From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To: "Martin K . Petersen" <martin.petersen@oracle.com>,
linux-scsi@vger.kernel.org,
"James E.J. Bottomley" <jejb@linux.vnet.ibm.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
Sathya Prakash <sathya.prakash@broadcom.com>,
Chaitra P B <chaitra.basappa@broadcom.com>,
Suganath Prabu Subramani <suganath-prabu.subramani@broadcom.com>
Subject: [PATCH v3 2/6] fusion: print lan address via %pMR
Date: Sat, 22 Oct 2016 20:32:27 +0300 [thread overview]
Message-ID: <20161022173231.170417-3-andriy.shevchenko@linux.intel.com> (raw)
In-Reply-To: <20161022173231.170417-1-andriy.shevchenko@linux.intel.com>
LAN MAC addresses can be printed directly using %pMR specifier.
Cc: Sathya Prakash <sathya.prakash@broadcom.com>
Cc: Chaitra P B <chaitra.basappa@broadcom.com>
Cc: Suganath Prabu Subramani <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
drivers/message/fusion/mptbase.c | 14 ++++----------
1 file changed, 4 insertions(+), 10 deletions(-)
diff --git a/drivers/message/fusion/mptbase.c b/drivers/message/fusion/mptbase.c
index 89c7ed1..f82745c 100644
--- a/drivers/message/fusion/mptbase.c
+++ b/drivers/message/fusion/mptbase.c
@@ -2585,10 +2585,7 @@ mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag)
(void) GetLanConfigPages(ioc);
a = (u8*)&ioc->lan_cnfg_page1.HardwareAddressLow;
dprintk(ioc, printk(MYIOC_s_DEBUG_FMT
- "LanAddr = %02X:%02X:%02X"
- ":%02X:%02X:%02X\n",
- ioc->name, a[5], a[4],
- a[3], a[2], a[1], a[0]));
+ "LanAddr = %pMR\n", ioc->name, a));
}
break;
@@ -6783,8 +6780,7 @@ static int mpt_iocinfo_proc_show(struct seq_file *m, void *v)
if (ioc->bus_type == FC) {
if (ioc->pfacts[p].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_LAN) {
u8 *a = (u8*)&ioc->lan_cnfg_page1.HardwareAddressLow;
- seq_printf(m, " LanAddr = %02X:%02X:%02X:%02X:%02X:%02X\n",
- a[5], a[4], a[3], a[2], a[1], a[0]);
+ seq_printf(m, " LanAddr = %pMR\n", a);
}
seq_printf(m, " WWN = %08X%08X:%08X%08X\n",
ioc->fc_port_page0[p].WWNN.High,
@@ -6861,8 +6857,7 @@ mpt_print_ioc_summary(MPT_ADAPTER *ioc, char *buffer, int *size, int len, int sh
if (showlan && (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_LAN)) {
u8 *a = (u8*)&ioc->lan_cnfg_page1.HardwareAddressLow;
- y += sprintf(buffer+len+y, ", LanAddr=%02X:%02X:%02X:%02X:%02X:%02X",
- a[5], a[4], a[3], a[2], a[1], a[0]);
+ y += sprintf(buffer+len+y, ", LanAddr=%pMR", a);
}
y += sprintf(buffer+len+y, ", IRQ=%d", ioc->pci_irq);
@@ -6896,8 +6891,7 @@ static void seq_mpt_print_ioc_summary(MPT_ADAPTER *ioc, struct seq_file *m, int
if (showlan && (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_LAN)) {
u8 *a = (u8*)&ioc->lan_cnfg_page1.HardwareAddressLow;
- seq_printf(m, ", LanAddr=%02X:%02X:%02X:%02X:%02X:%02X",
- a[5], a[4], a[3], a[2], a[1], a[0]);
+ seq_printf(m, ", LanAddr=%pMR", a);
}
seq_printf(m, ", IRQ=%d", ioc->pci_irq);
--
2.9.3
next prev parent reply other threads:[~2016-10-22 17:32 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-10-22 17:32 [PATCH v3 0/6] scsi: collection of clean ups Andy Shevchenko
2016-10-22 17:32 ` [PATCH v3 1/6] scsi: fnic: use kernel's '%pM' format option to print MAC Andy Shevchenko
2016-10-24 12:29 ` Ewan D. Milne
2016-10-22 17:32 ` Andy Shevchenko [this message]
2016-10-24 12:32 ` [PATCH v3 2/6] fusion: print lan address via %pMR Ewan D. Milne
2016-10-22 17:32 ` [PATCH v3 3/6] scsi: qla4xxx: print MAC and SID via %p[mM][R] Andy Shevchenko
2016-10-24 12:34 ` Ewan D. Milne
2016-10-22 17:32 ` [PATCH v3 4/6] [SCSI] ips: don't use custom hex_asc_upper[] table Andy Shevchenko
2016-10-24 12:34 ` Ewan D. Milne
2016-10-22 17:32 ` [PATCH v3 5/6] scsi: replace custom approach to hexdump small buffers Andy Shevchenko
2016-10-24 12:35 ` Ewan D. Milne
2016-10-22 17:32 ` [PATCH v3 6/6] cciss: replace custom function to hexdump Andy Shevchenko
2016-10-25 2:12 ` [PATCH v3 0/6] scsi: collection of clean ups Martin K. Petersen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20161022173231.170417-3-andriy.shevchenko@linux.intel.com \
--to=andriy.shevchenko@linux.intel.com \
--cc=chaitra.basappa@broadcom.com \
--cc=jejb@linux.vnet.ibm.com \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
--cc=sathya.prakash@broadcom.com \
--cc=suganath-prabu.subramani@broadcom.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).