From: Emmanuel Florac <eflorac@intellique.com>
To: Kai Makisara <Kai.Makisara@kolumbus.fi>
Cc: "Seymour, Shane M" <shane.seymour@hpe.com>,
Laurence Oberman <loberman@redhat.com>,
Laurence Oberman <oberman.l@gmail.com>,
"linux-scsi@vger.kernel.org" <linux-scsi@vger.kernel.org>
Subject: Re: What partition should the MTMKPART argument specify? Was: Re: st driver doesn't seem to grok LTO partitioning
Date: Mon, 25 Jan 2016 11:21:30 +0100 [thread overview]
Message-ID: <20160125112130.1350643c@harpe.intellique.com> (raw)
In-Reply-To: <alpine.LSU.2.11.1601242247440.3145@xnv.znxvfnen.cevingr>
Le Sun, 24 Jan 2016 23:05:17 +0200 (EET)
Kai Makisara <Kai.Makisara@kolumbus.fi> écrivait:
> Below is a test patch that implements the current behaviour with
> non-negative argument (but works with LTOs etc.) and makes partition
> zero size absolute value of argument (MB) if argument is negative. If
> you want to test the patch, note that the current mt-st does not
> accept negative numbers. A minimal patch is needed.
OK I'm going to try this one.
--
------------------------------------------------------------------------
Emmanuel Florac | Direction technique
| Intellique
| <eflorac@intellique.com>
| +33 1 78 94 84 02
------------------------------------------------------------------------
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2016-01-25 10:21 UTC|newest]
Thread overview: 73+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20151218170644.24167419@harpe.intellique.com>
2015-12-21 12:46 ` st driver doesn't seem to grok LTO partitioning Emmanuel Florac
2015-12-21 17:25 ` "Kai Mäkisara (Kolumbus)"
[not found] ` <20151221185759.38dd21d6@harpe.intellique.com>
2015-12-21 18:57 ` "Kai Mäkisara (Kolumbus)"
2015-12-22 5:51 ` Seymour, Shane M
2015-12-22 9:59 ` Emmanuel Florac
[not found] ` <CAAzz28i5=oz_BmcoEC2ApLN9zj_F4aDmGkCXkXaS48HR_Ockew@mail.gmail.com>
2015-12-22 10:04 ` Emmanuel Florac
2015-12-22 10:31 ` Laurence Oberman
2015-12-25 15:53 ` Kai Makisara
2015-12-25 17:47 ` Emmanuel Florac
2015-12-29 16:14 ` Emmanuel Florac
2015-12-29 16:58 ` Emmanuel Florac
2015-12-29 17:46 ` "Kai Mäkisara (Kolumbus)"
2015-12-29 17:58 ` Emmanuel Florac
[not found] ` <20151229191347.2e0e5f0e@harpe.intellique.com>
2015-12-30 17:54 ` Kai Makisara
2015-12-30 18:33 ` Emmanuel Florac
2015-12-30 19:21 ` "Kai Mäkisara (Kolumbus)"
2015-12-30 21:24 ` Emmanuel Florac
2015-12-31 16:08 ` "Kai Mäkisara (Kolumbus)"
2016-01-04 10:22 ` Kai Makisara
2016-01-04 10:54 ` Emmanuel Florac
2016-01-04 11:05 ` Emmanuel Florac
2016-01-04 11:46 ` Emmanuel Florac
[not found] ` <CAAzz28gW69rB-6h2fwxtwnTj5h7HZcn2qkJdx2GTgu3Y8SDNqQ@mail.gmail.com>
2016-01-04 15:32 ` Emmanuel Florac
[not found] ` <CAAzz28iCoG-rjnL7EsjHXA7UtRJSCEXuwL3+27ZBo7fckcBAfg@mail.gmail.com>
2016-01-05 21:55 ` Laurence Oberman
2016-01-06 15:10 ` Emmanuel Florac
2016-01-06 15:23 ` Laurence Oberman
2016-01-06 15:25 ` Laurence Oberman
2016-01-06 15:32 ` Laurence Oberman
2016-01-06 15:48 ` Douglas Gilbert
2016-01-06 15:54 ` Laurence Oberman
2016-01-06 16:07 ` Emmanuel Florac
2016-01-14 20:12 ` Laurence Oberman
2016-01-15 0:21 ` Seymour, Shane M
2016-01-21 20:58 ` What partition should the MTMKPART argument specify? Was: " "Kai Mäkisara (Kolumbus)"
2016-01-21 22:06 ` Laurence Oberman
2016-01-22 2:10 ` Seymour, Shane M
2016-01-22 3:31 ` Seymour, Shane M
2016-01-22 11:24 ` Emmanuel Florac
2016-01-22 11:50 ` Emmanuel Florac
2016-01-26 23:35 ` Seymour, Shane M
2016-01-28 17:31 ` "Kai Mäkisara (Kolumbus)"
2016-01-28 17:39 ` Emmanuel Florac
2016-01-24 21:05 ` Kai Makisara
2016-01-25 10:21 ` Emmanuel Florac [this message]
2016-01-28 7:36 ` Seymour, Shane M
2016-01-28 17:04 ` "Kai Mäkisara (Kolumbus)"
2016-01-28 19:21 ` Laurence Oberman
2016-01-28 19:56 ` "Kai Mäkisara (Kolumbus)"
2016-01-28 23:12 ` Seymour, Shane M
2016-01-28 23:23 ` Laurence Oberman
2016-01-28 23:25 ` Laurence Oberman
2016-01-29 0:54 ` Seymour, Shane M
2016-01-29 17:22 ` Kai Makisara
2016-02-01 6:31 ` Seymour, Shane M
2016-02-01 18:43 ` "Kai Mäkisara (Kolumbus)"
2016-02-01 19:02 ` Laurence Oberman
2016-02-01 22:59 ` Seymour, Shane M
2016-02-03 3:40 ` Laurence Oberman
2016-02-03 2:18 ` Seymour, Shane M
2016-02-03 18:36 ` Kai Makisara
2016-02-04 1:43 ` Seymour, Shane M
2016-02-04 17:54 ` "Kai Mäkisara (Kolumbus)"
2016-02-04 18:09 ` Douglas Gilbert
2016-02-04 19:25 ` Laurence Oberman
2016-02-04 18:12 ` Emmanuel Florac
2016-01-15 11:48 ` Emmanuel Florac
2016-01-22 10:17 ` Douglas Gilbert
2016-01-06 16:10 ` Emmanuel Florac
2016-01-06 16:16 ` Emmanuel Florac
2016-01-06 16:44 ` Emmanuel Florac
2015-12-29 16:59 ` Emmanuel Florac
2015-12-29 17:18 ` "Kai Mäkisara (Kolumbus)"
[not found] ` <CAAzz28gn2zwC5ZUTtPupDOTHekGspWh0vnWHV+jvbx52c=cq2Q@mail.gmail.com>
2015-12-21 17:49 ` Emmanuel Florac
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160125112130.1350643c@harpe.intellique.com \
--to=eflorac@intellique.com \
--cc=Kai.Makisara@kolumbus.fi \
--cc=linux-scsi@vger.kernel.org \
--cc=loberman@redhat.com \
--cc=oberman.l@gmail.com \
--cc=shane.seymour@hpe.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).