From mboxrd@z Thu Jan 1 00:00:00 1970 From: Don Brace Subject: [PATCH v2 35/41] hpsa: create workqueue after the driver is ready for use Date: Fri, 06 Mar 2015 17:48:52 -0600 Message-ID: <20150306234852.29973.13058.stgit@brunhilda> References: <20150306233504.29973.41322.stgit@brunhilda> Mime-Version: 1.0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 7bit Return-path: Received: from g2t2354.austin.hp.com ([15.217.128.53]:37773 "EHLO g2t2354.austin.hp.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S932286AbbCFXuV (ORCPT ); Fri, 6 Mar 2015 18:50:21 -0500 In-Reply-To: <20150306233504.29973.41322.stgit@brunhilda> Sender: linux-scsi-owner@vger.kernel.org List-Id: linux-scsi@vger.kernel.org To: scott.teel@pmcs.com, Kevin.Barnett@pmcs.com, james.bottomley@parallels.com, hch@infradead.org, Justin.Lindley@pmcs.com, brace@pmcs.com Cc: linux-scsi@vger.kernel.org From: Robert Elliott Don't create the resubmit workqueue in hpsa_init_one until everything else is ready to use, so everything can be freed in reverse order of when they were allocated without risking freeing things while workqueue items are still active. Destroy the workqueue in the right order in hpsa_undo_allocations_after_kdump_soft_reset too. Reviewed-by: Scott Teel Reviewed-by: Kevin Barnett Signed-off-by: Robert Elliott Signed-off-by: Don Brace --- drivers/scsi/hpsa.c | 60 ++++++++++++++++++++++++++------------------------- 1 file changed, 31 insertions(+), 29 deletions(-) diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c index b514d0c..2fb03c9 100644 --- a/drivers/scsi/hpsa.c +++ b/drivers/scsi/hpsa.c @@ -7719,30 +7719,18 @@ reinit_after_soft_reset: atomic_set(&h->passthru_cmds_avail, HPSA_MAX_CONCURRENT_PASSTHRUS); atomic_set(&h->abort_cmds_available, HPSA_CMDS_RESERVED_FOR_ABORTS); - h->rescan_ctlr_wq = hpsa_create_controller_wq(h, "rescan"); - if (!h->rescan_ctlr_wq) { - rc = -ENOMEM; - goto clean1; - } - - h->resubmit_wq = hpsa_create_controller_wq(h, "resubmit"); - if (!h->resubmit_wq) { - rc = -ENOMEM; - goto clean1; /* aer/h */ - } - /* Allocate and clear per-cpu variable lockup_detected */ h->lockup_detected = alloc_percpu(u32); if (!h->lockup_detected) { dev_err(&h->pdev->dev, "Failed to allocate lockup detector\n"); rc = -ENOMEM; - goto clean1; /* wq/aer/h */ + goto clean1; /* aer/h */ } set_lockup_detected_for_all_cpus(h, 0); rc = hpsa_pci_init(h); if (rc) - goto clean2; /* lockup, wq/aer/h */ + goto clean2; /* lockup, aer/h */ sprintf(h->devname, HPSA "%d", number_of_controllers); h->ctlr = number_of_controllers; @@ -7758,7 +7746,7 @@ reinit_after_soft_reset: dac = 0; } else { dev_err(&pdev->dev, "no suitable DMA available\n"); - goto clean3; /* pci, lockup, wq/aer/h */ + goto clean3; /* pci, lockup, aer/h */ } } @@ -7767,16 +7755,16 @@ reinit_after_soft_reset: rc = hpsa_request_irqs(h, do_hpsa_intr_msi, do_hpsa_intr_intx); if (rc) - goto clean3; /* pci, lockup, wq/aer/h */ + goto clean3; /* pci, lockup, aer/h */ dev_info(&pdev->dev, "%s: <0x%x> at IRQ %d%s using DAC\n", h->devname, pdev->device, h->intr[h->intr_mode], dac ? "" : " not"); rc = hpsa_alloc_cmd_pool(h); if (rc) - goto clean4; /* irq, pci, lockup, wq/aer/h */ + goto clean4; /* irq, pci, lockup, aer/h */ rc = hpsa_alloc_sg_chain_blocks(h); if (rc) - goto clean5; /* cmd, irq, pci, lockup, wq/aer/h */ + goto clean5; /* cmd, irq, pci, lockup, aer/h */ init_waitqueue_head(&h->scan_wait_queue); init_waitqueue_head(&h->abort_cmd_wait_queue); init_waitqueue_head(&h->abort_sync_wait_queue); @@ -7789,7 +7777,20 @@ reinit_after_soft_reset: spin_lock_init(&h->devlock); rc = hpsa_put_ctlr_into_performant_mode(h); if (rc) - goto clean6; /* sg, cmd, irq, pci, lockup, wq/aer/h */ + goto clean6; /* sg, cmd, irq, pci, lockup, aer/h */ + + /* create the resubmit workqueue */ + h->rescan_ctlr_wq = hpsa_create_controller_wq(h, "rescan"); + if (!h->rescan_ctlr_wq) { + rc = -ENOMEM; + goto clean7; + } + + h->resubmit_wq = hpsa_create_controller_wq(h, "resubmit"); + if (!h->resubmit_wq) { + rc = -ENOMEM; + goto clean7; /* aer/h */ + } /* * At this point, the controller is ready to take commands. @@ -7831,7 +7832,7 @@ reinit_after_soft_reset: rc = hpsa_kdump_soft_reset(h); if (rc) /* Neither hard nor soft reset worked, we're hosed. */ - goto clean7; + goto clean8; dev_info(&h->pdev->dev, "Board READY.\n"); dev_info(&h->pdev->dev, @@ -7868,7 +7869,7 @@ reinit_after_soft_reset: hpsa_hba_inquiry(h); rc = hpsa_register_scsi(h); /* hook ourselves into SCSI subsystem */ if (rc) - goto clean7; + goto clean8; /* wq, perf, sg, cmd, irq, pci, lockup, aer/h */ /* Monitor the controller for firmware lockups */ h->heartbeat_sample_interval = HEARTBEAT_SAMPLE_INTERVAL; @@ -7880,19 +7881,20 @@ reinit_after_soft_reset: h->heartbeat_sample_interval); return 0; -clean7: /* perf, sg, cmd, irq, pci, lockup, wq/aer/h */ +clean8: /* perf, sg, cmd, irq, pci, lockup, aer/h */ kfree(h->hba_inquiry_data); +clean7: /* perf, sg, cmd, irq, pci, lockup, aer/h */ hpsa_free_performant_mode(h); h->access.set_intr_mask(h, HPSA_INTR_OFF); clean6: /* sg, cmd, irq, pci, lockup, wq/aer/h */ hpsa_free_sg_chain_blocks(h); -clean5: /* cmd, irq, pci, lockup, wq/aer/h */ +clean5: /* cmd, irq, pci, lockup, aer/h */ hpsa_free_cmd_pool(h); -clean4: /* irq, pci, lockup, wq/aer/h */ +clean4: /* irq, pci, lockup, aer/h */ hpsa_free_irqs(h); -clean3: /* pci, lockup, wq/aer/h */ +clean3: /* pci, lockup, aer/h */ hpsa_free_pci_init(h); -clean2: /* lockup, wq/aer/h */ +clean2: /* lockup, aer/h */ if (h->lockup_detected) { free_percpu(h->lockup_detected); h->lockup_detected = NULL; @@ -7991,9 +7993,9 @@ static void hpsa_remove_one(struct pci_dev *pdev) hpsa_free_device_info(h); /* scan */ - hpsa_unregister_scsi(h); /* init_one "8" */ - kfree(h->hba_inquiry_data); /* init_one "8" */ - h->hba_inquiry_data = NULL; /* init_one "8" */ + hpsa_unregister_scsi(h); /* init_one 9 */ + kfree(h->hba_inquiry_data); /* init_one 9 */ + h->hba_inquiry_data = NULL; /* init_one 9 */ hpsa_free_performant_mode(h); /* init_one 7 */ hpsa_free_sg_chain_blocks(h); /* init_one 6 */ hpsa_free_cmd_pool(h); /* init_one 5 */