From: Finn Thain <fthain@telegraphics.com.au>
To: "James E.J. Bottomley" <JBottomley@odin.com>,
Michael Schmitz <schmitzmic@gmail.com>,
linux-m68k@vger.kernel.org, linux-scsi@vger.kernel.org,
linux-kernel@vger.kernel.org,
"Martin K. Petersen" <martin.petersen@oracle.com>,
Russell King <linux@arm.linux.org.uk>,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 45/77] ncr5380: Cleanup #include directives
Date: Tue, 22 Dec 2015 12:18:23 +1100 [thread overview]
Message-ID: <20151222011750.245516745@telegraphics.com.au> (raw)
In-Reply-To: 20151222011737.980475848@telegraphics.com.au
[-- Attachment #1: ncr5380-move-core-driver-includes --]
[-- Type: text/plain, Size: 7522 bytes --]
Remove unused includes (stat.h, signal.h, proc_fs.h) and move includes
needed by the core drivers into the common header (delay.h etc).
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
---
drivers/scsi/NCR5380.c | 2 --
drivers/scsi/NCR5380.h | 4 ++++
drivers/scsi/arm/cumana_1.c | 4 ----
drivers/scsi/arm/oak.c | 2 --
drivers/scsi/atari_NCR5380.c | 5 -----
drivers/scsi/atari_scsi.c | 1 -
drivers/scsi/dmx3191d.c | 5 -----
drivers/scsi/dtc.c | 4 +---
drivers/scsi/g_NCR5380.c | 6 ++----
drivers/scsi/mac_scsi.c | 1 -
drivers/scsi/pas16.c | 4 ----
drivers/scsi/t128.c | 3 ---
12 files changed, 7 insertions(+), 34 deletions(-)
Index: linux/drivers/scsi/NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/NCR5380.c 2015-12-22 12:16:36.000000000 +1100
+++ linux/drivers/scsi/NCR5380.c 2015-12-22 12:16:37.000000000 +1100
@@ -79,8 +79,6 @@
* 4. Test SCSI-II tagged queueing (I have no devices which support
* tagged queueing)
*/
-#include <scsi/scsi_dbg.h>
-#include <scsi/scsi_transport_spi.h>
#if (NDEBUG & NDEBUG_LISTS)
#define LIST(x,y) {printk("LINE:%d Adding %p to %p\n", __LINE__, (void*)(x), (void*)(y)); if ((x)==(y)) udelay(5); }
Index: linux/drivers/scsi/NCR5380.h
===================================================================
--- linux.orig/drivers/scsi/NCR5380.h 2015-12-22 12:16:32.000000000 +1100
+++ linux/drivers/scsi/NCR5380.h 2015-12-22 12:16:37.000000000 +1100
@@ -22,8 +22,12 @@
#ifndef NCR5380_H
#define NCR5380_H
+#include <linux/delay.h>
#include <linux/interrupt.h>
+#include <linux/workqueue.h>
+#include <scsi/scsi_dbg.h>
#include <scsi/scsi_eh.h>
+#include <scsi/scsi_transport_spi.h>
#define NDEBUG_ARBITRATION 0x1
#define NDEBUG_AUTOSENSE 0x2
Index: linux/drivers/scsi/arm/cumana_1.c
===================================================================
--- linux.orig/drivers/scsi/arm/cumana_1.c 2015-12-22 12:16:07.000000000 +1100
+++ linux/drivers/scsi/arm/cumana_1.c 2015-12-22 12:16:37.000000000 +1100
@@ -4,9 +4,7 @@
* Copyright 1995-2002, Russell King
*/
#include <linux/module.h>
-#include <linux/signal.h>
#include <linux/ioport.h>
-#include <linux/delay.h>
#include <linux/blkdev.h>
#include <linux/init.h>
@@ -15,8 +13,6 @@
#include <scsi/scsi_host.h>
-#include <scsi/scsicam.h>
-
#define PSEUDO_DMA
#define priv(host) ((struct NCR5380_hostdata *)(host)->hostdata)
Index: linux/drivers/scsi/arm/oak.c
===================================================================
--- linux.orig/drivers/scsi/arm/oak.c 2015-12-22 12:16:07.000000000 +1100
+++ linux/drivers/scsi/arm/oak.c 2015-12-22 12:16:37.000000000 +1100
@@ -5,9 +5,7 @@
*/
#include <linux/module.h>
-#include <linux/signal.h>
#include <linux/ioport.h>
-#include <linux/delay.h>
#include <linux/blkdev.h>
#include <linux/init.h>
Index: linux/drivers/scsi/atari_NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/atari_NCR5380.c 2015-12-22 12:16:36.000000000 +1100
+++ linux/drivers/scsi/atari_NCR5380.c 2015-12-22 12:16:37.000000000 +1100
@@ -68,9 +68,6 @@
/* Adapted for the sun3 by Sam Creasey. */
-#include <scsi/scsi_dbg.h>
-#include <scsi/scsi_transport_spi.h>
-
#if (NDEBUG & NDEBUG_LISTS)
#define LIST(x, y) \
do { \
@@ -517,8 +514,6 @@ static inline int NCR5380_poll_politely(
reg, bit, val, wait);
}
-#include <linux/delay.h>
-
#if NDEBUG
static struct {
unsigned char mask;
Index: linux/drivers/scsi/atari_scsi.c
===================================================================
--- linux.orig/drivers/scsi/atari_scsi.c 2015-12-22 12:15:56.000000000 +1100
+++ linux/drivers/scsi/atari_scsi.c 2015-12-22 12:16:37.000000000 +1100
@@ -66,7 +66,6 @@
#include <linux/module.h>
#include <linux/types.h>
-#include <linux/delay.h>
#include <linux/blkdev.h>
#include <linux/interrupt.h>
#include <linux/init.h>
Index: linux/drivers/scsi/dmx3191d.c
===================================================================
--- linux.orig/drivers/scsi/dmx3191d.c 2015-12-22 12:15:56.000000000 +1100
+++ linux/drivers/scsi/dmx3191d.c 2015-12-22 12:16:37.000000000 +1100
@@ -41,11 +41,6 @@
#define NCR5380_implementation_fields /* none */
-/*
- * Includes needed for NCR5380.[ch] (XXX: Move them to NCR5380.h)
- */
-#include <linux/delay.h>
-
#include "NCR5380.h"
#include "NCR5380.c"
Index: linux/drivers/scsi/dtc.c
===================================================================
--- linux.orig/drivers/scsi/dtc.c 2015-12-22 12:16:32.000000000 +1100
+++ linux/drivers/scsi/dtc.c 2015-12-22 12:16:37.000000000 +1100
@@ -46,15 +46,13 @@
#include <linux/module.h>
-#include <linux/signal.h>
#include <linux/blkdev.h>
-#include <linux/delay.h>
-#include <linux/stat.h>
#include <linux/string.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <scsi/scsi_host.h>
+
#include "dtc.h"
#define AUTOPROBE_IRQ
#include "NCR5380.h"
Index: linux/drivers/scsi/g_NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/g_NCR5380.c 2015-12-22 12:16:32.000000000 +1100
+++ linux/drivers/scsi/g_NCR5380.c 2015-12-22 12:16:37.000000000 +1100
@@ -63,16 +63,14 @@
#endif
#include <asm/io.h>
-#include <linux/signal.h>
#include <linux/blkdev.h>
+#include <linux/module.h>
#include <scsi/scsi_host.h>
#include "g_NCR5380.h"
#include "NCR5380.h"
-#include <linux/stat.h>
#include <linux/init.h>
#include <linux/ioport.h>
#include <linux/isapnp.h>
-#include <linux/delay.h>
#include <linux/interrupt.h>
static int ncr_irq;
@@ -732,7 +730,7 @@ static struct scsi_host_template driver_
.cmd_per_lun = CMD_PER_LUN,
.use_clustering = DISABLE_CLUSTERING,
};
-#include <linux/module.h>
+
#include "scsi_module.c"
module_param(ncr_irq, int, 0);
Index: linux/drivers/scsi/mac_scsi.c
===================================================================
--- linux.orig/drivers/scsi/mac_scsi.c 2015-12-22 12:16:07.000000000 +1100
+++ linux/drivers/scsi/mac_scsi.c 2015-12-22 12:16:37.000000000 +1100
@@ -12,7 +12,6 @@
*/
#include <linux/types.h>
-#include <linux/delay.h>
#include <linux/module.h>
#include <linux/ioport.h>
#include <linux/init.h>
Index: linux/drivers/scsi/pas16.c
===================================================================
--- linux.orig/drivers/scsi/pas16.c 2015-12-22 12:16:27.000000000 +1100
+++ linux/drivers/scsi/pas16.c 2015-12-22 12:16:37.000000000 +1100
@@ -69,14 +69,10 @@
#include <linux/module.h>
-#include <linux/signal.h>
-#include <linux/proc_fs.h>
#include <asm/io.h>
#include <asm/dma.h>
#include <linux/blkdev.h>
-#include <linux/delay.h>
#include <linux/interrupt.h>
-#include <linux/stat.h>
#include <linux/init.h>
#include <scsi/scsi_host.h>
Index: linux/drivers/scsi/t128.c
===================================================================
--- linux.orig/drivers/scsi/t128.c 2015-12-22 12:15:56.000000000 +1100
+++ linux/drivers/scsi/t128.c 2015-12-22 12:16:37.000000000 +1100
@@ -68,14 +68,11 @@
* 15 9-11
*/
-#include <linux/signal.h>
#include <linux/io.h>
#include <linux/blkdev.h>
#include <linux/interrupt.h>
-#include <linux/stat.h>
#include <linux/init.h>
#include <linux/module.h>
-#include <linux/delay.h>
#include <scsi/scsi_host.h>
#include "t128.h"
next prev parent reply other threads:[~2015-12-22 2:31 UTC|newest]
Thread overview: 156+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-12-22 1:17 [PATCH v3 00/77] More fixes, cleanup and modernization for NCR5380 drivers Finn Thain
2015-12-22 1:17 ` [PATCH v3 01/77] atari_scsi: Fix SCSI host ID setting Finn Thain
2015-12-22 1:17 ` [PATCH v3 02/77] ncr5380: Remove redundant static variable initializers Finn Thain
2015-12-22 1:17 ` [PATCH v3 03/77] ncr5380: Eliminate PDEBUG*, TDEBUG* and DTCDEBUG* macros Finn Thain
2015-12-22 1:17 ` [PATCH v3 04/77] ncr5380: Remove more pointless macros Finn Thain
2015-12-22 1:17 ` [PATCH v3 05/77] ncr5380: Remove NCR5380_local_declare and NCR5380_setup macros Finn Thain
2015-12-22 1:17 ` [PATCH v3 06/77] ncr5380: Remove NCR5380_instance_name macro Finn Thain
2015-12-22 1:17 ` [PATCH v3 07/77] ncr5380: Split NCR5380_init() into two functions Finn Thain
2015-12-22 1:17 ` [PATCH v3 08/77] ncr5380: Move NCR53C400-specific code Finn Thain
2015-12-22 1:17 ` [PATCH v3 09/77] atari_NCR5380: Reset bus on driver initialization if required Finn Thain
2015-12-22 1:17 ` [PATCH v3 10/77] atari_NCR5380: Remove RESET_BOOT, CONFIG_ATARI_SCSI_TOSHIBA_DELAY and CONFIG_ATARI_SCSI_RESET_BOOT Finn Thain
2015-12-22 1:17 ` [PATCH v3 11/77] ncr5380: Simplify bus reset handlers Finn Thain
2015-12-22 1:17 ` [PATCH v3 12/77] ncr5380: Remove unused hostdata->aborted flag Finn Thain
2015-12-22 1:17 ` [PATCH v3 13/77] ncr5380: Remove redundant register writes Finn Thain
2015-12-22 1:17 ` [PATCH v3 14/77] ncr5380: Use return instead of goto in NCR5380_select() Finn Thain
2015-12-22 1:17 ` [PATCH v3 15/77] ncr5380: Always escalate bad target time-out " Finn Thain
2015-12-22 1:17 ` [PATCH v3 16/77] ncr5380: Proceed with next command after NCR5380_select() calls scsi_done Finn Thain
2015-12-22 1:17 ` [PATCH v3 17/77] ncr5380: Keep BSY asserted when entering SELECTION phase Finn Thain
2015-12-22 7:01 ` Hannes Reinecke
2015-12-22 1:17 ` [PATCH v3 18/77] ncr5380: Eliminate USLEEP_WAITLONG delay Finn Thain
2015-12-22 7:05 ` Hannes Reinecke
2015-12-22 12:38 ` Finn Thain
2015-12-22 13:37 ` Hannes Reinecke
2015-12-22 1:17 ` [PATCH v3 19/77] ncr5380: Cleanup bogus {request, release}_region() calls Finn Thain
2015-12-22 7:05 ` [PATCH v3 19/77] ncr5380: Cleanup bogus {request,release}_region() calls Hannes Reinecke
2015-12-22 1:17 ` [PATCH v3 20/77] ncr5380: Introduce unbound workqueue Finn Thain
2015-12-22 7:10 ` Hannes Reinecke
2015-12-22 12:44 ` Finn Thain
2015-12-22 14:48 ` Hannes Reinecke
2015-12-22 1:17 ` [PATCH v3 21/77] ncr5380: Sleep when polling, if possible Finn Thain
2015-12-22 7:12 ` Hannes Reinecke
2015-12-22 1:18 ` [PATCH v3 22/77] ncr5380: Eliminate selecting state Finn Thain
2015-12-22 7:14 ` Hannes Reinecke
2015-12-22 1:18 ` [PATCH v3 23/77] ncr5380: Always retry arbitration and selection Finn Thain
2015-12-22 7:14 ` Hannes Reinecke
2015-12-22 1:18 ` [PATCH v3 24/77] ncr5380: Implement NCR5380_dma_xfer_len and remove LIMIT_TRANSFERSIZE macro Finn Thain
2015-12-22 7:17 ` Hannes Reinecke
2015-12-22 1:18 ` [PATCH v3 25/77] ncr5380: Rework disconnect versus poll logic Finn Thain
2015-12-22 7:21 ` Hannes Reinecke
2015-12-22 1:18 ` [PATCH v3 26/77] ncr5380: Fix NCR5380_transfer_pio() result Finn Thain
2015-12-22 7:22 ` Hannes Reinecke
2015-12-22 1:18 ` [PATCH v3 27/77] ncr5380: Add missing lock in eh_abort_handler Finn Thain
2015-12-22 7:23 ` Hannes Reinecke
2015-12-22 1:18 ` [PATCH v3 28/77] ncr5380: Drop DEF_SCSI_QCMD macro Finn Thain
2015-12-22 7:24 ` Hannes Reinecke
2015-12-22 1:18 ` [PATCH v3 29/77] ncr5380: Remove references to linked commands Finn Thain
2015-12-22 7:25 ` Hannes Reinecke
2015-12-22 1:18 ` [PATCH v3 30/77] ncr5380: Add missing break after case MESSAGE_REJECT Finn Thain
2015-12-22 7:26 ` Hannes Reinecke
2015-12-22 1:18 ` [PATCH v3 31/77] ncr5380: Fix !REQ timeout in do_abort() Finn Thain
2015-12-22 7:26 ` Hannes Reinecke
2015-12-22 1:18 ` [PATCH v3 32/77] ncr5380: Fix bus phase " Finn Thain
2015-12-22 7:27 ` Hannes Reinecke
2015-12-22 1:18 ` [PATCH v3 33/77] atari_NCR5380: Set do_abort() timeouts Finn Thain
2015-12-22 7:29 ` Hannes Reinecke
2015-12-22 1:18 ` [PATCH v3 34/77] atari_NCR5380: Use arbitration timeout Finn Thain
2015-12-22 7:30 ` Hannes Reinecke
2015-12-22 1:18 ` [PATCH v3 35/77] ncr5380: Dont wait for BUS FREE after disconnect Finn Thain
2015-12-22 7:31 ` Hannes Reinecke
2015-12-22 1:18 ` [PATCH v3 36/77] ncr5380: Use work_struct instead of delayed_work Finn Thain
2015-12-22 7:32 ` Hannes Reinecke
2015-12-22 1:18 ` [PATCH v3 37/77] ncr5380: Standardize work queueing algorithm Finn Thain
2015-12-22 7:33 ` Hannes Reinecke
2015-12-22 1:18 ` [PATCH v3 38/77] ncr5380: Remove UNSAFE macro Finn Thain
2015-12-22 7:34 ` Hannes Reinecke
2015-12-22 1:18 ` [PATCH v3 39/77] ncr5380: Standardize interrupt handling Finn Thain
2015-12-22 7:36 ` Hannes Reinecke
2015-12-22 1:18 ` [PATCH v3 40/77] ncr5380: Introduce NCR5380_poll_politely2 Finn Thain
2015-12-22 7:37 ` Hannes Reinecke
2015-12-22 1:18 ` [PATCH v3 41/77] ncr5380: Replace redundant flags with FLAG_NO_DMA_FIXUP Finn Thain
2015-12-22 7:39 ` Hannes Reinecke
2015-12-22 1:18 ` [PATCH v3 42/77] ncr5380: Replace READ_OVERRUNS macro with FLAG_NO_DMA_FIXUPS Finn Thain
2015-12-22 7:39 ` Hannes Reinecke
2015-12-22 1:18 ` [PATCH v3 43/77] ncr5380: Standardize reselection handling Finn Thain
2015-12-22 7:41 ` Hannes Reinecke
2015-12-22 1:18 ` [PATCH v3 44/77] ncr5380: Fix off-by-one bug in extended_msg[] bounds check Finn Thain
2015-12-22 7:41 ` Hannes Reinecke
2015-12-22 1:18 ` Finn Thain [this message]
2015-12-22 7:42 ` [PATCH v3 45/77] ncr5380: Cleanup #include directives Hannes Reinecke
2015-12-22 1:18 ` [PATCH v3 46/77] ncr5380: Fix NDEBUG_NO_DATAOUT flag Finn Thain
2015-12-22 7:42 ` Hannes Reinecke
2015-12-22 1:18 ` [PATCH v3 47/77] ncr5380: Fix and cleanup scsi_host_template initializers Finn Thain
2015-12-22 7:43 ` Hannes Reinecke
2015-12-22 1:18 ` [PATCH v3 48/77] atari_NCR5380: Fix queue_size limit Finn Thain
2015-12-22 7:44 ` Hannes Reinecke
2015-12-22 1:18 ` [PATCH v3 49/77] ncr5380: Remove redundant ICR_ARBITRATION_LOST test and eliminate FLAG_DTC3181E Finn Thain
2015-12-22 7:45 ` Hannes Reinecke
2015-12-22 1:18 ` [PATCH v3 50/77] ncr5380: Change instance->host_lock to hostdata->lock Finn Thain
2015-12-22 7:46 ` Hannes Reinecke
2015-12-22 1:18 ` [PATCH v3 51/77] ncr5380: Remove command list debug code Finn Thain
2015-12-22 7:47 ` Hannes Reinecke
2015-12-22 1:18 ` [PATCH v3 52/77] ncr5380: Remove H_NO macro and introduce dsprintk Finn Thain
2015-12-22 7:48 ` Hannes Reinecke
2015-12-22 1:18 ` [PATCH v3 53/77] ncr5380: Use shost_priv helper Finn Thain
2015-12-22 7:48 ` Hannes Reinecke
2015-12-22 1:18 ` [PATCH v3 54/77] ncr5380: Use dsprintk() for queue debugging Finn Thain
2015-12-22 7:50 ` Hannes Reinecke
2015-12-22 1:18 ` [PATCH v3 55/77] ncr5380: Remove LIST and REMOVE macros Finn Thain
2015-12-22 7:50 ` Hannes Reinecke
2015-12-22 1:18 ` [PATCH v3 56/77] ncr5380: Remove redundant volatile qualifiers Finn Thain
2015-12-22 7:51 ` Hannes Reinecke
2015-12-22 1:18 ` [PATCH v3 57/77] ncr5380: Use standard list data structure Finn Thain
2015-12-22 7:55 ` Hannes Reinecke
2015-12-22 1:18 ` [PATCH v3 58/77] ncr5380: Refactor command completion Finn Thain
2015-12-22 7:56 ` Hannes Reinecke
2015-12-22 1:18 ` [PATCH v3 59/77] ncr5380: Fix autosense bugs Finn Thain
2015-12-22 7:57 ` Hannes Reinecke
2015-12-22 1:18 ` [PATCH v3 60/77] ncr5380: Implement new eh_abort_handler Finn Thain
2015-12-22 7:59 ` Hannes Reinecke
2015-12-22 1:18 ` [PATCH v3 61/77] ncr5380: Fix EH during arbitration and selection Finn Thain
2015-12-22 8:00 ` Hannes Reinecke
2015-12-22 1:18 ` [PATCH v3 62/77] ncr5380: Implement new eh_bus_reset_handler Finn Thain
2015-12-22 8:01 ` Hannes Reinecke
2015-12-22 1:18 ` [PATCH v3 63/77] atari_NCR5380: Remove HOSTNO macro from printk() and seq_printf() calls Finn Thain
2015-12-22 8:02 ` Hannes Reinecke
2015-12-22 1:18 ` [PATCH v3 64/77] atari_NCR5380: Eliminate HOSTNO macro Finn Thain
2015-12-22 8:02 ` Hannes Reinecke
2015-12-22 1:18 ` [PATCH v3 65/77] atari_scsi, sun3_scsi: Remove global Scsi_Host pointer Finn Thain
2015-12-22 8:03 ` Hannes Reinecke
2015-12-22 1:18 ` [PATCH v3 66/77] ncr5380: Fix soft lockups Finn Thain
2015-12-22 8:03 ` Hannes Reinecke
2015-12-22 11:39 ` One Thousand Gnomes
2015-12-22 13:47 ` Finn Thain
2015-12-23 0:42 ` Michael Schmitz
2015-12-22 1:18 ` [PATCH v3 67/77] ncr5380: Cleanup comments Finn Thain
2015-12-22 8:04 ` Hannes Reinecke
2015-12-22 1:18 ` [PATCH v3 68/77] ncr5380: Fix whitespace issues using regexp Finn Thain
2015-12-22 8:04 ` Hannes Reinecke
2015-12-22 14:46 ` Joe Perches
2015-12-23 0:56 ` Finn Thain
2015-12-23 1:13 ` Joe Perches
2015-12-23 2:03 ` Finn Thain
2015-12-23 2:18 ` Joe Perches
2015-12-23 4:14 ` Finn Thain
2015-12-23 1:22 ` James Bottomley
2015-12-23 2:31 ` Finn Thain
2015-12-22 1:18 ` [PATCH v3 69/77] ncr5380: Merge changes from atari_NCR5380.c Finn Thain
2015-12-22 8:05 ` Hannes Reinecke
2015-12-22 1:18 ` [PATCH v3 70/77] atari_NCR5380: Merge changes from NCR5380.c Finn Thain
2015-12-22 8:05 ` Hannes Reinecke
2015-12-22 1:18 ` [PATCH v3 71/77] ncr5380: Cleanup whitespace and parentheses Finn Thain
2015-12-22 8:06 ` Hannes Reinecke
2015-12-22 1:18 ` [PATCH v3 72/77] ncr5380: Fix pseudo DMA transfers on 53C400 Finn Thain
2015-12-22 8:06 ` Hannes Reinecke
2015-12-22 1:18 ` [PATCH v3 73/77] ncr5380: Use runtime register mapping Finn Thain
2015-12-22 8:07 ` Hannes Reinecke
2015-12-22 1:18 ` [PATCH v3 74/77] ncr5380: Enable PDMA for NCR53C400A Finn Thain
2015-12-22 8:07 ` Hannes Reinecke
2015-12-22 1:18 ` [PATCH v3 75/77] ncr5380: Enable PDMA for DTC chips Finn Thain
2015-12-22 8:08 ` Hannes Reinecke
2015-12-22 1:18 ` [PATCH v3 76/77] ncr5380: Fix wait for 53C80 registers registers after PDMA Finn Thain
2015-12-22 8:08 ` Hannes Reinecke
2015-12-22 1:18 ` [PATCH v3 77/77] ncr5380: Add support for HP C2502 Finn Thain
2015-12-22 8:09 ` Hannes Reinecke
2015-12-22 20:14 ` [PATCH v3 00/77] More fixes, cleanup and modernization for NCR5380 drivers Ondrej Zary
2016-01-01 1:28 ` Michael Schmitz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20151222011750.245516745@telegraphics.com.au \
--to=fthain@telegraphics.com.au \
--cc=JBottomley@odin.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-m68k@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=martin.petersen@oracle.com \
--cc=schmitzmic@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).