From: Mike Snitzer <snitzer@redhat.com>
To: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: device-mapper development <dm-devel@redhat.com>,
"linux-scsi@vger.kernel.org" <linux-scsi@vger.kernel.org>
Subject: Re: dm-mq and end_clone_request()
Date: Mon, 25 Jul 2016 21:16:07 -0400 [thread overview]
Message-ID: <20160726011607.GA77078@redhat.com> (raw)
In-Reply-To: <1490356d-2c0e-d94a-7a88-5e8bc89953ef@sandisk.com>
On Mon, Jul 25 2016 at 6:00P -0400,
Bart Van Assche <bart.vanassche@sandisk.com> wrote:
> On 07/25/2016 02:23 PM, Mike Snitzer wrote:
> >So I'd be curious to know if your debugging has enabled you to identify
> >exactly where in the dm-mapth.c code the -EIO return is being
> >established. do_end_io() is the likely candidate -- but again the
> >__must_push_back() check should prevent it and DM_ENDIO_REQUEUE should
> >be returned.
>
> Hello Mike,
>
> Thanks for looking further into this. The pr_info() statement that I had
> added in the following code block in __multipath_map() fired what told me
> that the following code block triggered the -EIO return:
>
> if (!pgpath) {
> if (!must_push_back(m))
> r = -EIO; /* Failed */
> pr_info("%s(): (a) returning %d\n", __func__, r);
> return r;
> }
>
> From the system log:
>
> kernel: mpath 254:0: queue_if_no_path 1 -> 0
> kernel: __multipath_map(): (a) returning -5
>
> The code that I had added in queue_if_no_path() is as follows:
>
> old = test_bit(MPATHF_QUEUE_IF_NO_PATH, &m->flags);
> [ ... ]
> pr_info("mpath %s: queue_if_no_path %d -> %d\n",
> dm_device_name(dm_table_get_md(m->ti->table)), old,
> queue_if_no_path);
Hi Bart,
Please try this patch to see if it fixes your issue, thanks.
diff --git a/drivers/md/dm-mpath.c b/drivers/md/dm-mpath.c
index 52baf8a..287caa7 100644
--- a/drivers/md/dm-mpath.c
+++ b/drivers/md/dm-mpath.c
@@ -433,10 +433,17 @@ failed:
*/
static int must_push_back(struct multipath *m)
{
- return (test_bit(MPATHF_QUEUE_IF_NO_PATH, &m->flags) ||
- ((test_bit(MPATHF_QUEUE_IF_NO_PATH, &m->flags) !=
- test_bit(MPATHF_SAVED_QUEUE_IF_NO_PATH, &m->flags)) &&
- dm_noflush_suspending(m->ti)));
+ bool r;
+ unsigned long flags;
+
+ spin_lock_irqsave(&m->lock, flags);
+ r = (test_bit(MPATHF_QUEUE_IF_NO_PATH, &m->flags) ||
+ ((test_bit(MPATHF_QUEUE_IF_NO_PATH, &m->flags) !=
+ test_bit(MPATHF_SAVED_QUEUE_IF_NO_PATH, &m->flags)) &&
+ dm_noflush_suspending(m->ti)));
+ spin_unlock_irqrestore(&m->lock, flags);
+
+ return r;
}
/*
next prev parent reply other threads:[~2016-07-26 1:15 UTC|newest]
Thread overview: 66+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <4ed669ed-beae-76a8-b806-a284565b327a@sandisk.com>
2016-07-20 14:08 ` dm-mq and end_clone_request() Mike Snitzer
2016-07-20 14:27 ` Mike Snitzer
2016-07-20 17:37 ` Bart Van Assche
2016-07-20 18:33 ` Mike Snitzer
2016-07-21 20:58 ` [dm-devel] " Bart Van Assche
2016-07-25 17:53 ` Mike Snitzer
2016-07-25 21:23 ` Mike Snitzer
2016-07-25 22:00 ` Bart Van Assche
2016-07-26 1:16 ` Mike Snitzer [this message]
2016-07-26 22:51 ` Bart Van Assche
2016-07-27 14:08 ` Mike Snitzer
2016-07-27 15:52 ` [dm-devel] " Benjamin Marzinski
2016-07-27 19:06 ` Bart Van Assche
2016-07-27 19:54 ` Mike Snitzer
2016-07-27 20:09 ` Mike Snitzer
2016-07-27 23:05 ` Bart Van Assche
2016-07-28 13:33 ` Mike Snitzer
2016-07-28 15:23 ` Bart Van Assche
2016-07-28 15:40 ` Mike Snitzer
2016-07-29 6:28 ` [dm-devel] " Hannes Reinecke
[not found] ` <317679447.7168375.1469729769593.JavaMail.zimbra@redhat.com>
[not found] ` <6880321d-e14f-169b-d100-6e460dd9bd09@sandisk.com>
[not found] ` <1110327939.7305916.1469819453678.JavaMail.zimbra@redhat.com>
[not found] ` <a5c1a149-b1a2-b5a4-2207-bdaf32db3cbd@sandisk.com>
[not found] ` <757522831.7667712.1470059860543.JavaMail.zimbra@redhat.com>
[not found] ` <536022978.7668211.1470060125271.JavaMail.zimbra@redhat.com>
[not found] ` <931235537.7668834.1470060339483.JavaMail.zimbra@redhat.com>
[not found] ` <1264951811.7684268.1470065187014.JavaMail.zimbra@redhat.com>
[not found] ` <17da3ab0-233a-2cec-f921-bfd42c953ccc@sandisk.com>
2016-08-01 17:59 ` Mike Snitzer
2016-08-01 18:55 ` Bart Van Assche
2016-08-01 19:15 ` Mike Snitzer
2016-08-01 20:46 ` Mike Snitzer
2016-08-01 22:41 ` Bart Van Assche
2016-08-02 17:45 ` Mike Snitzer
2016-08-03 0:19 ` Bart Van Assche
2016-08-03 0:40 ` Mike Snitzer
2016-08-03 1:33 ` Laurence Oberman
2016-08-03 2:10 ` Mike Snitzer
2016-08-03 2:18 ` Laurence Oberman
2016-08-03 2:55 ` Laurence Oberman
2016-08-03 15:10 ` Laurence Oberman
2016-08-03 16:06 ` Bart Van Assche
2016-08-03 17:25 ` Laurence Oberman
2016-08-03 18:03 ` [dm-devel] " Laurence Oberman
2016-08-03 16:55 ` Bart Van Assche
2016-08-04 16:10 ` Mike Snitzer
2016-08-04 17:42 ` Bart Van Assche
2016-08-04 23:58 ` Mike Snitzer
2016-08-05 1:07 ` Laurence Oberman
2016-08-05 11:43 ` Laurence Oberman
2016-08-05 15:39 ` Laurence Oberman
2016-08-05 15:43 ` Bart Van Assche
2016-08-05 18:42 ` [dm-devel] " Bart Van Assche
2016-08-06 14:47 ` Laurence Oberman
2016-08-07 22:31 ` [dm-devel] " Bart Van Assche
2016-08-08 12:45 ` Laurence Oberman
2016-08-08 13:44 ` Johannes Thumshirn
2016-08-08 14:32 ` Laurence Oberman
2016-08-08 14:54 ` Bart Van Assche
2016-08-08 15:11 ` Bart Van Assche
2016-08-08 15:26 ` Laurence Oberman
2016-08-08 15:28 ` Bart Van Assche
2016-08-08 22:39 ` Bart Van Assche
2016-08-08 22:52 ` Laurence Oberman
2016-08-09 0:09 ` Laurence Oberman
2016-08-09 15:51 ` Bart Van Assche
2016-08-09 17:12 ` [dm-devel] " Laurence Oberman
2016-08-09 17:16 ` Bart Van Assche
2016-08-09 17:21 ` Laurence Oberman
2016-08-10 21:38 ` Laurence Oberman
2016-08-11 16:51 ` Laurence Oberman
2016-08-05 18:40 ` Bart Van Assche
2016-07-21 20:32 ` Mike Snitzer
2016-07-21 20:40 ` [dm-devel] " Bart Van Assche
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160726011607.GA77078@redhat.com \
--to=snitzer@redhat.com \
--cc=bart.vanassche@sandisk.com \
--cc=dm-devel@redhat.com \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).