[PATCH 13/16] aacraid: Reorder Adapter status check

[Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>]

The driver currently checks the SELF_TEST_FAILED first and then
KERNEL_PANIC next. Under error conditions(boot code failure) both
SELF_TEST_FAILED and KERNEL_PANIC can be set at the same time.

The driver has the capability to reset the controller on an KERNEL_PANIC
, but not on SELF_TEST_FAILED.

Fixed by first checking KERNEL_PANIC and then the others.

Cc: stable@vger.kernel.org
Fixes: e8b12f0fb835223752 ([SCSI] aacraid: Add new code for PMC-Sierra's SRC base controller family)
Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
Reviewed-by: David Carroll <David.Carroll@microsemi.com>
---
 drivers/scsi/aacraid/src.c | 21 +++++++++++++++++----
 1 file changed, 17 insertions(+), 4 deletions(-)

diff --git a/drivers/scsi/aacraid/src.c b/drivers/scsi/aacraid/src.c
index 5bb9865..0990117 100644
--- a/drivers/scsi/aacraid/src.c
+++ b/drivers/scsi/aacraid/src.c
@@ -437,16 +437,23 @@ static int aac_src_check_health(struct aac_dev *dev)
 	u32 status = src_readl(dev, MUnit.OMR);
 
 	/*
+	 *	Check to see if the board panic'd.
+	 */
+	if (unlikely(status & KERNEL_PANIC))
+		goto err_blink;
+
+	/*
 	 *	Check to see if the board failed any self tests.
 	 */
 	if (unlikely(status & SELF_TEST_FAILED))
-		return -1;
+		goto err_out;
 
 	/*
-	 *	Check to see if the board panic'd.
+	 *	Check to see if the board failed any self tests.
 	 */
-	if (unlikely(status & KERNEL_PANIC))
-		return (status >> 16) & 0xFF;
+	if (unlikely(status & MONITOR_PANIC))
+		goto err_out;
+
 	/*
 	 *	Wait for the adapter to be up and running.
 	 */
@@ -456,6 +463,12 @@ static int aac_src_check_health(struct aac_dev *dev)
 	 *	Everything is OK
 	 */
 	return 0;
+
+err_out:
+	return -1;
+
+err_blink:
+	return (status > 16) & 0xFF;
 }
 
 static inline u32 aac_get_vector(struct aac_dev *dev)
-- 
2.7.4