lindley; brace; linux-scsi@vger.kernel.org
> Subject: Re: [PATCH 38/43] hpsa: clean up new block layer tag error handling
>
> This needs to be folded into the previous patch.
^ permalink raw reply [flat|nested] 58+ messages in thread
* [PATCH 39/43] hpsa: use scsi host_no as hpsa controller number
2015-02-21 22:17 [PATCH 00/43] hpsa updates Don Brace
` (37 preceding siblings ...)
2015-02-21 22:20 ` [PATCH 38/43] hpsa: clean up new block layer tag error handling Don Brace
@ 2015-02-21 22:21 ` Don Brace
2015-02-21 22:21 ` [PATCH 40/43] hpsa: cleanup initialization code Don Brace
` (3 subsequent siblings)
42 siblings, 0 replies; 58+ messages in thread
From: Don Brace @ 2015-02-21 22:21 UTC (permalink / raw)
To: scott.teel, Kevin.Barnett, james.bottomley, hch, Justin.Lindley,
brace
Cc: linux-scsi
From: Robert Elliott <elliott@hp.com>
Rather than numbering the hpsa controllers with an
incrementing 0..n value (e.g., that shows up in
/proc/interrupts), use the scsi midlayer
host_no (e.g. matching /sys/class/scsi_host/hostNN).
Reviewed-by: Scott Teel <scott.teel@pmcs.com>
Reviewed-by: Kevin Barnett <kevin.barnett@pmcs.com>
Signed-off-by: Robert Elliott <elliott@hp.com>
Signed-off-by: Don Brace <don.brace@pmcs.com>
---
drivers/scsi/hpsa.c | 137 ++++++++++++++++++++++++++++-----------------------
1 file changed, 75 insertions(+), 62 deletions(-)
diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index c491bed..ffdfa55 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -330,32 +330,35 @@ static int check_for_unit_attention(struct ctlr_info *h,
switch (asc) {
case STATE_CHANGED:
dev_warn(&h->pdev->dev,
- HPSA "%d: a state change detected, command retried\n",
- h->ctlr);
+ "%s: a state change detected, command retried\n",
+ h->devname);
break;
case LUN_FAILED:
dev_warn(&h->pdev->dev,
- HPSA "%d: LUN failure detected\n", h->ctlr);
+ "%s: LUN failure detected\n", h->devname);
break;
case REPORT_LUNS_CHANGED:
dev_warn(&h->pdev->dev,
- HPSA "%d: report LUN data changed\n", h->ctlr);
+ "%s: report LUN data changed\n", h->devname);
/*
* Note: this REPORT_LUNS_CHANGED condition only occurs on the external
* target (array) devices.
*/
break;
case POWER_OR_RESET:
- dev_warn(&h->pdev->dev, HPSA "%d: a power on "
- "or device reset detected\n", h->ctlr);
+ dev_warn(&h->pdev->dev,
+ "%s: a power on or device reset detected\n",
+ h->devname);
break;
case UNIT_ATTENTION_CLEARED:
- dev_warn(&h->pdev->dev, HPSA "%d: unit attention "
- "cleared by another initiator\n", h->ctlr);
+ dev_warn(&h->pdev->dev,
+ "%s: unit attention cleared by another initiator\n",
+ h->devname);
break;
default:
- dev_warn(&h->pdev->dev, HPSA "%d: unknown "
- "unit attention detected\n", h->ctlr);
+ dev_warn(&h->pdev->dev,
+ "%s: unknown unit attention detected\n",
+ h->devname);
break;
}
return 1;
@@ -4821,22 +4824,15 @@ static int hpsa_scan_finished(struct Scsi_Host *sh,
return finished;
}
-static void hpsa_unregister_scsi(struct ctlr_info *h)
-{
- /* we are being forcibly unloaded, and may not refuse. */
- scsi_remove_host(h->scsi_host);
- scsi_host_put(h->scsi_host);
- h->scsi_host = NULL;
-}
-
-static int hpsa_register_scsi(struct ctlr_info *h)
+static int hpsa_scsi_host_alloc(struct ctlr_info *h)
{
struct Scsi_Host *sh;
- int error;
sh = scsi_host_alloc(&hpsa_driver_template, sizeof(h));
- if (sh == NULL)
- goto fail;
+ if (sh == NULL) {
+ dev_err(&h->pdev->dev, "scsi_host_alloc failed\n");
+ return -ENOMEM;
+ }
sh->io_port = 0;
sh->n_io_port = 0;
@@ -4848,35 +4844,35 @@ static int hpsa_register_scsi(struct ctlr_info *h)
sh->can_queue = h->nr_cmds - HPSA_NRESERVED_CMDS;
sh->cmd_per_lun = sh->can_queue;
sh->sg_tablesize = h->maxsgentries;
- h->scsi_host = sh;
sh->hostdata[0] = (unsigned long) h;
sh->irq = h->intr[h->intr_mode];
sh->unique_id = sh->irq;
if (!shost_use_blk_mq(sh)) {
- error = scsi_init_shared_tag_map(sh, sh->can_queue);
+ int error = scsi_init_shared_tag_map(sh, sh->can_queue);
+
if (error) {
dev_err(&h->pdev->dev,
"%s: scsi_init_shared_tag_map failed for controller %d\n",
__func__, h->ctlr);
- goto fail_host_put;
+ scsi_host_put(sh);
+ return error;
}
}
- error = scsi_add_host(sh, &h->pdev->dev);
- if (error) {
- dev_err(&h->pdev->dev, "%s: scsi_add_host failed for controller %d\n",
- __func__, h->ctlr);
- goto fail_host_put;
- }
- scsi_scan_host(sh);
+ h->scsi_host = sh;
return 0;
+}
- fail_host_put:
- scsi_host_put(sh);
- return error;
- fail:
- dev_err(&h->pdev->dev, "%s: scsi_host_alloc"
- " failed for controller %d\n", __func__, h->ctlr);
- return -ENOMEM;
+static int hpsa_scsi_add_host(struct ctlr_info *h)
+{
+ int rv;
+
+ rv = scsi_add_host(h->scsi_host, &h->pdev->dev);
+ if (rv) {
+ dev_err(&h->pdev->dev, "scsi_add_host failed\n");
+ return rv;
+ }
+ scsi_scan_host(h->scsi_host);
+ return 0;
}
/*
@@ -7569,7 +7565,9 @@ static void hpsa_undo_allocations_after_kdump_soft_reset(struct ctlr_info *h)
hpsa_free_sg_chain_blocks(h); /* init_one 6 */
hpsa_free_cmd_pool(h); /* init_one 5 */
hpsa_free_irqs(h); /* init_one 4 */
- hpsa_free_pci_init(h); /* init_one 3 */
+ scsi_host_put(h->scsi_host); /* init_one 3 */
+ h->scsi_host = NULL; /* init_one 3 */
+ hpsa_free_pci_init(h); /* init_one 2_5 */
free_percpu(h->lockup_detected); /* init_one 2 */
h->lockup_detected = NULL; /* init_one 2 */
if (h->resubmit_wq) {
@@ -7873,9 +7871,15 @@ reinit_after_soft_reset:
rc = hpsa_pci_init(h);
if (rc)
- goto clean2; /* lockup, aer/h */
+ goto clean2; /* lu, aer/h */
- sprintf(h->devname, HPSA "%d", number_of_controllers);
+ /* relies on h-> settings made by hpsa_pci_init, including
+ * interrupt_mode h->intr */
+ rc = hpsa_scsi_host_alloc(h);
+ if (rc)
+ goto clean2_5; /* pci, lu, aer/h */
+
+ sprintf(h->devname, HPSA "%d", h->scsi_host->host_no);
h->ctlr = number_of_controllers;
number_of_controllers++;
@@ -7889,7 +7893,7 @@ reinit_after_soft_reset:
dac = 0;
} else {
dev_err(&pdev->dev, "no suitable DMA available\n");
- goto clean3; /* pci, lockup, aer/h */
+ goto clean3; /* shost, pci, lu, aer/h */
}
}
@@ -7898,13 +7902,13 @@ reinit_after_soft_reset:
rc = hpsa_request_irqs(h, do_hpsa_intr_msi, do_hpsa_intr_intx);
if (rc)
- goto clean3; /* pci, lockup, aer/h */
+ goto clean3; /* shost, pci, lu, aer/h */
rc = hpsa_alloc_cmd_pool(h);
if (rc)
- goto clean4; /* irq, pci, lockup, aer/h */
+ goto clean4; /* irq, shost, pci, lu, aer/h */
rc = hpsa_alloc_sg_chain_blocks(h);
if (rc)
- goto clean5; /* cmd, irq, pci, lockup, aer/h */
+ goto clean5; /* cmd, irq, shost, pci, lu, aer/h */
init_waitqueue_head(&h->scan_wait_queue);
init_waitqueue_head(&h->abort_cmd_wait_queue);
init_waitqueue_head(&h->abort_sync_wait_queue);
@@ -7913,11 +7917,16 @@ reinit_after_soft_reset:
pci_set_drvdata(pdev, h);
h->ndevices = 0;
h->hba_mode_enabled = 0;
- h->scsi_host = NULL;
+
spin_lock_init(&h->devlock);
rc = hpsa_put_ctlr_into_performant_mode(h);
if (rc)
- goto clean6; /* sg, cmd, irq, pci, lockup, aer/h */
+ goto clean6; /* sg, cmd, irq, shost, pci, lu, aer/h */
+
+ /* hook into SCSI subsystem */
+ rc = hpsa_scsi_add_host(h);
+ if (rc)
+ goto clean7; /* perf, sg, cmd, irq, shost, pci, lu, aer/h */
/* create the resubmit workqueue */
h->rescan_ctlr_wq = hpsa_create_controller_wq(h, "rescan");
@@ -7972,7 +7981,7 @@ reinit_after_soft_reset:
rc = hpsa_kdump_soft_reset(h);
if (rc)
/* Neither hard nor soft reset worked, we're hosed. */
- goto clean8;
+ goto clean9;
dev_info(&h->pdev->dev, "Board READY.\n");
dev_info(&h->pdev->dev,
@@ -8007,9 +8016,6 @@ reinit_after_soft_reset:
h->access.set_intr_mask(h, HPSA_INTR_ON);
hpsa_hba_inquiry(h);
- rc = hpsa_register_scsi(h); /* hook ourselves into SCSI subsystem */
- if (rc)
- goto clean8; /* wq, perf, sg, cmd, irq, pci, lockup, aer/h */
/* Monitor the controller for firmware lockups */
h->heartbeat_sample_interval = HEARTBEAT_SAMPLE_INTERVAL;
@@ -8021,20 +8027,23 @@ reinit_after_soft_reset:
h->heartbeat_sample_interval);
return 0;
-clean8: /* perf, sg, cmd, irq, pci, lockup, aer/h */
+clean9: /* wq, sh, perf, sg, cmd, irq, shost, pci, lu, aer/h */
kfree(h->hba_inquiry_data);
-clean7: /* perf, sg, cmd, irq, pci, lockup, aer/h */
+clean7: /* perf, sg, cmd, irq, shost, pci, lu, aer/h */
hpsa_free_performant_mode(h);
h->access.set_intr_mask(h, HPSA_INTR_OFF);
clean6: /* sg, cmd, irq, pci, lockup, wq/aer/h */
hpsa_free_sg_chain_blocks(h);
-clean5: /* cmd, irq, pci, lockup, aer/h */
+clean5: /* cmd, irq, shost, pci, lu, aer/h */
hpsa_free_cmd_pool(h);
-clean4: /* irq, pci, lockup, aer/h */
+clean4: /* irq, shost, pci, lu, aer/h */
hpsa_free_irqs(h);
-clean3: /* pci, lockup, aer/h */
+clean3: /* shost, pci, lu, aer/h */
+ scsi_host_put(h->scsi_host);
+ h->scsi_host = NULL;
+clean2_5: /* pci, lu, aer/h */
hpsa_free_pci_init(h);
-clean2: /* lockup, aer/h */
+clean2: /* lu, aer/h */
if (h->lockup_detected) {
free_percpu(h->lockup_detected);
h->lockup_detected = NULL;
@@ -8133,17 +8142,21 @@ static void hpsa_remove_one(struct pci_dev *pdev)
hpsa_free_device_info(h); /* scan */
- hpsa_unregister_scsi(h); /* init_one 9 */
- kfree(h->hba_inquiry_data); /* init_one 9 */
- h->hba_inquiry_data = NULL; /* init_one 9 */
+ kfree(h->hba_inquiry_data); /* init_one 10 */
+ h->hba_inquiry_data = NULL; /* init_one 10 */
+ scsi_remove_host(h->scsi_host); /* init_one 8 */
+ hpsa_free_ioaccel2_sg_chain_blocks(h);
hpsa_free_performant_mode(h); /* init_one 7 */
hpsa_free_sg_chain_blocks(h); /* init_one 6 */
hpsa_free_cmd_pool(h); /* init_one 5 */
/* hpsa_free_irqs already called via hpsa_shutdown init_one 4 */
+ scsi_host_put(h->scsi_host); /* init_one 3 */
+ h->scsi_host = NULL; /* init_one 3 */
+
/* includes hpsa_disable_interrupt_mode - pci_init 2 */
- hpsa_free_pci_init(h); /* init_one 3 */
+ hpsa_free_pci_init(h); /* init_one 2.5 */
free_percpu(h->lockup_detected); /* init_one 2 */
h->lockup_detected = NULL; /* init_one 2 */
^ permalink raw reply related [flat|nested] 58+ messages in thread* [PATCH 40/43] hpsa: cleanup initialization code.
2015-02-21 22:17 [PATCH 00/43] hpsa updates Don Brace
` (38 preceding siblings ...)
2015-02-21 22:21 ` [PATCH 39/43] hpsa: use scsi host_no as hpsa controller number Don Brace
@ 2015-02-21 22:21 ` Don Brace
2015-02-23 20:26 ` Christoph Hellwig
2015-02-21 22:21 ` [PATCH 41/43] hpsa: propagate the error code in hpsa_kdump_soft_reset Don Brace
` (2 subsequent siblings)
42 siblings, 1 reply; 58+ messages in thread
From: Don Brace @ 2015-02-21 22:21 UTC (permalink / raw)
To: scott.teel, Kevin.Barnett, james.bottomley, hch, Justin.Lindley,
brace
Cc: linux-scsi
- remove goto clean_X labels
- avoid duplication of cleanup code
Reviewed-by: Scott Teel <scott.teel@pmcs.com>
Reviewed-by: Kevin Barnett <kevin.barnett@pmcs.com>
Signed-off-by: Don Brace <don.brace@pmcs.com>
---
drivers/scsi/hpsa.c | 188 +++++++++++++++++++--------------------------------
drivers/scsi/hpsa.h | 1
2 files changed, 70 insertions(+), 119 deletions(-)
diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index ffdfa55..8a4c3f2 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -7519,6 +7519,9 @@ static int hpsa_request_irqs(struct ctlr_info *h,
hpsa_free_irqs(h);
return -ENODEV;
}
+
+ h->request_irq_called = 1;
+
return 0;
}
@@ -7559,27 +7562,6 @@ static void hpsa_free_reply_queues(struct ctlr_info *h)
h->reply_queue_size = 0;
}
-static void hpsa_undo_allocations_after_kdump_soft_reset(struct ctlr_info *h)
-{
- hpsa_free_performant_mode(h); /* init_one 7 */
- hpsa_free_sg_chain_blocks(h); /* init_one 6 */
- hpsa_free_cmd_pool(h); /* init_one 5 */
- hpsa_free_irqs(h); /* init_one 4 */
- scsi_host_put(h->scsi_host); /* init_one 3 */
- h->scsi_host = NULL; /* init_one 3 */
- hpsa_free_pci_init(h); /* init_one 2_5 */
- free_percpu(h->lockup_detected); /* init_one 2 */
- h->lockup_detected = NULL; /* init_one 2 */
- if (h->resubmit_wq) {
- destroy_workqueue(h->resubmit_wq); /* init_one 1 */
- h->resubmit_wq = NULL;
- }
- if (h->rescan_ctlr_wq) {
- destroy_workqueue(h->rescan_ctlr_wq);
- h->rescan_ctlr_wq = NULL;
- }
- kfree(h); /* init_one 1 */
-}
/* Called when controller lockup detected. */
static void fail_all_outstanding_cmds(struct ctlr_info *h)
@@ -7814,6 +7796,46 @@ static struct workqueue_struct *hpsa_create_controller_wq(struct ctlr_info *h,
return wq;
}
+static int hpsa_init_cleanup(struct ctlr_info *h, int rc)
+{
+
+ if (h->rescan_ctlr_wq) {
+ destroy_workqueue(h->rescan_ctlr_wq);
+ h->rescan_ctlr_wq = NULL;
+ }
+
+ if (h->resubmit_wq) {
+ destroy_workqueue(h->resubmit_wq);
+ h->resubmit_wq = NULL;
+ }
+
+ wait_event_interruptible(h->scan_wait_queue,
+ test_bit(0,
+ (unsigned long *)&h->scan_finished));
+
+ hpsa_free_performant_mode(h);
+ hpsa_free_ioaccel2_sg_chain_blocks(h);
+ hpsa_free_sg_chain_blocks(h);
+ hpsa_free_cmd_pool(h);
+ if (h->request_irq_called)
+ hpsa_free_irqs(h);
+ if (h->scsi_host) {
+ scsi_remove_host(h->scsi_host);
+ scsi_host_put(h->scsi_host);
+ h->scsi_host = NULL;
+ }
+ hpsa_free_pci_init(h);
+ if (h->lockup_detected) {
+ free_percpu(h->lockup_detected);
+ h->lockup_detected = NULL;
+ }
+ kfree(h->hba_inquiry_data);
+ h->hba_inquiry_data = NULL;
+ kfree(h);
+
+ return rc;
+}
+
static int hpsa_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
{
int dac, rc;
@@ -7864,20 +7886,19 @@ reinit_after_soft_reset:
h->lockup_detected = alloc_percpu(u32);
if (!h->lockup_detected) {
dev_err(&h->pdev->dev, "Failed to allocate lockup detector\n");
- rc = -ENOMEM;
- goto clean1; /* aer/h */
+ return -ENOMEM;
}
set_lockup_detected_for_all_cpus(h, 0);
rc = hpsa_pci_init(h);
if (rc)
- goto clean2; /* lu, aer/h */
+ return hpsa_init_cleanup(h, rc);
/* relies on h-> settings made by hpsa_pci_init, including
* interrupt_mode h->intr */
rc = hpsa_scsi_host_alloc(h);
if (rc)
- goto clean2_5; /* pci, lu, aer/h */
+ return hpsa_init_cleanup(h, rc);
sprintf(h->devname, HPSA "%d", h->scsi_host->host_no);
h->ctlr = number_of_controllers;
@@ -7893,7 +7914,7 @@ reinit_after_soft_reset:
dac = 0;
} else {
dev_err(&pdev->dev, "no suitable DMA available\n");
- goto clean3; /* shost, pci, lu, aer/h */
+ return hpsa_init_cleanup(h, rc);
}
}
@@ -7902,13 +7923,13 @@ reinit_after_soft_reset:
rc = hpsa_request_irqs(h, do_hpsa_intr_msi, do_hpsa_intr_intx);
if (rc)
- goto clean3; /* shost, pci, lu, aer/h */
+ return hpsa_init_cleanup(h, rc);
rc = hpsa_alloc_cmd_pool(h);
if (rc)
- goto clean4; /* irq, shost, pci, lu, aer/h */
+ return hpsa_init_cleanup(h, rc);
rc = hpsa_alloc_sg_chain_blocks(h);
if (rc)
- goto clean5; /* cmd, irq, shost, pci, lu, aer/h */
+ return hpsa_init_cleanup(h, rc);
init_waitqueue_head(&h->scan_wait_queue);
init_waitqueue_head(&h->abort_cmd_wait_queue);
init_waitqueue_head(&h->abort_sync_wait_queue);
@@ -7921,28 +7942,22 @@ reinit_after_soft_reset:
spin_lock_init(&h->devlock);
rc = hpsa_put_ctlr_into_performant_mode(h);
if (rc)
- goto clean6; /* sg, cmd, irq, shost, pci, lu, aer/h */
+ return hpsa_init_cleanup(h, rc);
- /* hook into SCSI subsystem */
- rc = hpsa_scsi_add_host(h);
- if (rc)
- goto clean7; /* perf, sg, cmd, irq, shost, pci, lu, aer/h */
-
- /* create the resubmit workqueue */
h->rescan_ctlr_wq = hpsa_create_controller_wq(h, "rescan");
- if (!h->rescan_ctlr_wq) {
- rc = -ENOMEM;
- goto clean7;
- }
+ if (!h->rescan_ctlr_wq)
+ return hpsa_init_cleanup(h, -ENOMEM);
h->resubmit_wq = hpsa_create_controller_wq(h, "resubmit");
- if (!h->resubmit_wq) {
- rc = -ENOMEM;
- goto clean7; /* aer/h */
- }
+ if (!h->resubmit_wq)
+ return hpsa_init_cleanup(h, -ENOMEM);
- /*
- * At this point, the controller is ready to take commands.
+ /* hook into SCSI subsystem */
+ rc = hpsa_scsi_add_host(h);
+ if (rc)
+ return hpsa_init_cleanup(h, rc);
+
+ /* At this point, the controller is ready to take commands.
* Now, if reset_devices and the hard reset didn't work, try
* the soft reset and see if that works.
*/
@@ -7964,24 +7979,12 @@ reinit_after_soft_reset:
if (rc) {
dev_warn(&h->pdev->dev,
"Failed to request_irq after soft reset.\n");
- /*
- * cannot goto clean7 or free_irqs will be called
- * again. Instead, do its work
- */
- hpsa_free_performant_mode(h); /* clean7 */
- hpsa_free_sg_chain_blocks(h); /* clean6 */
- hpsa_free_cmd_pool(h); /* clean5 */
- /*
- * skip hpsa_free_irqs(h) clean4 since that
- * was just called before request_irqs failed
- */
- goto clean3;
+ return hpsa_init_cleanup(h, rc);
}
rc = hpsa_kdump_soft_reset(h);
- if (rc)
- /* Neither hard nor soft reset worked, we're hosed. */
- goto clean9;
+ if (rc) /* Neither hard nor soft reset worked, we're hosed. */
+ return hpsa_init_cleanup(h, rc);
dev_info(&h->pdev->dev, "Board READY.\n");
dev_info(&h->pdev->dev,
@@ -7999,11 +8002,12 @@ reinit_after_soft_reset:
* everything. Easiest to just forget what we've done and do it
* all over again.
*/
- hpsa_undo_allocations_after_kdump_soft_reset(h);
+ hpsa_init_cleanup(h, 0);
try_soft_reset = 0;
- if (rc)
- /* don't goto clean, we already unallocated */
+ if (rc) {
+ /* There is nothing to clean up, just return */
return -ENODEV;
+ }
goto reinit_after_soft_reset;
}
@@ -8026,39 +8030,6 @@ reinit_after_soft_reset:
queue_delayed_work(h->rescan_ctlr_wq, &h->rescan_ctlr_work,
h->heartbeat_sample_interval);
return 0;
-
-clean9: /* wq, sh, perf, sg, cmd, irq, shost, pci, lu, aer/h */
- kfree(h->hba_inquiry_data);
-clean7: /* perf, sg, cmd, irq, shost, pci, lu, aer/h */
- hpsa_free_performant_mode(h);
- h->access.set_intr_mask(h, HPSA_INTR_OFF);
-clean6: /* sg, cmd, irq, pci, lockup, wq/aer/h */
- hpsa_free_sg_chain_blocks(h);
-clean5: /* cmd, irq, shost, pci, lu, aer/h */
- hpsa_free_cmd_pool(h);
-clean4: /* irq, shost, pci, lu, aer/h */
- hpsa_free_irqs(h);
-clean3: /* shost, pci, lu, aer/h */
- scsi_host_put(h->scsi_host);
- h->scsi_host = NULL;
-clean2_5: /* pci, lu, aer/h */
- hpsa_free_pci_init(h);
-clean2: /* lu, aer/h */
- if (h->lockup_detected) {
- free_percpu(h->lockup_detected);
- h->lockup_detected = NULL;
- }
-clean1: /* wq/aer/h */
- if (h->resubmit_wq) {
- destroy_workqueue(h->resubmit_wq);
- h->resubmit_wq = NULL;
- }
- if (h->rescan_ctlr_wq) {
- destroy_workqueue(h->rescan_ctlr_wq);
- h->rescan_ctlr_wq = NULL;
- }
- kfree(h);
- return rc;
}
static void hpsa_flush_cache(struct ctlr_info *h)
@@ -8133,8 +8104,6 @@ static void hpsa_remove_one(struct pci_dev *pdev)
spin_unlock_irqrestore(&h->lock, flags);
cancel_delayed_work_sync(&h->monitor_ctlr_work);
cancel_delayed_work_sync(&h->rescan_ctlr_work);
- destroy_workqueue(h->rescan_ctlr_wq);
- destroy_workqueue(h->resubmit_wq);
/* includes hpsa_free_irqs - init_one 4 */
/* includes hpsa_disable_interrupt_mode - pci_init 2 */
@@ -8142,26 +8111,7 @@ static void hpsa_remove_one(struct pci_dev *pdev)
hpsa_free_device_info(h); /* scan */
- kfree(h->hba_inquiry_data); /* init_one 10 */
- h->hba_inquiry_data = NULL; /* init_one 10 */
- scsi_remove_host(h->scsi_host); /* init_one 8 */
- hpsa_free_ioaccel2_sg_chain_blocks(h);
- hpsa_free_performant_mode(h); /* init_one 7 */
- hpsa_free_sg_chain_blocks(h); /* init_one 6 */
- hpsa_free_cmd_pool(h); /* init_one 5 */
-
- /* hpsa_free_irqs already called via hpsa_shutdown init_one 4 */
-
- scsi_host_put(h->scsi_host); /* init_one 3 */
- h->scsi_host = NULL; /* init_one 3 */
-
- /* includes hpsa_disable_interrupt_mode - pci_init 2 */
- hpsa_free_pci_init(h); /* init_one 2.5 */
-
- free_percpu(h->lockup_detected); /* init_one 2 */
- h->lockup_detected = NULL; /* init_one 2 */
- /* (void) pci_disable_pcie_error_reporting(pdev); */ /* init_one 1 */
- kfree(h); /* init_one 1 */
+ hpsa_init_cleanup(h, 0);
}
static int hpsa_suspend(__attribute__((unused)) struct pci_dev *pdev,
diff --git a/drivers/scsi/hpsa.h b/drivers/scsi/hpsa.h
index 2536b67..b1ae888 100644
--- a/drivers/scsi/hpsa.h
+++ b/drivers/scsi/hpsa.h
@@ -140,6 +140,7 @@ struct ctlr_info {
#define HPSA_CMDS_RESERVED_FOR_DRIVER 1
struct CfgTable __iomem *cfgtable;
int interrupts_enabled;
+ int request_irq_called;
int max_commands;
atomic_t commands_outstanding;
# define PERF_MODE_INT 0
^ permalink raw reply related [flat|nested] 58+ messages in thread* Re: [PATCH 40/43] hpsa: cleanup initialization code.
2015-02-21 22:21 ` [PATCH 40/43] hpsa: cleanup initialization code Don Brace
@ 2015-02-23 20:26 ` Christoph Hellwig
2015-02-24 21:29 ` brace
0 siblings, 1 reply; 58+ messages in thread
From: Christoph Hellwig @ 2015-02-23 20:26 UTC (permalink / raw)
To: Don Brace
Cc: scott.teel, Kevin.Barnett, james.bottomley, hch, Justin.Lindley,
brace, linux-scsi
This is a backwards change. Please keep the goto unwinding (maybe with
some better label names) instead of introducing the if allocated free pattern.
^ permalink raw reply [flat|nested] 58+ messages in thread
* RE: [PATCH 40/43] hpsa: cleanup initialization code.
2015-02-23 20:26 ` Christoph Hellwig
@ 2015-02-24 21:29 ` brace
0 siblings, 0 replies; 58+ messages in thread
From: brace @ 2015-02-24 21:29 UTC (permalink / raw)
To: Christoph Hellwig
Cc: Scott Teel, Kevin Barnett, james.bottomley@parallels.com,
Justin Lindley, brace, linux-scsi@vger.kernel.org
> -----Original Message-----
> From: Christoph Hellwig [mailto:hch@infradead.org]
> Sent: Monday, February 23, 2015 2:27 PM
> To: Don Brace
> Cc: Scott Teel; Kevin Barnett; james.bottomley@parallels.com;
> hch@infradead.org; Justin Lindley; brace; linux-scsi@vger.kernel.org
> Subject: Re: [PATCH 40/43] hpsa: cleanup initialization code.
>
> This is a backwards change. Please keep the goto unwinding (maybe with
> some better label names) instead of introducing the if allocated free pattern.
Done.
^ permalink raw reply [flat|nested] 58+ messages in thread
* [PATCH 41/43] hpsa: propagate the error code in hpsa_kdump_soft_reset
2015-02-21 22:17 [PATCH 00/43] hpsa updates Don Brace
` (39 preceding siblings ...)
2015-02-21 22:21 ` [PATCH 40/43] hpsa: cleanup initialization code Don Brace
@ 2015-02-21 22:21 ` Don Brace
2015-02-21 22:21 ` [PATCH 42/43] hpsa: cleanup reset Don Brace
2015-02-21 22:21 ` [PATCH 43/43] hpsa: change driver version Don Brace
42 siblings, 0 replies; 58+ messages in thread
From: Don Brace @ 2015-02-21 22:21 UTC (permalink / raw)
To: scott.teel, Kevin.Barnett, james.bottomley, hch, Justin.Lindley,
brace
Cc: linux-scsi
From: Robert Elliott <elliott@hp.com>
If hpsa_wait_for_board_state fails, hpsa_kdump_soft_reset
should propagate its return value (e.g., -ENODEV) rather
than just returning -1.
Reviewed-by: Scott Teel <scott.teel@pmcs.com>
Reviewed-by: Kevin Barnett <kevin.barnett@pmcs.com>
Signed-off-by: Robert Elliott <elliott@hp.com>
Signed-off-by: Don Brace <don.brace@pmcs.com>
---
drivers/scsi/hpsa.c | 11 +++++++----
1 file changed, 7 insertions(+), 4 deletions(-)
diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index 8a4c3f2..ea66c1d 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -7527,19 +7527,22 @@ static int hpsa_request_irqs(struct ctlr_info *h,
static int hpsa_kdump_soft_reset(struct ctlr_info *h)
{
+ int rc;
hpsa_send_host_reset(h, RAID_CTLR_LUNID, HPSA_RESET_TYPE_CONTROLLER);
dev_info(&h->pdev->dev, "Waiting for board to soft reset.\n");
- if (hpsa_wait_for_board_state(h->pdev, h->vaddr, BOARD_NOT_READY)) {
+ rc = hpsa_wait_for_board_state(h->pdev, h->vaddr, BOARD_NOT_READY);
+ if (rc) {
dev_warn(&h->pdev->dev, "Soft reset had no effect.\n");
- return -1;
+ return rc;
}
dev_info(&h->pdev->dev, "Board reset, awaiting READY status.\n");
- if (hpsa_wait_for_board_state(h->pdev, h->vaddr, BOARD_READY)) {
+ rc = hpsa_wait_for_board_state(h->pdev, h->vaddr, BOARD_READY);
+ if (rc) {
dev_warn(&h->pdev->dev, "Board failed to become ready "
"after soft reset.\n");
- return -1;
+ return rc;
}
return 0;
^ permalink raw reply related [flat|nested] 58+ messages in thread* [PATCH 42/43] hpsa: cleanup reset
2015-02-21 22:17 [PATCH 00/43] hpsa updates Don Brace
` (40 preceding siblings ...)
2015-02-21 22:21 ` [PATCH 41/43] hpsa: propagate the error code in hpsa_kdump_soft_reset Don Brace
@ 2015-02-21 22:21 ` Don Brace
2015-02-21 22:21 ` [PATCH 43/43] hpsa: change driver version Don Brace
42 siblings, 0 replies; 58+ messages in thread
From: Don Brace @ 2015-02-21 22:21 UTC (permalink / raw)
To: scott.teel, Kevin.Barnett, james.bottomley, hch, Justin.Lindley,
brace
Cc: linux-scsi
From: Webb Scales <webbnh@hp.com>
Synchronize completion the reset with completion of outstanding commands
Extending the newly-added synchronous abort functionality,
now also synchronize resets with the completion of outstanding commands.
Rename the wait queue to reflect the fact that it's being used for both
types of waits. Also, don't complete commands which are terminated
due to a reset operation.
fix for controller lockup during reset
Reviewed-by: Scott Teel <scott.teel@pmcs.com>
Reviewed-by: Kevin Barnett <kevin.barnett@pmcs.com>
Signed-off-by: Webb Scales <webbnh@hp.com>
Signed-off-by: Don Brace <don.brace@pmcs.com>
---
drivers/scsi/hpsa.c | 199 +++++++++++++++++++++++++++++++++++++++++------
drivers/scsi/hpsa.h | 5 +
drivers/scsi/hpsa_cmd.h | 1
3 files changed, 177 insertions(+), 28 deletions(-)
diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index ea66c1d..3531ed8 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -281,6 +281,11 @@ static inline bool hpsa_is_cmd_idle(struct CommandList *c)
return c->scsi_cmd == SCSI_CMD_IDLE;
}
+static inline bool hpsa_is_pending_event(struct CommandList *c)
+{
+ return c->abort_pending || c->reset_pending;
+}
+
/* extract sense key, asc, and ascq from sense data. -1 means invalid. */
static void decode_sense_data(const u8 *sense_data, int sense_data_len,
int *sense_key, int *asc, int *ascq)
@@ -983,7 +988,7 @@ static void __enqueue_cmd_and_start_io(struct ctlr_info *h,
static void enqueue_cmd_and_start_io(struct ctlr_info *h, struct CommandList *c)
{
- if (unlikely(c->abort_pending))
+ if (unlikely(hpsa_is_pending_event(c)))
return finish_cmd(c);
__enqueue_cmd_and_start_io(h, c, DEFAULT_REPLY_QUEUE);
@@ -1476,6 +1481,8 @@ static void hpsa_figure_phys_disk_ptrs(struct ctlr_info *h,
if (nraid_map_entries > RAID_MAP_MAX_ENTRIES)
nraid_map_entries = RAID_MAP_MAX_ENTRIES;
+ logical_drive->nphysical_disks = nraid_map_entries;
+
qdepth = 0;
for (i = 0; i < nraid_map_entries; i++) {
logical_drive->phys_disk[i] = NULL;
@@ -2046,6 +2053,8 @@ static int handle_ioaccel_mode2_error(struct ctlr_info *h,
static void hpsa_cmd_resolve_events(struct ctlr_info *h,
struct CommandList *c)
{
+ bool do_wake = false;
+
/*
* Prevent the following race in the abort handler:
*
@@ -2057,16 +2066,35 @@ static void hpsa_cmd_resolve_events(struct ctlr_info *h,
* finds struct CommandList and tries to aborts it
* Now we have aborted the wrong command.
*
- * Clear c->scsi_cmd here so that the abort handler will know this
- * command has completed. Then, check to see if the abort handler is
+ * Reset c->scsi_cmd here so that the abort or reset handler will know
+ * this command has completed. Then, check to see if the handler is
* waiting for this command, and, if so, wake it.
*/
c->scsi_cmd = SCSI_CMD_IDLE;
- mb(); /* Ensure c->scsi_cmd is set to SCSI_CMD_IDLE */
+ mb(); /* Declare command idle before checking for pending events. */
if (c->abort_pending) {
+ do_wake = true;
c->abort_pending = false;
- wake_up_all(&h->abort_sync_wait_queue);
}
+ if (c->reset_pending) {
+ unsigned long flags;
+ struct hpsa_scsi_dev_t *dev;
+
+ /*
+ * There appears to be a reset pending; lock the lock and
+ * reconfirm. If so, then decrement the count of outstanding
+ * commands and wake the reset command if this is the last one.
+ */
+ spin_lock_irqsave(&h->lock, flags);
+ dev = c->reset_pending; /* Re-fetch under the lock. */
+ if (dev && atomic_dec_and_test(&dev->reset_cmds_out))
+ do_wake = true;
+ c->reset_pending = NULL;
+ spin_unlock_irqrestore(&h->lock, flags);
+ }
+
+ if (do_wake)
+ wake_up_all(&h->event_sync_wait_queue);
}
static void hpsa_cmd_resolve_and_free(struct ctlr_info *h,
@@ -2114,10 +2142,6 @@ static void process_ioaccel2_completion(struct ctlr_info *h,
c2->error_data.status == 0))
return hpsa_cmd_free_and_done(h, c, cmd);
- /* don't requeue a command which is being aborted */
- if (unlikely(c->abort_pending))
- return hpsa_cmd_abort_and_free(h, c, cmd);
-
/*
* Any RAID offload error results in retry which will use
* the normal I/O path so the controller can handle whatever's
@@ -2212,6 +2236,13 @@ static void complete_scsi_command(struct CommandList *cp)
return hpsa_cmd_free_and_done(h, cp, cmd);
}
+ if ((unlikely(hpsa_is_pending_event(cp)))) {
+ if (cp->reset_pending)
+ return hpsa_cmd_resolve_and_free(h, cp);
+ if (cp->abort_pending)
+ return hpsa_cmd_abort_and_free(h, cp, cmd);
+ }
+
if (cp->cmd_type == CMD_IOACCEL2)
return process_ioaccel2_completion(h, cp, cmd, dev);
@@ -2239,14 +2270,10 @@ static void complete_scsi_command(struct CommandList *cp)
if (is_logical_dev_addr_mode(dev->scsi3addr)) {
if (ei->CommandStatus == CMD_IOACCEL_DISABLED)
dev->offload_enabled = 0;
- if (!cp->abort_pending)
- return hpsa_retry_cmd(h, cp);
+ return hpsa_retry_cmd(h, cp);
}
}
- if (cp->abort_pending)
- ei->CommandStatus = CMD_ABORTED;
-
/* an error has occurred */
switch (ei->CommandStatus) {
@@ -2666,6 +2693,123 @@ out:
return rc;
}
+static bool hpsa_cmd_dev_match(struct ctlr_info *h, struct CommandList *c,
+ struct hpsa_scsi_dev_t *dev,
+ unsigned char *scsi3addr)
+{
+ int i;
+ bool match = false;
+ struct io_accel2_cmd *c2 = &h->ioaccel2_cmd_pool[c->cmdindex];
+ struct hpsa_tmf_struct *ac = (struct hpsa_tmf_struct *) c2;
+
+ if (hpsa_is_cmd_idle(c))
+ return false;
+
+ switch (c->cmd_type) {
+ case CMD_SCSI:
+ case CMD_IOCTL_PEND:
+ match = !memcmp(scsi3addr, &c->Header.LUN.LunAddrBytes,
+ sizeof(c->Header.LUN.LunAddrBytes));
+ break;
+
+ case CMD_IOACCEL1:
+ case CMD_IOACCEL2:
+ if (c->phys_disk == dev) {
+ /* HBA mode match */
+ match = true;
+ } else {
+ /* Possible RAID mode -- check each phys dev. */
+ /* FIXME: Do we need to take out a lock here? If
+ * so, we could just call hpsa_get_pdisk_of_ioaccel2()
+ * instead. */
+ for (i = 0; i < dev->nphysical_disks && !match; i++) {
+ /* FIXME: an alternate test might be
+ *
+ * match = dev->phys_disk[i]->ioaccel_handle
+ * == c2->scsi_nexus; */
+ match = dev->phys_disk[i] == c->phys_disk;
+ }
+ }
+ break;
+
+ case IOACCEL2_TMF:
+ for (i = 0; i < dev->nphysical_disks && !match; i++) {
+ match = dev->phys_disk[i]->ioaccel_handle ==
+ le32_to_cpu(ac->it_nexus);
+ }
+ break;
+
+ case 0: /* The command is in the middle of being initialized. */
+ match = false;
+ break;
+
+ default:
+ dev_err(&h->pdev->dev, "unexpected cmd_type: %d\n",
+ c->cmd_type);
+ BUG();
+ }
+
+ return match;
+}
+
+static int hpsa_do_reset(struct ctlr_info *h, struct hpsa_scsi_dev_t *dev,
+ unsigned char *scsi3addr, u8 reset_type, int reply_queue)
+{
+ int i;
+ int rc = 0;
+
+ /* We can really only handle one reset at a time */
+ if (mutex_lock_interruptible(&h->reset_mutex) == -EINTR) {
+ dev_warn(&h->pdev->dev, "concurrent reset wait interrupted.\n");
+ return -EINTR;
+ }
+
+ BUG_ON(atomic_read(&dev->reset_cmds_out) != 0);
+
+ for (i = 0; i < h->nr_cmds; i++) {
+ struct CommandList *c = h->cmd_pool + i;
+ int refcount = atomic_inc_return(&c->refcount);
+
+ if (refcount > 1 && hpsa_cmd_dev_match(h, c, dev, scsi3addr)) {
+ unsigned long flags;
+
+ /*
+ * Mark the target command as having a reset pending,
+ * then lock a lock so that the command cannot complete
+ * while we're considering it. If the command is not
+ * idle then count it; otherwise revoke the event.
+ */
+ c->reset_pending = dev;
+ spin_lock_irqsave(&h->lock, flags); /* Implied MB */
+ if (!hpsa_is_cmd_idle(c))
+ atomic_inc(&dev->reset_cmds_out);
+ else
+ c->reset_pending = NULL;
+ spin_unlock_irqrestore(&h->lock, flags);
+ }
+
+ cmd_free(h, c);
+ }
+
+ rc = hpsa_send_reset(h, scsi3addr, reset_type, reply_queue);
+ if (!rc)
+ wait_event(h->event_sync_wait_queue,
+ atomic_read(&dev->reset_cmds_out) == 0 ||
+ lockup_detected(h));
+
+ if (unlikely(lockup_detected(h))) {
+ dev_warn(&h->pdev->dev,
+ "Controller lockup detected during reset wait\n");
+ rc = -ENODEV;
+ }
+
+ if (unlikely(rc))
+ atomic_set(&dev->reset_cmds_out, 0);
+
+ mutex_unlock(&h->reset_mutex);
+ return rc;
+}
+
static void hpsa_get_raid_level(struct ctlr_info *h,
unsigned char *scsi3addr, unsigned char *raid_level)
{
@@ -3515,6 +3659,7 @@ static void hpsa_get_ioaccel_drive_info(struct ctlr_info *h,
else
dev->queue_depth = DRIVE_QUEUE_DEPTH; /* conservative */
atomic_set(&dev->ioaccel_cmds_out, 0);
+ atomic_set(&dev->reset_cmds_out, 0);
}
static void hpsa_update_scsi_devices(struct ctlr_info *h, int hostno)
@@ -4654,6 +4799,8 @@ static void hpsa_command_resubmit_worker(struct work_struct *work)
cmd->result = DID_NO_CONNECT << 16;
return hpsa_cmd_free_and_done(c->h, c, cmd);
}
+ if (c->reset_pending)
+ return hpsa_cmd_resolve_and_free(c->h, c);
if (c->abort_pending)
return hpsa_cmd_abort_and_free(c->h, c, cmd);
if (c->cmd_type == CMD_IOACCEL2) {
@@ -5024,8 +5171,7 @@ static int hpsa_eh_device_reset_handler(struct scsi_cmnd *scsicmd)
dev = scsicmd->device->hostdata;
if (!dev) {
- dev_err(&h->pdev->dev, "hpsa_eh_device_reset_handler: "
- "device lookup failed.\n");
+ dev_err(&h->pdev->dev, "%s: device lookup failed\n", __func__);
return FAILED;
}
@@ -5060,15 +5206,13 @@ static int hpsa_eh_device_reset_handler(struct scsi_cmnd *scsicmd)
dev->expose_state);
/* send a reset to the SCSI LUN which the command was sent to */
- rc = hpsa_send_reset(h, dev->scsi3addr, HPSA_RESET_TYPE_LUN,
- DEFAULT_REPLY_QUEUE);
- if (rc == 0)
- return SUCCESS;
-
+ rc = hpsa_do_reset(h, dev, dev->scsi3addr, HPSA_RESET_TYPE_LUN,
+ DEFAULT_REPLY_QUEUE);
dev_warn(&h->pdev->dev,
- "resetting scsi %d:%d:%d:%d failed\n",
- h->scsi_host->host_no, dev->bus, dev->target, dev->lun);
- return FAILED;
+ "resetting scsi %d:%d:%d:%d %s\n",
+ h->scsi_host->host_no, dev->bus, dev->target, dev->lun,
+ rc == 0 ? "completed successfully" : "failed");
+ return rc == 0 ? SUCCESS : FAILED;
}
static void swizzle_abort_tag(u8 *tag)
@@ -5247,7 +5391,7 @@ static int hpsa_send_reset_as_abort_ioaccel2(struct ctlr_info *h,
"Reset as abort: Resetting physical device at scsi3addr 0x%02x%02x%02x%02x%02x%02x%02x%02x\n",
psa[0], psa[1], psa[2], psa[3],
psa[4], psa[5], psa[6], psa[7]);
- rc = hpsa_send_reset(h, psa, HPSA_RESET_TYPE_TARGET, reply_queue);
+ rc = hpsa_do_reset(h, dev, psa, HPSA_RESET_TYPE_TARGET, reply_queue);
if (rc != 0) {
dev_warn(&h->pdev->dev,
"Reset as abort: Failed on physical device at scsi3addr 0x%02x%02x%02x%02x%02x%02x%02x%02x\n",
@@ -5486,7 +5630,7 @@ static int hpsa_eh_abort_handler(struct scsi_cmnd *sc)
return FAILED;
}
dev_info(&h->pdev->dev, "%s SENT, SUCCESS\n", msg);
- wait_event(h->abort_sync_wait_queue,
+ wait_event(h->event_sync_wait_queue,
abort->scsi_cmd != sc || lockup_detected(h));
cmd_free(h, abort);
return !lockup_detected(h) ? SUCCESS : FAILED;
@@ -7935,7 +8079,8 @@ reinit_after_soft_reset:
return hpsa_init_cleanup(h, rc);
init_waitqueue_head(&h->scan_wait_queue);
init_waitqueue_head(&h->abort_cmd_wait_queue);
- init_waitqueue_head(&h->abort_sync_wait_queue);
+ init_waitqueue_head(&h->event_sync_wait_queue);
+ mutex_init(&h->reset_mutex);
h->scan_finished = 1; /* no scan currently in progress */
pci_set_drvdata(pdev, h);
diff --git a/drivers/scsi/hpsa.h b/drivers/scsi/hpsa.h
index b1ae888..a9e33b3 100644
--- a/drivers/scsi/hpsa.h
+++ b/drivers/scsi/hpsa.h
@@ -47,6 +47,7 @@ struct hpsa_scsi_dev_t {
unsigned char raid_level; /* from inquiry page 0xC1 */
unsigned char volume_offline; /* discovered via TUR or VPD */
u16 queue_depth; /* max queue_depth for this device */
+ atomic_t reset_cmds_out; /* Count of commands to-be affected */
atomic_t ioaccel_cmds_out; /* Only used for physical devices
* counts commands sent to physical
* device via "ioaccel" path.
@@ -70,6 +71,7 @@ struct hpsa_scsi_dev_t {
* devices in order to honor physical device queue depth limits.
*/
struct hpsa_scsi_dev_t *phys_disk[RAID_MAP_MAX_ENTRIES];
+ int nphysical_disks;
int supports_aborts;
#define HPSA_DO_NOT_EXPOSE 0x0
#define HPSA_SG_ATTACH 0x1
@@ -267,7 +269,8 @@ struct ctlr_info {
struct workqueue_struct *rescan_ctlr_wq;
atomic_t abort_cmds_available;
wait_queue_head_t abort_cmd_wait_queue;
- wait_queue_head_t abort_sync_wait_queue;
+ wait_queue_head_t event_sync_wait_queue;
+ struct mutex reset_mutex;
};
struct offline_device_entry {
diff --git a/drivers/scsi/hpsa_cmd.h b/drivers/scsi/hpsa_cmd.h
index f986402..c601622 100644
--- a/drivers/scsi/hpsa_cmd.h
+++ b/drivers/scsi/hpsa_cmd.h
@@ -441,6 +441,7 @@ struct CommandList {
struct hpsa_scsi_dev_t *phys_disk;
int abort_pending;
+ struct hpsa_scsi_dev_t *reset_pending;
atomic_t refcount; /* Must be last to avoid memset in hpsa_cmd_init() */
} __aligned(COMMANDLIST_ALIGNMENT);
^ permalink raw reply related [flat|nested] 58+ messages in thread* [PATCH 43/43] hpsa: change driver version
2015-02-21 22:17 [PATCH 00/43] hpsa updates Don Brace
` (41 preceding siblings ...)
2015-02-21 22:21 ` [PATCH 42/43] hpsa: cleanup reset Don Brace
@ 2015-02-21 22:21 ` Don Brace
42 siblings, 0 replies; 58+ messages in thread
From: Don Brace @ 2015-02-21 22:21 UTC (permalink / raw)
To: scott.teel, Kevin.Barnett, james.bottomley, hch, Justin.Lindley,
brace
Cc: linux-scsi
update driver version
Reviewed-by: Scott Teel <scott.teel@pmcs.com>
Reviewed-by: Kevin Barnett <kevin.barnett@pmcs.com>
Signed-off-by: Don Brace <don.brace@pmcs.com>
---
drivers/scsi/hpsa.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index 3531ed8..0b78963 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -56,7 +56,7 @@
#include "hpsa.h"
/* HPSA_DRIVER_VERSION must be 3 byte values (0-255) separated by '.' */
-#define HPSA_DRIVER_VERSION "3.4.4-1"
+#define HPSA_DRIVER_VERSION "3.4.8-0"
#define DRIVER_NAME "HP HPSA Driver (v " HPSA_DRIVER_VERSION ")"
#define HPSA "hpsa"
^ permalink raw reply related [flat|nested] 58+ messages in thread