From: jsmart2021@gmail.com
To: linux-scsi@vger.kernel.org, linux-nvme@lists.infradead.org,
sagi@grimberg.me, martin.petersen@oracle.com
Cc: James Smart <jsmart2021@gmail.com>,
Dick Kennedy <dick.kennedy@broadcom.com>,
James Smart <james.smart@broadcom.com>
Subject: [PATCH-v1 03/22] Fix rejected nvme LS Req.
Date: Wed, 19 Apr 2017 21:46:22 -0700 [thread overview]
Message-ID: <20170420044641.10657-4-jsmart2021@gmail.com> (raw)
In-Reply-To: <20170420044641.10657-1-jsmart2021@gmail.com>
From: James Smart <jsmart2021@gmail.com>
In this case, the NVME initiator is sending an LS REQ command on an NDLP
that is not MAPPED. The FW rejects it.
The lpfc_nvme_ls_req routine checks for a NULL ndlp pointer
but does not check the NDLP state. This allows the routine
to send an LS IO when the ndlp is disconnected.
Check the ndlp for NULL, actual node, Target and MAPPED
or Initiator and UNMAPPED. This avoids Fabric nodes getting
the Create Association or Create Connection commands. Initiators
are free to Reject either Create.
Also some of the messages numbers in lpfc_nvme_ls_req were changed because
they were already used in other log messages.
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
---
drivers/scsi/lpfc/lpfc_nvme.c | 25 ++++++++++++++++++++-----
1 file changed, 20 insertions(+), 5 deletions(-)
diff --git a/drivers/scsi/lpfc/lpfc_nvme.c b/drivers/scsi/lpfc/lpfc_nvme.c
index a39d72c..2a87428 100644
--- a/drivers/scsi/lpfc/lpfc_nvme.c
+++ b/drivers/scsi/lpfc/lpfc_nvme.c
@@ -417,11 +417,26 @@ lpfc_nvme_ls_req(struct nvme_fc_local_port *pnvme_lport,
vport = lport->vport;
ndlp = lpfc_findnode_did(vport, pnvme_rport->port_id);
- if (!ndlp) {
- lpfc_printf_vlog(vport, KERN_ERR, LOG_NVME_DISC,
- "6043 Could not find node for DID %x\n",
+ if (!ndlp || !NLP_CHK_NODE_ACT(ndlp)) {
+ lpfc_printf_vlog(vport, KERN_ERR, LOG_NODE | LOG_NVME_IOERR,
+ "6051 DID x%06x not an active rport.\n",
pnvme_rport->port_id);
- return 1;
+ return -ENODEV;
+ }
+
+ /* The remote node has to be a mapped nvme target or an
+ * unmapped nvme initiator or it's an error.
+ */
+ if (((ndlp->nlp_type & NLP_NVME_TARGET) &&
+ (ndlp->nlp_state != NLP_STE_MAPPED_NODE)) ||
+ ((ndlp->nlp_type & NLP_NVME_INITIATOR) &&
+ (ndlp->nlp_state != NLP_STE_UNMAPPED_NODE))) {
+ lpfc_printf_vlog(vport, KERN_ERR, LOG_NODE | LOG_NVME_IOERR,
+ "6088 DID x%06x not ready for "
+ "IO. State x%x, Type x%x\n",
+ pnvme_rport->port_id,
+ ndlp->nlp_state, ndlp->nlp_type);
+ return -ENODEV;
}
bmp = kmalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL);
if (!bmp) {
@@ -456,7 +471,7 @@ lpfc_nvme_ls_req(struct nvme_fc_local_port *pnvme_lport,
/* Expand print to include key fields. */
lpfc_printf_vlog(vport, KERN_INFO, LOG_NVME_DISC,
- "6051 ENTER. lport %p, rport %p lsreq%p rqstlen:%d "
+ "6149 ENTER. lport %p, rport %p lsreq%p rqstlen:%d "
"rsplen:%d %pad %pad\n",
pnvme_lport, pnvme_rport,
pnvme_lsreq, pnvme_lsreq->rqstlen,
--
2.1.0
next prev parent reply other threads:[~2017-04-20 4:46 UTC|newest]
Thread overview: 50+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-04-20 4:46 [PATCH-v1 00/22] lpfc updates for 11.2.0.12 jsmart2021
2017-04-20 4:46 ` [PATCH-v1 01/22] Standardize nvme SGL segment count jsmart2021
2017-04-20 7:15 ` Johannes Thumshirn
2017-04-20 4:46 ` [PATCH-v1 02/22] Fix nvme unregister port timeout jsmart2021
2017-04-20 7:15 ` Johannes Thumshirn
2017-04-20 4:46 ` jsmart2021 [this message]
2017-04-20 7:29 ` [PATCH-v1 03/22] Fix rejected nvme LS Req Johannes Thumshirn
2017-04-20 4:46 ` [PATCH-v1 04/22] Fix log message in completion path jsmart2021
2017-04-20 7:32 ` Johannes Thumshirn
2017-04-20 4:46 ` [PATCH-v1 05/22] Add debug messages for nvme/fcp resource allocation jsmart2021
2017-04-20 7:33 ` Johannes Thumshirn
2017-04-20 4:46 ` [PATCH-v1 06/22] Fix spelling in comments jsmart2021
2017-04-20 7:34 ` Johannes Thumshirn
2017-04-20 4:46 ` [PATCH-v1 07/22] Remove unused defines for NVME PostBuf jsmart2021
2017-04-20 7:34 ` Johannes Thumshirn
2017-04-20 4:46 ` [PATCH-v1 08/22] Remove NULL ptr check before kfree jsmart2021
2017-04-20 7:34 ` Johannes Thumshirn
2017-04-20 4:46 ` [PATCH-v1 09/22] Fix extra line print in rqpair debug print jsmart2021
2017-04-20 7:35 ` Johannes Thumshirn
2017-04-20 4:46 ` [PATCH-v1 10/22] Fix PRLI ACC rsp for NVME jsmart2021
2017-04-20 7:35 ` Johannes Thumshirn
2017-04-20 4:46 ` [PATCH-v1 11/22] Fix driver unload/reload operation jsmart2021
2017-04-20 7:37 ` Johannes Thumshirn
2017-04-20 9:08 ` Junichi Nomura
2017-04-20 4:46 ` [PATCH-v1 12/22] Fix driver usage of 128B WQEs when WQ_CREATE is V1 jsmart2021
2017-04-20 7:37 ` Johannes Thumshirn
2017-04-20 4:46 ` [PATCH-v1 13/22] Fix nvme initiator handling when not enabled jsmart2021
2017-04-20 7:38 ` Johannes Thumshirn
2017-04-20 4:46 ` [PATCH-v1 14/22] Remove hba lock from NVMET issue WQE jsmart2021
2017-04-20 7:40 ` Johannes Thumshirn
2017-04-20 4:46 ` [PATCH-v1 15/22] Fix driver load issues when MRQ=8 jsmart2021
2017-04-20 7:42 ` Johannes Thumshirn
2017-04-20 4:46 ` [PATCH-v1 16/22] Fix crash after issuing lip reset jsmart2021
2017-04-20 7:42 ` Johannes Thumshirn
2017-04-20 4:46 ` [PATCH-v1 17/22] Fix max_sgl_segments settings for NVME / NVMET jsmart2021
2017-04-20 4:46 ` [PATCH-v1 18/22] Add Fabric assigned WWN support jsmart2021
2017-04-20 7:49 ` Johannes Thumshirn
2017-04-20 4:46 ` [PATCH-v1 19/22] Fix implicit logo and RSCN handling for NVMET jsmart2021
2017-04-20 7:53 ` Johannes Thumshirn
2017-04-20 4:46 ` [PATCH-v1 20/22] Update ABORT processing " jsmart2021
2017-04-20 8:10 ` Johannes Thumshirn
2017-04-20 4:46 ` [PATCH-v1 21/22] Fix Express lane queue creation jsmart2021
2017-04-20 8:11 ` Johannes Thumshirn
2017-04-20 4:46 ` [PATCH-v1 22/22] lpfc revison 11.2.0.12 jsmart2021
2017-04-20 8:11 ` Johannes Thumshirn
2017-04-20 18:30 ` [PATCH-v1 00/22] lpfc updates for 11.2.0.12 Jens Axboe
2017-04-20 18:54 ` James Smart
2017-04-21 7:00 ` Johannes Thumshirn
2017-04-21 11:24 ` Martin K. Petersen
2017-04-21 16:41 ` James Smart
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170420044641.10657-4-jsmart2021@gmail.com \
--to=jsmart2021@gmail.com \
--cc=dick.kennedy@broadcom.com \
--cc=james.smart@broadcom.com \
--cc=linux-nvme@lists.infradead.org \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
--cc=sagi@grimberg.me \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox