From: Finn Thain <fthain@telegraphics.com.au>
To: "James E.J. Bottomley" <JBottomley@odin.com>,
"Martin K. Petersen" <martin.petersen@oracle.com>,
Michael Schmitz <schmitzmic@gmail.com>,
linux-m68k@vger.kernel.org, linux-scsi@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v4 62/78] ncr5380: Implement new eh_bus_reset_handler
Date: Sun, 03 Jan 2016 16:06:03 +1100 [thread overview]
Message-ID: <20160103050517.441803011@telegraphics.com.au> (raw)
In-Reply-To: 20160103050501.042035135@telegraphics.com.au
[-- Attachment #1: ncr5380-new-eh_bus_reset_handler --]
[-- Type: text/plain, Size: 5175 bytes --]
NCR5380.c lacks a sane eh_bus_reset_handler. The atari_NCR5380.c code is
much better but it should not throw out the issue queue (that would be
a host reset) and it neglects to set the result code for commands that it
throws out. Fix these bugs and keep the two core drivers in sync.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: Ondrej Zary <linux@rainbow-software.org>
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
---
drivers/scsi/NCR5380.c | 50 ++++++++++++++++++++++++++++++++++++++++++-
drivers/scsi/atari_NCR5380.c | 39 +++++++++++++++++++--------------
2 files changed, 72 insertions(+), 17 deletions(-)
Index: linux/drivers/scsi/atari_NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/atari_NCR5380.c 2016-01-03 16:04:30.000000000 +1100
+++ linux/drivers/scsi/atari_NCR5380.c 2016-01-03 16:04:32.000000000 +1100
@@ -2694,11 +2694,12 @@ static int NCR5380_bus_reset(struct scsi
struct NCR5380_hostdata *hostdata = shost_priv(instance);
int i;
unsigned long flags;
+ struct NCR5380_cmd *ncmd;
spin_lock_irqsave(&hostdata->lock, flags);
#if (NDEBUG & NDEBUG_ANY)
- scmd_printk(KERN_INFO, cmd, "performing bus reset\n");
+ scmd_printk(KERN_INFO, cmd, __func__);
#endif
NCR5380_dprint(NDEBUG_ANY, instance);
NCR5380_dprint_phase(NDEBUG_ANY, instance);
@@ -2718,27 +2719,32 @@ static int NCR5380_bus_reset(struct scsi
hostdata->selecting = NULL;
- if (hostdata->connected)
- dsprintk(NDEBUG_ABORT, instance, "reset aborted a connected command\n");
- hostdata->connected = NULL;
+ list_for_each_entry(ncmd, &hostdata->disconnected, list) {
+ struct scsi_cmnd *cmd = NCR5380_to_scmd(ncmd);
+
+ set_host_byte(cmd, DID_RESET);
+ cmd->scsi_done(cmd);
+ }
+
+ list_for_each_entry(ncmd, &hostdata->autosense, list) {
+ struct scsi_cmnd *cmd = NCR5380_to_scmd(ncmd);
+
+ set_host_byte(cmd, DID_RESET);
+ cmd->scsi_done(cmd);
+ }
+
+ if (hostdata->connected) {
+ set_host_byte(hostdata->connected, DID_RESET);
+ complete_cmd(instance, hostdata->connected);
+ hostdata->connected = NULL;
+ }
if (hostdata->sensing) {
+ set_host_byte(hostdata->connected, DID_RESET);
complete_cmd(instance, hostdata->sensing);
hostdata->sensing = NULL;
}
- if (!list_empty(&hostdata->autosense))
- dsprintk(NDEBUG_ABORT, instance, "reset aborted autosense list\n");
- INIT_LIST_HEAD(&hostdata->autosense);
-
- if (!list_empty(&hostdata->unissued))
- dsprintk(NDEBUG_ABORT, instance, "reset aborted unissued list\n");
- INIT_LIST_HEAD(&hostdata->unissued);
-
- if (!list_empty(&hostdata->disconnected))
- dsprintk(NDEBUG_ABORT, instance, "reset aborted disconnected list\n");
- INIT_LIST_HEAD(&hostdata->disconnected);
-
#ifdef SUPPORT_TAGS
free_all_tags(hostdata);
#endif
@@ -2748,6 +2754,7 @@ static int NCR5380_bus_reset(struct scsi
hostdata->dma_len = 0;
#endif
+ queue_work(hostdata->work_q, &hostdata->main_task);
maybe_release_dma_irq(instance);
spin_unlock_irqrestore(&hostdata->lock, flags);
Index: linux/drivers/scsi/NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/NCR5380.c 2016-01-03 16:04:30.000000000 +1100
+++ linux/drivers/scsi/NCR5380.c 2016-01-03 16:04:32.000000000 +1100
@@ -2482,18 +2482,66 @@ static int NCR5380_bus_reset(struct scsi
{
struct Scsi_Host *instance = cmd->device->host;
struct NCR5380_hostdata *hostdata = shost_priv(instance);
+ int i;
unsigned long flags;
+ struct NCR5380_cmd *ncmd;
spin_lock_irqsave(&hostdata->lock, flags);
#if (NDEBUG & NDEBUG_ANY)
- scmd_printk(KERN_INFO, cmd, "performing bus reset\n");
+ scmd_printk(KERN_INFO, cmd, __func__);
#endif
NCR5380_dprint(NDEBUG_ANY, instance);
NCR5380_dprint_phase(NDEBUG_ANY, instance);
do_reset(instance);
+ /* reset NCR registers */
+ NCR5380_write(MODE_REG, MR_BASE);
+ NCR5380_write(TARGET_COMMAND_REG, 0);
+ NCR5380_write(SELECT_ENABLE_REG, 0);
+
+ /* After the reset, there are no more connected or disconnected commands
+ * and no busy units; so clear the low-level status here to avoid
+ * conflicts when the mid-level code tries to wake up the affected
+ * commands!
+ */
+
+ hostdata->selecting = NULL;
+
+ list_for_each_entry(ncmd, &hostdata->disconnected, list) {
+ struct scsi_cmnd *cmd = NCR5380_to_scmd(ncmd);
+
+ set_host_byte(cmd, DID_RESET);
+ cmd->scsi_done(cmd);
+ }
+
+ list_for_each_entry(ncmd, &hostdata->autosense, list) {
+ struct scsi_cmnd *cmd = NCR5380_to_scmd(ncmd);
+
+ set_host_byte(cmd, DID_RESET);
+ cmd->scsi_done(cmd);
+ }
+
+ if (hostdata->connected) {
+ set_host_byte(hostdata->connected, DID_RESET);
+ complete_cmd(instance, hostdata->connected);
+ hostdata->connected = NULL;
+ }
+
+ if (hostdata->sensing) {
+ set_host_byte(hostdata->connected, DID_RESET);
+ complete_cmd(instance, hostdata->sensing);
+ hostdata->sensing = NULL;
+ }
+
+ for (i = 0; i < 8; ++i)
+ hostdata->busy[i] = 0;
+#ifdef REAL_DMA
+ hostdata->dma_len = 0;
+#endif
+
+ queue_work(hostdata->work_q, &hostdata->main_task);
spin_unlock_irqrestore(&hostdata->lock, flags);
return SUCCESS;
next prev parent reply other threads:[~2016-01-03 5:06 UTC|newest]
Thread overview: 94+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-01-03 5:05 [PATCH v4 00/78] More fixes, cleanup and modernization for NCR5380 drivers Finn Thain
2016-01-03 5:05 ` [PATCH v4 01/78] atari_scsi: Fix SCSI host ID setting Finn Thain
2016-01-03 5:05 ` [PATCH v4 02/78] ncr5380: Remove redundant static variable initializers Finn Thain
2016-01-03 5:05 ` [PATCH v4 03/78] ncr5380: Eliminate PDEBUG*, TDEBUG* and DTCDEBUG* macros Finn Thain
2016-01-03 5:05 ` [PATCH v4 04/78] ncr5380: Remove more pointless macros Finn Thain
2016-01-03 5:05 ` [PATCH v4 05/78] ncr5380: Remove NCR5380_local_declare and NCR5380_setup macros Finn Thain
2016-01-03 5:05 ` [PATCH v4 06/78] ncr5380: Remove NCR5380_instance_name macro Finn Thain
2016-01-03 5:05 ` [PATCH v4 07/78] ncr5380: Split NCR5380_init() into two functions Finn Thain
2016-01-03 5:05 ` [PATCH v4 08/78] ncr5380: Move NCR53C400-specific code Finn Thain
2016-01-03 5:05 ` [PATCH v4 09/78] atari_NCR5380: Reset bus on driver initialization if required Finn Thain
2016-01-03 5:05 ` [PATCH v4 10/78] atari_NCR5380: Remove RESET_BOOT, CONFIG_ATARI_SCSI_TOSHIBA_DELAY and CONFIG_ATARI_SCSI_RESET_BOOT Finn Thain
2016-01-03 5:05 ` [PATCH v4 11/78] ncr5380: Simplify bus reset handlers Finn Thain
2016-01-03 5:05 ` [PATCH v4 12/78] ncr5380: Remove unused hostdata->aborted flag Finn Thain
2016-01-03 5:05 ` [PATCH v4 13/78] ncr5380: Remove redundant register writes Finn Thain
2016-01-03 5:05 ` [PATCH v4 14/78] ncr5380: Use return instead of goto in NCR5380_select() Finn Thain
2016-01-03 5:05 ` [PATCH v4 15/78] ncr5380: Always escalate bad target time-out " Finn Thain
2016-01-03 5:05 ` [PATCH v4 16/78] ncr5380: Proceed with next command after NCR5380_select() calls scsi_done Finn Thain
2016-01-03 5:05 ` [PATCH v4 17/78] ncr5380: Keep BSY asserted when entering SELECTION phase Finn Thain
2016-01-03 5:05 ` [PATCH v4 18/78] ncr5380: Eliminate USLEEP_WAITLONG delay Finn Thain
2016-01-03 5:05 ` [PATCH v4 19/78] ncr5380: Cleanup bogus {request, release}_region() calls Finn Thain
2016-01-03 5:05 ` [PATCH v4 20/78] ncr5380: Introduce unbound workqueue Finn Thain
2016-01-03 5:05 ` [PATCH v4 21/78] ncr5380: Sleep when polling, if possible Finn Thain
2016-01-03 5:05 ` [PATCH v4 22/78] ncr5380: Eliminate selecting state Finn Thain
2016-01-03 5:05 ` [PATCH v4 23/78] ncr5380: Always retry arbitration and selection Finn Thain
2016-01-03 5:05 ` [PATCH v4 24/78] ncr5380: Implement NCR5380_dma_xfer_len and remove LIMIT_TRANSFERSIZE macro Finn Thain
2016-01-03 5:05 ` [PATCH v4 25/78] ncr5380: Rework disconnect versus poll logic Finn Thain
2016-01-03 5:05 ` [PATCH v4 26/78] ncr5380: Fix NCR5380_transfer_pio() result Finn Thain
2016-01-03 5:05 ` [PATCH v4 27/78] ncr5380: Add missing lock in eh_abort_handler Finn Thain
2016-01-03 5:05 ` [PATCH v4 28/78] ncr5380: Drop DEF_SCSI_QCMD macro Finn Thain
2016-01-03 5:05 ` [PATCH v4 29/78] ncr5380: Remove references to linked commands Finn Thain
2016-01-03 5:05 ` [PATCH v4 30/78] ncr5380: Add missing break after case MESSAGE_REJECT Finn Thain
2016-01-03 5:05 ` [PATCH v4 31/78] ncr5380: Fix !REQ timeout in do_abort() Finn Thain
2016-01-03 5:05 ` [PATCH v4 32/78] ncr5380: Fix bus phase " Finn Thain
2016-01-03 5:05 ` [PATCH v4 33/78] atari_NCR5380: Set do_abort() timeouts Finn Thain
2016-01-03 5:05 ` [PATCH v4 34/78] atari_NCR5380: Use arbitration timeout Finn Thain
2016-01-24 10:38 ` Geert Uytterhoeven
2016-01-25 2:45 ` Finn Thain
2016-01-25 8:05 ` Geert Uytterhoeven
2016-01-25 18:28 ` Andreas Schwab
2016-01-25 19:56 ` Michael Schmitz
2016-01-26 0:18 ` Finn Thain
2016-01-26 11:13 ` Geert Uytterhoeven
2016-01-03 5:05 ` [PATCH v4 35/78] ncr5380: Dont wait for BUS FREE after disconnect Finn Thain
2016-01-03 5:05 ` [PATCH v4 36/78] ncr5380: Use work_struct instead of delayed_work Finn Thain
2016-01-03 5:05 ` [PATCH v4 37/78] ncr5380: Standardize work queueing algorithm Finn Thain
2016-01-03 5:05 ` [PATCH v4 38/78] ncr5380: Remove UNSAFE macro Finn Thain
2016-01-03 5:05 ` [PATCH v4 39/78] ncr5380: Standardize interrupt handling Finn Thain
2016-01-03 5:05 ` [PATCH v4 40/78] ncr5380: Introduce NCR5380_poll_politely2 Finn Thain
2016-01-03 5:05 ` [PATCH v4 41/78] ncr5380: Replace redundant flags with FLAG_NO_DMA_FIXUP Finn Thain
2016-01-03 5:05 ` [PATCH v4 42/78] ncr5380: Replace READ_OVERRUNS macro with FLAG_NO_DMA_FIXUPS Finn Thain
2016-01-03 5:05 ` [PATCH v4 43/78] ncr5380: Standardize reselection handling Finn Thain
2016-01-03 5:05 ` [PATCH v4 44/78] ncr5380: Fix off-by-one bug in extended_msg[] bounds check Finn Thain
2016-01-03 5:05 ` [PATCH v4 45/78] ncr5380: Cleanup #include directives Finn Thain
2016-01-03 5:05 ` [PATCH v4 46/78] ncr5380: Fix NDEBUG_NO_DATAOUT flag Finn Thain
2016-01-03 5:05 ` [PATCH v4 47/78] ncr5380: Fix and cleanup scsi_host_template initializers Finn Thain
2016-01-03 5:05 ` [PATCH v4 48/78] atari_NCR5380: Fix queue_size limit Finn Thain
2016-01-03 5:05 ` [PATCH v4 49/78] ncr5380: Remove redundant ICR_ARBITRATION_LOST test and eliminate FLAG_DTC3181E Finn Thain
2016-01-03 5:05 ` [PATCH v4 50/78] ncr5380: Change instance->host_lock to hostdata->lock Finn Thain
2016-01-03 5:05 ` [PATCH v4 51/78] ncr5380: Remove command list debug code Finn Thain
2016-01-03 5:05 ` [PATCH v4 52/78] ncr5380: Remove H_NO macro and introduce dsprintk Finn Thain
2016-01-03 5:05 ` [PATCH v4 53/78] ncr5380: Use shost_priv helper Finn Thain
2016-01-03 5:05 ` [PATCH v4 54/78] ncr5380: Use dsprintk() for queue debugging Finn Thain
2016-01-03 5:05 ` [PATCH v4 55/78] ncr5380: Remove LIST and REMOVE macros Finn Thain
2016-01-03 5:05 ` [PATCH v4 56/78] ncr5380: Remove redundant volatile qualifiers Finn Thain
2016-01-03 5:05 ` [PATCH v4 57/78] ncr5380: Use standard list data structure Finn Thain
2016-01-03 5:05 ` [PATCH v4 58/78] ncr5380: Refactor command completion Finn Thain
2016-01-03 5:06 ` [PATCH v4 59/78] ncr5380: Fix autosense bugs Finn Thain
2016-01-03 5:06 ` [PATCH v4 60/78] ncr5380: Implement new eh_abort_handler Finn Thain
2016-01-03 5:06 ` [PATCH v4 61/78] ncr5380: Fix EH during arbitration and selection Finn Thain
2016-01-03 5:06 ` Finn Thain [this message]
2016-01-03 5:06 ` [PATCH v4 63/78] atari_NCR5380: Remove HOSTNO macro from printk() and seq_printf() calls Finn Thain
2016-01-03 5:06 ` [PATCH v4 64/78] atari_NCR5380: Eliminate HOSTNO macro Finn Thain
2016-01-03 5:06 ` [PATCH v4 65/78] atari_scsi, sun3_scsi: Remove global Scsi_Host pointer Finn Thain
2016-01-03 5:06 ` [PATCH v4 66/78] ncr5380: Fix soft lockups Finn Thain
2016-01-03 5:06 ` [PATCH v4 67/78] ncr5380: Cleanup comments Finn Thain
2016-01-03 5:06 ` [PATCH v4 68/78] ncr5380: Fix trailing whitespace using regexp Finn Thain
2016-01-03 5:06 ` [PATCH v4 69/78] ncr5380: Fix whitespace in comments " Finn Thain
2016-01-03 7:54 ` Joe Perches
2016-01-03 8:17 ` Finn Thain
2016-01-03 14:10 ` One Thousand Gnomes
2016-01-03 18:20 ` Joe Perches
2016-01-03 21:29 ` One Thousand Gnomes
2016-01-03 21:46 ` Joe Perches
[not found] ` <20160103220505.7734a879@lxorguk.ukuu.org.uk>
2016-01-03 22:13 ` Joe Perches
2016-01-03 5:06 ` [PATCH v4 70/78] ncr5380: Merge changes from atari_NCR5380.c Finn Thain
2016-01-03 5:06 ` [PATCH v4 71/78] atari_NCR5380: Merge changes from NCR5380.c Finn Thain
2016-01-03 5:06 ` [PATCH v4 72/78] ncr5380: Cleanup whitespace and parentheses Finn Thain
2016-01-03 5:06 ` [PATCH v4 73/78] ncr5380: Fix pseudo DMA transfers on 53C400 Finn Thain
2016-01-03 5:06 ` [PATCH v4 74/78] ncr5380: Use runtime register mapping Finn Thain
2016-01-03 5:06 ` [PATCH v4 75/78] ncr5380: Enable PDMA for NCR53C400A Finn Thain
2016-01-03 5:06 ` [PATCH v4 76/78] ncr5380: Enable PDMA for DTC chips Finn Thain
2016-01-03 5:06 ` [PATCH v4 77/78] ncr5380: Fix wait for 53C80 registers registers after PDMA Finn Thain
2016-01-03 5:06 ` [PATCH v4 78/78] ncr5380: Add support for HP C2502 Finn Thain
2016-01-07 2:53 ` [PATCH v4 00/78] More fixes, cleanup and modernization for NCR5380 drivers Martin K. Petersen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160103050517.441803011@telegraphics.com.au \
--to=fthain@telegraphics.com.au \
--cc=JBottomley@odin.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-m68k@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
--cc=schmitzmic@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).