From: Finn Thain <fthain@telegraphics.com.au>
To: "James E.J. Bottomley" <JBottomley@odin.com>,
Michael Schmitz <schmitzmic@gmail.com>,
linux-m68k@vger.kernel.org, linux-scsi@vger.kernel.org,
linux-kernel@vger.kernel.org,
"Martin K. Petersen" <martin.petersen@oracle.com>
Subject: [PATCH v3 64/77] atari_NCR5380: Eliminate HOSTNO macro
Date: Tue, 22 Dec 2015 12:18:42 +1100 [thread overview]
Message-ID: <20151222011755.435468485@telegraphics.com.au> (raw)
In-Reply-To: 20151222011737.980475848@telegraphics.com.au
[-- Attachment #1: atari_NCR5380-remove-HOSTNO-dprintk --]
[-- Type: text/plain, Size: 22251 bytes --]
Keep the two core driver forks in sync.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
---
drivers/scsi/NCR5380.c | 71 +++++++++++++++--------------
drivers/scsi/atari_NCR5380.c | 102 +++++++++++++++++++------------------------
2 files changed, 84 insertions(+), 89 deletions(-)
Index: linux/drivers/scsi/atari_NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/atari_NCR5380.c 2015-12-22 12:17:11.000000000 +1100
+++ linux/drivers/scsi/atari_NCR5380.c 2015-12-22 12:17:12.000000000 +1100
@@ -175,8 +175,6 @@
* possible) function may be used.
*/
-#define HOSTNO instance->host_no
-
static int do_abort(struct Scsi_Host *);
static void do_reset(struct Scsi_Host *);
@@ -1024,10 +1022,8 @@ static void NCR5380_main(struct work_str
&& !hostdata->dma_len
#endif
) {
- dprintk(NDEBUG_MAIN, "scsi%d: main: performing information transfer\n",
- HOSTNO);
+ dsprintk(NDEBUG_MAIN, instance, "main: performing information transfer\n");
NCR5380_information_transfer(instance);
- dprintk(NDEBUG_MAIN, "scsi%d: main: done set false\n", HOSTNO);
done = 0;
}
} while (!done);
@@ -1064,7 +1060,7 @@ static void NCR5380_dma_complete(struct
(BASR_PHASE_MATCH|BASR_ACK)) {
saved_data = NCR5380_read(INPUT_DATA_REG);
overrun = 1;
- dprintk(NDEBUG_DMA, "scsi%d: read overrun handled\n", HOSTNO);
+ dsprintk(NDEBUG_DMA, instance, "read overrun handled\n");
}
}
}
@@ -1169,8 +1165,8 @@ static irqreturn_t NCR5380_intr(int irq,
unsigned char mr = NCR5380_read(MODE_REG);
unsigned char sr = NCR5380_read(STATUS_REG);
- dprintk(NDEBUG_INTR, "scsi%d: IRQ %d, BASR 0x%02x, SR 0x%02x, MR 0x%02x\n",
- HOSTNO, irq, basr, sr, mr);
+ dsprintk(NDEBUG_INTR, instance, "IRQ %d, BASR 0x%02x, SR 0x%02x, MR 0x%02x\n",
+ irq, basr, sr, mr);
#if defined(REAL_DMA)
if ((mr & MR_DMA_MODE) || (mr & MR_MONITOR_BSY)) {
@@ -1179,7 +1175,7 @@ static irqreturn_t NCR5380_intr(int irq,
* for End of DMA errata need to happen in DMA Mode.
*/
- dprintk(NDEBUG_INTR, "scsi%d: interrupt in DMA mode\n", HOSTNO);
+ dsprintk(NDEBUG_INTR, instance, "interrupt in DMA mode\n");
if (hostdata->connected) {
NCR5380_dma_complete(instance);
@@ -1196,8 +1192,7 @@ static irqreturn_t NCR5380_intr(int irq,
NCR5380_write(SELECT_ENABLE_REG, 0);
NCR5380_read(RESET_PARITY_INTERRUPT_REG);
- dprintk(NDEBUG_INTR, "scsi%d: interrupt with SEL and IO\n",
- HOSTNO);
+ dsprintk(NDEBUG_INTR, instance, "interrupt with SEL and IO\n");
if (!hostdata->connected) {
NCR5380_reselect(instance);
@@ -1209,7 +1204,7 @@ static irqreturn_t NCR5380_intr(int irq,
/* Probably Bus Reset */
NCR5380_read(RESET_PARITY_INTERRUPT_REG);
- dprintk(NDEBUG_INTR, "scsi%d: unknown interrupt\n", HOSTNO);
+ dsprintk(NDEBUG_INTR, instance, "unknown interrupt\n");
#ifdef SUN3_SCSI_VME
dregs->csr |= CSR_DMA_ENABLE;
#endif
@@ -1266,8 +1261,8 @@ static struct scsi_cmnd *NCR5380_select(
int err;
NCR5380_dprint(NDEBUG_ARBITRATION, instance);
- dprintk(NDEBUG_ARBITRATION, "scsi%d: starting arbitration, id = %d\n", HOSTNO,
- instance->this_id);
+ dsprintk(NDEBUG_ARBITRATION, instance, "starting arbitration, id = %d\n",
+ instance->this_id);
/*
* Arbitration and selection phases are slow and involve dropping the
@@ -1321,8 +1316,7 @@ static struct scsi_cmnd *NCR5380_select(
(NCR5380_read(CURRENT_SCSI_DATA_REG) & hostdata->id_higher_mask) ||
(NCR5380_read(INITIATOR_COMMAND_REG) & ICR_ARBITRATION_LOST)) {
NCR5380_write(MODE_REG, MR_BASE);
- dprintk(NDEBUG_ARBITRATION, "scsi%d: lost arbitration, deasserting MR_ARBITRATE\n",
- HOSTNO);
+ dsprintk(NDEBUG_ARBITRATION, instance, "lost arbitration, deasserting MR_ARBITRATE\n");
spin_lock_irq(&hostdata->lock);
goto out;
}
@@ -1356,7 +1350,7 @@ static struct scsi_cmnd *NCR5380_select(
goto out;
}
- dprintk(NDEBUG_ARBITRATION, "scsi%d: won arbitration\n", HOSTNO);
+ dsprintk(NDEBUG_ARBITRATION, instance, "won arbitration\n");
/*
* Now that we have won arbitration, start Selection process, asserting
@@ -1412,7 +1406,7 @@ static struct scsi_cmnd *NCR5380_select(
udelay(1);
- dprintk(NDEBUG_SELECTION, "scsi%d: selecting target %d\n", HOSTNO, cmd->device->id);
+ dsprintk(NDEBUG_SELECTION, instance, "selecting target %d\n", scmd_id(cmd));
/*
* The SCSI specification calls for a 250 ms timeout for the actual
@@ -1486,8 +1480,8 @@ static struct scsi_cmnd *NCR5380_select(
goto out;
}
- dprintk(NDEBUG_SELECTION, "scsi%d: target %d selected, going into MESSAGE OUT phase.\n",
- HOSTNO, cmd->device->id);
+ dsprintk(NDEBUG_SELECTION, instance, "target %d selected, going into MESSAGE OUT phase.\n",
+ scmd_id(cmd));
tmp[0] = IDENTIFY(1, cmd->device->lun);
#ifdef SUPPORT_TAGS
@@ -1506,7 +1500,7 @@ static struct scsi_cmnd *NCR5380_select(
data = tmp;
phase = PHASE_MSGOUT;
NCR5380_transfer_pio(instance, &phase, &len, &data);
- dprintk(NDEBUG_SELECTION, "scsi%d: nexus established.\n", HOSTNO);
+ dsprintk(NDEBUG_SELECTION, instance, "nexus established.\n");
/* XXX need to handle errors here */
hostdata->connected = cmd;
@@ -1578,11 +1572,11 @@ static int NCR5380_transfer_pio(struct S
if (NCR5380_poll_politely(instance, STATUS_REG, SR_REQ, SR_REQ, HZ) < 0)
break;
- dprintk(NDEBUG_HANDSHAKE, "scsi%d: REQ detected\n", HOSTNO);
+ dsprintk(NDEBUG_HANDSHAKE, instance, "REQ asserted\n");
/* Check for phase mismatch */
if ((NCR5380_read(STATUS_REG) & PHASE_MASK) != p) {
- dprintk(NDEBUG_PIO, "scsi%d: phase mismatch\n", HOSTNO);
+ dsprintk(NDEBUG_PIO, instance, "phase mismatch\n");
NCR5380_dprint_phase(NDEBUG_PIO, instance);
break;
}
@@ -1624,7 +1618,7 @@ static int NCR5380_transfer_pio(struct S
STATUS_REG, SR_REQ, 0, 5 * HZ) < 0)
break;
- dprintk(NDEBUG_HANDSHAKE, "scsi%d: req false, handshake complete\n", HOSTNO);
+ dsprintk(NDEBUG_HANDSHAKE, instance, "REQ negated, handshake complete\n");
/*
* We have several special cases to consider during REQ/ACK handshaking :
@@ -1645,7 +1639,7 @@ static int NCR5380_transfer_pio(struct S
}
} while (--c);
- dprintk(NDEBUG_PIO, "scsi%d: residual %d\n", HOSTNO, c);
+ dsprintk(NDEBUG_PIO, instance, "residual %d\n", c);
*count = c;
*data = d;
@@ -1791,9 +1785,8 @@ static int NCR5380_transfer_dma(struct S
}
hostdata->dma_len = c;
- dprintk(NDEBUG_DMA, "scsi%d: initializing DMA for %s, %d bytes %s %p\n",
- instance->host_no, (p & SR_IO) ? "reading" : "writing",
- c, (p & SR_IO) ? "to" : "from", *data);
+ dsprintk(NDEBUG_DMA, instance, "initializing DMA %s: length %d, address %p\n",
+ (p & SR_IO) ? "receive" : "send", c, *data);
/* netbsd turns off ints here, why not be safe and do it too */
@@ -1829,9 +1822,8 @@ static int NCR5380_transfer_dma(struct S
if (hostdata->read_overruns && (p & SR_IO))
c -= hostdata->read_overruns;
- dprintk(NDEBUG_DMA, "scsi%d: initializing DMA for %s, %d bytes %s %p\n",
- HOSTNO, (p & SR_IO) ? "reading" : "writing",
- c, (p & SR_IO) ? "to" : "from", d);
+ dsprintk(NDEBUG_DMA, instance, "initializing DMA %s: length %d, address %p\n",
+ (p & SR_IO) ? "receive" : "send", c, d);
NCR5380_write(TARGET_COMMAND_REG, PHASE_SR_TO_TCR(p));
NCR5380_write(MODE_REG, MR_BASE | MR_DMA_MODE | MR_MONITOR_BSY |
@@ -1978,9 +1970,9 @@ static void NCR5380_information_transfer
* they are at contiguous physical addresses.
*/
merge_contiguous_buffers(cmd);
- dprintk(NDEBUG_INFORMATION, "scsi%d: %d bytes and %d buffers left\n",
- HOSTNO, cmd->SCp.this_residual,
- cmd->SCp.buffers_residual);
+ dsprintk(NDEBUG_INFORMATION, instance, "%d bytes and %d buffers left\n",
+ cmd->SCp.this_residual,
+ cmd->SCp.buffers_residual);
}
/*
@@ -2068,11 +2060,12 @@ static void NCR5380_information_transfer
#ifdef SUPPORT_TAGS
cmd_free_tag(cmd);
if (status_byte(cmd->SCp.Status) == QUEUE_FULL) {
- struct tag_alloc *ta = &hostdata->TagAlloc[scmd_id(cmd)][cmd->device->lun];
- dprintk(NDEBUG_TAGS, "scsi%d: target %d lun %llu returned "
- "QUEUE_FULL after %d commands\n",
- HOSTNO, cmd->device->id, cmd->device->lun,
- ta->nr_allocated);
+ u8 lun = cmd->device->lun;
+ struct tag_alloc *ta = &hostdata->TagAlloc[scmd_id(cmd)][lun];
+
+ dsprintk(NDEBUG_TAGS, instance,
+ "QUEUE_FULL %p target %d lun %d nr_allocated %d\n",
+ cmd, scmd_id(cmd), lun, ta->nr_allocated);
if (ta->queue_size > ta->nr_allocated)
ta->queue_size = ta->nr_allocated;
}
@@ -2126,10 +2119,8 @@ static void NCR5380_information_transfer
cmd->device->tagged_supported = 0;
hostdata->busy[cmd->device->id] |= (1 << cmd->device->lun);
cmd->tag = TAG_NONE;
- dprintk(NDEBUG_TAGS, "scsi%d: target %d lun %llu rejected "
- "QUEUE_TAG message; tagged queuing "
- "disabled\n",
- HOSTNO, cmd->device->id, cmd->device->lun);
+ dsprintk(NDEBUG_TAGS, instance, "target %d lun %llu rejected QUEUE_TAG message; tagged queuing disabled\n",
+ scmd_id(cmd), cmd->device->lun);
break;
}
break;
@@ -2188,14 +2179,15 @@ static void NCR5380_information_transfer
spin_unlock_irq(&hostdata->lock);
- dprintk(NDEBUG_EXTENDED, "scsi%d: receiving extended message\n", HOSTNO);
+ dsprintk(NDEBUG_EXTENDED, instance, "receiving extended message\n");
len = 2;
data = extended_msg + 1;
phase = PHASE_MSGIN;
NCR5380_transfer_pio(instance, &phase, &len, &data);
- dprintk(NDEBUG_EXTENDED, "scsi%d: length=%d, code=0x%02x\n", HOSTNO,
- (int)extended_msg[1], (int)extended_msg[2]);
+ dsprintk(NDEBUG_EXTENDED, instance, "length %d, code 0x%02x\n",
+ (int)extended_msg[1],
+ (int)extended_msg[2]);
if (!len && extended_msg[1] > 0 &&
extended_msg[1] <= sizeof(extended_msg) - 2) {
@@ -2206,8 +2198,8 @@ static void NCR5380_information_transfer
phase = PHASE_MSGIN;
NCR5380_transfer_pio(instance, &phase, &len, &data);
- dprintk(NDEBUG_EXTENDED, "scsi%d: message received, residual %d\n",
- HOSTNO, len);
+ dsprintk(NDEBUG_EXTENDED, instance, "message received, residual %d\n",
+ len);
switch (extended_msg[2]) {
case EXTENDED_SDTR:
@@ -2335,7 +2327,7 @@ static void NCR5380_reselect(struct Scsi
target_mask = NCR5380_read(CURRENT_SCSI_DATA_REG) & ~(hostdata->id_mask);
- dprintk(NDEBUG_RESELECTION, "scsi%d: reselect\n", HOSTNO);
+ dsprintk(NDEBUG_RESELECTION, instance, "reselect\n");
/*
* At this point, we have detected that our SCSI ID is on the bus,
@@ -2405,8 +2397,8 @@ static void NCR5380_reselect(struct Scsi
if (!NCR5380_transfer_pio(instance, &phase, &len, &data) &&
msg[1] == SIMPLE_QUEUE_TAG)
tag = msg[2];
- dprintk(NDEBUG_TAGS, "scsi%d: target mask %02x, lun %d sent tag %d at "
- "reselection\n", HOSTNO, target_mask, lun, tag);
+ dsprintk(NDEBUG_TAGS, instance, "reselect: target mask %02x, lun %d sent tag %d\n",
+ target_mask, lun, tag);
}
#endif
@@ -2491,14 +2483,14 @@ static void NCR5380_reselect(struct Scsi
if (!NCR5380_transfer_pio(instance, &phase, &len, &data) &&
msg[1] == SIMPLE_QUEUE_TAG)
tag = msg[2];
- dprintk(NDEBUG_TAGS, "scsi%d: target mask %02x, lun %d sent tag %d at reselection\n"
- HOSTNO, target_mask, lun, tag);
+ dsprintk(NDEBUG_TAGS, instance, "reselect: target mask %02x, lun %d sent tag %d\n"
+ target_mask, lun, tag);
}
#endif
hostdata->connected = tmp;
- dprintk(NDEBUG_RESELECTION, "scsi%d: nexus established, target = %d, lun = %llu, tag = %d\n",
- HOSTNO, tmp->device->id, tmp->device->lun, tmp->tag);
+ dsprintk(NDEBUG_RESELECTION, instance, "nexus established, target %d, lun %llu, tag %d\n",
+ scmd_id(tmp), tmp->device->lun, tmp->tag);
}
Index: linux/drivers/scsi/NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/NCR5380.c 2015-12-22 12:17:11.000000000 +1100
+++ linux/drivers/scsi/NCR5380.c 2015-12-22 12:17:12.000000000 +1100
@@ -926,9 +926,8 @@ static void NCR5380_main(struct work_str
&& !hostdata->dmalen
#endif
) {
- dprintk(NDEBUG_MAIN, "scsi%d : main() : performing information transfer\n", instance->host_no);
+ dsprintk(NDEBUG_MAIN, instance, "main: performing information transfer\n");
NCR5380_information_transfer(instance);
- dprintk(NDEBUG_MAIN, "scsi%d : main() : done set false\n", instance->host_no);
done = 0;
}
} while (!done);
@@ -986,8 +985,8 @@ static irqreturn_t NCR5380_intr(int irq,
unsigned char mr = NCR5380_read(MODE_REG);
unsigned char sr = NCR5380_read(STATUS_REG);
- dprintk(NDEBUG_INTR, "scsi%d: IRQ %d, BASR 0x%02x, SR 0x%02x, MR 0x%02x\n",
- instance->host_no, irq, basr, sr, mr);
+ dsprintk(NDEBUG_INTR, instance, "IRQ %d, BASR 0x%02x, SR 0x%02x, MR 0x%02x\n",
+ irq, basr, sr, mr);
#if defined(REAL_DMA)
if ((mr & MR_DMA_MODE) || (mr & MR_MONITOR_BSY)) {
@@ -996,7 +995,7 @@ static irqreturn_t NCR5380_intr(int irq,
* for End of DMA errata need to happen in DMA Mode.
*/
- dprintk(NDEBUG_INTR, "scsi%d: interrupt in DMA mode\n", intance->host_no);
+ dsprintk(NDEBUG_INTR, instance, "interrupt in DMA mode\n");
int transferred;
@@ -1023,8 +1022,7 @@ static irqreturn_t NCR5380_intr(int irq,
NCR5380_write(SELECT_ENABLE_REG, 0);
NCR5380_read(RESET_PARITY_INTERRUPT_REG);
- dprintk(NDEBUG_INTR, "scsi%d: interrupt with SEL and IO\n",
- instance->host_no);
+ dsprintk(NDEBUG_INTR, instance, "interrupt with SEL and IO\n");
if (!hostdata->connected) {
NCR5380_reselect(instance);
@@ -1036,7 +1034,7 @@ static irqreturn_t NCR5380_intr(int irq,
/* Probably Bus Reset */
NCR5380_read(RESET_PARITY_INTERRUPT_REG);
- dprintk(NDEBUG_INTR, "scsi%d: unknown interrupt\n", instance->host_no);
+ dsprintk(NDEBUG_INTR, instance, "unknown interrupt\n");
}
handled = 1;
} else {
@@ -1091,7 +1089,8 @@ static struct scsi_cmnd *NCR5380_select(
int err;
NCR5380_dprint(NDEBUG_ARBITRATION, instance);
- dprintk(NDEBUG_ARBITRATION, "scsi%d : starting arbitration, id = %d\n", instance->host_no, instance->this_id);
+ dsprintk(NDEBUG_ARBITRATION, instance, "starting arbitration, id = %d\n",
+ instance->this_id);
/*
* Arbitration and selection phases are slow and involve dropping the
@@ -1143,7 +1142,7 @@ static struct scsi_cmnd *NCR5380_select(
/* Check for lost arbitration */
if ((NCR5380_read(INITIATOR_COMMAND_REG) & ICR_ARBITRATION_LOST) || (NCR5380_read(CURRENT_SCSI_DATA_REG) & hostdata->id_higher_mask) || (NCR5380_read(INITIATOR_COMMAND_REG) & ICR_ARBITRATION_LOST)) {
NCR5380_write(MODE_REG, MR_BASE);
- dprintk(NDEBUG_ARBITRATION, "scsi%d : lost arbitration, deasserting MR_ARBITRATE\n", instance->host_no);
+ dsprintk(NDEBUG_ARBITRATION, instance, "lost arbitration, deasserting MR_ARBITRATE\n");
spin_lock_irq(&hostdata->lock);
goto out;
}
@@ -1177,7 +1176,7 @@ static struct scsi_cmnd *NCR5380_select(
goto out;
}
- dprintk(NDEBUG_ARBITRATION, "scsi%d : won arbitration\n", instance->host_no);
+ dsprintk(NDEBUG_ARBITRATION, instance, "won arbitration\n");
/*
* Now that we have won arbitration, start Selection process, asserting
@@ -1231,7 +1230,7 @@ static struct scsi_cmnd *NCR5380_select(
udelay(1);
- dprintk(NDEBUG_SELECTION, "scsi%d : selecting target %d\n", instance->host_no, scmd_id(cmd));
+ dsprintk(NDEBUG_SELECTION, instance, "selecting target %d\n", scmd_id(cmd));
/*
* The SCSI specification calls for a 250 ms timeout for the actual
@@ -1305,7 +1304,8 @@ static struct scsi_cmnd *NCR5380_select(
goto out;
}
- dprintk(NDEBUG_SELECTION, "scsi%d : target %d selected, going into MESSAGE OUT phase.\n", instance->host_no, cmd->device->id);
+ dsprintk(NDEBUG_SELECTION, instance, "target %d selected, going into MESSAGE OUT phase.\n",
+ scmd_id(cmd));
tmp[0] = IDENTIFY(((instance->irq == NO_IRQ) ? 0 : 1), cmd->device->lun);
len = 1;
@@ -1315,7 +1315,7 @@ static struct scsi_cmnd *NCR5380_select(
data = tmp;
phase = PHASE_MSGOUT;
NCR5380_transfer_pio(instance, &phase, &len, &data);
- dprintk(NDEBUG_SELECTION, "scsi%d : nexus established.\n", instance->host_no);
+ dsprintk(NDEBUG_SELECTION, instance, "nexus established.\n");
/* XXX need to handle errors here */
hostdata->connected = cmd;
@@ -1362,11 +1362,6 @@ static int NCR5380_transfer_pio(struct S
int c = *count;
unsigned char *d = *data;
- if (!(p & SR_IO))
- dprintk(NDEBUG_PIO, "scsi%d : pio write %d bytes\n", instance->host_no, c);
- else
- dprintk(NDEBUG_PIO, "scsi%d : pio read %d bytes\n", instance->host_no, c);
-
/*
* The NCR5380 chip will only drive the SCSI bus when the
* phase specified in the appropriate bits of the TARGET COMMAND
@@ -1384,12 +1379,12 @@ static int NCR5380_transfer_pio(struct S
if (NCR5380_poll_politely(instance, STATUS_REG, SR_REQ, SR_REQ, HZ) < 0)
break;
- dprintk(NDEBUG_HANDSHAKE, "scsi%d : REQ detected\n", instance->host_no);
+ dsprintk(NDEBUG_HANDSHAKE, instance, "REQ asserted\n");
/* Check for phase mismatch */
if ((NCR5380_read(STATUS_REG) & PHASE_MASK) != p) {
- dprintk(NDEBUG_HANDSHAKE, "scsi%d : phase mismatch\n", instance->host_no);
- NCR5380_dprint_phase(NDEBUG_HANDSHAKE, instance);
+ dsprintk(NDEBUG_PIO, instance, "phase mismatch\n");
+ NCR5380_dprint_phase(NDEBUG_PIO, instance);
break;
}
/* Do actual transfer from SCSI bus to / from memory */
@@ -1426,7 +1421,7 @@ static int NCR5380_transfer_pio(struct S
STATUS_REG, SR_REQ, 0, 5 * HZ) < 0)
break;
- dprintk(NDEBUG_HANDSHAKE, "scsi%d : req false, handshake complete\n", instance->host_no);
+ dsprintk(NDEBUG_HANDSHAKE, instance, "REQ negated, handshake complete\n");
/*
* We have several special cases to consider during REQ/ACK handshaking :
@@ -1447,7 +1442,7 @@ static int NCR5380_transfer_pio(struct S
}
} while (--c);
- dprintk(NDEBUG_PIO, "scsi%d : residual %d\n", instance->host_no, c);
+ dsprintk(NDEBUG_PIO, instance, "residual %d\n", c);
*count = c;
*data = d;
@@ -1597,8 +1592,10 @@ static int NCR5380_transfer_dma(struct S
if (!(hostdata->flags & FLAG_NO_DMA_FIXUPS))
c -= 2;
}
- dprintk(NDEBUG_DMA, "scsi%d : initializing DMA channel %d for %s, %d bytes %s %0x\n", instance->host_no, instance->dma_channel, (p & SR_IO) ? "reading" : "writing", c, (p & SR_IO) ? "to" : "from", (unsigned) d);
hostdata->dma_len = (p & SR_IO) ? NCR5380_dma_read_setup(instance, d, c) : NCR5380_dma_write_setup(instance, d, c);
+
+ dsprintk(NDEBUG_DMA, instance, "initializing DMA %s: length %d, address %p\n",
+ (p & SR_IO) ? "receive" : "send", c, *data);
#endif
NCR5380_write(TARGET_COMMAND_REG, PHASE_SR_TO_TCR(p));
@@ -1700,7 +1697,8 @@ static int NCR5380_transfer_dma(struct S
}
}
- dprintk(NDEBUG_DMA, "scsi%d : polled DMA transfer complete, basr 0x%X, sr 0x%X\n", instance->host_no, tmp, NCR5380_read(STATUS_REG));
+ dsprintk(NDEBUG_DMA, "polled DMA transfer complete, basr 0x%02x, sr 0x%02x\n",
+ tmp, NCR5380_read(STATUS_REG));
NCR5380_write(MODE_REG, MR_BASE);
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
@@ -1870,7 +1868,9 @@ static void NCR5380_information_transfer
--cmd->SCp.buffers_residual;
cmd->SCp.this_residual = cmd->SCp.buffer->length;
cmd->SCp.ptr = sg_virt(cmd->SCp.buffer);
- dprintk(NDEBUG_INFORMATION, "scsi%d : %d bytes and %d buffers left\n", instance->host_no, cmd->SCp.this_residual, cmd->SCp.buffers_residual);
+ dsprintk(NDEBUG_INFORMATION, instance, "%d bytes and %d buffers left\n",
+ cmd->SCp.this_residual,
+ cmd->SCp.buffers_residual);
}
/*
* The preferred transfer method is going to be
@@ -2025,14 +2025,15 @@ static void NCR5380_information_transfer
spin_unlock_irq(&hostdata->lock);
- dprintk(NDEBUG_EXTENDED, "scsi%d : receiving extended message\n", instance->host_no);
+ dsprintk(NDEBUG_EXTENDED, instance, "receiving extended message\n");
len = 2;
data = extended_msg + 1;
phase = PHASE_MSGIN;
NCR5380_transfer_pio(instance, &phase, &len, &data);
-
- dprintk(NDEBUG_EXTENDED, "scsi%d : length=%d, code=0x%02x\n", instance->host_no, (int) extended_msg[1], (int) extended_msg[2]);
+ dsprintk(NDEBUG_EXTENDED, instance, "length %d, code 0x%02x\n",
+ (int)extended_msg[1],
+ (int)extended_msg[2]);
if (!len && extended_msg[1] > 0 &&
extended_msg[1] <= sizeof(extended_msg) - 2) {
@@ -2043,7 +2044,8 @@ static void NCR5380_information_transfer
phase = PHASE_MSGIN;
NCR5380_transfer_pio(instance, &phase, &len, &data);
- dprintk(NDEBUG_EXTENDED, "scsi%d : message received, residual %d\n", instance->host_no, len);
+ dsprintk(NDEBUG_EXTENDED, instance, "message received, residual %d\n",
+ len);
switch (extended_msg[2]) {
case EXTENDED_SDTR:
@@ -2160,7 +2162,8 @@ static void NCR5380_reselect(struct Scsi
NCR5380_write(MODE_REG, MR_BASE);
target_mask = NCR5380_read(CURRENT_SCSI_DATA_REG) & ~(hostdata->id_mask);
- dprintk(NDEBUG_RESELECTION, "scsi%d : reselect\n", instance->host_no);
+
+ dsprintk(NDEBUG_RESELECTION, instance, "reselect\n");
/*
* At this point, we have detected that our SCSI ID is on the bus,
@@ -2249,8 +2252,8 @@ static void NCR5380_reselect(struct Scsi
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
hostdata->connected = tmp;
- dprintk(NDEBUG_RESELECTION, "scsi%d : nexus established, target = %d, lun = %llu, tag = %d\n",
- instance->host_no, tmp->device->id, tmp->device->lun, tmp->tag);
+ dsprintk(NDEBUG_RESELECTION, instance, "nexus established, target %d, lun %llu, tag %d\n",
+ scmd_id(tmp), tmp->device->lun, tmp->tag);
}
/*
next prev parent reply other threads:[~2015-12-22 1:18 UTC|newest]
Thread overview: 156+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-12-22 1:17 [PATCH v3 00/77] More fixes, cleanup and modernization for NCR5380 drivers Finn Thain
2015-12-22 1:17 ` [PATCH v3 01/77] atari_scsi: Fix SCSI host ID setting Finn Thain
2015-12-22 1:17 ` [PATCH v3 02/77] ncr5380: Remove redundant static variable initializers Finn Thain
2015-12-22 1:17 ` [PATCH v3 03/77] ncr5380: Eliminate PDEBUG*, TDEBUG* and DTCDEBUG* macros Finn Thain
2015-12-22 1:17 ` [PATCH v3 04/77] ncr5380: Remove more pointless macros Finn Thain
2015-12-22 1:17 ` [PATCH v3 05/77] ncr5380: Remove NCR5380_local_declare and NCR5380_setup macros Finn Thain
2015-12-22 1:17 ` [PATCH v3 06/77] ncr5380: Remove NCR5380_instance_name macro Finn Thain
2015-12-22 1:17 ` [PATCH v3 07/77] ncr5380: Split NCR5380_init() into two functions Finn Thain
2015-12-22 1:17 ` [PATCH v3 08/77] ncr5380: Move NCR53C400-specific code Finn Thain
2015-12-22 1:17 ` [PATCH v3 09/77] atari_NCR5380: Reset bus on driver initialization if required Finn Thain
2015-12-22 1:17 ` [PATCH v3 10/77] atari_NCR5380: Remove RESET_BOOT, CONFIG_ATARI_SCSI_TOSHIBA_DELAY and CONFIG_ATARI_SCSI_RESET_BOOT Finn Thain
2015-12-22 1:17 ` [PATCH v3 11/77] ncr5380: Simplify bus reset handlers Finn Thain
2015-12-22 1:17 ` [PATCH v3 12/77] ncr5380: Remove unused hostdata->aborted flag Finn Thain
2015-12-22 1:17 ` [PATCH v3 13/77] ncr5380: Remove redundant register writes Finn Thain
2015-12-22 1:17 ` [PATCH v3 14/77] ncr5380: Use return instead of goto in NCR5380_select() Finn Thain
2015-12-22 1:17 ` [PATCH v3 15/77] ncr5380: Always escalate bad target time-out " Finn Thain
2015-12-22 1:17 ` [PATCH v3 16/77] ncr5380: Proceed with next command after NCR5380_select() calls scsi_done Finn Thain
2015-12-22 1:17 ` [PATCH v3 17/77] ncr5380: Keep BSY asserted when entering SELECTION phase Finn Thain
2015-12-22 7:01 ` Hannes Reinecke
2015-12-22 1:17 ` [PATCH v3 18/77] ncr5380: Eliminate USLEEP_WAITLONG delay Finn Thain
2015-12-22 7:05 ` Hannes Reinecke
2015-12-22 12:38 ` Finn Thain
2015-12-22 13:37 ` Hannes Reinecke
2015-12-22 1:17 ` [PATCH v3 19/77] ncr5380: Cleanup bogus {request, release}_region() calls Finn Thain
2015-12-22 7:05 ` [PATCH v3 19/77] ncr5380: Cleanup bogus {request,release}_region() calls Hannes Reinecke
2015-12-22 1:17 ` [PATCH v3 20/77] ncr5380: Introduce unbound workqueue Finn Thain
2015-12-22 7:10 ` Hannes Reinecke
2015-12-22 12:44 ` Finn Thain
2015-12-22 14:48 ` Hannes Reinecke
2015-12-22 1:17 ` [PATCH v3 21/77] ncr5380: Sleep when polling, if possible Finn Thain
2015-12-22 7:12 ` Hannes Reinecke
2015-12-22 1:18 ` [PATCH v3 22/77] ncr5380: Eliminate selecting state Finn Thain
2015-12-22 7:14 ` Hannes Reinecke
2015-12-22 1:18 ` [PATCH v3 23/77] ncr5380: Always retry arbitration and selection Finn Thain
2015-12-22 7:14 ` Hannes Reinecke
2015-12-22 1:18 ` [PATCH v3 24/77] ncr5380: Implement NCR5380_dma_xfer_len and remove LIMIT_TRANSFERSIZE macro Finn Thain
2015-12-22 7:17 ` Hannes Reinecke
2015-12-22 1:18 ` [PATCH v3 25/77] ncr5380: Rework disconnect versus poll logic Finn Thain
2015-12-22 7:21 ` Hannes Reinecke
2015-12-22 1:18 ` [PATCH v3 26/77] ncr5380: Fix NCR5380_transfer_pio() result Finn Thain
2015-12-22 7:22 ` Hannes Reinecke
2015-12-22 1:18 ` [PATCH v3 27/77] ncr5380: Add missing lock in eh_abort_handler Finn Thain
2015-12-22 7:23 ` Hannes Reinecke
2015-12-22 1:18 ` [PATCH v3 28/77] ncr5380: Drop DEF_SCSI_QCMD macro Finn Thain
2015-12-22 7:24 ` Hannes Reinecke
2015-12-22 1:18 ` [PATCH v3 29/77] ncr5380: Remove references to linked commands Finn Thain
2015-12-22 7:25 ` Hannes Reinecke
2015-12-22 1:18 ` [PATCH v3 30/77] ncr5380: Add missing break after case MESSAGE_REJECT Finn Thain
2015-12-22 7:26 ` Hannes Reinecke
2015-12-22 1:18 ` [PATCH v3 31/77] ncr5380: Fix !REQ timeout in do_abort() Finn Thain
2015-12-22 7:26 ` Hannes Reinecke
2015-12-22 1:18 ` [PATCH v3 32/77] ncr5380: Fix bus phase " Finn Thain
2015-12-22 7:27 ` Hannes Reinecke
2015-12-22 1:18 ` [PATCH v3 33/77] atari_NCR5380: Set do_abort() timeouts Finn Thain
2015-12-22 7:29 ` Hannes Reinecke
2015-12-22 1:18 ` [PATCH v3 34/77] atari_NCR5380: Use arbitration timeout Finn Thain
2015-12-22 7:30 ` Hannes Reinecke
2015-12-22 1:18 ` [PATCH v3 35/77] ncr5380: Dont wait for BUS FREE after disconnect Finn Thain
2015-12-22 7:31 ` Hannes Reinecke
2015-12-22 1:18 ` [PATCH v3 36/77] ncr5380: Use work_struct instead of delayed_work Finn Thain
2015-12-22 7:32 ` Hannes Reinecke
2015-12-22 1:18 ` [PATCH v3 37/77] ncr5380: Standardize work queueing algorithm Finn Thain
2015-12-22 7:33 ` Hannes Reinecke
2015-12-22 1:18 ` [PATCH v3 38/77] ncr5380: Remove UNSAFE macro Finn Thain
2015-12-22 7:34 ` Hannes Reinecke
2015-12-22 1:18 ` [PATCH v3 39/77] ncr5380: Standardize interrupt handling Finn Thain
2015-12-22 7:36 ` Hannes Reinecke
2015-12-22 1:18 ` [PATCH v3 40/77] ncr5380: Introduce NCR5380_poll_politely2 Finn Thain
2015-12-22 7:37 ` Hannes Reinecke
2015-12-22 1:18 ` [PATCH v3 41/77] ncr5380: Replace redundant flags with FLAG_NO_DMA_FIXUP Finn Thain
2015-12-22 7:39 ` Hannes Reinecke
2015-12-22 1:18 ` [PATCH v3 42/77] ncr5380: Replace READ_OVERRUNS macro with FLAG_NO_DMA_FIXUPS Finn Thain
2015-12-22 7:39 ` Hannes Reinecke
2015-12-22 1:18 ` [PATCH v3 43/77] ncr5380: Standardize reselection handling Finn Thain
2015-12-22 7:41 ` Hannes Reinecke
2015-12-22 1:18 ` [PATCH v3 44/77] ncr5380: Fix off-by-one bug in extended_msg[] bounds check Finn Thain
2015-12-22 7:41 ` Hannes Reinecke
2015-12-22 1:18 ` [PATCH v3 45/77] ncr5380: Cleanup #include directives Finn Thain
2015-12-22 7:42 ` Hannes Reinecke
2015-12-22 1:18 ` [PATCH v3 46/77] ncr5380: Fix NDEBUG_NO_DATAOUT flag Finn Thain
2015-12-22 7:42 ` Hannes Reinecke
2015-12-22 1:18 ` [PATCH v3 47/77] ncr5380: Fix and cleanup scsi_host_template initializers Finn Thain
2015-12-22 7:43 ` Hannes Reinecke
2015-12-22 1:18 ` [PATCH v3 48/77] atari_NCR5380: Fix queue_size limit Finn Thain
2015-12-22 7:44 ` Hannes Reinecke
2015-12-22 1:18 ` [PATCH v3 49/77] ncr5380: Remove redundant ICR_ARBITRATION_LOST test and eliminate FLAG_DTC3181E Finn Thain
2015-12-22 7:45 ` Hannes Reinecke
2015-12-22 1:18 ` [PATCH v3 50/77] ncr5380: Change instance->host_lock to hostdata->lock Finn Thain
2015-12-22 7:46 ` Hannes Reinecke
2015-12-22 1:18 ` [PATCH v3 51/77] ncr5380: Remove command list debug code Finn Thain
2015-12-22 7:47 ` Hannes Reinecke
2015-12-22 1:18 ` [PATCH v3 52/77] ncr5380: Remove H_NO macro and introduce dsprintk Finn Thain
2015-12-22 7:48 ` Hannes Reinecke
2015-12-22 1:18 ` [PATCH v3 53/77] ncr5380: Use shost_priv helper Finn Thain
2015-12-22 7:48 ` Hannes Reinecke
2015-12-22 1:18 ` [PATCH v3 54/77] ncr5380: Use dsprintk() for queue debugging Finn Thain
2015-12-22 7:50 ` Hannes Reinecke
2015-12-22 1:18 ` [PATCH v3 55/77] ncr5380: Remove LIST and REMOVE macros Finn Thain
2015-12-22 7:50 ` Hannes Reinecke
2015-12-22 1:18 ` [PATCH v3 56/77] ncr5380: Remove redundant volatile qualifiers Finn Thain
2015-12-22 7:51 ` Hannes Reinecke
2015-12-22 1:18 ` [PATCH v3 57/77] ncr5380: Use standard list data structure Finn Thain
2015-12-22 7:55 ` Hannes Reinecke
2015-12-22 1:18 ` [PATCH v3 58/77] ncr5380: Refactor command completion Finn Thain
2015-12-22 7:56 ` Hannes Reinecke
2015-12-22 1:18 ` [PATCH v3 59/77] ncr5380: Fix autosense bugs Finn Thain
2015-12-22 7:57 ` Hannes Reinecke
2015-12-22 1:18 ` [PATCH v3 60/77] ncr5380: Implement new eh_abort_handler Finn Thain
2015-12-22 7:59 ` Hannes Reinecke
2015-12-22 1:18 ` [PATCH v3 61/77] ncr5380: Fix EH during arbitration and selection Finn Thain
2015-12-22 8:00 ` Hannes Reinecke
2015-12-22 1:18 ` [PATCH v3 62/77] ncr5380: Implement new eh_bus_reset_handler Finn Thain
2015-12-22 8:01 ` Hannes Reinecke
2015-12-22 1:18 ` [PATCH v3 63/77] atari_NCR5380: Remove HOSTNO macro from printk() and seq_printf() calls Finn Thain
2015-12-22 8:02 ` Hannes Reinecke
2015-12-22 1:18 ` Finn Thain [this message]
2015-12-22 8:02 ` [PATCH v3 64/77] atari_NCR5380: Eliminate HOSTNO macro Hannes Reinecke
2015-12-22 1:18 ` [PATCH v3 65/77] atari_scsi, sun3_scsi: Remove global Scsi_Host pointer Finn Thain
2015-12-22 8:03 ` Hannes Reinecke
2015-12-22 1:18 ` [PATCH v3 66/77] ncr5380: Fix soft lockups Finn Thain
2015-12-22 8:03 ` Hannes Reinecke
2015-12-22 11:39 ` One Thousand Gnomes
2015-12-22 13:47 ` Finn Thain
2015-12-23 0:42 ` Michael Schmitz
2015-12-22 1:18 ` [PATCH v3 67/77] ncr5380: Cleanup comments Finn Thain
2015-12-22 8:04 ` Hannes Reinecke
2015-12-22 1:18 ` [PATCH v3 68/77] ncr5380: Fix whitespace issues using regexp Finn Thain
2015-12-22 8:04 ` Hannes Reinecke
2015-12-22 14:46 ` Joe Perches
2015-12-23 0:56 ` Finn Thain
2015-12-23 1:13 ` Joe Perches
2015-12-23 2:03 ` Finn Thain
2015-12-23 2:18 ` Joe Perches
2015-12-23 4:14 ` Finn Thain
2015-12-23 1:22 ` James Bottomley
2015-12-23 2:31 ` Finn Thain
2015-12-22 1:18 ` [PATCH v3 69/77] ncr5380: Merge changes from atari_NCR5380.c Finn Thain
2015-12-22 8:05 ` Hannes Reinecke
2015-12-22 1:18 ` [PATCH v3 70/77] atari_NCR5380: Merge changes from NCR5380.c Finn Thain
2015-12-22 8:05 ` Hannes Reinecke
2015-12-22 1:18 ` [PATCH v3 71/77] ncr5380: Cleanup whitespace and parentheses Finn Thain
2015-12-22 8:06 ` Hannes Reinecke
2015-12-22 1:18 ` [PATCH v3 72/77] ncr5380: Fix pseudo DMA transfers on 53C400 Finn Thain
2015-12-22 8:06 ` Hannes Reinecke
2015-12-22 1:18 ` [PATCH v3 73/77] ncr5380: Use runtime register mapping Finn Thain
2015-12-22 8:07 ` Hannes Reinecke
2015-12-22 1:18 ` [PATCH v3 74/77] ncr5380: Enable PDMA for NCR53C400A Finn Thain
2015-12-22 8:07 ` Hannes Reinecke
2015-12-22 1:18 ` [PATCH v3 75/77] ncr5380: Enable PDMA for DTC chips Finn Thain
2015-12-22 8:08 ` Hannes Reinecke
2015-12-22 1:18 ` [PATCH v3 76/77] ncr5380: Fix wait for 53C80 registers registers after PDMA Finn Thain
2015-12-22 8:08 ` Hannes Reinecke
2015-12-22 1:18 ` [PATCH v3 77/77] ncr5380: Add support for HP C2502 Finn Thain
2015-12-22 8:09 ` Hannes Reinecke
2015-12-22 20:14 ` [PATCH v3 00/77] More fixes, cleanup and modernization for NCR5380 drivers Ondrej Zary
2016-01-01 1:28 ` Michael Schmitz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20151222011755.435468485@telegraphics.com.au \
--to=fthain@telegraphics.com.au \
--cc=JBottomley@odin.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-m68k@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
--cc=schmitzmic@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).