From: Bart Van Assche <bart.vanassche@sandisk.com>
To: "Martin K . Petersen" <martin.petersen@oracle.com>,
James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: linux-scsi@vger.kernel.org, linux-block@vger.kernel.org,
Bart Van Assche <bart.vanassche@sandisk.com>,
Christoph Hellwig <hch@lst.de>, Hannes Reinecke <hare@suse.com>,
Johannes Thumshirn <jthumshirn@suse.de>
Subject: [PATCH 03/31] Protect SCSI device state changes with a mutex
Date: Tue, 23 May 2017 17:33:52 -0700 [thread overview]
Message-ID: <20170524003420.5381-4-bart.vanassche@sandisk.com> (raw)
In-Reply-To: <20170524003420.5381-1-bart.vanassche@sandisk.com>
Enable this mechanism for all scsi_target_*block() callers but not
for the scsi_internal_device_unblock() calls from the mpt3sas driver
because that driver can call scsi_internal_device_unblock() from
atomic context.
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
---
drivers/scsi/scsi_error.c | 8 +++++++-
drivers/scsi/scsi_lib.c | 27 +++++++++++++++++++++------
drivers/scsi/scsi_scan.c | 16 +++++++++-------
drivers/scsi/scsi_sysfs.c | 24 +++++++++++++++++++-----
drivers/scsi/scsi_transport_srp.c | 7 ++++---
drivers/scsi/sd.c | 7 +++++--
include/scsi/scsi_device.h | 1 +
7 files changed, 66 insertions(+), 24 deletions(-)
diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c
index ecc07dab893d..ac3196420435 100644
--- a/drivers/scsi/scsi_error.c
+++ b/drivers/scsi/scsi_error.c
@@ -1628,11 +1628,17 @@ static void scsi_eh_offline_sdevs(struct list_head *work_q,
struct list_head *done_q)
{
struct scsi_cmnd *scmd, *next;
+ struct scsi_device *sdev;
list_for_each_entry_safe(scmd, next, work_q, eh_entry) {
sdev_printk(KERN_INFO, scmd->device, "Device offlined - "
"not ready after error recovery\n");
- scsi_device_set_state(scmd->device, SDEV_OFFLINE);
+ sdev = scmd->device;
+
+ mutex_lock(&sdev->state_mutex);
+ scsi_device_set_state(sdev, SDEV_OFFLINE);
+ mutex_unlock(&sdev->state_mutex);
+
scsi_eh_finish_cmd(scmd, done_q);
}
return;
diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index 7ed71db8c38a..3d82cbe605cd 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -2870,7 +2870,12 @@ static void scsi_wait_for_queuecommand(struct scsi_device *sdev)
int
scsi_device_quiesce(struct scsi_device *sdev)
{
- int err = scsi_device_set_state(sdev, SDEV_QUIESCE);
+ int err;
+
+ mutex_lock(&sdev->state_mutex);
+ err = scsi_device_set_state(sdev, SDEV_QUIESCE);
+ mutex_unlock(&sdev->state_mutex);
+
if (err)
return err;
@@ -2898,10 +2903,11 @@ void scsi_device_resume(struct scsi_device *sdev)
* so assume the state is being managed elsewhere (for example
* device deleted during suspend)
*/
- if (sdev->sdev_state != SDEV_QUIESCE ||
- scsi_device_set_state(sdev, SDEV_RUNNING))
- return;
- scsi_run_queue(sdev->request_queue);
+ mutex_lock(&sdev->state_mutex);
+ if (sdev->sdev_state == SDEV_QUIESCE &&
+ scsi_device_set_state(sdev, SDEV_RUNNING) == 0)
+ scsi_run_queue(sdev->request_queue);
+ mutex_unlock(&sdev->state_mutex);
}
EXPORT_SYMBOL(scsi_device_resume);
@@ -3000,6 +3006,7 @@ static int scsi_internal_device_block(struct scsi_device *sdev)
struct request_queue *q = sdev->request_queue;
int err;
+ mutex_lock(&sdev->state_mutex);
err = scsi_internal_device_block_nowait(sdev);
if (err == 0) {
if (q->mq_ops)
@@ -3007,6 +3014,8 @@ static int scsi_internal_device_block(struct scsi_device *sdev)
else
scsi_wait_for_queuecommand(sdev);
}
+ mutex_unlock(&sdev->state_mutex);
+
return err;
}
@@ -3077,7 +3086,13 @@ EXPORT_SYMBOL_GPL(scsi_internal_device_unblock_nowait);
static int scsi_internal_device_unblock(struct scsi_device *sdev,
enum scsi_device_state new_state)
{
- return scsi_internal_device_unblock_nowait(sdev, new_state);
+ int ret;
+
+ mutex_lock(&sdev->state_mutex);
+ ret = scsi_internal_device_unblock_nowait(sdev, new_state);
+ mutex_unlock(&sdev->state_mutex);
+
+ return ret;
}
static void
diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c
index 6f7128f49c30..e6de4eee97a3 100644
--- a/drivers/scsi/scsi_scan.c
+++ b/drivers/scsi/scsi_scan.c
@@ -231,6 +231,7 @@ static struct scsi_device *scsi_alloc_sdev(struct scsi_target *starget,
sdev->id = starget->id;
sdev->lun = lun;
sdev->channel = starget->channel;
+ mutex_init(&sdev->state_mutex);
sdev->sdev_state = SDEV_CREATED;
INIT_LIST_HEAD(&sdev->siblings);
INIT_LIST_HEAD(&sdev->same_target_siblings);
@@ -943,16 +944,17 @@ static int scsi_add_lun(struct scsi_device *sdev, unsigned char *inq_result,
/* set the device running here so that slave configure
* may do I/O */
+ mutex_lock(&sdev->state_mutex);
ret = scsi_device_set_state(sdev, SDEV_RUNNING);
- if (ret) {
+ if (ret)
ret = scsi_device_set_state(sdev, SDEV_BLOCK);
+ mutex_unlock(&sdev->state_mutex);
- if (ret) {
- sdev_printk(KERN_ERR, sdev,
- "in wrong state %s to complete scan\n",
- scsi_device_state_name(sdev->sdev_state));
- return SCSI_SCAN_NO_RESPONSE;
- }
+ if (ret) {
+ sdev_printk(KERN_ERR, sdev,
+ "in wrong state %s to complete scan\n",
+ scsi_device_state_name(sdev->sdev_state));
+ return SCSI_SCAN_NO_RESPONSE;
}
if (*bflags & BLIST_MS_192_BYTES_FOR_3F)
diff --git a/drivers/scsi/scsi_sysfs.c b/drivers/scsi/scsi_sysfs.c
index 82dfe07b1d47..a91537a3abbf 100644
--- a/drivers/scsi/scsi_sysfs.c
+++ b/drivers/scsi/scsi_sysfs.c
@@ -719,7 +719,7 @@ static ssize_t
store_state_field(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
- int i;
+ int i, ret;
struct scsi_device *sdev = to_scsi_device(dev);
enum scsi_device_state state = 0;
@@ -734,9 +734,11 @@ store_state_field(struct device *dev, struct device_attribute *attr,
if (!state)
return -EINVAL;
- if (scsi_device_set_state(sdev, state))
- return -EINVAL;
- return count;
+ mutex_lock(&sdev->state_mutex);
+ ret = scsi_device_set_state(sdev, state);
+ mutex_unlock(&sdev->state_mutex);
+
+ return ret == 0 ? count : -EINVAL;
}
static ssize_t
@@ -1272,6 +1274,7 @@ int scsi_sysfs_add_sdev(struct scsi_device *sdev)
void __scsi_remove_device(struct scsi_device *sdev)
{
struct device *dev = &sdev->sdev_gendev;
+ int res;
/*
* This cleanup path is not reentrant and while it is impossible
@@ -1282,7 +1285,15 @@ void __scsi_remove_device(struct scsi_device *sdev)
return;
if (sdev->is_visible) {
- if (scsi_device_set_state(sdev, SDEV_CANCEL) != 0)
+ /*
+ * If scsi_internal_target_block() is running concurrently,
+ * wait until it has finished before changing the device state.
+ */
+ mutex_lock(&sdev->state_mutex);
+ res = scsi_device_set_state(sdev, SDEV_CANCEL);
+ mutex_unlock(&sdev->state_mutex);
+
+ if (res != 0)
return;
bsg_unregister_queue(sdev->request_queue);
@@ -1298,7 +1309,10 @@ void __scsi_remove_device(struct scsi_device *sdev)
* scsi_run_queue() invocations have finished before tearing down the
* device.
*/
+ mutex_lock(&sdev->state_mutex);
scsi_device_set_state(sdev, SDEV_DEL);
+ mutex_unlock(&sdev->state_mutex);
+
blk_cleanup_queue(sdev->request_queue);
cancel_work_sync(&sdev->requeue_work);
diff --git a/drivers/scsi/scsi_transport_srp.c b/drivers/scsi/scsi_transport_srp.c
index 3c5d89852e9f..f617021c94f7 100644
--- a/drivers/scsi/scsi_transport_srp.c
+++ b/drivers/scsi/scsi_transport_srp.c
@@ -554,11 +554,12 @@ int srp_reconnect_rport(struct srp_rport *rport)
* invoking scsi_target_unblock() won't change the state of
* these devices into running so do that explicitly.
*/
- spin_lock_irq(shost->host_lock);
- __shost_for_each_device(sdev, shost)
+ shost_for_each_device(sdev, shost) {
+ mutex_lock(&sdev->state_mutex);
if (sdev->sdev_state == SDEV_OFFLINE)
sdev->sdev_state = SDEV_RUNNING;
- spin_unlock_irq(shost->host_lock);
+ mutex_unlock(&sdev->state_mutex);
+ }
} else if (rport->state == SRP_RPORT_RUNNING) {
/*
* srp_reconnect_rport() has been invoked with fast_io_fail
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index f9d1432d7cc5..aea55f5afed0 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -1798,8 +1798,9 @@ static void sd_eh_reset(struct scsi_cmnd *scmd)
static int sd_eh_action(struct scsi_cmnd *scmd, int eh_disp)
{
struct scsi_disk *sdkp = scsi_disk(scmd->request->rq_disk);
+ struct scsi_device *sdev = scmd->device;
- if (!scsi_device_online(scmd->device) ||
+ if (!scsi_device_online(sdev) ||
!scsi_medium_access_command(scmd) ||
host_byte(scmd->result) != DID_TIME_OUT ||
eh_disp != SUCCESS)
@@ -1825,7 +1826,9 @@ static int sd_eh_action(struct scsi_cmnd *scmd, int eh_disp)
if (sdkp->medium_access_timed_out >= sdkp->max_medium_access_timeouts) {
scmd_printk(KERN_ERR, scmd,
"Medium access timeout failure. Offlining disk!\n");
- scsi_device_set_state(scmd->device, SDEV_OFFLINE);
+ mutex_lock(&sdev->state_mutex);
+ scsi_device_set_state(sdev, SDEV_OFFLINE);
+ mutex_unlock(&sdev->state_mutex);
return SUCCESS;
}
diff --git a/include/scsi/scsi_device.h b/include/scsi/scsi_device.h
index 5f24dae2a8e1..d13bc80825b1 100644
--- a/include/scsi/scsi_device.h
+++ b/include/scsi/scsi_device.h
@@ -207,6 +207,7 @@ struct scsi_device {
void *handler_data;
unsigned char access_state;
+ struct mutex state_mutex;
enum scsi_device_state sdev_state;
unsigned long sdev_data[0];
} __attribute__((aligned(sizeof(unsigned long))));
--
2.12.2
next prev parent reply other threads:[~2017-05-24 0:33 UTC|newest]
Thread overview: 78+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-05-24 0:33 [PATCH 00/31] SCSI patches for kernel v4.13 Bart Van Assche
2017-05-24 0:33 ` [PATCH 01/31] Split scsi_internal_device_block() Bart Van Assche
2017-05-24 5:48 ` Hannes Reinecke
2017-05-24 7:36 ` Johannes Thumshirn
2017-05-24 0:33 ` [PATCH 02/31] Create two versions of scsi_internal_device_unblock() Bart Van Assche
2017-05-24 5:48 ` Hannes Reinecke
2017-05-24 7:38 ` Johannes Thumshirn
2017-05-24 0:33 ` Bart Van Assche [this message]
2017-05-24 5:51 ` [PATCH 03/31] Protect SCSI device state changes with a mutex Hannes Reinecke
2017-05-24 15:10 ` Bart Van Assche
2017-05-24 0:33 ` [PATCH 04/31] Introduce scsi_start_queue() Bart Van Assche
2017-05-24 5:51 ` Hannes Reinecke
2017-05-24 0:33 ` [PATCH 05/31] Make __scsi_remove_device go straight from BLOCKED to DEL Bart Van Assche
2017-05-24 5:52 ` Hannes Reinecke
2017-05-24 0:33 ` [PATCH 06/31] scmd_eh_abort_handler(): Add a comment Bart Van Assche
2017-05-24 5:53 ` Hannes Reinecke
2017-05-24 0:33 ` [PATCH 07/31] scsi: Use blk_mq_rq_to_pdu() to convert a request to a SCSI command pointer Bart Van Assche
2017-05-24 5:54 ` Hannes Reinecke
2017-05-24 7:50 ` Johannes Thumshirn
2017-05-24 0:33 ` [PATCH 08/31] sd, sr: Convert two assignments into warning statements Bart Van Assche
2017-05-24 5:55 ` Hannes Reinecke
2017-05-24 7:52 ` Johannes Thumshirn
2017-05-24 0:33 ` [PATCH 09/31] block: Avoid that blk_exit_rl() triggers a use-after-free Bart Van Assche
2017-05-24 5:55 ` Hannes Reinecke
2017-05-24 15:09 ` Tejun Heo
2017-05-24 0:33 ` [PATCH 10/31] Avoid that scsi_exit_rq() " Bart Van Assche
2017-05-24 5:58 ` Hannes Reinecke
2017-05-24 0:34 ` [PATCH 11/31] block: Introduce queue flag QUEUE_FLAG_SCSI_SUP Bart Van Assche
2017-05-24 6:01 ` Hannes Reinecke
2017-05-24 15:05 ` Bart Van Assche
2017-05-24 0:34 ` [PATCH 12/31] bsg: Check queue type before attaching to a queue Bart Van Assche
2017-05-24 6:01 ` Hannes Reinecke
2017-05-25 2:01 ` Martin K. Petersen
2017-05-24 0:34 ` [PATCH 13/31] pktcdvd: " Bart Van Assche
2017-05-24 6:02 ` Hannes Reinecke
2017-05-24 0:34 ` [PATCH 14/31] cdrom: Check private request size " Bart Van Assche
2017-05-24 6:02 ` Hannes Reinecke
[not found] ` <20170524003420.5381-1-bart.vanassche-XdAiOPVOjttBDgjK7y7TUQ@public.gmane.org>
2017-05-24 0:34 ` [PATCH 15/31] nfsd: Check private request size before submitting a SCSI request Bart Van Assche
[not found] ` <20170524003420.5381-16-bart.vanassche-XdAiOPVOjttBDgjK7y7TUQ@public.gmane.org>
2017-05-24 6:02 ` Hannes Reinecke
2017-05-24 0:34 ` [PATCH 16/31] scsi: Make scsi_ioctl_reset() pass the request queue pointer to blk_rq_init() Bart Van Assche
2017-05-24 6:03 ` Hannes Reinecke
2017-05-24 0:34 ` [PATCH 17/31] block: Introduce request_queue.initialize_rq_fn() Bart Van Assche
2017-05-24 6:04 ` Hannes Reinecke
2017-05-24 0:34 ` [PATCH 18/31] block: Make scsi_req_init() calls implicit Bart Van Assche
2017-05-24 6:05 ` Hannes Reinecke
2017-05-24 0:34 ` [PATCH 19/31] scsi: Change argument type of scsi_req_init() Bart Van Assche
2017-05-24 6:06 ` Hannes Reinecke
2017-05-24 0:34 ` [PATCH 20/31] scsi: Only add commands to the device command list if required by the LLD Bart Van Assche
2017-05-24 6:07 ` Hannes Reinecke
2017-05-24 0:34 ` [PATCH 21/31] scsi: Move most of scsi_init_command() into scsi_initialize_rq() Bart Van Assche
2017-05-24 6:09 ` Hannes Reinecke
2017-05-24 0:34 ` [PATCH 22/31] scsi: Inline scsi_init_command() Bart Van Assche
2017-05-24 6:09 ` Hannes Reinecke
2017-05-24 0:34 ` [PATCH 23/31] scsi: Move sense buffer pointer initialization into scsi_initialize_rq() Bart Van Assche
2017-05-24 6:10 ` Hannes Reinecke
2017-05-24 0:34 ` [PATCH 24/31] scsi: Make scsi_initialize_rq() zero the entire struct scsi_cmnd Bart Van Assche
2017-05-24 6:10 ` Hannes Reinecke
2017-05-24 0:34 ` [PATCH 25/31] scsi-mq: Make behavior scsi_mq_prep_fn() closer to that of scsi_prep_fn() Bart Van Assche
2017-05-24 6:11 ` Hannes Reinecke
2017-05-24 0:34 ` [PATCH 26/31] scsi: Move the code for clearing private command data into scsi_dispatch_cmd() Bart Van Assche
2017-05-24 6:12 ` Hannes Reinecke
2017-05-24 0:34 ` [PATCH 27/31] scsi: Consolidate more initialization code Bart Van Assche
2017-05-24 6:13 ` Hannes Reinecke
2017-05-24 0:34 ` [PATCH 28/31] scsi_setup_fs_cmnd(): Call scsi_req_init() instead of open-coding it Bart Van Assche
2017-05-24 6:13 ` Hannes Reinecke
2017-05-24 0:34 ` [PATCH 29/31] scsi: snic: Remove code that zeroes driver-private command data Bart Van Assche
2017-05-24 6:14 ` Hannes Reinecke
2017-05-24 0:34 ` [PATCH 30/31] scsi: virtio: " Bart Van Assche
2017-05-24 6:14 ` Hannes Reinecke
2017-05-24 0:34 ` [PATCH 31/31] xen/scsifront: " Bart Van Assche
2017-05-24 6:14 ` Hannes Reinecke
2017-05-24 7:02 ` Juergen Gross
2017-05-24 2:31 ` [PATCH 00/31] SCSI patches for kernel v4.13 Martin K. Petersen
2017-05-24 3:55 ` Jens Axboe
2017-05-24 4:43 ` Bart Van Assche
2017-05-25 2:04 ` Martin K. Petersen
2017-06-01 14:08 ` Bart Van Assche
2017-06-01 14:09 ` Christoph Hellwig
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170524003420.5381-4-bart.vanassche@sandisk.com \
--to=bart.vanassche@sandisk.com \
--cc=James.Bottomley@HansenPartnership.com \
--cc=hare@suse.com \
--cc=hch@lst.de \
--cc=jthumshirn@suse.de \
--cc=linux-block@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox