From: Finn Thain <fthain@telegraphics.com.au>
To: "James E.J. Bottomley" <JBottomley@odin.com>,
"Martin K. Petersen" <martin.petersen@oracle.com>,
Michael Schmitz <schmitzmic@gmail.com>,
linux-m68k@vger.kernel.org, linux-scsi@vger.kernel.org,
linux-kernel@vger.kernel.org
Cc: Ondrej Zary <linux@rainbow-software.org>
Subject: [PATCH v4 74/78] ncr5380: Use runtime register mapping
Date: Sun, 03 Jan 2016 16:06:15 +1100 [thread overview]
Message-ID: <20160103050522.561796482@telegraphics.com.au> (raw)
In-Reply-To: 20160103050501.042035135@telegraphics.com.au
[-- Attachment #1: 73-71 --]
[-- Type: text/plain, Size: 10242 bytes --]
From: Ondrej Zary <linux@rainbow-software.org>
Convert compile-time C400_ register mapping to runtime mapping.
This removes the weird negative register offsets and allows adding
additional mappings.
While at it, convert read/write loops into insb/outsb.
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Reviewed-by: Hannes Reinecke <hare@suse.com>
---
drivers/scsi/NCR5380.h | 13 ------
drivers/scsi/g_NCR5380.c | 88 +++++++++++++++++++++--------------------------
drivers/scsi/g_NCR5380.h | 12 ++++--
3 files changed, 49 insertions(+), 64 deletions(-)
Index: linux/drivers/scsi/NCR5380.h
===================================================================
--- linux.orig/drivers/scsi/NCR5380.h 2016-01-03 16:04:30.000000000 +1100
+++ linux/drivers/scsi/NCR5380.h 2016-01-03 16:04:51.000000000 +1100
@@ -163,8 +163,7 @@
/* Write any value to this register to start an ini mode DMA receive */
#define START_DMA_INITIATOR_RECEIVE_REG 7 /* wo */
-#define C400_CONTROL_STATUS_REG NCR53C400_register_offset-8 /* rw */
-
+/* NCR 53C400(A) Control Status Register bits: */
#define CSR_RESET 0x80 /* wo Resets 53c400 */
#define CSR_53C80_REG 0x80 /* ro 5380 registers busy */
#define CSR_TRANS_DIR 0x40 /* rw Data transfer direction */
@@ -181,16 +180,6 @@
#define CSR_BASE CSR_53C80_INTR
#endif
-/* Number of 128-byte blocks to be transferred */
-#define C400_BLOCK_COUNTER_REG NCR53C400_register_offset-7 /* rw */
-
-/* Resume transfer after disconnect */
-#define C400_RESUME_TRANSFER_REG NCR53C400_register_offset-6 /* wo */
-
-/* Access to host buffer stack */
-#define C400_HOST_BUFFER NCR53C400_register_offset-4 /* rw */
-
-
/* Note : PHASE_* macros are based on the values of the STATUS register */
#define PHASE_MASK (SR_MSG | SR_CD | SR_IO)
Index: linux/drivers/scsi/g_NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/g_NCR5380.c 2016-01-03 16:04:50.000000000 +1100
+++ linux/drivers/scsi/g_NCR5380.c 2016-01-03 16:04:51.000000000 +1100
@@ -253,6 +253,7 @@ static int __init generic_NCR5380_detect
};
int flags;
struct Scsi_Host *instance;
+ struct NCR5380_hostdata *hostdata;
#ifdef SCSI_G_NCR5380_MEM
unsigned long base;
void __iomem *iomem;
@@ -394,6 +395,7 @@ static int __init generic_NCR5380_detect
instance = scsi_register(tpnt, sizeof(struct NCR5380_hostdata));
if (instance == NULL)
goto out_release;
+ hostdata = shost_priv(instance);
#ifndef SCSI_G_NCR5380_MEM
instance->io_port = overrides[current_override].NCR5380_map_name;
@@ -403,18 +405,27 @@ static int __init generic_NCR5380_detect
* On NCR53C400 boards, NCR5380 registers are mapped 8 past
* the base address.
*/
- if (overrides[current_override].board == BOARD_NCR53C400)
+ if (overrides[current_override].board == BOARD_NCR53C400) {
instance->io_port += 8;
+ hostdata->c400_ctl_status = 0;
+ hostdata->c400_blk_cnt = 1;
+ hostdata->c400_host_buf = 4;
+ }
#else
instance->base = overrides[current_override].NCR5380_map_name;
- ((struct NCR5380_hostdata *)instance->hostdata)->iomem = iomem;
+ hostdata->iomem = iomem;
+ if (overrides[current_override].board == BOARD_NCR53C400) {
+ hostdata->c400_ctl_status = 0x100;
+ hostdata->c400_blk_cnt = 0x101;
+ hostdata->c400_host_buf = 0x104;
+ }
#endif
if (NCR5380_init(instance, flags))
goto out_unregister;
if (overrides[current_override].board == BOARD_NCR53C400)
- NCR5380_write(C400_CONTROL_STATUS_REG, CSR_BASE);
+ NCR5380_write(hostdata->c400_ctl_status, CSR_BASE);
NCR5380_maybe_reset_bus(instance);
@@ -522,31 +533,25 @@ generic_NCR5380_biosparam(struct scsi_de
static inline int NCR5380_pread(struct Scsi_Host *instance, unsigned char *dst, int len)
{
-#ifdef SCSI_G_NCR5380_MEM
struct NCR5380_hostdata *hostdata = shost_priv(instance);
-#endif
int blocks = len / 128;
int start = 0;
- int bl;
- NCR5380_write(C400_CONTROL_STATUS_REG, CSR_BASE | CSR_TRANS_DIR);
- NCR5380_write(C400_BLOCK_COUNTER_REG, blocks);
+ NCR5380_write(hostdata->c400_ctl_status, CSR_BASE | CSR_TRANS_DIR);
+ NCR5380_write(hostdata->c400_blk_cnt, blocks);
while (1) {
- if ((bl = NCR5380_read(C400_BLOCK_COUNTER_REG)) == 0) {
+ if (NCR5380_read(hostdata->c400_blk_cnt) == 0)
break;
- }
- if (NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_GATED_53C80_IRQ) {
+ if (NCR5380_read(hostdata->c400_ctl_status) & CSR_GATED_53C80_IRQ) {
printk(KERN_ERR "53C400r: Got 53C80_IRQ start=%d, blocks=%d\n", start, blocks);
return -1;
}
- while (NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_HOST_BUF_NOT_RDY);
+ while (NCR5380_read(hostdata->c400_ctl_status) & CSR_HOST_BUF_NOT_RDY)
+ ; /* FIXME - no timeout */
#ifndef SCSI_G_NCR5380_MEM
- {
- int i;
- for (i = 0; i < 128; i++)
- dst[start + i] = NCR5380_read(C400_HOST_BUFFER);
- }
+ insb(instance->io_port + hostdata->c400_host_buf,
+ dst + start, 128);
#else
/* implies SCSI_G_NCR5380_MEM */
memcpy_fromio(dst + start,
@@ -557,17 +562,12 @@ static inline int NCR5380_pread(struct S
}
if (blocks) {
- while (NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_HOST_BUF_NOT_RDY)
- {
- // FIXME - no timeout
- }
+ while (NCR5380_read(hostdata->c400_ctl_status) & CSR_HOST_BUF_NOT_RDY)
+ ; /* FIXME - no timeout */
#ifndef SCSI_G_NCR5380_MEM
- {
- int i;
- for (i = 0; i < 128; i++)
- dst[start + i] = NCR5380_read(C400_HOST_BUFFER);
- }
+ insb(instance->io_port + hostdata->c400_host_buf,
+ dst + start, 128);
#else
/* implies SCSI_G_NCR5380_MEM */
memcpy_fromio(dst + start,
@@ -577,7 +577,7 @@ static inline int NCR5380_pread(struct S
blocks--;
}
- if (!(NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_GATED_53C80_IRQ))
+ if (!(NCR5380_read(hostdata->c400_ctl_status) & CSR_GATED_53C80_IRQ))
printk("53C400r: no 53C80 gated irq after transfer");
#if 0
@@ -585,7 +585,7 @@ static inline int NCR5380_pread(struct S
* DON'T DO THIS - THEY NEVER ARRIVE!
*/
printk("53C400r: Waiting for 53C80 registers\n");
- while (NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_53C80_REG)
+ while (NCR5380_read(hostdata->c400_ctl_status) & CSR_53C80_REG)
;
#endif
if (!(NCR5380_read(BUS_AND_STATUS_REG) & BASR_END_DMA_TRANSFER))
@@ -606,32 +606,26 @@ static inline int NCR5380_pread(struct S
static inline int NCR5380_pwrite(struct Scsi_Host *instance, unsigned char *src, int len)
{
-#ifdef SCSI_G_NCR5380_MEM
struct NCR5380_hostdata *hostdata = shost_priv(instance);
-#endif
int blocks = len / 128;
int start = 0;
- int bl;
int i;
- NCR5380_write(C400_CONTROL_STATUS_REG, CSR_BASE);
- NCR5380_write(C400_BLOCK_COUNTER_REG, blocks);
+ NCR5380_write(hostdata->c400_ctl_status, CSR_BASE);
+ NCR5380_write(hostdata->c400_blk_cnt, blocks);
while (1) {
- if (NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_GATED_53C80_IRQ) {
+ if (NCR5380_read(hostdata->c400_ctl_status) & CSR_GATED_53C80_IRQ) {
printk(KERN_ERR "53C400w: Got 53C80_IRQ start=%d, blocks=%d\n", start, blocks);
return -1;
}
- if ((bl = NCR5380_read(C400_BLOCK_COUNTER_REG)) == 0) {
+ if (NCR5380_read(hostdata->c400_blk_cnt) == 0)
break;
- }
- while (NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_HOST_BUF_NOT_RDY)
+ while (NCR5380_read(hostdata->c400_ctl_status) & CSR_HOST_BUF_NOT_RDY)
; // FIXME - timeout
#ifndef SCSI_G_NCR5380_MEM
- {
- for (i = 0; i < 128; i++)
- NCR5380_write(C400_HOST_BUFFER, src[start + i]);
- }
+ outsb(instance->io_port + hostdata->c400_host_buf,
+ src + start, 128);
#else
/* implies SCSI_G_NCR5380_MEM */
memcpy_toio(hostdata->iomem + NCR53C400_host_buffer,
@@ -641,14 +635,12 @@ static inline int NCR5380_pwrite(struct
blocks--;
}
if (blocks) {
- while (NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_HOST_BUF_NOT_RDY)
+ while (NCR5380_read(hostdata->c400_ctl_status) & CSR_HOST_BUF_NOT_RDY)
; // FIXME - no timeout
#ifndef SCSI_G_NCR5380_MEM
- {
- for (i = 0; i < 128; i++)
- NCR5380_write(C400_HOST_BUFFER, src[start + i]);
- }
+ outsb(instance->io_port + hostdata->c400_host_buf,
+ src + start, 128);
#else
/* implies SCSI_G_NCR5380_MEM */
memcpy_toio(hostdata->iomem + NCR53C400_host_buffer,
@@ -660,7 +652,7 @@ static inline int NCR5380_pwrite(struct
#if 0
printk("53C400w: waiting for registers to be available\n");
- THEY NEVER DO ! while (NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_53C80_REG);
+ THEY NEVER DO ! while (NCR5380_read(hostdata->c400_ctl_status) & CSR_53C80_REG);
printk("53C400w: Got em\n");
#endif
@@ -668,7 +660,7 @@ static inline int NCR5380_pwrite(struct
/* All documentation says to check for this. Maybe my hardware is too
* fast. Waiting for it seems to work fine! KLL
*/
- while (!(i = NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_GATED_53C80_IRQ))
+ while (!(i = NCR5380_read(hostdata->c400_ctl_status) & CSR_GATED_53C80_IRQ))
; // FIXME - no timeout
/*
Index: linux/drivers/scsi/g_NCR5380.h
===================================================================
--- linux.orig/drivers/scsi/g_NCR5380.h 2016-01-03 16:04:03.000000000 +1100
+++ linux/drivers/scsi/g_NCR5380.h 2016-01-03 16:04:51.000000000 +1100
@@ -29,7 +29,6 @@
#define NCR5380_map_type int
#define NCR5380_map_name port
-#define NCR53C400_register_offset 0
#ifdef CONFIG_SCSI_GENERIC_NCR53C400
#define NCR5380_region_size 16
@@ -42,7 +41,10 @@
#define NCR5380_write(reg, value) \
outb(value, instance->io_port + (reg))
-#define NCR5380_implementation_fields /* none */
+#define NCR5380_implementation_fields \
+ int c400_ctl_status; \
+ int c400_blk_cnt; \
+ int c400_host_buf;
#else
/* therefore SCSI_G_NCR5380_MEM */
@@ -50,7 +52,6 @@
#define NCR5380_map_type unsigned long
#define NCR5380_map_name base
-#define NCR53C400_register_offset 0x108
#define NCR53C400_mem_base 0x3880
#define NCR53C400_host_buffer 0x3900
#define NCR5380_region_size 0x3a00
@@ -63,7 +64,10 @@
NCR53C400_mem_base + (reg))
#define NCR5380_implementation_fields \
- void __iomem *iomem;
+ void __iomem *iomem; \
+ int c400_ctl_status; \
+ int c400_blk_cnt; \
+ int c400_host_buf;
#endif
next prev parent reply other threads:[~2016-01-03 5:06 UTC|newest]
Thread overview: 94+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-01-03 5:05 [PATCH v4 00/78] More fixes, cleanup and modernization for NCR5380 drivers Finn Thain
2016-01-03 5:05 ` [PATCH v4 01/78] atari_scsi: Fix SCSI host ID setting Finn Thain
2016-01-03 5:05 ` [PATCH v4 02/78] ncr5380: Remove redundant static variable initializers Finn Thain
2016-01-03 5:05 ` [PATCH v4 03/78] ncr5380: Eliminate PDEBUG*, TDEBUG* and DTCDEBUG* macros Finn Thain
2016-01-03 5:05 ` [PATCH v4 04/78] ncr5380: Remove more pointless macros Finn Thain
2016-01-03 5:05 ` [PATCH v4 05/78] ncr5380: Remove NCR5380_local_declare and NCR5380_setup macros Finn Thain
2016-01-03 5:05 ` [PATCH v4 06/78] ncr5380: Remove NCR5380_instance_name macro Finn Thain
2016-01-03 5:05 ` [PATCH v4 07/78] ncr5380: Split NCR5380_init() into two functions Finn Thain
2016-01-03 5:05 ` [PATCH v4 08/78] ncr5380: Move NCR53C400-specific code Finn Thain
2016-01-03 5:05 ` [PATCH v4 09/78] atari_NCR5380: Reset bus on driver initialization if required Finn Thain
2016-01-03 5:05 ` [PATCH v4 10/78] atari_NCR5380: Remove RESET_BOOT, CONFIG_ATARI_SCSI_TOSHIBA_DELAY and CONFIG_ATARI_SCSI_RESET_BOOT Finn Thain
2016-01-03 5:05 ` [PATCH v4 11/78] ncr5380: Simplify bus reset handlers Finn Thain
2016-01-03 5:05 ` [PATCH v4 12/78] ncr5380: Remove unused hostdata->aborted flag Finn Thain
2016-01-03 5:05 ` [PATCH v4 13/78] ncr5380: Remove redundant register writes Finn Thain
2016-01-03 5:05 ` [PATCH v4 14/78] ncr5380: Use return instead of goto in NCR5380_select() Finn Thain
2016-01-03 5:05 ` [PATCH v4 15/78] ncr5380: Always escalate bad target time-out " Finn Thain
2016-01-03 5:05 ` [PATCH v4 16/78] ncr5380: Proceed with next command after NCR5380_select() calls scsi_done Finn Thain
2016-01-03 5:05 ` [PATCH v4 17/78] ncr5380: Keep BSY asserted when entering SELECTION phase Finn Thain
2016-01-03 5:05 ` [PATCH v4 18/78] ncr5380: Eliminate USLEEP_WAITLONG delay Finn Thain
2016-01-03 5:05 ` [PATCH v4 19/78] ncr5380: Cleanup bogus {request, release}_region() calls Finn Thain
2016-01-03 5:05 ` [PATCH v4 20/78] ncr5380: Introduce unbound workqueue Finn Thain
2016-01-03 5:05 ` [PATCH v4 21/78] ncr5380: Sleep when polling, if possible Finn Thain
2016-01-03 5:05 ` [PATCH v4 22/78] ncr5380: Eliminate selecting state Finn Thain
2016-01-03 5:05 ` [PATCH v4 23/78] ncr5380: Always retry arbitration and selection Finn Thain
2016-01-03 5:05 ` [PATCH v4 24/78] ncr5380: Implement NCR5380_dma_xfer_len and remove LIMIT_TRANSFERSIZE macro Finn Thain
2016-01-03 5:05 ` [PATCH v4 25/78] ncr5380: Rework disconnect versus poll logic Finn Thain
2016-01-03 5:05 ` [PATCH v4 26/78] ncr5380: Fix NCR5380_transfer_pio() result Finn Thain
2016-01-03 5:05 ` [PATCH v4 27/78] ncr5380: Add missing lock in eh_abort_handler Finn Thain
2016-01-03 5:05 ` [PATCH v4 28/78] ncr5380: Drop DEF_SCSI_QCMD macro Finn Thain
2016-01-03 5:05 ` [PATCH v4 29/78] ncr5380: Remove references to linked commands Finn Thain
2016-01-03 5:05 ` [PATCH v4 30/78] ncr5380: Add missing break after case MESSAGE_REJECT Finn Thain
2016-01-03 5:05 ` [PATCH v4 31/78] ncr5380: Fix !REQ timeout in do_abort() Finn Thain
2016-01-03 5:05 ` [PATCH v4 32/78] ncr5380: Fix bus phase " Finn Thain
2016-01-03 5:05 ` [PATCH v4 33/78] atari_NCR5380: Set do_abort() timeouts Finn Thain
2016-01-03 5:05 ` [PATCH v4 34/78] atari_NCR5380: Use arbitration timeout Finn Thain
2016-01-24 10:38 ` Geert Uytterhoeven
2016-01-25 2:45 ` Finn Thain
2016-01-25 8:05 ` Geert Uytterhoeven
2016-01-25 18:28 ` Andreas Schwab
2016-01-25 19:56 ` Michael Schmitz
2016-01-26 0:18 ` Finn Thain
2016-01-26 11:13 ` Geert Uytterhoeven
2016-01-03 5:05 ` [PATCH v4 35/78] ncr5380: Dont wait for BUS FREE after disconnect Finn Thain
2016-01-03 5:05 ` [PATCH v4 36/78] ncr5380: Use work_struct instead of delayed_work Finn Thain
2016-01-03 5:05 ` [PATCH v4 37/78] ncr5380: Standardize work queueing algorithm Finn Thain
2016-01-03 5:05 ` [PATCH v4 38/78] ncr5380: Remove UNSAFE macro Finn Thain
2016-01-03 5:05 ` [PATCH v4 39/78] ncr5380: Standardize interrupt handling Finn Thain
2016-01-03 5:05 ` [PATCH v4 40/78] ncr5380: Introduce NCR5380_poll_politely2 Finn Thain
2016-01-03 5:05 ` [PATCH v4 41/78] ncr5380: Replace redundant flags with FLAG_NO_DMA_FIXUP Finn Thain
2016-01-03 5:05 ` [PATCH v4 42/78] ncr5380: Replace READ_OVERRUNS macro with FLAG_NO_DMA_FIXUPS Finn Thain
2016-01-03 5:05 ` [PATCH v4 43/78] ncr5380: Standardize reselection handling Finn Thain
2016-01-03 5:05 ` [PATCH v4 44/78] ncr5380: Fix off-by-one bug in extended_msg[] bounds check Finn Thain
2016-01-03 5:05 ` [PATCH v4 45/78] ncr5380: Cleanup #include directives Finn Thain
2016-01-03 5:05 ` [PATCH v4 46/78] ncr5380: Fix NDEBUG_NO_DATAOUT flag Finn Thain
2016-01-03 5:05 ` [PATCH v4 47/78] ncr5380: Fix and cleanup scsi_host_template initializers Finn Thain
2016-01-03 5:05 ` [PATCH v4 48/78] atari_NCR5380: Fix queue_size limit Finn Thain
2016-01-03 5:05 ` [PATCH v4 49/78] ncr5380: Remove redundant ICR_ARBITRATION_LOST test and eliminate FLAG_DTC3181E Finn Thain
2016-01-03 5:05 ` [PATCH v4 50/78] ncr5380: Change instance->host_lock to hostdata->lock Finn Thain
2016-01-03 5:05 ` [PATCH v4 51/78] ncr5380: Remove command list debug code Finn Thain
2016-01-03 5:05 ` [PATCH v4 52/78] ncr5380: Remove H_NO macro and introduce dsprintk Finn Thain
2016-01-03 5:05 ` [PATCH v4 53/78] ncr5380: Use shost_priv helper Finn Thain
2016-01-03 5:05 ` [PATCH v4 54/78] ncr5380: Use dsprintk() for queue debugging Finn Thain
2016-01-03 5:05 ` [PATCH v4 55/78] ncr5380: Remove LIST and REMOVE macros Finn Thain
2016-01-03 5:05 ` [PATCH v4 56/78] ncr5380: Remove redundant volatile qualifiers Finn Thain
2016-01-03 5:05 ` [PATCH v4 57/78] ncr5380: Use standard list data structure Finn Thain
2016-01-03 5:05 ` [PATCH v4 58/78] ncr5380: Refactor command completion Finn Thain
2016-01-03 5:06 ` [PATCH v4 59/78] ncr5380: Fix autosense bugs Finn Thain
2016-01-03 5:06 ` [PATCH v4 60/78] ncr5380: Implement new eh_abort_handler Finn Thain
2016-01-03 5:06 ` [PATCH v4 61/78] ncr5380: Fix EH during arbitration and selection Finn Thain
2016-01-03 5:06 ` [PATCH v4 62/78] ncr5380: Implement new eh_bus_reset_handler Finn Thain
2016-01-03 5:06 ` [PATCH v4 63/78] atari_NCR5380: Remove HOSTNO macro from printk() and seq_printf() calls Finn Thain
2016-01-03 5:06 ` [PATCH v4 64/78] atari_NCR5380: Eliminate HOSTNO macro Finn Thain
2016-01-03 5:06 ` [PATCH v4 65/78] atari_scsi, sun3_scsi: Remove global Scsi_Host pointer Finn Thain
2016-01-03 5:06 ` [PATCH v4 66/78] ncr5380: Fix soft lockups Finn Thain
2016-01-03 5:06 ` [PATCH v4 67/78] ncr5380: Cleanup comments Finn Thain
2016-01-03 5:06 ` [PATCH v4 68/78] ncr5380: Fix trailing whitespace using regexp Finn Thain
2016-01-03 5:06 ` [PATCH v4 69/78] ncr5380: Fix whitespace in comments " Finn Thain
2016-01-03 7:54 ` Joe Perches
2016-01-03 8:17 ` Finn Thain
2016-01-03 14:10 ` One Thousand Gnomes
2016-01-03 18:20 ` Joe Perches
2016-01-03 21:29 ` One Thousand Gnomes
2016-01-03 21:46 ` Joe Perches
[not found] ` <20160103220505.7734a879@lxorguk.ukuu.org.uk>
2016-01-03 22:13 ` Joe Perches
2016-01-03 5:06 ` [PATCH v4 70/78] ncr5380: Merge changes from atari_NCR5380.c Finn Thain
2016-01-03 5:06 ` [PATCH v4 71/78] atari_NCR5380: Merge changes from NCR5380.c Finn Thain
2016-01-03 5:06 ` [PATCH v4 72/78] ncr5380: Cleanup whitespace and parentheses Finn Thain
2016-01-03 5:06 ` [PATCH v4 73/78] ncr5380: Fix pseudo DMA transfers on 53C400 Finn Thain
2016-01-03 5:06 ` Finn Thain [this message]
2016-01-03 5:06 ` [PATCH v4 75/78] ncr5380: Enable PDMA for NCR53C400A Finn Thain
2016-01-03 5:06 ` [PATCH v4 76/78] ncr5380: Enable PDMA for DTC chips Finn Thain
2016-01-03 5:06 ` [PATCH v4 77/78] ncr5380: Fix wait for 53C80 registers registers after PDMA Finn Thain
2016-01-03 5:06 ` [PATCH v4 78/78] ncr5380: Add support for HP C2502 Finn Thain
2016-01-07 2:53 ` [PATCH v4 00/78] More fixes, cleanup and modernization for NCR5380 drivers Martin K. Petersen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160103050522.561796482@telegraphics.com.au \
--to=fthain@telegraphics.com.au \
--cc=JBottomley@odin.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-m68k@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=linux@rainbow-software.org \
--cc=martin.petersen@oracle.com \
--cc=schmitzmic@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).