* [PATCH 1/2] Drop legacy megaraid controller
2017-06-30 11:05 [PATCH 0/2] Drop legacy megaraid implementation Hannes Reinecke
@ 2017-06-30 11:05 ` Hannes Reinecke
2017-06-30 17:33 ` Christoph Hellwig
2017-06-30 11:05 ` [PATCH 2/2] megaraid: drop the 'new driver' statements Hannes Reinecke
1 sibling, 1 reply; 7+ messages in thread
From: Hannes Reinecke @ 2017-06-30 11:05 UTC (permalink / raw)
To: Martin K. Petersen
Cc: Christoph Hellwig, James Bottomley, Kashyap Desai, Sumit Saxena,
linux-scsi, Hannes Reinecke, Hannes Reinecke
The hardware is ancient, and support for most cards has been moved
to megaraid_mbox. So drop it.
Signed-off-by: Hannes Reinecke <hare@suse.com>
---
MAINTAINERS | 1 -
drivers/scsi/Makefile | 1 -
drivers/scsi/megaraid.c | 4730 --------------------------------
drivers/scsi/megaraid.h | 1010 -------
drivers/scsi/megaraid/Kconfig.megaraid | 11 -
5 files changed, 5753 deletions(-)
delete mode 100644 drivers/scsi/megaraid.c
delete mode 100644 drivers/scsi/megaraid.h
diff --git a/MAINTAINERS b/MAINTAINERS
index 09b5ab6..0ab2205 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -8284,7 +8284,6 @@ L: linux-scsi@vger.kernel.org
W: http://www.avagotech.com/support/
S: Maintained
F: Documentation/scsi/megaraid.txt
-F: drivers/scsi/megaraid.*
F: drivers/scsi/megaraid/
MELFAS MIP4 TOUCHSCREEN DRIVER
diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile
index 93dbe58..3eb4552 100644
--- a/drivers/scsi/Makefile
+++ b/drivers/scsi/Makefile
@@ -97,7 +97,6 @@ obj-$(CONFIG_SCSI_EATA) += eata.o
obj-$(CONFIG_SCSI_DC395x) += dc395x.o
obj-$(CONFIG_SCSI_AM53C974) += esp_scsi.o am53c974.o
obj-$(CONFIG_CXLFLASH) += cxlflash/
-obj-$(CONFIG_MEGARAID_LEGACY) += megaraid.o
obj-$(CONFIG_MEGARAID_NEWGEN) += megaraid/
obj-$(CONFIG_MEGARAID_SAS) += megaraid/
obj-$(CONFIG_SCSI_MPT3SAS) += mpt3sas/
diff --git a/drivers/scsi/megaraid.c b/drivers/scsi/megaraid.c
deleted file mode 100644
index 3c63c29..0000000
--- a/drivers/scsi/megaraid.c
+++ /dev/null
@@ -1,4730 +0,0 @@
-/*
- *
- * Linux MegaRAID device driver
- *
- * Copyright (c) 2002 LSI Logic Corporation.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- *
- * Copyright (c) 2002 Red Hat, Inc. All rights reserved.
- * - fixes
- * - speed-ups (list handling fixes, issued_list, optimizations.)
- * - lots of cleanups.
- *
- * Copyright (c) 2003 Christoph Hellwig <hch@lst.de>
- * - new-style, hotplug-aware pci probing and scsi registration
- *
- * Version : v2.00.4 Mon Nov 14 14:02:43 EST 2005 - Seokmann Ju
- * <Seokmann.Ju@lsil.com>
- *
- * Description: Linux device driver for LSI Logic MegaRAID controller
- *
- * Supported controllers: MegaRAID 418, 428, 438, 466, 762, 467, 471, 490, 493
- * 518, 520, 531, 532
- *
- * This driver is supported by LSI Logic, with assistance from Red Hat, Dell,
- * and others. Please send updates to the mailing list
- * linux-scsi@vger.kernel.org .
- *
- */
-
-#include <linux/mm.h>
-#include <linux/fs.h>
-#include <linux/blkdev.h>
-#include <linux/uaccess.h>
-#include <asm/io.h>
-#include <linux/completion.h>
-#include <linux/delay.h>
-#include <linux/proc_fs.h>
-#include <linux/seq_file.h>
-#include <linux/reboot.h>
-#include <linux/module.h>
-#include <linux/list.h>
-#include <linux/interrupt.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/dma-mapping.h>
-#include <linux/mutex.h>
-#include <linux/slab.h>
-#include <scsi/scsicam.h>
-
-#include "scsi.h"
-#include <scsi/scsi_host.h>
-
-#include "megaraid.h"
-
-#define MEGARAID_MODULE_VERSION "2.00.4"
-
-MODULE_AUTHOR ("sju@lsil.com");
-MODULE_DESCRIPTION ("LSI Logic MegaRAID legacy driver");
-MODULE_LICENSE ("GPL");
-MODULE_VERSION(MEGARAID_MODULE_VERSION);
-
-static DEFINE_MUTEX(megadev_mutex);
-static unsigned int max_cmd_per_lun = DEF_CMD_PER_LUN;
-module_param(max_cmd_per_lun, uint, 0);
-MODULE_PARM_DESC(max_cmd_per_lun, "Maximum number of commands which can be issued to a single LUN (default=DEF_CMD_PER_LUN=63)");
-
-static unsigned short int max_sectors_per_io = MAX_SECTORS_PER_IO;
-module_param(max_sectors_per_io, ushort, 0);
-MODULE_PARM_DESC(max_sectors_per_io, "Maximum number of sectors per I/O request (default=MAX_SECTORS_PER_IO=128)");
-
-
-static unsigned short int max_mbox_busy_wait = MBOX_BUSY_WAIT;
-module_param(max_mbox_busy_wait, ushort, 0);
-MODULE_PARM_DESC(max_mbox_busy_wait, "Maximum wait for mailbox in microseconds if busy (default=MBOX_BUSY_WAIT=10)");
-
-#define RDINDOOR(adapter) readl((adapter)->mmio_base + 0x20)
-#define RDOUTDOOR(adapter) readl((adapter)->mmio_base + 0x2C)
-#define WRINDOOR(adapter,value) writel(value, (adapter)->mmio_base + 0x20)
-#define WROUTDOOR(adapter,value) writel(value, (adapter)->mmio_base + 0x2C)
-
-/*
- * Global variables
- */
-
-static int hba_count;
-static adapter_t *hba_soft_state[MAX_CONTROLLERS];
-static struct proc_dir_entry *mega_proc_dir_entry;
-
-/* For controller re-ordering */
-static struct mega_hbas mega_hbas[MAX_CONTROLLERS];
-
-static long
-megadev_unlocked_ioctl(struct file *filep, unsigned int cmd, unsigned long arg);
-
-/*
- * The File Operations structure for the serial/ioctl interface of the driver
- */
-static const struct file_operations megadev_fops = {
- .owner = THIS_MODULE,
- .unlocked_ioctl = megadev_unlocked_ioctl,
- .open = megadev_open,
- .llseek = noop_llseek,
-};
-
-/*
- * Array to structures for storing the information about the controllers. This
- * information is sent to the user level applications, when they do an ioctl
- * for this information.
- */
-static struct mcontroller mcontroller[MAX_CONTROLLERS];
-
-/* The current driver version */
-static u32 driver_ver = 0x02000000;
-
-/* major number used by the device for character interface */
-static int major;
-
-#define IS_RAID_CH(hba, ch) (((hba)->mega_ch_class >> (ch)) & 0x01)
-
-
-/*
- * Debug variable to print some diagnostic messages
- */
-static int trace_level;
-
-/**
- * mega_setup_mailbox()
- * @adapter - pointer to our soft state
- *
- * Allocates a 8 byte aligned memory for the handshake mailbox.
- */
-static int
-mega_setup_mailbox(adapter_t *adapter)
-{
- unsigned long align;
-
- adapter->una_mbox64 = pci_alloc_consistent(adapter->dev,
- sizeof(mbox64_t), &adapter->una_mbox64_dma);
-
- if( !adapter->una_mbox64 ) return -1;
-
- adapter->mbox = &adapter->una_mbox64->mbox;
-
- adapter->mbox = (mbox_t *)((((unsigned long) adapter->mbox) + 15) &
- (~0UL ^ 0xFUL));
-
- adapter->mbox64 = (mbox64_t *)(((unsigned long)adapter->mbox) - 8);
-
- align = ((void *)adapter->mbox) - ((void *)&adapter->una_mbox64->mbox);
-
- adapter->mbox_dma = adapter->una_mbox64_dma + 8 + align;
-
- /*
- * Register the mailbox if the controller is an io-mapped controller
- */
- if( adapter->flag & BOARD_IOMAP ) {
-
- outb(adapter->mbox_dma & 0xFF,
- adapter->host->io_port + MBOX_PORT0);
-
- outb((adapter->mbox_dma >> 8) & 0xFF,
- adapter->host->io_port + MBOX_PORT1);
-
- outb((adapter->mbox_dma >> 16) & 0xFF,
- adapter->host->io_port + MBOX_PORT2);
-
- outb((adapter->mbox_dma >> 24) & 0xFF,
- adapter->host->io_port + MBOX_PORT3);
-
- outb(ENABLE_MBOX_BYTE,
- adapter->host->io_port + ENABLE_MBOX_REGION);
-
- irq_ack(adapter);
-
- irq_enable(adapter);
- }
-
- return 0;
-}
-
-
-/*
- * mega_query_adapter()
- * @adapter - pointer to our soft state
- *
- * Issue the adapter inquiry commands to the controller and find out
- * information and parameter about the devices attached
- */
-static int
-mega_query_adapter(adapter_t *adapter)
-{
- dma_addr_t prod_info_dma_handle;
- mega_inquiry3 *inquiry3;
- u8 raw_mbox[sizeof(struct mbox_out)];
- mbox_t *mbox;
- int retval;
-
- /* Initialize adapter inquiry mailbox */
-
- mbox = (mbox_t *)raw_mbox;
-
- memset((void *)adapter->mega_buffer, 0, MEGA_BUFFER_SIZE);
- memset(&mbox->m_out, 0, sizeof(raw_mbox));
-
- /*
- * Try to issue Inquiry3 command
- * if not succeeded, then issue MEGA_MBOXCMD_ADAPTERINQ command and
- * update enquiry3 structure
- */
- mbox->m_out.xferaddr = (u32)adapter->buf_dma_handle;
-
- inquiry3 = (mega_inquiry3 *)adapter->mega_buffer;
-
- raw_mbox[0] = FC_NEW_CONFIG; /* i.e. mbox->cmd=0xA1 */
- raw_mbox[2] = NC_SUBOP_ENQUIRY3; /* i.e. 0x0F */
- raw_mbox[3] = ENQ3_GET_SOLICITED_FULL; /* i.e. 0x02 */
-
- /* Issue a blocking command to the card */
- if ((retval = issue_scb_block(adapter, raw_mbox))) {
- /* the adapter does not support 40ld */
-
- mraid_ext_inquiry *ext_inq;
- mraid_inquiry *inq;
- dma_addr_t dma_handle;
-
- ext_inq = pci_alloc_consistent(adapter->dev,
- sizeof(mraid_ext_inquiry), &dma_handle);
-
- if( ext_inq == NULL ) return -1;
-
- inq = &ext_inq->raid_inq;
-
- mbox->m_out.xferaddr = (u32)dma_handle;
-
- /*issue old 0x04 command to adapter */
- mbox->m_out.cmd = MEGA_MBOXCMD_ADPEXTINQ;
-
- issue_scb_block(adapter, raw_mbox);
-
- /*
- * update Enquiry3 and ProductInfo structures with
- * mraid_inquiry structure
- */
- mega_8_to_40ld(inq, inquiry3,
- (mega_product_info *)&adapter->product_info);
-
- pci_free_consistent(adapter->dev, sizeof(mraid_ext_inquiry),
- ext_inq, dma_handle);
-
- } else { /*adapter supports 40ld */
- adapter->flag |= BOARD_40LD;
-
- /*
- * get product_info, which is static information and will be
- * unchanged
- */
- prod_info_dma_handle = pci_map_single(adapter->dev, (void *)
- &adapter->product_info,
- sizeof(mega_product_info), PCI_DMA_FROMDEVICE);
-
- mbox->m_out.xferaddr = prod_info_dma_handle;
-
- raw_mbox[0] = FC_NEW_CONFIG; /* i.e. mbox->cmd=0xA1 */
- raw_mbox[2] = NC_SUBOP_PRODUCT_INFO; /* i.e. 0x0E */
-
- if ((retval = issue_scb_block(adapter, raw_mbox)))
- dev_warn(&adapter->dev->dev,
- "Product_info cmd failed with error: %d\n",
- retval);
-
- pci_unmap_single(adapter->dev, prod_info_dma_handle,
- sizeof(mega_product_info), PCI_DMA_FROMDEVICE);
- }
-
-
- /*
- * kernel scans the channels from 0 to <= max_channel
- */
- adapter->host->max_channel =
- adapter->product_info.nchannels + NVIRT_CHAN -1;
-
- adapter->host->max_id = 16; /* max targets per channel */
-
- adapter->host->max_lun = 7; /* Up to 7 luns for non disk devices */
-
- adapter->host->cmd_per_lun = max_cmd_per_lun;
-
- adapter->numldrv = inquiry3->num_ldrv;
-
- adapter->max_cmds = adapter->product_info.max_commands;
-
- if(adapter->max_cmds > MAX_COMMANDS)
- adapter->max_cmds = MAX_COMMANDS;
-
- adapter->host->can_queue = adapter->max_cmds - 1;
-
- /*
- * Get the maximum number of scatter-gather elements supported by this
- * firmware
- */
- mega_get_max_sgl(adapter);
-
- adapter->host->sg_tablesize = adapter->sglen;
-
- /* use HP firmware and bios version encoding
- Note: fw_version[0|1] and bios_version[0|1] were originally shifted
- right 8 bits making them zero. This 0 value was hardcoded to fix
- sparse warnings. */
- if (adapter->product_info.subsysvid == PCI_VENDOR_ID_HP) {
- sprintf (adapter->fw_version, "%c%d%d.%d%d",
- adapter->product_info.fw_version[2],
- 0,
- adapter->product_info.fw_version[1] & 0x0f,
- 0,
- adapter->product_info.fw_version[0] & 0x0f);
- sprintf (adapter->bios_version, "%c%d%d.%d%d",
- adapter->product_info.bios_version[2],
- 0,
- adapter->product_info.bios_version[1] & 0x0f,
- 0,
- adapter->product_info.bios_version[0] & 0x0f);
- } else {
- memcpy(adapter->fw_version,
- (char *)adapter->product_info.fw_version, 4);
- adapter->fw_version[4] = 0;
-
- memcpy(adapter->bios_version,
- (char *)adapter->product_info.bios_version, 4);
-
- adapter->bios_version[4] = 0;
- }
-
- dev_notice(&adapter->dev->dev, "[%s:%s] detected %d logical drives\n",
- adapter->fw_version, adapter->bios_version, adapter->numldrv);
-
- /*
- * Do we support extended (>10 bytes) cdbs
- */
- adapter->support_ext_cdb = mega_support_ext_cdb(adapter);
- if (adapter->support_ext_cdb)
- dev_notice(&adapter->dev->dev, "supports extended CDBs\n");
-
-
- return 0;
-}
-
-/**
- * mega_runpendq()
- * @adapter - pointer to our soft state
- *
- * Runs through the list of pending requests.
- */
-static inline void
-mega_runpendq(adapter_t *adapter)
-{
- if(!list_empty(&adapter->pending_list))
- __mega_runpendq(adapter);
-}
-
-/*
- * megaraid_queue()
- * @scmd - Issue this scsi command
- * @done - the callback hook into the scsi mid-layer
- *
- * The command queuing entry point for the mid-layer.
- */
-static int
-megaraid_queue_lck(Scsi_Cmnd *scmd, void (*done)(Scsi_Cmnd *))
-{
- adapter_t *adapter;
- scb_t *scb;
- int busy=0;
- unsigned long flags;
-
- adapter = (adapter_t *)scmd->device->host->hostdata;
-
- scmd->scsi_done = done;
-
-
- /*
- * Allocate and build a SCB request
- * busy flag will be set if mega_build_cmd() command could not
- * allocate scb. We will return non-zero status in that case.
- * NOTE: scb can be null even though certain commands completed
- * successfully, e.g., MODE_SENSE and TEST_UNIT_READY, we would
- * return 0 in that case.
- */
-
- spin_lock_irqsave(&adapter->lock, flags);
- scb = mega_build_cmd(adapter, scmd, &busy);
- if (!scb)
- goto out;
-
- scb->state |= SCB_PENDQ;
- list_add_tail(&scb->list, &adapter->pending_list);
-
- /*
- * Check if the HBA is in quiescent state, e.g., during a
- * delete logical drive opertion. If it is, don't run
- * the pending_list.
- */
- if (atomic_read(&adapter->quiescent) == 0)
- mega_runpendq(adapter);
-
- busy = 0;
- out:
- spin_unlock_irqrestore(&adapter->lock, flags);
- return busy;
-}
-
-static DEF_SCSI_QCMD(megaraid_queue)
-
-/**
- * mega_allocate_scb()
- * @adapter - pointer to our soft state
- * @cmd - scsi command from the mid-layer
- *
- * Allocate a SCB structure. This is the central structure for controller
- * commands.
- */
-static inline scb_t *
-mega_allocate_scb(adapter_t *adapter, Scsi_Cmnd *cmd)
-{
- struct list_head *head = &adapter->free_list;
- scb_t *scb;
-
- /* Unlink command from Free List */
- if( !list_empty(head) ) {
-
- scb = list_entry(head->next, scb_t, list);
-
- list_del_init(head->next);
-
- scb->state = SCB_ACTIVE;
- scb->cmd = cmd;
- scb->dma_type = MEGA_DMA_TYPE_NONE;
-
- return scb;
- }
-
- return NULL;
-}
-
-/**
- * mega_get_ldrv_num()
- * @adapter - pointer to our soft state
- * @cmd - scsi mid layer command
- * @channel - channel on the controller
- *
- * Calculate the logical drive number based on the information in scsi command
- * and the channel number.
- */
-static inline int
-mega_get_ldrv_num(adapter_t *adapter, Scsi_Cmnd *cmd, int channel)
-{
- int tgt;
- int ldrv_num;
-
- tgt = cmd->device->id;
-
- if ( tgt > adapter->this_id )
- tgt--; /* we do not get inquires for initiator id */
-
- ldrv_num = (channel * 15) + tgt;
-
-
- /*
- * If we have a logical drive with boot enabled, project it first
- */
- if( adapter->boot_ldrv_enabled ) {
- if( ldrv_num == 0 ) {
- ldrv_num = adapter->boot_ldrv;
- }
- else {
- if( ldrv_num <= adapter->boot_ldrv ) {
- ldrv_num--;
- }
- }
- }
-
- /*
- * If "delete logical drive" feature is enabled on this controller.
- * Do only if at least one delete logical drive operation was done.
- *
- * Also, after logical drive deletion, instead of logical drive number,
- * the value returned should be 0x80+logical drive id.
- *
- * These is valid only for IO commands.
- */
-
- if (adapter->support_random_del && adapter->read_ldidmap )
- switch (cmd->cmnd[0]) {
- case READ_6: /* fall through */
- case WRITE_6: /* fall through */
- case READ_10: /* fall through */
- case WRITE_10:
- ldrv_num += 0x80;
- }
-
- return ldrv_num;
-}
-
-/**
- * mega_build_cmd()
- * @adapter - pointer to our soft state
- * @cmd - Prepare using this scsi command
- * @busy - busy flag if no resources
- *
- * Prepares a command and scatter gather list for the controller. This routine
- * also finds out if the commands is intended for a logical drive or a
- * physical device and prepares the controller command accordingly.
- *
- * We also re-order the logical drives and physical devices based on their
- * boot settings.
- */
-static scb_t *
-mega_build_cmd(adapter_t *adapter, Scsi_Cmnd *cmd, int *busy)
-{
- mega_ext_passthru *epthru;
- mega_passthru *pthru;
- scb_t *scb;
- mbox_t *mbox;
- u32 seg;
- char islogical;
- int max_ldrv_num;
- int channel = 0;
- int target = 0;
- int ldrv_num = 0; /* logical drive number */
-
- /*
- * We know what channels our logical drives are on - mega_find_card()
- */
- islogical = adapter->logdrv_chan[cmd->device->channel];
-
- /*
- * The theory: If physical drive is chosen for boot, all the physical
- * devices are exported before the logical drives, otherwise physical
- * devices are pushed after logical drives, in which case - Kernel sees
- * the physical devices on virtual channel which is obviously converted
- * to actual channel on the HBA.
- */
- if( adapter->boot_pdrv_enabled ) {
- if( islogical ) {
- /* logical channel */
- channel = cmd->device->channel -
- adapter->product_info.nchannels;
- }
- else {
- /* this is physical channel */
- channel = cmd->device->channel;
- target = cmd->device->id;
-
- /*
- * boot from a physical disk, that disk needs to be
- * exposed first IF both the channels are SCSI, then
- * booting from the second channel is not allowed.
- */
- if( target == 0 ) {
- target = adapter->boot_pdrv_tgt;
- }
- else if( target == adapter->boot_pdrv_tgt ) {
- target = 0;
- }
- }
- }
- else {
- if( islogical ) {
- /* this is the logical channel */
- channel = cmd->device->channel;
- }
- else {
- /* physical channel */
- channel = cmd->device->channel - NVIRT_CHAN;
- target = cmd->device->id;
- }
- }
-
-
- if(islogical) {
-
- /* have just LUN 0 for each target on virtual channels */
- if (cmd->device->lun) {
- cmd->result = (DID_BAD_TARGET << 16);
- cmd->scsi_done(cmd);
- return NULL;
- }
-
- ldrv_num = mega_get_ldrv_num(adapter, cmd, channel);
-
-
- max_ldrv_num = (adapter->flag & BOARD_40LD) ?
- MAX_LOGICAL_DRIVES_40LD : MAX_LOGICAL_DRIVES_8LD;
-
- /*
- * max_ldrv_num increases by 0x80 if some logical drive was
- * deleted.
- */
- if(adapter->read_ldidmap)
- max_ldrv_num += 0x80;
-
- if(ldrv_num > max_ldrv_num ) {
- cmd->result = (DID_BAD_TARGET << 16);
- cmd->scsi_done(cmd);
- return NULL;
- }
-
- }
- else {
- if( cmd->device->lun > 7) {
- /*
- * Do not support lun >7 for physically accessed
- * devices
- */
- cmd->result = (DID_BAD_TARGET << 16);
- cmd->scsi_done(cmd);
- return NULL;
- }
- }
-
- /*
- *
- * Logical drive commands
- *
- */
- if(islogical) {
- switch (cmd->cmnd[0]) {
- case TEST_UNIT_READY:
-#if MEGA_HAVE_CLUSTERING
- /*
- * Do we support clustering and is the support enabled
- * If no, return success always
- */
- if( !adapter->has_cluster ) {
- cmd->result = (DID_OK << 16);
- cmd->scsi_done(cmd);
- return NULL;
- }
-
- if(!(scb = mega_allocate_scb(adapter, cmd))) {
- *busy = 1;
- return NULL;
- }
-
- scb->raw_mbox[0] = MEGA_CLUSTER_CMD;
- scb->raw_mbox[2] = MEGA_RESERVATION_STATUS;
- scb->raw_mbox[3] = ldrv_num;
-
- scb->dma_direction = PCI_DMA_NONE;
-
- return scb;
-#else
- cmd->result = (DID_OK << 16);
- cmd->scsi_done(cmd);
- return NULL;
-#endif
-
- case MODE_SENSE: {
- char *buf;
- struct scatterlist *sg;
-
- sg = scsi_sglist(cmd);
- buf = kmap_atomic(sg_page(sg)) + sg->offset;
-
- memset(buf, 0, cmd->cmnd[4]);
- kunmap_atomic(buf - sg->offset);
-
- cmd->result = (DID_OK << 16);
- cmd->scsi_done(cmd);
- return NULL;
- }
-
- case READ_CAPACITY:
- case INQUIRY:
-
- if(!(adapter->flag & (1L << cmd->device->channel))) {
-
- dev_notice(&adapter->dev->dev,
- "scsi%d: scanning scsi channel %d "
- "for logical drives\n",
- adapter->host->host_no,
- cmd->device->channel);
-
- adapter->flag |= (1L << cmd->device->channel);
- }
-
- /* Allocate a SCB and initialize passthru */
- if(!(scb = mega_allocate_scb(adapter, cmd))) {
- *busy = 1;
- return NULL;
- }
- pthru = scb->pthru;
-
- mbox = (mbox_t *)scb->raw_mbox;
- memset(mbox, 0, sizeof(scb->raw_mbox));
- memset(pthru, 0, sizeof(mega_passthru));
-
- pthru->timeout = 0;
- pthru->ars = 1;
- pthru->reqsenselen = 14;
- pthru->islogical = 1;
- pthru->logdrv = ldrv_num;
- pthru->cdblen = cmd->cmd_len;
- memcpy(pthru->cdb, cmd->cmnd, cmd->cmd_len);
-
- if( adapter->has_64bit_addr ) {
- mbox->m_out.cmd = MEGA_MBOXCMD_PASSTHRU64;
- }
- else {
- mbox->m_out.cmd = MEGA_MBOXCMD_PASSTHRU;
- }
-
- scb->dma_direction = PCI_DMA_FROMDEVICE;
-
- pthru->numsgelements = mega_build_sglist(adapter, scb,
- &pthru->dataxferaddr, &pthru->dataxferlen);
-
- mbox->m_out.xferaddr = scb->pthru_dma_addr;
-
- return scb;
-
- case READ_6:
- case WRITE_6:
- case READ_10:
- case WRITE_10:
- case READ_12:
- case WRITE_12:
-
- /* Allocate a SCB and initialize mailbox */
- if(!(scb = mega_allocate_scb(adapter, cmd))) {
- *busy = 1;
- return NULL;
- }
- mbox = (mbox_t *)scb->raw_mbox;
-
- memset(mbox, 0, sizeof(scb->raw_mbox));
- mbox->m_out.logdrv = ldrv_num;
-
- /*
- * A little hack: 2nd bit is zero for all scsi read
- * commands and is set for all scsi write commands
- */
- if( adapter->has_64bit_addr ) {
- mbox->m_out.cmd = (*cmd->cmnd & 0x02) ?
- MEGA_MBOXCMD_LWRITE64:
- MEGA_MBOXCMD_LREAD64 ;
- }
- else {
- mbox->m_out.cmd = (*cmd->cmnd & 0x02) ?
- MEGA_MBOXCMD_LWRITE:
- MEGA_MBOXCMD_LREAD ;
- }
-
- /*
- * 6-byte READ(0x08) or WRITE(0x0A) cdb
- */
- if( cmd->cmd_len == 6 ) {
- mbox->m_out.numsectors = (u32) cmd->cmnd[4];
- mbox->m_out.lba =
- ((u32)cmd->cmnd[1] << 16) |
- ((u32)cmd->cmnd[2] << 8) |
- (u32)cmd->cmnd[3];
-
- mbox->m_out.lba &= 0x1FFFFF;
-
-#if MEGA_HAVE_STATS
- /*
- * Take modulo 0x80, since the logical drive
- * number increases by 0x80 when a logical
- * drive was deleted
- */
- if (*cmd->cmnd == READ_6) {
- adapter->nreads[ldrv_num%0x80]++;
- adapter->nreadblocks[ldrv_num%0x80] +=
- mbox->m_out.numsectors;
- } else {
- adapter->nwrites[ldrv_num%0x80]++;
- adapter->nwriteblocks[ldrv_num%0x80] +=
- mbox->m_out.numsectors;
- }
-#endif
- }
-
- /*
- * 10-byte READ(0x28) or WRITE(0x2A) cdb
- */
- if( cmd->cmd_len == 10 ) {
- mbox->m_out.numsectors =
- (u32)cmd->cmnd[8] |
- ((u32)cmd->cmnd[7] << 8);
- mbox->m_out.lba =
- ((u32)cmd->cmnd[2] << 24) |
- ((u32)cmd->cmnd[3] << 16) |
- ((u32)cmd->cmnd[4] << 8) |
- (u32)cmd->cmnd[5];
-
-#if MEGA_HAVE_STATS
- if (*cmd->cmnd == READ_10) {
- adapter->nreads[ldrv_num%0x80]++;
- adapter->nreadblocks[ldrv_num%0x80] +=
- mbox->m_out.numsectors;
- } else {
- adapter->nwrites[ldrv_num%0x80]++;
- adapter->nwriteblocks[ldrv_num%0x80] +=
- mbox->m_out.numsectors;
- }
-#endif
- }
-
- /*
- * 12-byte READ(0xA8) or WRITE(0xAA) cdb
- */
- if( cmd->cmd_len == 12 ) {
- mbox->m_out.lba =
- ((u32)cmd->cmnd[2] << 24) |
- ((u32)cmd->cmnd[3] << 16) |
- ((u32)cmd->cmnd[4] << 8) |
- (u32)cmd->cmnd[5];
-
- mbox->m_out.numsectors =
- ((u32)cmd->cmnd[6] << 24) |
- ((u32)cmd->cmnd[7] << 16) |
- ((u32)cmd->cmnd[8] << 8) |
- (u32)cmd->cmnd[9];
-
-#if MEGA_HAVE_STATS
- if (*cmd->cmnd == READ_12) {
- adapter->nreads[ldrv_num%0x80]++;
- adapter->nreadblocks[ldrv_num%0x80] +=
- mbox->m_out.numsectors;
- } else {
- adapter->nwrites[ldrv_num%0x80]++;
- adapter->nwriteblocks[ldrv_num%0x80] +=
- mbox->m_out.numsectors;
- }
-#endif
- }
-
- /*
- * If it is a read command
- */
- if( (*cmd->cmnd & 0x0F) == 0x08 ) {
- scb->dma_direction = PCI_DMA_FROMDEVICE;
- }
- else {
- scb->dma_direction = PCI_DMA_TODEVICE;
- }
-
- /* Calculate Scatter-Gather info */
- mbox->m_out.numsgelements = mega_build_sglist(adapter, scb,
- (u32 *)&mbox->m_out.xferaddr, &seg);
-
- return scb;
-
-#if MEGA_HAVE_CLUSTERING
- case RESERVE: /* Fall through */
- case RELEASE:
-
- /*
- * Do we support clustering and is the support enabled
- */
- if( ! adapter->has_cluster ) {
-
- cmd->result = (DID_BAD_TARGET << 16);
- cmd->scsi_done(cmd);
- return NULL;
- }
-
- /* Allocate a SCB and initialize mailbox */
- if(!(scb = mega_allocate_scb(adapter, cmd))) {
- *busy = 1;
- return NULL;
- }
-
- scb->raw_mbox[0] = MEGA_CLUSTER_CMD;
- scb->raw_mbox[2] = ( *cmd->cmnd == RESERVE ) ?
- MEGA_RESERVE_LD : MEGA_RELEASE_LD;
-
- scb->raw_mbox[3] = ldrv_num;
-
- scb->dma_direction = PCI_DMA_NONE;
-
- return scb;
-#endif
-
- default:
- cmd->result = (DID_BAD_TARGET << 16);
- cmd->scsi_done(cmd);
- return NULL;
- }
- }
-
- /*
- * Passthru drive commands
- */
- else {
- /* Allocate a SCB and initialize passthru */
- if(!(scb = mega_allocate_scb(adapter, cmd))) {
- *busy = 1;
- return NULL;
- }
-
- mbox = (mbox_t *)scb->raw_mbox;
- memset(mbox, 0, sizeof(scb->raw_mbox));
-
- if( adapter->support_ext_cdb ) {
-
- epthru = mega_prepare_extpassthru(adapter, scb, cmd,
- channel, target);
-
- mbox->m_out.cmd = MEGA_MBOXCMD_EXTPTHRU;
-
- mbox->m_out.xferaddr = scb->epthru_dma_addr;
-
- }
- else {
-
- pthru = mega_prepare_passthru(adapter, scb, cmd,
- channel, target);
-
- /* Initialize mailbox */
- if( adapter->has_64bit_addr ) {
- mbox->m_out.cmd = MEGA_MBOXCMD_PASSTHRU64;
- }
- else {
- mbox->m_out.cmd = MEGA_MBOXCMD_PASSTHRU;
- }
-
- mbox->m_out.xferaddr = scb->pthru_dma_addr;
-
- }
- return scb;
- }
- return NULL;
-}
-
-
-/**
- * mega_prepare_passthru()
- * @adapter - pointer to our soft state
- * @scb - our scsi control block
- * @cmd - scsi command from the mid-layer
- * @channel - actual channel on the controller
- * @target - actual id on the controller.
- *
- * prepare a command for the scsi physical devices.
- */
-static mega_passthru *
-mega_prepare_passthru(adapter_t *adapter, scb_t *scb, Scsi_Cmnd *cmd,
- int channel, int target)
-{
- mega_passthru *pthru;
-
- pthru = scb->pthru;
- memset(pthru, 0, sizeof (mega_passthru));
-
- /* 0=6sec/1=60sec/2=10min/3=3hrs */
- pthru->timeout = 2;
-
- pthru->ars = 1;
- pthru->reqsenselen = 14;
- pthru->islogical = 0;
-
- pthru->channel = (adapter->flag & BOARD_40LD) ? 0 : channel;
-
- pthru->target = (adapter->flag & BOARD_40LD) ?
- (channel << 4) | target : target;
-
- pthru->cdblen = cmd->cmd_len;
- pthru->logdrv = cmd->device->lun;
-
- memcpy(pthru->cdb, cmd->cmnd, cmd->cmd_len);
-
- /* Not sure about the direction */
- scb->dma_direction = PCI_DMA_BIDIRECTIONAL;
-
- /* Special Code for Handling READ_CAPA/ INQ using bounce buffers */
- switch (cmd->cmnd[0]) {
- case INQUIRY:
- case READ_CAPACITY:
- if(!(adapter->flag & (1L << cmd->device->channel))) {
-
- dev_notice(&adapter->dev->dev,
- "scsi%d: scanning scsi channel %d [P%d] "
- "for physical devices\n",
- adapter->host->host_no,
- cmd->device->channel, channel);
-
- adapter->flag |= (1L << cmd->device->channel);
- }
- /* Fall through */
- default:
- pthru->numsgelements = mega_build_sglist(adapter, scb,
- &pthru->dataxferaddr, &pthru->dataxferlen);
- break;
- }
- return pthru;
-}
-
-
-/**
- * mega_prepare_extpassthru()
- * @adapter - pointer to our soft state
- * @scb - our scsi control block
- * @cmd - scsi command from the mid-layer
- * @channel - actual channel on the controller
- * @target - actual id on the controller.
- *
- * prepare a command for the scsi physical devices. This rountine prepares
- * commands for devices which can take extended CDBs (>10 bytes)
- */
-static mega_ext_passthru *
-mega_prepare_extpassthru(adapter_t *adapter, scb_t *scb, Scsi_Cmnd *cmd,
- int channel, int target)
-{
- mega_ext_passthru *epthru;
-
- epthru = scb->epthru;
- memset(epthru, 0, sizeof(mega_ext_passthru));
-
- /* 0=6sec/1=60sec/2=10min/3=3hrs */
- epthru->timeout = 2;
-
- epthru->ars = 1;
- epthru->reqsenselen = 14;
- epthru->islogical = 0;
-
- epthru->channel = (adapter->flag & BOARD_40LD) ? 0 : channel;
- epthru->target = (adapter->flag & BOARD_40LD) ?
- (channel << 4) | target : target;
-
- epthru->cdblen = cmd->cmd_len;
- epthru->logdrv = cmd->device->lun;
-
- memcpy(epthru->cdb, cmd->cmnd, cmd->cmd_len);
-
- /* Not sure about the direction */
- scb->dma_direction = PCI_DMA_BIDIRECTIONAL;
-
- switch(cmd->cmnd[0]) {
- case INQUIRY:
- case READ_CAPACITY:
- if(!(adapter->flag & (1L << cmd->device->channel))) {
-
- dev_notice(&adapter->dev->dev,
- "scsi%d: scanning scsi channel %d [P%d] "
- "for physical devices\n",
- adapter->host->host_no,
- cmd->device->channel, channel);
-
- adapter->flag |= (1L << cmd->device->channel);
- }
- /* Fall through */
- default:
- epthru->numsgelements = mega_build_sglist(adapter, scb,
- &epthru->dataxferaddr, &epthru->dataxferlen);
- break;
- }
-
- return epthru;
-}
-
-static void
-__mega_runpendq(adapter_t *adapter)
-{
- scb_t *scb;
- struct list_head *pos, *next;
-
- /* Issue any pending commands to the card */
- list_for_each_safe(pos, next, &adapter->pending_list) {
-
- scb = list_entry(pos, scb_t, list);
-
- if( !(scb->state & SCB_ISSUED) ) {
-
- if( issue_scb(adapter, scb) != 0 )
- return;
- }
- }
-
- return;
-}
-
-
-/**
- * issue_scb()
- * @adapter - pointer to our soft state
- * @scb - scsi control block
- *
- * Post a command to the card if the mailbox is available, otherwise return
- * busy. We also take the scb from the pending list if the mailbox is
- * available.
- */
-static int
-issue_scb(adapter_t *adapter, scb_t *scb)
-{
- volatile mbox64_t *mbox64 = adapter->mbox64;
- volatile mbox_t *mbox = adapter->mbox;
- unsigned int i = 0;
-
- if(unlikely(mbox->m_in.busy)) {
- do {
- udelay(1);
- i++;
- } while( mbox->m_in.busy && (i < max_mbox_busy_wait) );
-
- if(mbox->m_in.busy) return -1;
- }
-
- /* Copy mailbox data into host structure */
- memcpy((char *)&mbox->m_out, (char *)scb->raw_mbox,
- sizeof(struct mbox_out));
-
- mbox->m_out.cmdid = scb->idx; /* Set cmdid */
- mbox->m_in.busy = 1; /* Set busy */
-
-
- /*
- * Increment the pending queue counter
- */
- atomic_inc(&adapter->pend_cmds);
-
- switch (mbox->m_out.cmd) {
- case MEGA_MBOXCMD_LREAD64:
- case MEGA_MBOXCMD_LWRITE64:
- case MEGA_MBOXCMD_PASSTHRU64:
- case MEGA_MBOXCMD_EXTPTHRU:
- mbox64->xfer_segment_lo = mbox->m_out.xferaddr;
- mbox64->xfer_segment_hi = 0;
- mbox->m_out.xferaddr = 0xFFFFFFFF;
- break;
- default:
- mbox64->xfer_segment_lo = 0;
- mbox64->xfer_segment_hi = 0;
- }
-
- /*
- * post the command
- */
- scb->state |= SCB_ISSUED;
-
- if( likely(adapter->flag & BOARD_MEMMAP) ) {
- mbox->m_in.poll = 0;
- mbox->m_in.ack = 0;
- WRINDOOR(adapter, adapter->mbox_dma | 0x1);
- }
- else {
- irq_enable(adapter);
- issue_command(adapter);
- }
-
- return 0;
-}
-
-/*
- * Wait until the controller's mailbox is available
- */
-static inline int
-mega_busywait_mbox (adapter_t *adapter)
-{
- if (adapter->mbox->m_in.busy)
- return __mega_busywait_mbox(adapter);
- return 0;
-}
-
-/**
- * issue_scb_block()
- * @adapter - pointer to our soft state
- * @raw_mbox - the mailbox
- *
- * Issue a scb in synchronous and non-interrupt mode
- */
-static int
-issue_scb_block(adapter_t *adapter, u_char *raw_mbox)
-{
- volatile mbox64_t *mbox64 = adapter->mbox64;
- volatile mbox_t *mbox = adapter->mbox;
- u8 byte;
-
- /* Wait until mailbox is free */
- if(mega_busywait_mbox (adapter))
- goto bug_blocked_mailbox;
-
- /* Copy mailbox data into host structure */
- memcpy((char *) mbox, raw_mbox, sizeof(struct mbox_out));
- mbox->m_out.cmdid = 0xFE;
- mbox->m_in.busy = 1;
-
- switch (raw_mbox[0]) {
- case MEGA_MBOXCMD_LREAD64:
- case MEGA_MBOXCMD_LWRITE64:
- case MEGA_MBOXCMD_PASSTHRU64:
- case MEGA_MBOXCMD_EXTPTHRU:
- mbox64->xfer_segment_lo = mbox->m_out.xferaddr;
- mbox64->xfer_segment_hi = 0;
- mbox->m_out.xferaddr = 0xFFFFFFFF;
- break;
- default:
- mbox64->xfer_segment_lo = 0;
- mbox64->xfer_segment_hi = 0;
- }
-
- if( likely(adapter->flag & BOARD_MEMMAP) ) {
- mbox->m_in.poll = 0;
- mbox->m_in.ack = 0;
- mbox->m_in.numstatus = 0xFF;
- mbox->m_in.status = 0xFF;
- WRINDOOR(adapter, adapter->mbox_dma | 0x1);
-
- while((volatile u8)mbox->m_in.numstatus == 0xFF)
- cpu_relax();
-
- mbox->m_in.numstatus = 0xFF;
-
- while( (volatile u8)mbox->m_in.poll != 0x77 )
- cpu_relax();
-
- mbox->m_in.poll = 0;
- mbox->m_in.ack = 0x77;
-
- WRINDOOR(adapter, adapter->mbox_dma | 0x2);
-
- while(RDINDOOR(adapter) & 0x2)
- cpu_relax();
- }
- else {
- irq_disable(adapter);
- issue_command(adapter);
-
- while (!((byte = irq_state(adapter)) & INTR_VALID))
- cpu_relax();
-
- set_irq_state(adapter, byte);
- irq_enable(adapter);
- irq_ack(adapter);
- }
-
- return mbox->m_in.status;
-
-bug_blocked_mailbox:
- dev_warn(&adapter->dev->dev, "Blocked mailbox......!!\n");
- udelay (1000);
- return -1;
-}
-
-
-/**
- * megaraid_isr_iomapped()
- * @irq - irq
- * @devp - pointer to our soft state
- *
- * Interrupt service routine for io-mapped controllers.
- * Find out if our device is interrupting. If yes, acknowledge the interrupt
- * and service the completed commands.
- */
-static irqreturn_t
-megaraid_isr_iomapped(int irq, void *devp)
-{
- adapter_t *adapter = devp;
- unsigned long flags;
- u8 status;
- u8 nstatus;
- u8 completed[MAX_FIRMWARE_STATUS];
- u8 byte;
- int handled = 0;
-
-
- /*
- * loop till F/W has more commands for us to complete.
- */
- spin_lock_irqsave(&adapter->lock, flags);
-
- do {
- /* Check if a valid interrupt is pending */
- byte = irq_state(adapter);
- if( (byte & VALID_INTR_BYTE) == 0 ) {
- /*
- * No more pending commands
- */
- goto out_unlock;
- }
- set_irq_state(adapter, byte);
-
- while((nstatus = (volatile u8)adapter->mbox->m_in.numstatus)
- == 0xFF)
- cpu_relax();
- adapter->mbox->m_in.numstatus = 0xFF;
-
- status = adapter->mbox->m_in.status;
-
- /*
- * decrement the pending queue counter
- */
- atomic_sub(nstatus, &adapter->pend_cmds);
-
- memcpy(completed, (void *)adapter->mbox->m_in.completed,
- nstatus);
-
- /* Acknowledge interrupt */
- irq_ack(adapter);
-
- mega_cmd_done(adapter, completed, nstatus, status);
-
- mega_rundoneq(adapter);
-
- handled = 1;
-
- /* Loop through any pending requests */
- if(atomic_read(&adapter->quiescent) == 0) {
- mega_runpendq(adapter);
- }
-
- } while(1);
-
- out_unlock:
-
- spin_unlock_irqrestore(&adapter->lock, flags);
-
- return IRQ_RETVAL(handled);
-}
-
-
-/**
- * megaraid_isr_memmapped()
- * @irq - irq
- * @devp - pointer to our soft state
- *
- * Interrupt service routine for memory-mapped controllers.
- * Find out if our device is interrupting. If yes, acknowledge the interrupt
- * and service the completed commands.
- */
-static irqreturn_t
-megaraid_isr_memmapped(int irq, void *devp)
-{
- adapter_t *adapter = devp;
- unsigned long flags;
- u8 status;
- u32 dword = 0;
- u8 nstatus;
- u8 completed[MAX_FIRMWARE_STATUS];
- int handled = 0;
-
-
- /*
- * loop till F/W has more commands for us to complete.
- */
- spin_lock_irqsave(&adapter->lock, flags);
-
- do {
- /* Check if a valid interrupt is pending */
- dword = RDOUTDOOR(adapter);
- if(dword != 0x10001234) {
- /*
- * No more pending commands
- */
- goto out_unlock;
- }
- WROUTDOOR(adapter, 0x10001234);
-
- while((nstatus = (volatile u8)adapter->mbox->m_in.numstatus)
- == 0xFF) {
- cpu_relax();
- }
- adapter->mbox->m_in.numstatus = 0xFF;
-
- status = adapter->mbox->m_in.status;
-
- /*
- * decrement the pending queue counter
- */
- atomic_sub(nstatus, &adapter->pend_cmds);
-
- memcpy(completed, (void *)adapter->mbox->m_in.completed,
- nstatus);
-
- /* Acknowledge interrupt */
- WRINDOOR(adapter, 0x2);
-
- handled = 1;
-
- while( RDINDOOR(adapter) & 0x02 )
- cpu_relax();
-
- mega_cmd_done(adapter, completed, nstatus, status);
-
- mega_rundoneq(adapter);
-
- /* Loop through any pending requests */
- if(atomic_read(&adapter->quiescent) == 0) {
- mega_runpendq(adapter);
- }
-
- } while(1);
-
- out_unlock:
-
- spin_unlock_irqrestore(&adapter->lock, flags);
-
- return IRQ_RETVAL(handled);
-}
-/**
- * mega_cmd_done()
- * @adapter - pointer to our soft state
- * @completed - array of ids of completed commands
- * @nstatus - number of completed commands
- * @status - status of the last command completed
- *
- * Complete the commands and call the scsi mid-layer callback hooks.
- */
-static void
-mega_cmd_done(adapter_t *adapter, u8 completed[], int nstatus, int status)
-{
- mega_ext_passthru *epthru = NULL;
- struct scatterlist *sgl;
- Scsi_Cmnd *cmd = NULL;
- mega_passthru *pthru = NULL;
- mbox_t *mbox = NULL;
- u8 c;
- scb_t *scb;
- int islogical;
- int cmdid;
- int i;
-
- /*
- * for all the commands completed, call the mid-layer callback routine
- * and free the scb.
- */
- for( i = 0; i < nstatus; i++ ) {
-
- cmdid = completed[i];
-
- /*
- * Only free SCBs for the commands coming down from the
- * mid-layer, not for which were issued internally
- *
- * For internal command, restore the status returned by the
- * firmware so that user can interpret it.
- */
- if (cmdid == CMDID_INT_CMDS) {
- scb = &adapter->int_scb;
-
- list_del_init(&scb->list);
- scb->state = SCB_FREE;
-
- adapter->int_status = status;
- complete(&adapter->int_waitq);
- } else {
- scb = &adapter->scb_list[cmdid];
-
- /*
- * Make sure f/w has completed a valid command
- */
- if( !(scb->state & SCB_ISSUED) || scb->cmd == NULL ) {
- dev_crit(&adapter->dev->dev, "invalid command "
- "Id %d, scb->state:%x, scsi cmd:%p\n",
- cmdid, scb->state, scb->cmd);
-
- continue;
- }
-
- /*
- * Was a abort issued for this command
- */
- if( scb->state & SCB_ABORT ) {
-
- dev_warn(&adapter->dev->dev,
- "aborted cmd [%x] complete\n",
- scb->idx);
-
- scb->cmd->result = (DID_ABORT << 16);
-
- list_add_tail(SCSI_LIST(scb->cmd),
- &adapter->completed_list);
-
- mega_free_scb(adapter, scb);
-
- continue;
- }
-
- /*
- * Was a reset issued for this command
- */
- if( scb->state & SCB_RESET ) {
-
- dev_warn(&adapter->dev->dev,
- "reset cmd [%x] complete\n",
- scb->idx);
-
- scb->cmd->result = (DID_RESET << 16);
-
- list_add_tail(SCSI_LIST(scb->cmd),
- &adapter->completed_list);
-
- mega_free_scb (adapter, scb);
-
- continue;
- }
-
- cmd = scb->cmd;
- pthru = scb->pthru;
- epthru = scb->epthru;
- mbox = (mbox_t *)scb->raw_mbox;
-
-#if MEGA_HAVE_STATS
- {
-
- int logdrv = mbox->m_out.logdrv;
-
- islogical = adapter->logdrv_chan[cmd->channel];
- /*
- * Maintain an error counter for the logical drive.
- * Some application like SNMP agent need such
- * statistics
- */
- if( status && islogical && (cmd->cmnd[0] == READ_6 ||
- cmd->cmnd[0] == READ_10 ||
- cmd->cmnd[0] == READ_12)) {
- /*
- * Logical drive number increases by 0x80 when
- * a logical drive is deleted
- */
- adapter->rd_errors[logdrv%0x80]++;
- }
-
- if( status && islogical && (cmd->cmnd[0] == WRITE_6 ||
- cmd->cmnd[0] == WRITE_10 ||
- cmd->cmnd[0] == WRITE_12)) {
- /*
- * Logical drive number increases by 0x80 when
- * a logical drive is deleted
- */
- adapter->wr_errors[logdrv%0x80]++;
- }
-
- }
-#endif
- }
-
- /*
- * Do not return the presence of hard disk on the channel so,
- * inquiry sent, and returned data==hard disk or removable
- * hard disk and not logical, request should return failure! -
- * PJ
- */
- islogical = adapter->logdrv_chan[cmd->device->channel];
- if( cmd->cmnd[0] == INQUIRY && !islogical ) {
-
- sgl = scsi_sglist(cmd);
- if( sg_page(sgl) ) {
- c = *(unsigned char *) sg_virt(&sgl[0]);
- } else {
- dev_warn(&adapter->dev->dev, "invalid sg\n");
- c = 0;
- }
-
- if(IS_RAID_CH(adapter, cmd->device->channel) &&
- ((c & 0x1F ) == TYPE_DISK)) {
- status = 0xF0;
- }
- }
-
- /* clear result; otherwise, success returns corrupt value */
- cmd->result = 0;
-
- /* Convert MegaRAID status to Linux error code */
- switch (status) {
- case 0x00: /* SUCCESS , i.e. SCSI_STATUS_GOOD */
- cmd->result |= (DID_OK << 16);
- break;
-
- case 0x02: /* ERROR_ABORTED, i.e.
- SCSI_STATUS_CHECK_CONDITION */
-
- /* set sense_buffer and result fields */
- if( mbox->m_out.cmd == MEGA_MBOXCMD_PASSTHRU ||
- mbox->m_out.cmd == MEGA_MBOXCMD_PASSTHRU64 ) {
-
- memcpy(cmd->sense_buffer, pthru->reqsensearea,
- 14);
-
- cmd->result = (DRIVER_SENSE << 24) |
- (DID_OK << 16) |
- (CHECK_CONDITION << 1);
- }
- else {
- if (mbox->m_out.cmd == MEGA_MBOXCMD_EXTPTHRU) {
-
- memcpy(cmd->sense_buffer,
- epthru->reqsensearea, 14);
-
- cmd->result = (DRIVER_SENSE << 24) |
- (DID_OK << 16) |
- (CHECK_CONDITION << 1);
- } else {
- cmd->sense_buffer[0] = 0x70;
- cmd->sense_buffer[2] = ABORTED_COMMAND;
- cmd->result |= (CHECK_CONDITION << 1);
- }
- }
- break;
-
- case 0x08: /* ERR_DEST_DRIVE_FAILED, i.e.
- SCSI_STATUS_BUSY */
- cmd->result |= (DID_BUS_BUSY << 16) | status;
- break;
-
- default:
-#if MEGA_HAVE_CLUSTERING
- /*
- * If TEST_UNIT_READY fails, we know
- * MEGA_RESERVATION_STATUS failed
- */
- if( cmd->cmnd[0] == TEST_UNIT_READY ) {
- cmd->result |= (DID_ERROR << 16) |
- (RESERVATION_CONFLICT << 1);
- }
- else
- /*
- * Error code returned is 1 if Reserve or Release
- * failed or the input parameter is invalid
- */
- if( status == 1 &&
- (cmd->cmnd[0] == RESERVE ||
- cmd->cmnd[0] == RELEASE) ) {
-
- cmd->result |= (DID_ERROR << 16) |
- (RESERVATION_CONFLICT << 1);
- }
- else
-#endif
- cmd->result |= (DID_BAD_TARGET << 16)|status;
- }
-
- mega_free_scb(adapter, scb);
-
- /* Add Scsi_Command to end of completed queue */
- list_add_tail(SCSI_LIST(cmd), &adapter->completed_list);
- }
-}
-
-
-/*
- * mega_runpendq()
- *
- * Run through the list of completed requests and finish it
- */
-static void
-mega_rundoneq (adapter_t *adapter)
-{
- Scsi_Cmnd *cmd;
- struct list_head *pos;
-
- list_for_each(pos, &adapter->completed_list) {
-
- struct scsi_pointer* spos = (struct scsi_pointer *)pos;
-
- cmd = list_entry(spos, Scsi_Cmnd, SCp);
- cmd->scsi_done(cmd);
- }
-
- INIT_LIST_HEAD(&adapter->completed_list);
-}
-
-
-/*
- * Free a SCB structure
- * Note: We assume the scsi commands associated with this scb is not free yet.
- */
-static void
-mega_free_scb(adapter_t *adapter, scb_t *scb)
-{
- switch( scb->dma_type ) {
-
- case MEGA_DMA_TYPE_NONE:
- break;
-
- case MEGA_SGLIST:
- scsi_dma_unmap(scb->cmd);
- break;
- default:
- break;
- }
-
- /*
- * Remove from the pending list
- */
- list_del_init(&scb->list);
-
- /* Link the scb back into free list */
- scb->state = SCB_FREE;
- scb->cmd = NULL;
-
- list_add(&scb->list, &adapter->free_list);
-}
-
-
-static int
-__mega_busywait_mbox (adapter_t *adapter)
-{
- volatile mbox_t *mbox = adapter->mbox;
- long counter;
-
- for (counter = 0; counter < 10000; counter++) {
- if (!mbox->m_in.busy)
- return 0;
- udelay(100);
- cond_resched();
- }
- return -1; /* give up after 1 second */
-}
-
-/*
- * Copies data to SGLIST
- * Note: For 64 bit cards, we need a minimum of one SG element for read/write
- */
-static int
-mega_build_sglist(adapter_t *adapter, scb_t *scb, u32 *buf, u32 *len)
-{
- struct scatterlist *sg;
- Scsi_Cmnd *cmd;
- int sgcnt;
- int idx;
-
- cmd = scb->cmd;
-
- /*
- * Copy Scatter-Gather list info into controller structure.
- *
- * The number of sg elements returned must not exceed our limit
- */
- sgcnt = scsi_dma_map(cmd);
-
- scb->dma_type = MEGA_SGLIST;
-
- BUG_ON(sgcnt > adapter->sglen || sgcnt < 0);
-
- *len = 0;
-
- if (scsi_sg_count(cmd) == 1 && !adapter->has_64bit_addr) {
- sg = scsi_sglist(cmd);
- scb->dma_h_bulkdata = sg_dma_address(sg);
- *buf = (u32)scb->dma_h_bulkdata;
- *len = sg_dma_len(sg);
- return 0;
- }
-
- scsi_for_each_sg(cmd, sg, sgcnt, idx) {
- if (adapter->has_64bit_addr) {
- scb->sgl64[idx].address = sg_dma_address(sg);
- *len += scb->sgl64[idx].length = sg_dma_len(sg);
- } else {
- scb->sgl[idx].address = sg_dma_address(sg);
- *len += scb->sgl[idx].length = sg_dma_len(sg);
- }
- }
-
- /* Reset pointer and length fields */
- *buf = scb->sgl_dma_addr;
-
- /* Return count of SG requests */
- return sgcnt;
-}
-
-
-/*
- * mega_8_to_40ld()
- *
- * takes all info in AdapterInquiry structure and puts it into ProductInfo and
- * Enquiry3 structures for later use
- */
-static void
-mega_8_to_40ld(mraid_inquiry *inquiry, mega_inquiry3 *enquiry3,
- mega_product_info *product_info)
-{
- int i;
-
- product_info->max_commands = inquiry->adapter_info.max_commands;
- enquiry3->rebuild_rate = inquiry->adapter_info.rebuild_rate;
- product_info->nchannels = inquiry->adapter_info.nchannels;
-
- for (i = 0; i < 4; i++) {
- product_info->fw_version[i] =
- inquiry->adapter_info.fw_version[i];
-
- product_info->bios_version[i] =
- inquiry->adapter_info.bios_version[i];
- }
- enquiry3->cache_flush_interval =
- inquiry->adapter_info.cache_flush_interval;
-
- product_info->dram_size = inquiry->adapter_info.dram_size;
-
- enquiry3->num_ldrv = inquiry->logdrv_info.num_ldrv;
-
- for (i = 0; i < MAX_LOGICAL_DRIVES_8LD; i++) {
- enquiry3->ldrv_size[i] = inquiry->logdrv_info.ldrv_size[i];
- enquiry3->ldrv_prop[i] = inquiry->logdrv_info.ldrv_prop[i];
- enquiry3->ldrv_state[i] = inquiry->logdrv_info.ldrv_state[i];
- }
-
- for (i = 0; i < (MAX_PHYSICAL_DRIVES); i++)
- enquiry3->pdrv_state[i] = inquiry->pdrv_info.pdrv_state[i];
-}
-
-static inline void
-mega_free_sgl(adapter_t *adapter)
-{
- scb_t *scb;
- int i;
-
- for(i = 0; i < adapter->max_cmds; i++) {
-
- scb = &adapter->scb_list[i];
-
- if( scb->sgl64 ) {
- pci_free_consistent(adapter->dev,
- sizeof(mega_sgl64) * adapter->sglen,
- scb->sgl64,
- scb->sgl_dma_addr);
-
- scb->sgl64 = NULL;
- }
-
- if( scb->pthru ) {
- pci_free_consistent(adapter->dev, sizeof(mega_passthru),
- scb->pthru, scb->pthru_dma_addr);
-
- scb->pthru = NULL;
- }
-
- if( scb->epthru ) {
- pci_free_consistent(adapter->dev,
- sizeof(mega_ext_passthru),
- scb->epthru, scb->epthru_dma_addr);
-
- scb->epthru = NULL;
- }
-
- }
-}
-
-
-/*
- * Get information about the card/driver
- */
-const char *
-megaraid_info(struct Scsi_Host *host)
-{
- static char buffer[512];
- adapter_t *adapter;
-
- adapter = (adapter_t *)host->hostdata;
-
- sprintf (buffer,
- "LSI Logic MegaRAID %s %d commands %d targs %d chans %d luns",
- adapter->fw_version, adapter->product_info.max_commands,
- adapter->host->max_id, adapter->host->max_channel,
- (u32)adapter->host->max_lun);
- return buffer;
-}
-
-/*
- * Abort a previous SCSI request. Only commands on the pending list can be
- * aborted. All the commands issued to the F/W must complete.
- */
-static int
-megaraid_abort(Scsi_Cmnd *cmd)
-{
- adapter_t *adapter;
- int rval;
-
- adapter = (adapter_t *)cmd->device->host->hostdata;
-
- rval = megaraid_abort_and_reset(adapter, cmd, SCB_ABORT);
-
- /*
- * This is required here to complete any completed requests
- * to be communicated over to the mid layer.
- */
- mega_rundoneq(adapter);
-
- return rval;
-}
-
-
-static int
-megaraid_reset(struct scsi_cmnd *cmd)
-{
- adapter_t *adapter;
- megacmd_t mc;
- int rval;
-
- adapter = (adapter_t *)cmd->device->host->hostdata;
-
-#if MEGA_HAVE_CLUSTERING
- mc.cmd = MEGA_CLUSTER_CMD;
- mc.opcode = MEGA_RESET_RESERVATIONS;
-
- if( mega_internal_command(adapter, &mc, NULL) != 0 ) {
- dev_warn(&adapter->dev->dev, "reservation reset failed\n");
- }
- else {
- dev_info(&adapter->dev->dev, "reservation reset\n");
- }
-#endif
-
- spin_lock_irq(&adapter->lock);
-
- rval = megaraid_abort_and_reset(adapter, cmd, SCB_RESET);
-
- /*
- * This is required here to complete any completed requests
- * to be communicated over to the mid layer.
- */
- mega_rundoneq(adapter);
- spin_unlock_irq(&adapter->lock);
-
- return rval;
-}
-
-/**
- * megaraid_abort_and_reset()
- * @adapter - megaraid soft state
- * @cmd - scsi command to be aborted or reset
- * @aor - abort or reset flag
- *
- * Try to locate the scsi command in the pending queue. If found and is not
- * issued to the controller, abort/reset it. Otherwise return failure
- */
-static int
-megaraid_abort_and_reset(adapter_t *adapter, Scsi_Cmnd *cmd, int aor)
-{
- struct list_head *pos, *next;
- scb_t *scb;
-
- dev_warn(&adapter->dev->dev, "%s cmd=%x <c=%d t=%d l=%d>\n",
- (aor == SCB_ABORT)? "ABORTING":"RESET",
- cmd->cmnd[0], cmd->device->channel,
- cmd->device->id, (u32)cmd->device->lun);
-
- if(list_empty(&adapter->pending_list))
- return FAILED;
-
- list_for_each_safe(pos, next, &adapter->pending_list) {
-
- scb = list_entry(pos, scb_t, list);
-
- if (scb->cmd == cmd) { /* Found command */
-
- scb->state |= aor;
-
- /*
- * Check if this command has firmware ownership. If
- * yes, we cannot reset this command. Whenever f/w
- * completes this command, we will return appropriate
- * status from ISR.
- */
- if( scb->state & SCB_ISSUED ) {
-
- dev_warn(&adapter->dev->dev,
- "%s[%x], fw owner\n",
- (aor==SCB_ABORT) ? "ABORTING":"RESET",
- scb->idx);
-
- return FAILED;
- }
- else {
-
- /*
- * Not yet issued! Remove from the pending
- * list
- */
- dev_warn(&adapter->dev->dev,
- "%s-[%x], driver owner\n",
- (aor==SCB_ABORT) ? "ABORTING":"RESET",
- scb->idx);
-
- mega_free_scb(adapter, scb);
-
- if( aor == SCB_ABORT ) {
- cmd->result = (DID_ABORT << 16);
- }
- else {
- cmd->result = (DID_RESET << 16);
- }
-
- list_add_tail(SCSI_LIST(cmd),
- &adapter->completed_list);
-
- return SUCCESS;
- }
- }
- }
-
- return FAILED;
-}
-
-static inline int
-make_local_pdev(adapter_t *adapter, struct pci_dev **pdev)
-{
- *pdev = pci_alloc_dev(NULL);
-
- if( *pdev == NULL ) return -1;
-
- memcpy(*pdev, adapter->dev, sizeof(struct pci_dev));
-
- if( pci_set_dma_mask(*pdev, DMA_BIT_MASK(32)) != 0 ) {
- kfree(*pdev);
- return -1;
- }
-
- return 0;
-}
-
-static inline void
-free_local_pdev(struct pci_dev *pdev)
-{
- kfree(pdev);
-}
-
-/**
- * mega_allocate_inquiry()
- * @dma_handle - handle returned for dma address
- * @pdev - handle to pci device
- *
- * allocates memory for inquiry structure
- */
-static inline void *
-mega_allocate_inquiry(dma_addr_t *dma_handle, struct pci_dev *pdev)
-{
- return pci_alloc_consistent(pdev, sizeof(mega_inquiry3), dma_handle);
-}
-
-
-static inline void
-mega_free_inquiry(void *inquiry, dma_addr_t dma_handle, struct pci_dev *pdev)
-{
- pci_free_consistent(pdev, sizeof(mega_inquiry3), inquiry, dma_handle);
-}
-
-
-#ifdef CONFIG_PROC_FS
-/* Following code handles /proc fs */
-
-/**
- * proc_show_config()
- * @m - Synthetic file construction data
- * @v - File iterator
- *
- * Display configuration information about the controller.
- */
-static int
-proc_show_config(struct seq_file *m, void *v)
-{
-
- adapter_t *adapter = m->private;
-
- seq_puts(m, MEGARAID_VERSION);
- if(adapter->product_info.product_name[0])
- seq_printf(m, "%s\n", adapter->product_info.product_name);
-
- seq_puts(m, "Controller Type: ");
-
- if( adapter->flag & BOARD_MEMMAP )
- seq_puts(m, "438/466/467/471/493/518/520/531/532\n");
- else
- seq_puts(m, "418/428/434\n");
-
- if(adapter->flag & BOARD_40LD)
- seq_puts(m, "Controller Supports 40 Logical Drives\n");
-
- if(adapter->flag & BOARD_64BIT)
- seq_puts(m, "Controller capable of 64-bit memory addressing\n");
- if( adapter->has_64bit_addr )
- seq_puts(m, "Controller using 64-bit memory addressing\n");
- else
- seq_puts(m, "Controller is not using 64-bit memory addressing\n");
-
- seq_printf(m, "Base = %08lx, Irq = %d, ",
- adapter->base, adapter->host->irq);
-
- seq_printf(m, "Logical Drives = %d, Channels = %d\n",
- adapter->numldrv, adapter->product_info.nchannels);
-
- seq_printf(m, "Version =%s:%s, DRAM = %dMb\n",
- adapter->fw_version, adapter->bios_version,
- adapter->product_info.dram_size);
-
- seq_printf(m, "Controller Queue Depth = %d, Driver Queue Depth = %d\n",
- adapter->product_info.max_commands, adapter->max_cmds);
-
- seq_printf(m, "support_ext_cdb = %d\n", adapter->support_ext_cdb);
- seq_printf(m, "support_random_del = %d\n", adapter->support_random_del);
- seq_printf(m, "boot_ldrv_enabled = %d\n", adapter->boot_ldrv_enabled);
- seq_printf(m, "boot_ldrv = %d\n", adapter->boot_ldrv);
- seq_printf(m, "boot_pdrv_enabled = %d\n", adapter->boot_pdrv_enabled);
- seq_printf(m, "boot_pdrv_ch = %d\n", adapter->boot_pdrv_ch);
- seq_printf(m, "boot_pdrv_tgt = %d\n", adapter->boot_pdrv_tgt);
- seq_printf(m, "quiescent = %d\n",
- atomic_read(&adapter->quiescent));
- seq_printf(m, "has_cluster = %d\n", adapter->has_cluster);
-
- seq_puts(m, "\nModule Parameters:\n");
- seq_printf(m, "max_cmd_per_lun = %d\n", max_cmd_per_lun);
- seq_printf(m, "max_sectors_per_io = %d\n", max_sectors_per_io);
- return 0;
-}
-
-/**
- * proc_show_stat()
- * @m - Synthetic file construction data
- * @v - File iterator
- *
- * Display statistical information about the I/O activity.
- */
-static int
-proc_show_stat(struct seq_file *m, void *v)
-{
- adapter_t *adapter = m->private;
-#if MEGA_HAVE_STATS
- int i;
-#endif
-
- seq_puts(m, "Statistical Information for this controller\n");
- seq_printf(m, "pend_cmds = %d\n", atomic_read(&adapter->pend_cmds));
-#if MEGA_HAVE_STATS
- for(i = 0; i < adapter->numldrv; i++) {
- seq_printf(m, "Logical Drive %d:\n", i);
- seq_printf(m, "\tReads Issued = %lu, Writes Issued = %lu\n",
- adapter->nreads[i], adapter->nwrites[i]);
- seq_printf(m, "\tSectors Read = %lu, Sectors Written = %lu\n",
- adapter->nreadblocks[i], adapter->nwriteblocks[i]);
- seq_printf(m, "\tRead errors = %lu, Write errors = %lu\n\n",
- adapter->rd_errors[i], adapter->wr_errors[i]);
- }
-#else
- seq_puts(m, "IO and error counters not compiled in driver.\n");
-#endif
- return 0;
-}
-
-
-/**
- * proc_show_mbox()
- * @m - Synthetic file construction data
- * @v - File iterator
- *
- * Display mailbox information for the last command issued. This information
- * is good for debugging.
- */
-static int
-proc_show_mbox(struct seq_file *m, void *v)
-{
- adapter_t *adapter = m->private;
- volatile mbox_t *mbox = adapter->mbox;
-
- seq_puts(m, "Contents of Mail Box Structure\n");
- seq_printf(m, " Fw Command = 0x%02x\n", mbox->m_out.cmd);
- seq_printf(m, " Cmd Sequence = 0x%02x\n", mbox->m_out.cmdid);
- seq_printf(m, " No of Sectors= %04d\n", mbox->m_out.numsectors);
- seq_printf(m, " LBA = 0x%02x\n", mbox->m_out.lba);
- seq_printf(m, " DTA = 0x%08x\n", mbox->m_out.xferaddr);
- seq_printf(m, " Logical Drive= 0x%02x\n", mbox->m_out.logdrv);
- seq_printf(m, " No of SG Elmt= 0x%02x\n", mbox->m_out.numsgelements);
- seq_printf(m, " Busy = %01x\n", mbox->m_in.busy);
- seq_printf(m, " Status = 0x%02x\n", mbox->m_in.status);
- return 0;
-}
-
-
-/**
- * proc_show_rebuild_rate()
- * @m - Synthetic file construction data
- * @v - File iterator
- *
- * Display current rebuild rate
- */
-static int
-proc_show_rebuild_rate(struct seq_file *m, void *v)
-{
- adapter_t *adapter = m->private;
- dma_addr_t dma_handle;
- caddr_t inquiry;
- struct pci_dev *pdev;
-
- if( make_local_pdev(adapter, &pdev) != 0 )
- return 0;
-
- if( (inquiry = mega_allocate_inquiry(&dma_handle, pdev)) == NULL )
- goto free_pdev;
-
- if( mega_adapinq(adapter, dma_handle) != 0 ) {
- seq_puts(m, "Adapter inquiry failed.\n");
- dev_warn(&adapter->dev->dev, "inquiry failed\n");
- goto free_inquiry;
- }
-
- if( adapter->flag & BOARD_40LD )
- seq_printf(m, "Rebuild Rate: [%d%%]\n",
- ((mega_inquiry3 *)inquiry)->rebuild_rate);
- else
- seq_printf(m, "Rebuild Rate: [%d%%]\n",
- ((mraid_ext_inquiry *)
- inquiry)->raid_inq.adapter_info.rebuild_rate);
-
-free_inquiry:
- mega_free_inquiry(inquiry, dma_handle, pdev);
-free_pdev:
- free_local_pdev(pdev);
- return 0;
-}
-
-
-/**
- * proc_show_battery()
- * @m - Synthetic file construction data
- * @v - File iterator
- *
- * Display information about the battery module on the controller.
- */
-static int
-proc_show_battery(struct seq_file *m, void *v)
-{
- adapter_t *adapter = m->private;
- dma_addr_t dma_handle;
- caddr_t inquiry;
- struct pci_dev *pdev;
- u8 battery_status;
-
- if( make_local_pdev(adapter, &pdev) != 0 )
- return 0;
-
- if( (inquiry = mega_allocate_inquiry(&dma_handle, pdev)) == NULL )
- goto free_pdev;
-
- if( mega_adapinq(adapter, dma_handle) != 0 ) {
- seq_puts(m, "Adapter inquiry failed.\n");
- dev_warn(&adapter->dev->dev, "inquiry failed\n");
- goto free_inquiry;
- }
-
- if( adapter->flag & BOARD_40LD ) {
- battery_status = ((mega_inquiry3 *)inquiry)->battery_status;
- }
- else {
- battery_status = ((mraid_ext_inquiry *)inquiry)->
- raid_inq.adapter_info.battery_status;
- }
-
- /*
- * Decode the battery status
- */
- seq_printf(m, "Battery Status:[%d]", battery_status);
-
- if(battery_status == MEGA_BATT_CHARGE_DONE)
- seq_puts(m, " Charge Done");
-
- if(battery_status & MEGA_BATT_MODULE_MISSING)
- seq_puts(m, " Module Missing");
-
- if(battery_status & MEGA_BATT_LOW_VOLTAGE)
- seq_puts(m, " Low Voltage");
-
- if(battery_status & MEGA_BATT_TEMP_HIGH)
- seq_puts(m, " Temperature High");
-
- if(battery_status & MEGA_BATT_PACK_MISSING)
- seq_puts(m, " Pack Missing");
-
- if(battery_status & MEGA_BATT_CHARGE_INPROG)
- seq_puts(m, " Charge In-progress");
-
- if(battery_status & MEGA_BATT_CHARGE_FAIL)
- seq_puts(m, " Charge Fail");
-
- if(battery_status & MEGA_BATT_CYCLES_EXCEEDED)
- seq_puts(m, " Cycles Exceeded");
-
- seq_putc(m, '\n');
-
-free_inquiry:
- mega_free_inquiry(inquiry, dma_handle, pdev);
-free_pdev:
- free_local_pdev(pdev);
- return 0;
-}
-
-
-/*
- * Display scsi inquiry
- */
-static void
-mega_print_inquiry(struct seq_file *m, char *scsi_inq)
-{
- int i;
-
- seq_puts(m, " Vendor: ");
- seq_write(m, scsi_inq + 8, 8);
- seq_puts(m, " Model: ");
- seq_write(m, scsi_inq + 16, 16);
- seq_puts(m, " Rev: ");
- seq_write(m, scsi_inq + 32, 4);
- seq_putc(m, '\n');
-
- i = scsi_inq[0] & 0x1f;
- seq_printf(m, " Type: %s ", scsi_device_type(i));
-
- seq_printf(m, " ANSI SCSI revision: %02x",
- scsi_inq[2] & 0x07);
-
- if( (scsi_inq[2] & 0x07) == 1 && (scsi_inq[3] & 0x0f) == 1 )
- seq_puts(m, " CCS\n");
- else
- seq_putc(m, '\n');
-}
-
-/**
- * proc_show_pdrv()
- * @m - Synthetic file construction data
- * @page - buffer to write the data in
- * @adapter - pointer to our soft state
- *
- * Display information about the physical drives.
- */
-static int
-proc_show_pdrv(struct seq_file *m, adapter_t *adapter, int channel)
-{
- dma_addr_t dma_handle;
- char *scsi_inq;
- dma_addr_t scsi_inq_dma_handle;
- caddr_t inquiry;
- struct pci_dev *pdev;
- u8 *pdrv_state;
- u8 state;
- int tgt;
- int max_channels;
- int i;
-
- if( make_local_pdev(adapter, &pdev) != 0 )
- return 0;
-
- if( (inquiry = mega_allocate_inquiry(&dma_handle, pdev)) == NULL )
- goto free_pdev;
-
- if( mega_adapinq(adapter, dma_handle) != 0 ) {
- seq_puts(m, "Adapter inquiry failed.\n");
- dev_warn(&adapter->dev->dev, "inquiry failed\n");
- goto free_inquiry;
- }
-
-
- scsi_inq = pci_alloc_consistent(pdev, 256, &scsi_inq_dma_handle);
- if( scsi_inq == NULL ) {
- seq_puts(m, "memory not available for scsi inq.\n");
- goto free_inquiry;
- }
-
- if( adapter->flag & BOARD_40LD ) {
- pdrv_state = ((mega_inquiry3 *)inquiry)->pdrv_state;
- }
- else {
- pdrv_state = ((mraid_ext_inquiry *)inquiry)->
- raid_inq.pdrv_info.pdrv_state;
- }
-
- max_channels = adapter->product_info.nchannels;
-
- if( channel >= max_channels ) {
- goto free_pci;
- }
-
- for( tgt = 0; tgt <= MAX_TARGET; tgt++ ) {
-
- i = channel*16 + tgt;
-
- state = *(pdrv_state + i);
- switch( state & 0x0F ) {
- case PDRV_ONLINE:
- seq_printf(m, "Channel:%2d Id:%2d State: Online",
- channel, tgt);
- break;
-
- case PDRV_FAILED:
- seq_printf(m, "Channel:%2d Id:%2d State: Failed",
- channel, tgt);
- break;
-
- case PDRV_RBLD:
- seq_printf(m, "Channel:%2d Id:%2d State: Rebuild",
- channel, tgt);
- break;
-
- case PDRV_HOTSPARE:
- seq_printf(m, "Channel:%2d Id:%2d State: Hot spare",
- channel, tgt);
- break;
-
- default:
- seq_printf(m, "Channel:%2d Id:%2d State: Un-configured",
- channel, tgt);
- break;
- }
-
- /*
- * This interface displays inquiries for disk drives
- * only. Inquries for logical drives and non-disk
- * devices are available through /proc/scsi/scsi
- */
- memset(scsi_inq, 0, 256);
- if( mega_internal_dev_inquiry(adapter, channel, tgt,
- scsi_inq_dma_handle) ||
- (scsi_inq[0] & 0x1F) != TYPE_DISK ) {
- continue;
- }
-
- /*
- * Check for overflow. We print less than 240
- * characters for inquiry
- */
- seq_puts(m, ".\n");
- mega_print_inquiry(m, scsi_inq);
- }
-
-free_pci:
- pci_free_consistent(pdev, 256, scsi_inq, scsi_inq_dma_handle);
-free_inquiry:
- mega_free_inquiry(inquiry, dma_handle, pdev);
-free_pdev:
- free_local_pdev(pdev);
- return 0;
-}
-
-/**
- * proc_show_pdrv_ch0()
- * @m - Synthetic file construction data
- * @v - File iterator
- *
- * Display information about the physical drives on physical channel 0.
- */
-static int
-proc_show_pdrv_ch0(struct seq_file *m, void *v)
-{
- return proc_show_pdrv(m, m->private, 0);
-}
-
-
-/**
- * proc_show_pdrv_ch1()
- * @m - Synthetic file construction data
- * @v - File iterator
- *
- * Display information about the physical drives on physical channel 1.
- */
-static int
-proc_show_pdrv_ch1(struct seq_file *m, void *v)
-{
- return proc_show_pdrv(m, m->private, 1);
-}
-
-
-/**
- * proc_show_pdrv_ch2()
- * @m - Synthetic file construction data
- * @v - File iterator
- *
- * Display information about the physical drives on physical channel 2.
- */
-static int
-proc_show_pdrv_ch2(struct seq_file *m, void *v)
-{
- return proc_show_pdrv(m, m->private, 2);
-}
-
-
-/**
- * proc_show_pdrv_ch3()
- * @m - Synthetic file construction data
- * @v - File iterator
- *
- * Display information about the physical drives on physical channel 3.
- */
-static int
-proc_show_pdrv_ch3(struct seq_file *m, void *v)
-{
- return proc_show_pdrv(m, m->private, 3);
-}
-
-
-/**
- * proc_show_rdrv()
- * @m - Synthetic file construction data
- * @adapter - pointer to our soft state
- * @start - starting logical drive to display
- * @end - ending logical drive to display
- *
- * We do not print the inquiry information since its already available through
- * /proc/scsi/scsi interface
- */
-static int
-proc_show_rdrv(struct seq_file *m, adapter_t *adapter, int start, int end )
-{
- dma_addr_t dma_handle;
- logdrv_param *lparam;
- megacmd_t mc;
- char *disk_array;
- dma_addr_t disk_array_dma_handle;
- caddr_t inquiry;
- struct pci_dev *pdev;
- u8 *rdrv_state;
- int num_ldrv;
- u32 array_sz;
- int i;
-
- if( make_local_pdev(adapter, &pdev) != 0 )
- return 0;
-
- if( (inquiry = mega_allocate_inquiry(&dma_handle, pdev)) == NULL )
- goto free_pdev;
-
- if( mega_adapinq(adapter, dma_handle) != 0 ) {
- seq_puts(m, "Adapter inquiry failed.\n");
- dev_warn(&adapter->dev->dev, "inquiry failed\n");
- goto free_inquiry;
- }
-
- memset(&mc, 0, sizeof(megacmd_t));
-
- if( adapter->flag & BOARD_40LD ) {
- array_sz = sizeof(disk_array_40ld);
-
- rdrv_state = ((mega_inquiry3 *)inquiry)->ldrv_state;
-
- num_ldrv = ((mega_inquiry3 *)inquiry)->num_ldrv;
- }
- else {
- array_sz = sizeof(disk_array_8ld);
-
- rdrv_state = ((mraid_ext_inquiry *)inquiry)->
- raid_inq.logdrv_info.ldrv_state;
-
- num_ldrv = ((mraid_ext_inquiry *)inquiry)->
- raid_inq.logdrv_info.num_ldrv;
- }
-
- disk_array = pci_alloc_consistent(pdev, array_sz,
- &disk_array_dma_handle);
-
- if( disk_array == NULL ) {
- seq_puts(m, "memory not available.\n");
- goto free_inquiry;
- }
-
- mc.xferaddr = (u32)disk_array_dma_handle;
-
- if( adapter->flag & BOARD_40LD ) {
- mc.cmd = FC_NEW_CONFIG;
- mc.opcode = OP_DCMD_READ_CONFIG;
-
- if( mega_internal_command(adapter, &mc, NULL) ) {
- seq_puts(m, "40LD read config failed.\n");
- goto free_pci;
- }
-
- }
- else {
- mc.cmd = NEW_READ_CONFIG_8LD;
-
- if( mega_internal_command(adapter, &mc, NULL) ) {
- mc.cmd = READ_CONFIG_8LD;
- if( mega_internal_command(adapter, &mc, NULL) ) {
- seq_puts(m, "8LD read config failed.\n");
- goto free_pci;
- }
- }
- }
-
- for( i = start; i < ( (end+1 < num_ldrv) ? end+1 : num_ldrv ); i++ ) {
-
- if( adapter->flag & BOARD_40LD ) {
- lparam =
- &((disk_array_40ld *)disk_array)->ldrv[i].lparam;
- }
- else {
- lparam =
- &((disk_array_8ld *)disk_array)->ldrv[i].lparam;
- }
-
- /*
- * Check for overflow. We print less than 240 characters for
- * information about each logical drive.
- */
- seq_printf(m, "Logical drive:%2d:, ", i);
-
- switch( rdrv_state[i] & 0x0F ) {
- case RDRV_OFFLINE:
- seq_puts(m, "state: offline");
- break;
- case RDRV_DEGRADED:
- seq_puts(m, "state: degraded");
- break;
- case RDRV_OPTIMAL:
- seq_puts(m, "state: optimal");
- break;
- case RDRV_DELETED:
- seq_puts(m, "state: deleted");
- break;
- default:
- seq_puts(m, "state: unknown");
- break;
- }
-
- /*
- * Check if check consistency or initialization is going on
- * for this logical drive.
- */
- if( (rdrv_state[i] & 0xF0) == 0x20 )
- seq_puts(m, ", check-consistency in progress");
- else if( (rdrv_state[i] & 0xF0) == 0x10 )
- seq_puts(m, ", initialization in progress");
-
- seq_putc(m, '\n');
-
- seq_printf(m, "Span depth:%3d, ", lparam->span_depth);
- seq_printf(m, "RAID level:%3d, ", lparam->level);
- seq_printf(m, "Stripe size:%3d, ",
- lparam->stripe_sz ? lparam->stripe_sz/2: 128);
- seq_printf(m, "Row size:%3d\n", lparam->row_size);
-
- seq_puts(m, "Read Policy: ");
- switch(lparam->read_ahead) {
- case NO_READ_AHEAD:
- seq_puts(m, "No read ahead, ");
- break;
- case READ_AHEAD:
- seq_puts(m, "Read ahead, ");
- break;
- case ADAP_READ_AHEAD:
- seq_puts(m, "Adaptive, ");
- break;
-
- }
-
- seq_puts(m, "Write Policy: ");
- switch(lparam->write_mode) {
- case WRMODE_WRITE_THRU:
- seq_puts(m, "Write thru, ");
- break;
- case WRMODE_WRITE_BACK:
- seq_puts(m, "Write back, ");
- break;
- }
-
- seq_puts(m, "Cache Policy: ");
- switch(lparam->direct_io) {
- case CACHED_IO:
- seq_puts(m, "Cached IO\n\n");
- break;
- case DIRECT_IO:
- seq_puts(m, "Direct IO\n\n");
- break;
- }
- }
-
-free_pci:
- pci_free_consistent(pdev, array_sz, disk_array,
- disk_array_dma_handle);
-free_inquiry:
- mega_free_inquiry(inquiry, dma_handle, pdev);
-free_pdev:
- free_local_pdev(pdev);
- return 0;
-}
-
-/**
- * proc_show_rdrv_10()
- * @m - Synthetic file construction data
- * @v - File iterator
- *
- * Display real time information about the logical drives 0 through 9.
- */
-static int
-proc_show_rdrv_10(struct seq_file *m, void *v)
-{
- return proc_show_rdrv(m, m->private, 0, 9);
-}
-
-
-/**
- * proc_show_rdrv_20()
- * @m - Synthetic file construction data
- * @v - File iterator
- *
- * Display real time information about the logical drives 0 through 9.
- */
-static int
-proc_show_rdrv_20(struct seq_file *m, void *v)
-{
- return proc_show_rdrv(m, m->private, 10, 19);
-}
-
-
-/**
- * proc_show_rdrv_30()
- * @m - Synthetic file construction data
- * @v - File iterator
- *
- * Display real time information about the logical drives 0 through 9.
- */
-static int
-proc_show_rdrv_30(struct seq_file *m, void *v)
-{
- return proc_show_rdrv(m, m->private, 20, 29);
-}
-
-
-/**
- * proc_show_rdrv_40()
- * @m - Synthetic file construction data
- * @v - File iterator
- *
- * Display real time information about the logical drives 0 through 9.
- */
-static int
-proc_show_rdrv_40(struct seq_file *m, void *v)
-{
- return proc_show_rdrv(m, m->private, 30, 39);
-}
-
-
-/*
- * seq_file wrappers for procfile show routines.
- */
-static int mega_proc_open(struct inode *inode, struct file *file)
-{
- adapter_t *adapter = proc_get_parent_data(inode);
- int (*show)(struct seq_file *, void *) = PDE_DATA(inode);
-
- return single_open(file, show, adapter);
-}
-
-static const struct file_operations mega_proc_fops = {
- .open = mega_proc_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
-};
-
-/*
- * Table of proc files we need to create.
- */
-struct mega_proc_file {
- const char *name;
- unsigned short ptr_offset;
- int (*show) (struct seq_file *m, void *v);
-};
-
-static const struct mega_proc_file mega_proc_files[] = {
- { "config", offsetof(adapter_t, proc_read), proc_show_config },
- { "stat", offsetof(adapter_t, proc_stat), proc_show_stat },
- { "mailbox", offsetof(adapter_t, proc_mbox), proc_show_mbox },
-#if MEGA_HAVE_ENH_PROC
- { "rebuild-rate", offsetof(adapter_t, proc_rr), proc_show_rebuild_rate },
- { "battery-status", offsetof(adapter_t, proc_battery), proc_show_battery },
- { "diskdrives-ch0", offsetof(adapter_t, proc_pdrvstat[0]), proc_show_pdrv_ch0 },
- { "diskdrives-ch1", offsetof(adapter_t, proc_pdrvstat[1]), proc_show_pdrv_ch1 },
- { "diskdrives-ch2", offsetof(adapter_t, proc_pdrvstat[2]), proc_show_pdrv_ch2 },
- { "diskdrives-ch3", offsetof(adapter_t, proc_pdrvstat[3]), proc_show_pdrv_ch3 },
- { "raiddrives-0-9", offsetof(adapter_t, proc_rdrvstat[0]), proc_show_rdrv_10 },
- { "raiddrives-10-19", offsetof(adapter_t, proc_rdrvstat[1]), proc_show_rdrv_20 },
- { "raiddrives-20-29", offsetof(adapter_t, proc_rdrvstat[2]), proc_show_rdrv_30 },
- { "raiddrives-30-39", offsetof(adapter_t, proc_rdrvstat[3]), proc_show_rdrv_40 },
-#endif
- { NULL }
-};
-
-/**
- * mega_create_proc_entry()
- * @index - index in soft state array
- * @parent - parent node for this /proc entry
- *
- * Creates /proc entries for our controllers.
- */
-static void
-mega_create_proc_entry(int index, struct proc_dir_entry *parent)
-{
- const struct mega_proc_file *f;
- adapter_t *adapter = hba_soft_state[index];
- struct proc_dir_entry *dir, *de, **ppde;
- u8 string[16];
-
- sprintf(string, "hba%d", adapter->host->host_no);
-
- dir = adapter->controller_proc_dir_entry =
- proc_mkdir_data(string, 0, parent, adapter);
- if(!dir) {
- dev_warn(&adapter->dev->dev, "proc_mkdir failed\n");
- return;
- }
-
- for (f = mega_proc_files; f->name; f++) {
- de = proc_create_data(f->name, S_IRUSR, dir, &mega_proc_fops,
- f->show);
- if (!de) {
- dev_warn(&adapter->dev->dev, "proc_create failed\n");
- return;
- }
-
- ppde = (void *)adapter + f->ptr_offset;
- *ppde = de;
- }
-}
-
-#else
-static inline void mega_create_proc_entry(int index, struct proc_dir_entry *parent)
-{
-}
-#endif
-
-
-/**
- * megaraid_biosparam()
- *
- * Return the disk geometry for a particular disk
- */
-static int
-megaraid_biosparam(struct scsi_device *sdev, struct block_device *bdev,
- sector_t capacity, int geom[])
-{
- adapter_t *adapter;
- unsigned char *bh;
- int heads;
- int sectors;
- int cylinders;
- int rval;
-
- /* Get pointer to host config structure */
- adapter = (adapter_t *)sdev->host->hostdata;
-
- if (IS_RAID_CH(adapter, sdev->channel)) {
- /* Default heads (64) & sectors (32) */
- heads = 64;
- sectors = 32;
- cylinders = (ulong)capacity / (heads * sectors);
-
- /*
- * Handle extended translation size for logical drives
- * > 1Gb
- */
- if ((ulong)capacity >= 0x200000) {
- heads = 255;
- sectors = 63;
- cylinders = (ulong)capacity / (heads * sectors);
- }
-
- /* return result */
- geom[0] = heads;
- geom[1] = sectors;
- geom[2] = cylinders;
- }
- else {
- bh = scsi_bios_ptable(bdev);
-
- if( bh ) {
- rval = scsi_partsize(bh, capacity,
- &geom[2], &geom[0], &geom[1]);
- kfree(bh);
- if( rval != -1 )
- return rval;
- }
-
- dev_info(&adapter->dev->dev,
- "invalid partition on this disk on channel %d\n",
- sdev->channel);
-
- /* Default heads (64) & sectors (32) */
- heads = 64;
- sectors = 32;
- cylinders = (ulong)capacity / (heads * sectors);
-
- /* Handle extended translation size for logical drives > 1Gb */
- if ((ulong)capacity >= 0x200000) {
- heads = 255;
- sectors = 63;
- cylinders = (ulong)capacity / (heads * sectors);
- }
-
- /* return result */
- geom[0] = heads;
- geom[1] = sectors;
- geom[2] = cylinders;
- }
-
- return 0;
-}
-
-/**
- * mega_init_scb()
- * @adapter - pointer to our soft state
- *
- * Allocate memory for the various pointers in the scb structures:
- * scatter-gather list pointer, passthru and extended passthru structure
- * pointers.
- */
-static int
-mega_init_scb(adapter_t *adapter)
-{
- scb_t *scb;
- int i;
-
- for( i = 0; i < adapter->max_cmds; i++ ) {
-
- scb = &adapter->scb_list[i];
-
- scb->sgl64 = NULL;
- scb->sgl = NULL;
- scb->pthru = NULL;
- scb->epthru = NULL;
- }
-
- for( i = 0; i < adapter->max_cmds; i++ ) {
-
- scb = &adapter->scb_list[i];
-
- scb->idx = i;
-
- scb->sgl64 = pci_alloc_consistent(adapter->dev,
- sizeof(mega_sgl64) * adapter->sglen,
- &scb->sgl_dma_addr);
-
- scb->sgl = (mega_sglist *)scb->sgl64;
-
- if( !scb->sgl ) {
- dev_warn(&adapter->dev->dev, "RAID: Can't allocate sglist\n");
- mega_free_sgl(adapter);
- return -1;
- }
-
- scb->pthru = pci_alloc_consistent(adapter->dev,
- sizeof(mega_passthru),
- &scb->pthru_dma_addr);
-
- if( !scb->pthru ) {
- dev_warn(&adapter->dev->dev, "RAID: Can't allocate passthru\n");
- mega_free_sgl(adapter);
- return -1;
- }
-
- scb->epthru = pci_alloc_consistent(adapter->dev,
- sizeof(mega_ext_passthru),
- &scb->epthru_dma_addr);
-
- if( !scb->epthru ) {
- dev_warn(&adapter->dev->dev,
- "Can't allocate extended passthru\n");
- mega_free_sgl(adapter);
- return -1;
- }
-
-
- scb->dma_type = MEGA_DMA_TYPE_NONE;
-
- /*
- * Link to free list
- * lock not required since we are loading the driver, so no
- * commands possible right now.
- */
- scb->state = SCB_FREE;
- scb->cmd = NULL;
- list_add(&scb->list, &adapter->free_list);
- }
-
- return 0;
-}
-
-
-/**
- * megadev_open()
- * @inode - unused
- * @filep - unused
- *
- * Routines for the character/ioctl interface to the driver. Find out if this
- * is a valid open.
- */
-static int
-megadev_open (struct inode *inode, struct file *filep)
-{
- /*
- * Only allow superuser to access private ioctl interface
- */
- if( !capable(CAP_SYS_ADMIN) ) return -EACCES;
-
- return 0;
-}
-
-
-/**
- * megadev_ioctl()
- * @inode - Our device inode
- * @filep - unused
- * @cmd - ioctl command
- * @arg - user buffer
- *
- * ioctl entry point for our private ioctl interface. We move the data in from
- * the user space, prepare the command (if necessary, convert the old MIMD
- * ioctl to new ioctl command), and issue a synchronous command to the
- * controller.
- */
-static int
-megadev_ioctl(struct file *filep, unsigned int cmd, unsigned long arg)
-{
- adapter_t *adapter;
- nitioctl_t uioc;
- int adapno;
- int rval;
- mega_passthru __user *upthru; /* user address for passthru */
- mega_passthru *pthru; /* copy user passthru here */
- dma_addr_t pthru_dma_hndl;
- void *data = NULL; /* data to be transferred */
- dma_addr_t data_dma_hndl; /* dma handle for data xfer area */
- megacmd_t mc;
- megastat_t __user *ustats;
- int num_ldrv;
- u32 uxferaddr = 0;
- struct pci_dev *pdev;
-
- ustats = NULL; /* avoid compilation warnings */
- num_ldrv = 0;
-
- /*
- * Make sure only USCSICMD are issued through this interface.
- * MIMD application would still fire different command.
- */
- if( (_IOC_TYPE(cmd) != MEGAIOC_MAGIC) && (cmd != USCSICMD) ) {
- return -EINVAL;
- }
-
- /*
- * Check and convert a possible MIMD command to NIT command.
- * mega_m_to_n() copies the data from the user space, so we do not
- * have to do it here.
- * NOTE: We will need some user address to copyout the data, therefore
- * the inteface layer will also provide us with the required user
- * addresses.
- */
- memset(&uioc, 0, sizeof(nitioctl_t));
- if( (rval = mega_m_to_n( (void __user *)arg, &uioc)) != 0 )
- return rval;
-
-
- switch( uioc.opcode ) {
-
- case GET_DRIVER_VER:
- if( put_user(driver_ver, (u32 __user *)uioc.uioc_uaddr) )
- return (-EFAULT);
-
- break;
-
- case GET_N_ADAP:
- if( put_user(hba_count, (u32 __user *)uioc.uioc_uaddr) )
- return (-EFAULT);
-
- /*
- * Shucks. MIMD interface returns a positive value for number
- * of adapters. TODO: Change it to return 0 when there is no
- * applicatio using mimd interface.
- */
- return hba_count;
-
- case GET_ADAP_INFO:
-
- /*
- * Which adapter
- */
- if( (adapno = GETADAP(uioc.adapno)) >= hba_count )
- return (-ENODEV);
-
- if( copy_to_user(uioc.uioc_uaddr, mcontroller+adapno,
- sizeof(struct mcontroller)) )
- return (-EFAULT);
- break;
-
-#if MEGA_HAVE_STATS
-
- case GET_STATS:
- /*
- * Which adapter
- */
- if( (adapno = GETADAP(uioc.adapno)) >= hba_count )
- return (-ENODEV);
-
- adapter = hba_soft_state[adapno];
-
- ustats = uioc.uioc_uaddr;
-
- if( copy_from_user(&num_ldrv, &ustats->num_ldrv, sizeof(int)) )
- return (-EFAULT);
-
- /*
- * Check for the validity of the logical drive number
- */
- if( num_ldrv >= MAX_LOGICAL_DRIVES_40LD ) return -EINVAL;
-
- if( copy_to_user(ustats->nreads, adapter->nreads,
- num_ldrv*sizeof(u32)) )
- return -EFAULT;
-
- if( copy_to_user(ustats->nreadblocks, adapter->nreadblocks,
- num_ldrv*sizeof(u32)) )
- return -EFAULT;
-
- if( copy_to_user(ustats->nwrites, adapter->nwrites,
- num_ldrv*sizeof(u32)) )
- return -EFAULT;
-
- if( copy_to_user(ustats->nwriteblocks, adapter->nwriteblocks,
- num_ldrv*sizeof(u32)) )
- return -EFAULT;
-
- if( copy_to_user(ustats->rd_errors, adapter->rd_errors,
- num_ldrv*sizeof(u32)) )
- return -EFAULT;
-
- if( copy_to_user(ustats->wr_errors, adapter->wr_errors,
- num_ldrv*sizeof(u32)) )
- return -EFAULT;
-
- return 0;
-
-#endif
- case MBOX_CMD:
-
- /*
- * Which adapter
- */
- if( (adapno = GETADAP(uioc.adapno)) >= hba_count )
- return (-ENODEV);
-
- adapter = hba_soft_state[adapno];
-
- /*
- * Deletion of logical drive is a special case. The adapter
- * should be quiescent before this command is issued.
- */
- if( uioc.uioc_rmbox[0] == FC_DEL_LOGDRV &&
- uioc.uioc_rmbox[2] == OP_DEL_LOGDRV ) {
-
- /*
- * Do we support this feature
- */
- if( !adapter->support_random_del ) {
- dev_warn(&adapter->dev->dev, "logdrv "
- "delete on non-supporting F/W\n");
-
- return (-EINVAL);
- }
-
- rval = mega_del_logdrv( adapter, uioc.uioc_rmbox[3] );
-
- if( rval == 0 ) {
- memset(&mc, 0, sizeof(megacmd_t));
-
- mc.status = rval;
-
- rval = mega_n_to_m((void __user *)arg, &mc);
- }
-
- return rval;
- }
- /*
- * This interface only support the regular passthru commands.
- * Reject extended passthru and 64-bit passthru
- */
- if( uioc.uioc_rmbox[0] == MEGA_MBOXCMD_PASSTHRU64 ||
- uioc.uioc_rmbox[0] == MEGA_MBOXCMD_EXTPTHRU ) {
-
- dev_warn(&adapter->dev->dev, "rejected passthru\n");
-
- return (-EINVAL);
- }
-
- /*
- * For all internal commands, the buffer must be allocated in
- * <4GB address range
- */
- if( make_local_pdev(adapter, &pdev) != 0 )
- return -EIO;
-
- /* Is it a passthru command or a DCMD */
- if( uioc.uioc_rmbox[0] == MEGA_MBOXCMD_PASSTHRU ) {
- /* Passthru commands */
-
- pthru = pci_alloc_consistent(pdev,
- sizeof(mega_passthru),
- &pthru_dma_hndl);
-
- if( pthru == NULL ) {
- free_local_pdev(pdev);
- return (-ENOMEM);
- }
-
- /*
- * The user passthru structure
- */
- upthru = (mega_passthru __user *)(unsigned long)MBOX(uioc)->xferaddr;
-
- /*
- * Copy in the user passthru here.
- */
- if( copy_from_user(pthru, upthru,
- sizeof(mega_passthru)) ) {
-
- pci_free_consistent(pdev,
- sizeof(mega_passthru), pthru,
- pthru_dma_hndl);
-
- free_local_pdev(pdev);
-
- return (-EFAULT);
- }
-
- /*
- * Is there a data transfer
- */
- if( pthru->dataxferlen ) {
- data = pci_alloc_consistent(pdev,
- pthru->dataxferlen,
- &data_dma_hndl);
-
- if( data == NULL ) {
- pci_free_consistent(pdev,
- sizeof(mega_passthru),
- pthru,
- pthru_dma_hndl);
-
- free_local_pdev(pdev);
-
- return (-ENOMEM);
- }
-
- /*
- * Save the user address and point the kernel
- * address at just allocated memory
- */
- uxferaddr = pthru->dataxferaddr;
- pthru->dataxferaddr = data_dma_hndl;
- }
-
-
- /*
- * Is data coming down-stream
- */
- if( pthru->dataxferlen && (uioc.flags & UIOC_WR) ) {
- /*
- * Get the user data
- */
- if( copy_from_user(data, (char __user *)(unsigned long) uxferaddr,
- pthru->dataxferlen) ) {
- rval = (-EFAULT);
- goto freemem_and_return;
- }
- }
-
- memset(&mc, 0, sizeof(megacmd_t));
-
- mc.cmd = MEGA_MBOXCMD_PASSTHRU;
- mc.xferaddr = (u32)pthru_dma_hndl;
-
- /*
- * Issue the command
- */
- mega_internal_command(adapter, &mc, pthru);
-
- rval = mega_n_to_m((void __user *)arg, &mc);
-
- if( rval ) goto freemem_and_return;
-
-
- /*
- * Is data going up-stream
- */
- if( pthru->dataxferlen && (uioc.flags & UIOC_RD) ) {
- if( copy_to_user((char __user *)(unsigned long) uxferaddr, data,
- pthru->dataxferlen) ) {
- rval = (-EFAULT);
- }
- }
-
- /*
- * Send the request sense data also, irrespective of
- * whether the user has asked for it or not.
- */
- if (copy_to_user(upthru->reqsensearea,
- pthru->reqsensearea, 14))
- rval = -EFAULT;
-
-freemem_and_return:
- if( pthru->dataxferlen ) {
- pci_free_consistent(pdev,
- pthru->dataxferlen, data,
- data_dma_hndl);
- }
-
- pci_free_consistent(pdev, sizeof(mega_passthru),
- pthru, pthru_dma_hndl);
-
- free_local_pdev(pdev);
-
- return rval;
- }
- else {
- /* DCMD commands */
-
- /*
- * Is there a data transfer
- */
- if( uioc.xferlen ) {
- data = pci_alloc_consistent(pdev,
- uioc.xferlen, &data_dma_hndl);
-
- if( data == NULL ) {
- free_local_pdev(pdev);
- return (-ENOMEM);
- }
-
- uxferaddr = MBOX(uioc)->xferaddr;
- }
-
- /*
- * Is data coming down-stream
- */
- if( uioc.xferlen && (uioc.flags & UIOC_WR) ) {
- /*
- * Get the user data
- */
- if( copy_from_user(data, (char __user *)(unsigned long) uxferaddr,
- uioc.xferlen) ) {
-
- pci_free_consistent(pdev,
- uioc.xferlen,
- data, data_dma_hndl);
-
- free_local_pdev(pdev);
-
- return (-EFAULT);
- }
- }
-
- memcpy(&mc, MBOX(uioc), sizeof(megacmd_t));
-
- mc.xferaddr = (u32)data_dma_hndl;
-
- /*
- * Issue the command
- */
- mega_internal_command(adapter, &mc, NULL);
-
- rval = mega_n_to_m((void __user *)arg, &mc);
-
- if( rval ) {
- if( uioc.xferlen ) {
- pci_free_consistent(pdev,
- uioc.xferlen, data,
- data_dma_hndl);
- }
-
- free_local_pdev(pdev);
-
- return rval;
- }
-
- /*
- * Is data going up-stream
- */
- if( uioc.xferlen && (uioc.flags & UIOC_RD) ) {
- if( copy_to_user((char __user *)(unsigned long) uxferaddr, data,
- uioc.xferlen) ) {
-
- rval = (-EFAULT);
- }
- }
-
- if( uioc.xferlen ) {
- pci_free_consistent(pdev,
- uioc.xferlen, data,
- data_dma_hndl);
- }
-
- free_local_pdev(pdev);
-
- return rval;
- }
-
- default:
- return (-EINVAL);
- }
-
- return 0;
-}
-
-static long
-megadev_unlocked_ioctl(struct file *filep, unsigned int cmd, unsigned long arg)
-{
- int ret;
-
- mutex_lock(&megadev_mutex);
- ret = megadev_ioctl(filep, cmd, arg);
- mutex_unlock(&megadev_mutex);
-
- return ret;
-}
-
-/**
- * mega_m_to_n()
- * @arg - user address
- * @uioc - new ioctl structure
- *
- * A thin layer to convert older mimd interface ioctl structure to NIT ioctl
- * structure
- *
- * Converts the older mimd ioctl structure to newer NIT structure
- */
-static int
-mega_m_to_n(void __user *arg, nitioctl_t *uioc)
-{
- struct uioctl_t uioc_mimd;
- char signature[8] = {0};
- u8 opcode;
- u8 subopcode;
-
-
- /*
- * check is the application conforms to NIT. We do not have to do much
- * in that case.
- * We exploit the fact that the signature is stored in the very
- * beginning of the structure.
- */
-
- if( copy_from_user(signature, arg, 7) )
- return (-EFAULT);
-
- if( memcmp(signature, "MEGANIT", 7) == 0 ) {
-
- /*
- * NOTE NOTE: The nit ioctl is still under flux because of
- * change of mailbox definition, in HPE. No applications yet
- * use this interface and let's not have applications use this
- * interface till the new specifitions are in place.
- */
- return -EINVAL;
-#if 0
- if( copy_from_user(uioc, arg, sizeof(nitioctl_t)) )
- return (-EFAULT);
- return 0;
-#endif
- }
-
- /*
- * Else assume we have mimd uioctl_t as arg. Convert to nitioctl_t
- *
- * Get the user ioctl structure
- */
- if( copy_from_user(&uioc_mimd, arg, sizeof(struct uioctl_t)) )
- return (-EFAULT);
-
-
- /*
- * Get the opcode and subopcode for the commands
- */
- opcode = uioc_mimd.ui.fcs.opcode;
- subopcode = uioc_mimd.ui.fcs.subopcode;
-
- switch (opcode) {
- case 0x82:
-
- switch (subopcode) {
-
- case MEGAIOC_QDRVRVER: /* Query driver version */
- uioc->opcode = GET_DRIVER_VER;
- uioc->uioc_uaddr = uioc_mimd.data;
- break;
-
- case MEGAIOC_QNADAP: /* Get # of adapters */
- uioc->opcode = GET_N_ADAP;
- uioc->uioc_uaddr = uioc_mimd.data;
- break;
-
- case MEGAIOC_QADAPINFO: /* Get adapter information */
- uioc->opcode = GET_ADAP_INFO;
- uioc->adapno = uioc_mimd.ui.fcs.adapno;
- uioc->uioc_uaddr = uioc_mimd.data;
- break;
-
- default:
- return(-EINVAL);
- }
-
- break;
-
-
- case 0x81:
-
- uioc->opcode = MBOX_CMD;
- uioc->adapno = uioc_mimd.ui.fcs.adapno;
-
- memcpy(uioc->uioc_rmbox, uioc_mimd.mbox, 18);
-
- uioc->xferlen = uioc_mimd.ui.fcs.length;
-
- if( uioc_mimd.outlen ) uioc->flags = UIOC_RD;
- if( uioc_mimd.inlen ) uioc->flags |= UIOC_WR;
-
- break;
-
- case 0x80:
-
- uioc->opcode = MBOX_CMD;
- uioc->adapno = uioc_mimd.ui.fcs.adapno;
-
- memcpy(uioc->uioc_rmbox, uioc_mimd.mbox, 18);
-
- /*
- * Choose the xferlen bigger of input and output data
- */
- uioc->xferlen = uioc_mimd.outlen > uioc_mimd.inlen ?
- uioc_mimd.outlen : uioc_mimd.inlen;
-
- if( uioc_mimd.outlen ) uioc->flags = UIOC_RD;
- if( uioc_mimd.inlen ) uioc->flags |= UIOC_WR;
-
- break;
-
- default:
- return (-EINVAL);
-
- }
-
- return 0;
-}
-
-/*
- * mega_n_to_m()
- * @arg - user address
- * @mc - mailbox command
- *
- * Updates the status information to the application, depending on application
- * conforms to older mimd ioctl interface or newer NIT ioctl interface
- */
-static int
-mega_n_to_m(void __user *arg, megacmd_t *mc)
-{
- nitioctl_t __user *uiocp;
- megacmd_t __user *umc;
- mega_passthru __user *upthru;
- struct uioctl_t __user *uioc_mimd;
- char signature[8] = {0};
-
- /*
- * check is the application conforms to NIT.
- */
- if( copy_from_user(signature, arg, 7) )
- return -EFAULT;
-
- if( memcmp(signature, "MEGANIT", 7) == 0 ) {
-
- uiocp = arg;
-
- if( put_user(mc->status, (u8 __user *)&MBOX_P(uiocp)->status) )
- return (-EFAULT);
-
- if( mc->cmd == MEGA_MBOXCMD_PASSTHRU ) {
-
- umc = MBOX_P(uiocp);
-
- if (get_user(upthru, (mega_passthru __user * __user *)&umc->xferaddr))
- return -EFAULT;
-
- if( put_user(mc->status, (u8 __user *)&upthru->scsistatus))
- return (-EFAULT);
- }
- }
- else {
- uioc_mimd = arg;
-
- if( put_user(mc->status, (u8 __user *)&uioc_mimd->mbox[17]) )
- return (-EFAULT);
-
- if( mc->cmd == MEGA_MBOXCMD_PASSTHRU ) {
-
- umc = (megacmd_t __user *)uioc_mimd->mbox;
-
- if (get_user(upthru, (mega_passthru __user * __user *)&umc->xferaddr))
- return (-EFAULT);
-
- if( put_user(mc->status, (u8 __user *)&upthru->scsistatus) )
- return (-EFAULT);
- }
- }
-
- return 0;
-}
-
-
-/*
- * MEGARAID 'FW' commands.
- */
-
-/**
- * mega_is_bios_enabled()
- * @adapter - pointer to our soft state
- *
- * issue command to find out if the BIOS is enabled for this controller
- */
-static int
-mega_is_bios_enabled(adapter_t *adapter)
-{
- unsigned char raw_mbox[sizeof(struct mbox_out)];
- mbox_t *mbox;
- int ret;
-
- mbox = (mbox_t *)raw_mbox;
-
- memset(&mbox->m_out, 0, sizeof(raw_mbox));
-
- memset((void *)adapter->mega_buffer, 0, MEGA_BUFFER_SIZE);
-
- mbox->m_out.xferaddr = (u32)adapter->buf_dma_handle;
-
- raw_mbox[0] = IS_BIOS_ENABLED;
- raw_mbox[2] = GET_BIOS;
-
-
- ret = issue_scb_block(adapter, raw_mbox);
-
- return *(char *)adapter->mega_buffer;
-}
-
-
-/**
- * mega_enum_raid_scsi()
- * @adapter - pointer to our soft state
- *
- * Find out what channels are RAID/SCSI. This information is used to
- * differentiate the virtual channels and physical channels and to support
- * ROMB feature and non-disk devices.
- */
-static void
-mega_enum_raid_scsi(adapter_t *adapter)
-{
- unsigned char raw_mbox[sizeof(struct mbox_out)];
- mbox_t *mbox;
- int i;
-
- mbox = (mbox_t *)raw_mbox;
-
- memset(&mbox->m_out, 0, sizeof(raw_mbox));
-
- /*
- * issue command to find out what channels are raid/scsi
- */
- raw_mbox[0] = CHNL_CLASS;
- raw_mbox[2] = GET_CHNL_CLASS;
-
- memset((void *)adapter->mega_buffer, 0, MEGA_BUFFER_SIZE);
-
- mbox->m_out.xferaddr = (u32)adapter->buf_dma_handle;
-
- /*
- * Non-ROMB firmware fail this command, so all channels
- * must be shown RAID
- */
- adapter->mega_ch_class = 0xFF;
-
- if(!issue_scb_block(adapter, raw_mbox)) {
- adapter->mega_ch_class = *((char *)adapter->mega_buffer);
-
- }
-
- for( i = 0; i < adapter->product_info.nchannels; i++ ) {
- if( (adapter->mega_ch_class >> i) & 0x01 ) {
- dev_info(&adapter->dev->dev, "channel[%d] is raid\n",
- i);
- }
- else {
- dev_info(&adapter->dev->dev, "channel[%d] is scsi\n",
- i);
- }
- }
-
- return;
-}
-
-
-/**
- * mega_get_boot_drv()
- * @adapter - pointer to our soft state
- *
- * Find out which device is the boot device. Note, any logical drive or any
- * phyical device (e.g., a CDROM) can be designated as a boot device.
- */
-static void
-mega_get_boot_drv(adapter_t *adapter)
-{
- struct private_bios_data *prv_bios_data;
- unsigned char raw_mbox[sizeof(struct mbox_out)];
- mbox_t *mbox;
- u16 cksum = 0;
- u8 *cksum_p;
- u8 boot_pdrv;
- int i;
-
- mbox = (mbox_t *)raw_mbox;
-
- memset(&mbox->m_out, 0, sizeof(raw_mbox));
-
- raw_mbox[0] = BIOS_PVT_DATA;
- raw_mbox[2] = GET_BIOS_PVT_DATA;
-
- memset((void *)adapter->mega_buffer, 0, MEGA_BUFFER_SIZE);
-
- mbox->m_out.xferaddr = (u32)adapter->buf_dma_handle;
-
- adapter->boot_ldrv_enabled = 0;
- adapter->boot_ldrv = 0;
-
- adapter->boot_pdrv_enabled = 0;
- adapter->boot_pdrv_ch = 0;
- adapter->boot_pdrv_tgt = 0;
-
- if(issue_scb_block(adapter, raw_mbox) == 0) {
- prv_bios_data =
- (struct private_bios_data *)adapter->mega_buffer;
-
- cksum = 0;
- cksum_p = (char *)prv_bios_data;
- for (i = 0; i < 14; i++ ) {
- cksum += (u16)(*cksum_p++);
- }
-
- if (prv_bios_data->cksum == (u16)(0-cksum) ) {
-
- /*
- * If MSB is set, a physical drive is set as boot
- * device
- */
- if( prv_bios_data->boot_drv & 0x80 ) {
- adapter->boot_pdrv_enabled = 1;
- boot_pdrv = prv_bios_data->boot_drv & 0x7F;
- adapter->boot_pdrv_ch = boot_pdrv / 16;
- adapter->boot_pdrv_tgt = boot_pdrv % 16;
- }
- else {
- adapter->boot_ldrv_enabled = 1;
- adapter->boot_ldrv = prv_bios_data->boot_drv;
- }
- }
- }
-
-}
-
-/**
- * mega_support_random_del()
- * @adapter - pointer to our soft state
- *
- * Find out if this controller supports random deletion and addition of
- * logical drives
- */
-static int
-mega_support_random_del(adapter_t *adapter)
-{
- unsigned char raw_mbox[sizeof(struct mbox_out)];
- mbox_t *mbox;
- int rval;
-
- mbox = (mbox_t *)raw_mbox;
-
- memset(&mbox->m_out, 0, sizeof(raw_mbox));
-
- /*
- * issue command
- */
- raw_mbox[0] = FC_DEL_LOGDRV;
- raw_mbox[2] = OP_SUP_DEL_LOGDRV;
-
- rval = issue_scb_block(adapter, raw_mbox);
-
- return !rval;
-}
-
-
-/**
- * mega_support_ext_cdb()
- * @adapter - pointer to our soft state
- *
- * Find out if this firmware support cdblen > 10
- */
-static int
-mega_support_ext_cdb(adapter_t *adapter)
-{
- unsigned char raw_mbox[sizeof(struct mbox_out)];
- mbox_t *mbox;
- int rval;
-
- mbox = (mbox_t *)raw_mbox;
-
- memset(&mbox->m_out, 0, sizeof(raw_mbox));
- /*
- * issue command to find out if controller supports extended CDBs.
- */
- raw_mbox[0] = 0xA4;
- raw_mbox[2] = 0x16;
-
- rval = issue_scb_block(adapter, raw_mbox);
-
- return !rval;
-}
-
-
-/**
- * mega_del_logdrv()
- * @adapter - pointer to our soft state
- * @logdrv - logical drive to be deleted
- *
- * Delete the specified logical drive. It is the responsibility of the user
- * app to let the OS know about this operation.
- */
-static int
-mega_del_logdrv(adapter_t *adapter, int logdrv)
-{
- unsigned long flags;
- scb_t *scb;
- int rval;
-
- /*
- * Stop sending commands to the controller, queue them internally.
- * When deletion is complete, ISR will flush the queue.
- */
- atomic_set(&adapter->quiescent, 1);
-
- /*
- * Wait till all the issued commands are complete and there are no
- * commands in the pending queue
- */
- while (atomic_read(&adapter->pend_cmds) > 0 ||
- !list_empty(&adapter->pending_list))
- msleep(1000); /* sleep for 1s */
-
- rval = mega_do_del_logdrv(adapter, logdrv);
-
- spin_lock_irqsave(&adapter->lock, flags);
-
- /*
- * If delete operation was successful, add 0x80 to the logical drive
- * ids for commands in the pending queue.
- */
- if (adapter->read_ldidmap) {
- struct list_head *pos;
- list_for_each(pos, &adapter->pending_list) {
- scb = list_entry(pos, scb_t, list);
- if (scb->pthru->logdrv < 0x80 )
- scb->pthru->logdrv += 0x80;
- }
- }
-
- atomic_set(&adapter->quiescent, 0);
-
- mega_runpendq(adapter);
-
- spin_unlock_irqrestore(&adapter->lock, flags);
-
- return rval;
-}
-
-
-static int
-mega_do_del_logdrv(adapter_t *adapter, int logdrv)
-{
- megacmd_t mc;
- int rval;
-
- memset( &mc, 0, sizeof(megacmd_t));
-
- mc.cmd = FC_DEL_LOGDRV;
- mc.opcode = OP_DEL_LOGDRV;
- mc.subopcode = logdrv;
-
- rval = mega_internal_command(adapter, &mc, NULL);
-
- /* log this event */
- if(rval) {
- dev_warn(&adapter->dev->dev, "Delete LD-%d failed", logdrv);
- return rval;
- }
-
- /*
- * After deleting first logical drive, the logical drives must be
- * addressed by adding 0x80 to the logical drive id.
- */
- adapter->read_ldidmap = 1;
-
- return rval;
-}
-
-
-/**
- * mega_get_max_sgl()
- * @adapter - pointer to our soft state
- *
- * Find out the maximum number of scatter-gather elements supported by this
- * version of the firmware
- */
-static void
-mega_get_max_sgl(adapter_t *adapter)
-{
- unsigned char raw_mbox[sizeof(struct mbox_out)];
- mbox_t *mbox;
-
- mbox = (mbox_t *)raw_mbox;
-
- memset(mbox, 0, sizeof(raw_mbox));
-
- memset((void *)adapter->mega_buffer, 0, MEGA_BUFFER_SIZE);
-
- mbox->m_out.xferaddr = (u32)adapter->buf_dma_handle;
-
- raw_mbox[0] = MAIN_MISC_OPCODE;
- raw_mbox[2] = GET_MAX_SG_SUPPORT;
-
-
- if( issue_scb_block(adapter, raw_mbox) ) {
- /*
- * f/w does not support this command. Choose the default value
- */
- adapter->sglen = MIN_SGLIST;
- }
- else {
- adapter->sglen = *((char *)adapter->mega_buffer);
-
- /*
- * Make sure this is not more than the resources we are
- * planning to allocate
- */
- if ( adapter->sglen > MAX_SGLIST )
- adapter->sglen = MAX_SGLIST;
- }
-
- return;
-}
-
-
-/**
- * mega_support_cluster()
- * @adapter - pointer to our soft state
- *
- * Find out if this firmware support cluster calls.
- */
-static int
-mega_support_cluster(adapter_t *adapter)
-{
- unsigned char raw_mbox[sizeof(struct mbox_out)];
- mbox_t *mbox;
-
- mbox = (mbox_t *)raw_mbox;
-
- memset(mbox, 0, sizeof(raw_mbox));
-
- memset((void *)adapter->mega_buffer, 0, MEGA_BUFFER_SIZE);
-
- mbox->m_out.xferaddr = (u32)adapter->buf_dma_handle;
-
- /*
- * Try to get the initiator id. This command will succeed iff the
- * clustering is available on this HBA.
- */
- raw_mbox[0] = MEGA_GET_TARGET_ID;
-
- if( issue_scb_block(adapter, raw_mbox) == 0 ) {
-
- /*
- * Cluster support available. Get the initiator target id.
- * Tell our id to mid-layer too.
- */
- adapter->this_id = *(u32 *)adapter->mega_buffer;
- adapter->host->this_id = adapter->this_id;
-
- return 1;
- }
-
- return 0;
-}
-
-#ifdef CONFIG_PROC_FS
-/**
- * mega_adapinq()
- * @adapter - pointer to our soft state
- * @dma_handle - DMA address of the buffer
- *
- * Issue internal commands while interrupts are available.
- * We only issue direct mailbox commands from within the driver. ioctl()
- * interface using these routines can issue passthru commands.
- */
-static int
-mega_adapinq(adapter_t *adapter, dma_addr_t dma_handle)
-{
- megacmd_t mc;
-
- memset(&mc, 0, sizeof(megacmd_t));
-
- if( adapter->flag & BOARD_40LD ) {
- mc.cmd = FC_NEW_CONFIG;
- mc.opcode = NC_SUBOP_ENQUIRY3;
- mc.subopcode = ENQ3_GET_SOLICITED_FULL;
- }
- else {
- mc.cmd = MEGA_MBOXCMD_ADPEXTINQ;
- }
-
- mc.xferaddr = (u32)dma_handle;
-
- if ( mega_internal_command(adapter, &mc, NULL) != 0 ) {
- return -1;
- }
-
- return 0;
-}
-
-
-/** mega_internal_dev_inquiry()
- * @adapter - pointer to our soft state
- * @ch - channel for this device
- * @tgt - ID of this device
- * @buf_dma_handle - DMA address of the buffer
- *
- * Issue the scsi inquiry for the specified device.
- */
-static int
-mega_internal_dev_inquiry(adapter_t *adapter, u8 ch, u8 tgt,
- dma_addr_t buf_dma_handle)
-{
- mega_passthru *pthru;
- dma_addr_t pthru_dma_handle;
- megacmd_t mc;
- int rval;
- struct pci_dev *pdev;
-
-
- /*
- * For all internal commands, the buffer must be allocated in <4GB
- * address range
- */
- if( make_local_pdev(adapter, &pdev) != 0 ) return -1;
-
- pthru = pci_alloc_consistent(pdev, sizeof(mega_passthru),
- &pthru_dma_handle);
-
- if( pthru == NULL ) {
- free_local_pdev(pdev);
- return -1;
- }
-
- pthru->timeout = 2;
- pthru->ars = 1;
- pthru->reqsenselen = 14;
- pthru->islogical = 0;
-
- pthru->channel = (adapter->flag & BOARD_40LD) ? 0 : ch;
-
- pthru->target = (adapter->flag & BOARD_40LD) ? (ch << 4)|tgt : tgt;
-
- pthru->cdblen = 6;
-
- pthru->cdb[0] = INQUIRY;
- pthru->cdb[1] = 0;
- pthru->cdb[2] = 0;
- pthru->cdb[3] = 0;
- pthru->cdb[4] = 255;
- pthru->cdb[5] = 0;
-
-
- pthru->dataxferaddr = (u32)buf_dma_handle;
- pthru->dataxferlen = 256;
-
- memset(&mc, 0, sizeof(megacmd_t));
-
- mc.cmd = MEGA_MBOXCMD_PASSTHRU;
- mc.xferaddr = (u32)pthru_dma_handle;
-
- rval = mega_internal_command(adapter, &mc, pthru);
-
- pci_free_consistent(pdev, sizeof(mega_passthru), pthru,
- pthru_dma_handle);
-
- free_local_pdev(pdev);
-
- return rval;
-}
-#endif
-
-/**
- * mega_internal_command()
- * @adapter - pointer to our soft state
- * @mc - the mailbox command
- * @pthru - Passthru structure for DCDB commands
- *
- * Issue the internal commands in interrupt mode.
- * The last argument is the address of the passthru structure if the command
- * to be fired is a passthru command
- *
- * Note: parameter 'pthru' is null for non-passthru commands.
- */
-static int
-mega_internal_command(adapter_t *adapter, megacmd_t *mc, mega_passthru *pthru)
-{
- unsigned long flags;
- scb_t *scb;
- int rval;
-
- /*
- * The internal commands share one command id and hence are
- * serialized. This is so because we want to reserve maximum number of
- * available command ids for the I/O commands.
- */
- mutex_lock(&adapter->int_mtx);
-
- scb = &adapter->int_scb;
- memset(scb, 0, sizeof(scb_t));
-
- scb->idx = CMDID_INT_CMDS;
- scb->state |= SCB_ACTIVE | SCB_PENDQ;
-
- memcpy(scb->raw_mbox, mc, sizeof(megacmd_t));
-
- /*
- * Is it a passthru command
- */
- if (mc->cmd == MEGA_MBOXCMD_PASSTHRU)
- scb->pthru = pthru;
-
- spin_lock_irqsave(&adapter->lock, flags);
- list_add_tail(&scb->list, &adapter->pending_list);
- /*
- * Check if the HBA is in quiescent state, e.g., during a
- * delete logical drive opertion. If it is, don't run
- * the pending_list.
- */
- if (atomic_read(&adapter->quiescent) == 0)
- mega_runpendq(adapter);
- spin_unlock_irqrestore(&adapter->lock, flags);
-
- wait_for_completion(&adapter->int_waitq);
-
- mc->status = rval = adapter->int_status;
-
- /*
- * Print a debug message for all failed commands. Applications can use
- * this information.
- */
- if (rval && trace_level) {
- dev_info(&adapter->dev->dev, "cmd [%x, %x, %x] status:[%x]\n",
- mc->cmd, mc->opcode, mc->subopcode, rval);
- }
-
- mutex_unlock(&adapter->int_mtx);
- return rval;
-}
-
-static struct scsi_host_template megaraid_template = {
- .module = THIS_MODULE,
- .name = "MegaRAID",
- .proc_name = "megaraid_legacy",
- .info = megaraid_info,
- .queuecommand = megaraid_queue,
- .bios_param = megaraid_biosparam,
- .max_sectors = MAX_SECTORS_PER_IO,
- .can_queue = MAX_COMMANDS,
- .this_id = DEFAULT_INITIATOR_ID,
- .sg_tablesize = MAX_SGLIST,
- .cmd_per_lun = DEF_CMD_PER_LUN,
- .use_clustering = ENABLE_CLUSTERING,
- .eh_abort_handler = megaraid_abort,
- .eh_device_reset_handler = megaraid_reset,
- .eh_bus_reset_handler = megaraid_reset,
- .eh_host_reset_handler = megaraid_reset,
- .no_write_same = 1,
-};
-
-static int
-megaraid_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
-{
- struct Scsi_Host *host;
- adapter_t *adapter;
- unsigned long mega_baseport, tbase, flag = 0;
- u16 subsysid, subsysvid;
- u8 pci_bus, pci_dev_func;
- int irq, i, j;
- int error = -ENODEV;
-
- if (pci_enable_device(pdev))
- goto out;
- pci_set_master(pdev);
-
- pci_bus = pdev->bus->number;
- pci_dev_func = pdev->devfn;
-
- /*
- * The megaraid3 stuff reports the ID of the Intel part which is not
- * remotely specific to the megaraid
- */
- if (pdev->vendor == PCI_VENDOR_ID_INTEL) {
- u16 magic;
- /*
- * Don't fall over the Compaq management cards using the same
- * PCI identifier
- */
- if (pdev->subsystem_vendor == PCI_VENDOR_ID_COMPAQ &&
- pdev->subsystem_device == 0xC000)
- return -ENODEV;
- /* Now check the magic signature byte */
- pci_read_config_word(pdev, PCI_CONF_AMISIG, &magic);
- if (magic != HBA_SIGNATURE_471 && magic != HBA_SIGNATURE)
- return -ENODEV;
- /* Ok it is probably a megaraid */
- }
-
- /*
- * For these vendor and device ids, signature offsets are not
- * valid and 64 bit is implicit
- */
- if (id->driver_data & BOARD_64BIT)
- flag |= BOARD_64BIT;
- else {
- u32 magic64;
-
- pci_read_config_dword(pdev, PCI_CONF_AMISIG64, &magic64);
- if (magic64 == HBA_SIGNATURE_64BIT)
- flag |= BOARD_64BIT;
- }
-
- subsysvid = pdev->subsystem_vendor;
- subsysid = pdev->subsystem_device;
-
- dev_notice(&pdev->dev, "found 0x%4.04x:0x%4.04x\n",
- id->vendor, id->device);
-
- /* Read the base port and IRQ from PCI */
- mega_baseport = pci_resource_start(pdev, 0);
- irq = pdev->irq;
-
- tbase = mega_baseport;
- if (pci_resource_flags(pdev, 0) & IORESOURCE_MEM) {
- flag |= BOARD_MEMMAP;
-
- if (!request_mem_region(mega_baseport, 128, "megaraid")) {
- dev_warn(&pdev->dev, "mem region busy!\n");
- goto out_disable_device;
- }
-
- mega_baseport = (unsigned long)ioremap(mega_baseport, 128);
- if (!mega_baseport) {
- dev_warn(&pdev->dev, "could not map hba memory\n");
- goto out_release_region;
- }
- } else {
- flag |= BOARD_IOMAP;
- mega_baseport += 0x10;
-
- if (!request_region(mega_baseport, 16, "megaraid"))
- goto out_disable_device;
- }
-
- /* Initialize SCSI Host structure */
- host = scsi_host_alloc(&megaraid_template, sizeof(adapter_t));
- if (!host)
- goto out_iounmap;
-
- adapter = (adapter_t *)host->hostdata;
- memset(adapter, 0, sizeof(adapter_t));
-
- dev_notice(&pdev->dev,
- "scsi%d:Found MegaRAID controller at 0x%lx, IRQ:%d\n",
- host->host_no, mega_baseport, irq);
-
- adapter->base = mega_baseport;
- if (flag & BOARD_MEMMAP)
- adapter->mmio_base = (void __iomem *) mega_baseport;
-
- INIT_LIST_HEAD(&adapter->free_list);
- INIT_LIST_HEAD(&adapter->pending_list);
- INIT_LIST_HEAD(&adapter->completed_list);
-
- adapter->flag = flag;
- spin_lock_init(&adapter->lock);
-
- host->cmd_per_lun = max_cmd_per_lun;
- host->max_sectors = max_sectors_per_io;
-
- adapter->dev = pdev;
- adapter->host = host;
-
- adapter->host->irq = irq;
-
- if (flag & BOARD_MEMMAP)
- adapter->host->base = tbase;
- else {
- adapter->host->io_port = tbase;
- adapter->host->n_io_port = 16;
- }
-
- adapter->host->unique_id = (pci_bus << 8) | pci_dev_func;
-
- /*
- * Allocate buffer to issue internal commands.
- */
- adapter->mega_buffer = pci_alloc_consistent(adapter->dev,
- MEGA_BUFFER_SIZE, &adapter->buf_dma_handle);
- if (!adapter->mega_buffer) {
- dev_warn(&pdev->dev, "out of RAM\n");
- goto out_host_put;
- }
-
- adapter->scb_list = kmalloc(sizeof(scb_t) * MAX_COMMANDS, GFP_KERNEL);
- if (!adapter->scb_list) {
- dev_warn(&pdev->dev, "out of RAM\n");
- goto out_free_cmd_buffer;
- }
-
- if (request_irq(irq, (adapter->flag & BOARD_MEMMAP) ?
- megaraid_isr_memmapped : megaraid_isr_iomapped,
- IRQF_SHARED, "megaraid", adapter)) {
- dev_warn(&pdev->dev, "Couldn't register IRQ %d!\n", irq);
- goto out_free_scb_list;
- }
-
- if (mega_setup_mailbox(adapter))
- goto out_free_irq;
-
- if (mega_query_adapter(adapter))
- goto out_free_mbox;
-
- /*
- * Have checks for some buggy f/w
- */
- if ((subsysid == 0x1111) && (subsysvid == 0x1111)) {
- /*
- * Which firmware
- */
- if (!strcmp(adapter->fw_version, "3.00") ||
- !strcmp(adapter->fw_version, "3.01")) {
-
- dev_warn(&pdev->dev,
- "Your card is a Dell PERC "
- "2/SC RAID controller with "
- "firmware\nmegaraid: 3.00 or 3.01. "
- "This driver is known to have "
- "corruption issues\nmegaraid: with "
- "those firmware versions on this "
- "specific card. In order\nmegaraid: "
- "to protect your data, please upgrade "
- "your firmware to version\nmegaraid: "
- "3.10 or later, available from the "
- "Dell Technical Support web\n"
- "megaraid: site at\nhttp://support."
- "dell.com/us/en/filelib/download/"
- "index.asp?fileid=2940\n"
- );
- }
- }
-
- /*
- * If we have a HP 1M(0x60E7)/2M(0x60E8) controller with
- * firmware H.01.07, H.01.08, and H.01.09 disable 64 bit
- * support, since this firmware cannot handle 64 bit
- * addressing
- */
- if ((subsysvid == PCI_VENDOR_ID_HP) &&
- ((subsysid == 0x60E7) || (subsysid == 0x60E8))) {
- /*
- * which firmware
- */
- if (!strcmp(adapter->fw_version, "H01.07") ||
- !strcmp(adapter->fw_version, "H01.08") ||
- !strcmp(adapter->fw_version, "H01.09") ) {
- dev_warn(&pdev->dev,
- "Firmware H.01.07, "
- "H.01.08, and H.01.09 on 1M/2M "
- "controllers\n"
- "do not support 64 bit "
- "addressing.\nDISABLING "
- "64 bit support.\n");
- adapter->flag &= ~BOARD_64BIT;
- }
- }
-
- if (mega_is_bios_enabled(adapter))
- mega_hbas[hba_count].is_bios_enabled = 1;
- mega_hbas[hba_count].hostdata_addr = adapter;
-
- /*
- * Find out which channel is raid and which is scsi. This is
- * for ROMB support.
- */
- mega_enum_raid_scsi(adapter);
-
- /*
- * Find out if a logical drive is set as the boot drive. If
- * there is one, will make that as the first logical drive.
- * ROMB: Do we have to boot from a physical drive. Then all
- * the physical drives would appear before the logical disks.
- * Else, all the physical drives would be exported to the mid
- * layer after logical drives.
- */
- mega_get_boot_drv(adapter);
-
- if (adapter->boot_pdrv_enabled) {
- j = adapter->product_info.nchannels;
- for( i = 0; i < j; i++ )
- adapter->logdrv_chan[i] = 0;
- for( i = j; i < NVIRT_CHAN + j; i++ )
- adapter->logdrv_chan[i] = 1;
- } else {
- for (i = 0; i < NVIRT_CHAN; i++)
- adapter->logdrv_chan[i] = 1;
- for (i = NVIRT_CHAN; i < MAX_CHANNELS+NVIRT_CHAN; i++)
- adapter->logdrv_chan[i] = 0;
- adapter->mega_ch_class <<= NVIRT_CHAN;
- }
-
- /*
- * Do we support random deletion and addition of logical
- * drives
- */
- adapter->read_ldidmap = 0; /* set it after first logdrv
- delete cmd */
- adapter->support_random_del = mega_support_random_del(adapter);
-
- /* Initialize SCBs */
- if (mega_init_scb(adapter))
- goto out_free_mbox;
-
- /*
- * Reset the pending commands counter
- */
- atomic_set(&adapter->pend_cmds, 0);
-
- /*
- * Reset the adapter quiescent flag
- */
- atomic_set(&adapter->quiescent, 0);
-
- hba_soft_state[hba_count] = adapter;
-
- /*
- * Fill in the structure which needs to be passed back to the
- * application when it does an ioctl() for controller related
- * information.
- */
- i = hba_count;
-
- mcontroller[i].base = mega_baseport;
- mcontroller[i].irq = irq;
- mcontroller[i].numldrv = adapter->numldrv;
- mcontroller[i].pcibus = pci_bus;
- mcontroller[i].pcidev = id->device;
- mcontroller[i].pcifun = PCI_FUNC (pci_dev_func);
- mcontroller[i].pciid = -1;
- mcontroller[i].pcivendor = id->vendor;
- mcontroller[i].pcislot = PCI_SLOT(pci_dev_func);
- mcontroller[i].uid = (pci_bus << 8) | pci_dev_func;
-
-
- /* Set the Mode of addressing to 64 bit if we can */
- if ((adapter->flag & BOARD_64BIT) && (sizeof(dma_addr_t) == 8)) {
- pci_set_dma_mask(pdev, DMA_BIT_MASK(64));
- adapter->has_64bit_addr = 1;
- } else {
- pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
- adapter->has_64bit_addr = 0;
- }
-
- mutex_init(&adapter->int_mtx);
- init_completion(&adapter->int_waitq);
-
- adapter->this_id = DEFAULT_INITIATOR_ID;
- adapter->host->this_id = DEFAULT_INITIATOR_ID;
-
-#if MEGA_HAVE_CLUSTERING
- /*
- * Is cluster support enabled on this controller
- * Note: In a cluster the HBAs ( the initiators ) will have
- * different target IDs and we cannot assume it to be 7. Call
- * to mega_support_cluster() will get the target ids also if
- * the cluster support is available
- */
- adapter->has_cluster = mega_support_cluster(adapter);
- if (adapter->has_cluster) {
- dev_notice(&pdev->dev,
- "Cluster driver, initiator id:%d\n",
- adapter->this_id);
- }
-#endif
-
- pci_set_drvdata(pdev, host);
-
- mega_create_proc_entry(hba_count, mega_proc_dir_entry);
-
- error = scsi_add_host(host, &pdev->dev);
- if (error)
- goto out_free_mbox;
-
- scsi_scan_host(host);
- hba_count++;
- return 0;
-
- out_free_mbox:
- pci_free_consistent(adapter->dev, sizeof(mbox64_t),
- adapter->una_mbox64, adapter->una_mbox64_dma);
- out_free_irq:
- free_irq(adapter->host->irq, adapter);
- out_free_scb_list:
- kfree(adapter->scb_list);
- out_free_cmd_buffer:
- pci_free_consistent(adapter->dev, MEGA_BUFFER_SIZE,
- adapter->mega_buffer, adapter->buf_dma_handle);
- out_host_put:
- scsi_host_put(host);
- out_iounmap:
- if (flag & BOARD_MEMMAP)
- iounmap((void *)mega_baseport);
- out_release_region:
- if (flag & BOARD_MEMMAP)
- release_mem_region(tbase, 128);
- else
- release_region(mega_baseport, 16);
- out_disable_device:
- pci_disable_device(pdev);
- out:
- return error;
-}
-
-static void
-__megaraid_shutdown(adapter_t *adapter)
-{
- u_char raw_mbox[sizeof(struct mbox_out)];
- mbox_t *mbox = (mbox_t *)raw_mbox;
- int i;
-
- /* Flush adapter cache */
- memset(&mbox->m_out, 0, sizeof(raw_mbox));
- raw_mbox[0] = FLUSH_ADAPTER;
-
- free_irq(adapter->host->irq, adapter);
-
- /* Issue a blocking (interrupts disabled) command to the card */
- issue_scb_block(adapter, raw_mbox);
-
- /* Flush disks cache */
- memset(&mbox->m_out, 0, sizeof(raw_mbox));
- raw_mbox[0] = FLUSH_SYSTEM;
-
- /* Issue a blocking (interrupts disabled) command to the card */
- issue_scb_block(adapter, raw_mbox);
-
- if (atomic_read(&adapter->pend_cmds) > 0)
- dev_warn(&adapter->dev->dev, "pending commands!!\n");
-
- /*
- * Have a delibrate delay to make sure all the caches are
- * actually flushed.
- */
- for (i = 0; i <= 10; i++)
- mdelay(1000);
-}
-
-static void
-megaraid_remove_one(struct pci_dev *pdev)
-{
- struct Scsi_Host *host = pci_get_drvdata(pdev);
- adapter_t *adapter = (adapter_t *)host->hostdata;
-
- scsi_remove_host(host);
-
- __megaraid_shutdown(adapter);
-
- /* Free our resources */
- if (adapter->flag & BOARD_MEMMAP) {
- iounmap((void *)adapter->base);
- release_mem_region(adapter->host->base, 128);
- } else
- release_region(adapter->base, 16);
-
- mega_free_sgl(adapter);
-
-#ifdef CONFIG_PROC_FS
- if (adapter->controller_proc_dir_entry) {
- remove_proc_entry("stat", adapter->controller_proc_dir_entry);
- remove_proc_entry("config",
- adapter->controller_proc_dir_entry);
- remove_proc_entry("mailbox",
- adapter->controller_proc_dir_entry);
-#if MEGA_HAVE_ENH_PROC
- remove_proc_entry("rebuild-rate",
- adapter->controller_proc_dir_entry);
- remove_proc_entry("battery-status",
- adapter->controller_proc_dir_entry);
-
- remove_proc_entry("diskdrives-ch0",
- adapter->controller_proc_dir_entry);
- remove_proc_entry("diskdrives-ch1",
- adapter->controller_proc_dir_entry);
- remove_proc_entry("diskdrives-ch2",
- adapter->controller_proc_dir_entry);
- remove_proc_entry("diskdrives-ch3",
- adapter->controller_proc_dir_entry);
-
- remove_proc_entry("raiddrives-0-9",
- adapter->controller_proc_dir_entry);
- remove_proc_entry("raiddrives-10-19",
- adapter->controller_proc_dir_entry);
- remove_proc_entry("raiddrives-20-29",
- adapter->controller_proc_dir_entry);
- remove_proc_entry("raiddrives-30-39",
- adapter->controller_proc_dir_entry);
-#endif
- {
- char buf[12] = { 0 };
- sprintf(buf, "hba%d", adapter->host->host_no);
- remove_proc_entry(buf, mega_proc_dir_entry);
- }
- }
-#endif
-
- pci_free_consistent(adapter->dev, MEGA_BUFFER_SIZE,
- adapter->mega_buffer, adapter->buf_dma_handle);
- kfree(adapter->scb_list);
- pci_free_consistent(adapter->dev, sizeof(mbox64_t),
- adapter->una_mbox64, adapter->una_mbox64_dma);
-
- scsi_host_put(host);
- pci_disable_device(pdev);
-
- hba_count--;
-}
-
-static void
-megaraid_shutdown(struct pci_dev *pdev)
-{
- struct Scsi_Host *host = pci_get_drvdata(pdev);
- adapter_t *adapter = (adapter_t *)host->hostdata;
-
- __megaraid_shutdown(adapter);
-}
-
-static struct pci_device_id megaraid_pci_tbl[] = {
- {PCI_VENDOR_ID_AMI, PCI_DEVICE_ID_AMI_MEGARAID,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
- {PCI_VENDOR_ID_AMI, PCI_DEVICE_ID_AMI_MEGARAID2,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
- {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_AMI_MEGARAID3,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
- {0,}
-};
-MODULE_DEVICE_TABLE(pci, megaraid_pci_tbl);
-
-static struct pci_driver megaraid_pci_driver = {
- .name = "megaraid_legacy",
- .id_table = megaraid_pci_tbl,
- .probe = megaraid_probe_one,
- .remove = megaraid_remove_one,
- .shutdown = megaraid_shutdown,
-};
-
-static int __init megaraid_init(void)
-{
- int error;
-
- if ((max_cmd_per_lun <= 0) || (max_cmd_per_lun > MAX_CMD_PER_LUN))
- max_cmd_per_lun = MAX_CMD_PER_LUN;
- if (max_mbox_busy_wait > MBOX_BUSY_WAIT)
- max_mbox_busy_wait = MBOX_BUSY_WAIT;
-
-#ifdef CONFIG_PROC_FS
- mega_proc_dir_entry = proc_mkdir("megaraid", NULL);
- if (!mega_proc_dir_entry) {
- printk(KERN_WARNING
- "megaraid: failed to create megaraid root\n");
- }
-#endif
- error = pci_register_driver(&megaraid_pci_driver);
- if (error) {
-#ifdef CONFIG_PROC_FS
- remove_proc_entry("megaraid", NULL);
-#endif
- return error;
- }
-
- /*
- * Register the driver as a character device, for applications
- * to access it for ioctls.
- * First argument (major) to register_chrdev implies a dynamic
- * major number allocation.
- */
- major = register_chrdev(0, "megadev_legacy", &megadev_fops);
- if (!major) {
- printk(KERN_WARNING
- "megaraid: failed to register char device\n");
- }
-
- return 0;
-}
-
-static void __exit megaraid_exit(void)
-{
- /*
- * Unregister the character device interface to the driver.
- */
- unregister_chrdev(major, "megadev_legacy");
-
- pci_unregister_driver(&megaraid_pci_driver);
-
-#ifdef CONFIG_PROC_FS
- remove_proc_entry("megaraid", NULL);
-#endif
-}
-
-module_init(megaraid_init);
-module_exit(megaraid_exit);
-
-/* vi: set ts=8 sw=8 tw=78: */
diff --git a/drivers/scsi/megaraid.h b/drivers/scsi/megaraid.h
deleted file mode 100644
index 508d65e..0000000
--- a/drivers/scsi/megaraid.h
+++ /dev/null
@@ -1,1010 +0,0 @@
-#ifndef __MEGARAID_H__
-#define __MEGARAID_H__
-
-#include <linux/spinlock.h>
-#include <linux/mutex.h>
-
-#define MEGARAID_VERSION \
- "v2.00.4 (Release Date: Thu Feb 9 08:51:30 EST 2006)\n"
-
-/*
- * Driver features - change the values to enable or disable features in the
- * driver.
- */
-
-/*
- * Command coalescing - This feature allows the driver to be able to combine
- * two or more commands and issue as one command in order to boost I/O
- * performance. Useful if the nature of the I/O is sequential. It is not very
- * useful for random natured I/Os.
- */
-#define MEGA_HAVE_COALESCING 0
-
-/*
- * Clustering support - Set this flag if you are planning to use the
- * clustering services provided by the megaraid controllers and planning to
- * setup a cluster
- */
-#define MEGA_HAVE_CLUSTERING 1
-
-/*
- * Driver statistics - Set this flag if you are interested in statics about
- * number of I/O completed on each logical drive and how many interrupts
- * generated. If enabled, this information is available through /proc
- * interface and through the private ioctl. Setting this flag has a
- * performance penalty.
- */
-#define MEGA_HAVE_STATS 0
-
-/*
- * Enhanced /proc interface - This feature will allow you to have a more
- * detailed /proc interface for megaraid driver. E.g., a real time update of
- * the status of the logical drives, battery status, physical drives etc.
- */
-#define MEGA_HAVE_ENH_PROC 1
-
-#define MAX_DEV_TYPE 32
-
-#define PCI_DEVICE_ID_DISCOVERY 0x000E
-#define PCI_DEVICE_ID_PERC4_DI 0x000F
-#define PCI_DEVICE_ID_PERC4_QC_VERDE 0x0407
-
-#define HBA_SIGNATURE 0x3344
-#define HBA_SIGNATURE_471 0xCCCC
-#define HBA_SIGNATURE_64BIT 0x0299
-
-#define MBOX_BUSY_WAIT 10 /* wait for up to 10 usec for
- mailbox to be free */
-#define DEFAULT_INITIATOR_ID 7
-
-#define MAX_SGLIST 64 /* max supported in f/w */
-#define MIN_SGLIST 26 /* guaranteed to support these many */
-#define MAX_COMMANDS 126
-#define CMDID_INT_CMDS MAX_COMMANDS+1 /* make sure CMDID_INT_CMDS
- is less than max commands
- supported by any f/w */
-
-#define MAX_CDB_LEN 10
-#define MAX_EXT_CDB_LEN 16 /* we support cdb length up to 16 */
-
-#define DEF_CMD_PER_LUN 63
-#define MAX_CMD_PER_LUN MAX_COMMANDS
-#define MAX_FIRMWARE_STATUS 46
-#define MAX_XFER_PER_CMD (64*1024)
-#define MAX_SECTORS_PER_IO 128
-
-#define MAX_LOGICAL_DRIVES_40LD 40
-#define FC_MAX_PHYSICAL_DEVICES 256
-#define MAX_LOGICAL_DRIVES_8LD 8
-#define MAX_CHANNELS 5
-#define MAX_TARGET 15
-#define MAX_PHYSICAL_DRIVES MAX_CHANNELS*MAX_TARGET
-#define MAX_ROW_SIZE_40LD 32
-#define MAX_ROW_SIZE_8LD 8
-#define MAX_SPAN_DEPTH 8
-
-#define NVIRT_CHAN 4 /* # of virtual channels to represent
- up to 60 logical drives */
-struct mbox_out {
- /* 0x0 */ u8 cmd;
- /* 0x1 */ u8 cmdid;
- /* 0x2 */ u16 numsectors;
- /* 0x4 */ u32 lba;
- /* 0x8 */ u32 xferaddr;
- /* 0xC */ u8 logdrv;
- /* 0xD */ u8 numsgelements;
- /* 0xE */ u8 resvd;
-} __attribute__ ((packed));
-
-struct mbox_in {
- /* 0xF */ volatile u8 busy;
- /* 0x10 */ volatile u8 numstatus;
- /* 0x11 */ volatile u8 status;
- /* 0x12 */ volatile u8 completed[MAX_FIRMWARE_STATUS];
- volatile u8 poll;
- volatile u8 ack;
-} __attribute__ ((packed));
-
-typedef struct {
- struct mbox_out m_out;
- struct mbox_in m_in;
-} __attribute__ ((packed)) mbox_t;
-
-typedef struct {
- u32 xfer_segment_lo;
- u32 xfer_segment_hi;
- mbox_t mbox;
-} __attribute__ ((packed)) mbox64_t;
-
-
-/*
- * Passthru definitions
- */
-#define MAX_REQ_SENSE_LEN 0x20
-
-typedef struct {
- u8 timeout:3; /* 0=6sec/1=60sec/2=10min/3=3hrs */
- u8 ars:1;
- u8 reserved:3;
- u8 islogical:1;
- u8 logdrv; /* if islogical == 1 */
- u8 channel; /* if islogical == 0 */
- u8 target; /* if islogical == 0 */
- u8 queuetag; /* unused */
- u8 queueaction; /* unused */
- u8 cdb[MAX_CDB_LEN];
- u8 cdblen;
- u8 reqsenselen;
- u8 reqsensearea[MAX_REQ_SENSE_LEN];
- u8 numsgelements;
- u8 scsistatus;
- u32 dataxferaddr;
- u32 dataxferlen;
-} __attribute__ ((packed)) mega_passthru;
-
-
-/*
- * Extended passthru: support CDB > 10 bytes
- */
-typedef struct {
- u8 timeout:3; /* 0=6sec/1=60sec/2=10min/3=3hrs */
- u8 ars:1;
- u8 rsvd1:1;
- u8 cd_rom:1;
- u8 rsvd2:1;
- u8 islogical:1;
- u8 logdrv; /* if islogical == 1 */
- u8 channel; /* if islogical == 0 */
- u8 target; /* if islogical == 0 */
- u8 queuetag; /* unused */
- u8 queueaction; /* unused */
- u8 cdblen;
- u8 rsvd3;
- u8 cdb[MAX_EXT_CDB_LEN];
- u8 numsgelements;
- u8 status;
- u8 reqsenselen;
- u8 reqsensearea[MAX_REQ_SENSE_LEN];
- u8 rsvd4;
- u32 dataxferaddr;
- u32 dataxferlen;
-} __attribute__ ((packed)) mega_ext_passthru;
-
-typedef struct {
- u64 address;
- u32 length;
-} __attribute__ ((packed)) mega_sgl64;
-
-typedef struct {
- u32 address;
- u32 length;
-} __attribute__ ((packed)) mega_sglist;
-
-
-/* Queued command data */
-typedef struct {
- int idx;
- u32 state;
- struct list_head list;
- u8 raw_mbox[66];
- u32 dma_type;
- u32 dma_direction;
-
- Scsi_Cmnd *cmd;
- dma_addr_t dma_h_bulkdata;
- dma_addr_t dma_h_sgdata;
-
- mega_sglist *sgl;
- mega_sgl64 *sgl64;
- dma_addr_t sgl_dma_addr;
-
- mega_passthru *pthru;
- dma_addr_t pthru_dma_addr;
- mega_ext_passthru *epthru;
- dma_addr_t epthru_dma_addr;
-} scb_t;
-
-/*
- * Flags to follow the scb as it transitions between various stages
- */
-#define SCB_FREE 0x0000 /* on the free list */
-#define SCB_ACTIVE 0x0001 /* off the free list */
-#define SCB_PENDQ 0x0002 /* on the pending queue */
-#define SCB_ISSUED 0x0004 /* issued - owner f/w */
-#define SCB_ABORT 0x0008 /* Got an abort for this one */
-#define SCB_RESET 0x0010 /* Got a reset for this one */
-
-/*
- * Utilities declare this strcture size as 1024 bytes. So more fields can
- * be added in future.
- */
-typedef struct {
- u32 data_size; /* current size in bytes (not including resvd) */
-
- u32 config_signature;
- /* Current value is 0x00282008
- * 0x28=MAX_LOGICAL_DRIVES,
- * 0x20=Number of stripes and
- * 0x08=Number of spans */
-
- u8 fw_version[16]; /* printable ASCI string */
- u8 bios_version[16]; /* printable ASCI string */
- u8 product_name[80]; /* printable ASCI string */
-
- u8 max_commands; /* Max. concurrent commands supported */
- u8 nchannels; /* Number of SCSI Channels detected */
- u8 fc_loop_present; /* Number of Fibre Loops detected */
- u8 mem_type; /* EDO, FPM, SDRAM etc */
-
- u32 signature;
- u16 dram_size; /* In terms of MB */
- u16 subsysid;
-
- u16 subsysvid;
- u8 notify_counters;
- u8 pad1k[889]; /* 135 + 889 resvd = 1024 total size */
-} __attribute__ ((packed)) mega_product_info;
-
-struct notify {
- u32 global_counter; /* Any change increments this counter */
-
- u8 param_counter; /* Indicates any params changed */
- u8 param_id; /* Param modified - defined below */
- u16 param_val; /* New val of last param modified */
-
- u8 write_config_counter; /* write config occurred */
- u8 write_config_rsvd[3];
-
- u8 ldrv_op_counter; /* Indicates ldrv op started/completed */
- u8 ldrv_opid; /* ldrv num */
- u8 ldrv_opcmd; /* ldrv operation - defined below */
- u8 ldrv_opstatus; /* status of the operation */
-
- u8 ldrv_state_counter; /* Indicates change of ldrv state */
- u8 ldrv_state_id; /* ldrv num */
- u8 ldrv_state_new; /* New state */
- u8 ldrv_state_old; /* old state */
-
- u8 pdrv_state_counter; /* Indicates change of ldrv state */
- u8 pdrv_state_id; /* pdrv id */
- u8 pdrv_state_new; /* New state */
- u8 pdrv_state_old; /* old state */
-
- u8 pdrv_fmt_counter; /* Indicates pdrv format started/over */
- u8 pdrv_fmt_id; /* pdrv id */
- u8 pdrv_fmt_val; /* format started/over */
- u8 pdrv_fmt_rsvd;
-
- u8 targ_xfer_counter; /* Indicates SCSI-2 Xfer rate change */
- u8 targ_xfer_id; /* pdrv Id */
- u8 targ_xfer_val; /* new Xfer params of last pdrv */
- u8 targ_xfer_rsvd;
-
- u8 fcloop_id_chg_counter; /* Indicates loopid changed */
- u8 fcloopid_pdrvid; /* pdrv id */
- u8 fcloop_id0; /* loopid on fc loop 0 */
- u8 fcloop_id1; /* loopid on fc loop 1 */
-
- u8 fcloop_state_counter; /* Indicates loop state changed */
- u8 fcloop_state0; /* state of fc loop 0 */
- u8 fcloop_state1; /* state of fc loop 1 */
- u8 fcloop_state_rsvd;
-} __attribute__ ((packed));
-
-#define MAX_NOTIFY_SIZE 0x80
-#define CUR_NOTIFY_SIZE sizeof(struct notify)
-
-typedef struct {
- u32 data_size; /* current size in bytes (not including resvd) */
-
- struct notify notify;
-
- u8 notify_rsvd[MAX_NOTIFY_SIZE - CUR_NOTIFY_SIZE];
-
- u8 rebuild_rate; /* Rebuild rate (0% - 100%) */
- u8 cache_flush_interval; /* In terms of Seconds */
- u8 sense_alert;
- u8 drive_insert_count; /* drive insertion count */
-
- u8 battery_status;
- u8 num_ldrv; /* No. of Log Drives configured */
- u8 recon_state[MAX_LOGICAL_DRIVES_40LD / 8]; /* State of
- reconstruct */
- u16 ldrv_op_status[MAX_LOGICAL_DRIVES_40LD / 8]; /* logdrv
- Status */
-
- u32 ldrv_size[MAX_LOGICAL_DRIVES_40LD];/* Size of each log drv */
- u8 ldrv_prop[MAX_LOGICAL_DRIVES_40LD];
- u8 ldrv_state[MAX_LOGICAL_DRIVES_40LD];/* State of log drives */
- u8 pdrv_state[FC_MAX_PHYSICAL_DEVICES];/* State of phys drvs. */
- u16 pdrv_format[FC_MAX_PHYSICAL_DEVICES / 16];
-
- u8 targ_xfer[80]; /* phys device transfer rate */
- u8 pad1k[263]; /* 761 + 263reserved = 1024 bytes total size */
-} __attribute__ ((packed)) mega_inquiry3;
-
-
-/* Structures */
-typedef struct {
- u8 max_commands; /* Max concurrent commands supported */
- u8 rebuild_rate; /* Rebuild rate - 0% thru 100% */
- u8 max_targ_per_chan; /* Max targ per channel */
- u8 nchannels; /* Number of channels on HBA */
- u8 fw_version[4]; /* Firmware version */
- u16 age_of_flash; /* Number of times FW has been flashed */
- u8 chip_set_value; /* Contents of 0xC0000832 */
- u8 dram_size; /* In MB */
- u8 cache_flush_interval; /* in seconds */
- u8 bios_version[4];
- u8 board_type;
- u8 sense_alert;
- u8 write_config_count; /* Increase with every configuration
- change */
- u8 drive_inserted_count; /* Increase with every drive inserted
- */
- u8 inserted_drive; /* Channel:Id of inserted drive */
- u8 battery_status; /*
- * BIT 0: battery module missing
- * BIT 1: VBAD
- * BIT 2: temperature high
- * BIT 3: battery pack missing
- * BIT 4,5:
- * 00 - charge complete
- * 01 - fast charge in progress
- * 10 - fast charge fail
- * 11 - undefined
- * Bit 6: counter > 1000
- * Bit 7: Undefined
- */
- u8 dec_fault_bus_info;
-} __attribute__ ((packed)) mega_adp_info;
-
-
-typedef struct {
- u8 num_ldrv; /* Number of logical drives configured */
- u8 rsvd[3];
- u32 ldrv_size[MAX_LOGICAL_DRIVES_8LD];
- u8 ldrv_prop[MAX_LOGICAL_DRIVES_8LD];
- u8 ldrv_state[MAX_LOGICAL_DRIVES_8LD];
-} __attribute__ ((packed)) mega_ldrv_info;
-
-typedef struct {
- u8 pdrv_state[MAX_PHYSICAL_DRIVES];
- u8 rsvd;
-} __attribute__ ((packed)) mega_pdrv_info;
-
-/* RAID inquiry: Mailbox command 0x05*/
-typedef struct {
- mega_adp_info adapter_info;
- mega_ldrv_info logdrv_info;
- mega_pdrv_info pdrv_info;
-} __attribute__ ((packed)) mraid_inquiry;
-
-
-/* RAID extended inquiry: Mailbox command 0x04*/
-typedef struct {
- mraid_inquiry raid_inq;
- u16 phys_drv_format[MAX_CHANNELS];
- u8 stack_attn;
- u8 modem_status;
- u8 rsvd[2];
-} __attribute__ ((packed)) mraid_ext_inquiry;
-
-
-typedef struct {
- u8 channel;
- u8 target;
-}__attribute__ ((packed)) adp_device;
-
-typedef struct {
- u32 start_blk; /* starting block */
- u32 num_blks; /* # of blocks */
- adp_device device[MAX_ROW_SIZE_40LD];
-}__attribute__ ((packed)) adp_span_40ld;
-
-typedef struct {
- u32 start_blk; /* starting block */
- u32 num_blks; /* # of blocks */
- adp_device device[MAX_ROW_SIZE_8LD];
-}__attribute__ ((packed)) adp_span_8ld;
-
-typedef struct {
- u8 span_depth; /* Total # of spans */
- u8 level; /* RAID level */
- u8 read_ahead; /* read ahead, no read ahead, adaptive read
- ahead */
- u8 stripe_sz; /* Encoded stripe size */
- u8 status; /* Status of the logical drive */
- u8 write_mode; /* write mode, write_through/write_back */
- u8 direct_io; /* direct io or through cache */
- u8 row_size; /* Number of stripes in a row */
-} __attribute__ ((packed)) logdrv_param;
-
-typedef struct {
- logdrv_param lparam;
- adp_span_40ld span[MAX_SPAN_DEPTH];
-}__attribute__ ((packed)) logdrv_40ld;
-
-typedef struct {
- logdrv_param lparam;
- adp_span_8ld span[MAX_SPAN_DEPTH];
-}__attribute__ ((packed)) logdrv_8ld;
-
-typedef struct {
- u8 type; /* Type of the device */
- u8 cur_status; /* current status of the device */
- u8 tag_depth; /* Level of tagging */
- u8 sync_neg; /* sync negotiation - ENABLE or DISABLE */
- u32 size; /* configurable size in terms of 512 byte
- blocks */
-}__attribute__ ((packed)) phys_drv;
-
-typedef struct {
- u8 nlog_drives; /* number of logical drives */
- u8 resvd[3];
- logdrv_40ld ldrv[MAX_LOGICAL_DRIVES_40LD];
- phys_drv pdrv[MAX_PHYSICAL_DRIVES];
-}__attribute__ ((packed)) disk_array_40ld;
-
-typedef struct {
- u8 nlog_drives; /* number of logical drives */
- u8 resvd[3];
- logdrv_8ld ldrv[MAX_LOGICAL_DRIVES_8LD];
- phys_drv pdrv[MAX_PHYSICAL_DRIVES];
-}__attribute__ ((packed)) disk_array_8ld;
-
-
-/*
- * User ioctl structure.
- * This structure will be used for Traditional Method ioctl interface
- * commands (0x80),Alternate Buffer Method (0x81) ioctl commands and the
- * Driver ioctls.
- * The Driver ioctl interface handles the commands at the driver level,
- * without being sent to the card.
- */
-/* system call imposed limit. Change accordingly */
-#define IOCTL_MAX_DATALEN 4096
-
-struct uioctl_t {
- u32 inlen;
- u32 outlen;
- union {
- u8 fca[16];
- struct {
- u8 opcode;
- u8 subopcode;
- u16 adapno;
-#if BITS_PER_LONG == 32
- u8 *buffer;
- u8 pad[4];
-#endif
-#if BITS_PER_LONG == 64
- u8 *buffer;
-#endif
- u32 length;
- } __attribute__ ((packed)) fcs;
- } __attribute__ ((packed)) ui;
- u8 mbox[18]; /* 16 bytes + 2 status bytes */
- mega_passthru pthru;
-#if BITS_PER_LONG == 32
- char __user *data; /* buffer <= 4096 for 0x80 commands */
- char pad[4];
-#endif
-#if BITS_PER_LONG == 64
- char __user *data;
-#endif
-} __attribute__ ((packed));
-
-/*
- * struct mcontroller is used to pass information about the controllers in the
- * system. Its up to the application how to use the information. We are passing
- * as much info about the cards as possible and useful. Before issuing the
- * call to find information about the cards, the application needs to issue a
- * ioctl first to find out the number of controllers in the system.
- */
-#define MAX_CONTROLLERS 32
-
-struct mcontroller {
- u64 base;
- u8 irq;
- u8 numldrv;
- u8 pcibus;
- u16 pcidev;
- u8 pcifun;
- u16 pciid;
- u16 pcivendor;
- u8 pcislot;
- u32 uid;
-};
-
-/*
- * mailbox structure used for internal commands
- */
-typedef struct {
- u8 cmd;
- u8 cmdid;
- u8 opcode;
- u8 subopcode;
- u32 lba;
- u32 xferaddr;
- u8 logdrv;
- u8 rsvd[3];
- u8 numstatus;
- u8 status;
-} __attribute__ ((packed)) megacmd_t;
-
-/*
- * Defines for Driver IOCTL interface
- */
-#define MEGAIOC_MAGIC 'm'
-
-#define MEGAIOC_QNADAP 'm' /* Query # of adapters */
-#define MEGAIOC_QDRVRVER 'e' /* Query driver version */
-#define MEGAIOC_QADAPINFO 'g' /* Query adapter information */
-#define MKADAP(adapno) (MEGAIOC_MAGIC << 8 | (adapno) )
-#define GETADAP(mkadap) ( (mkadap) ^ MEGAIOC_MAGIC << 8 )
-
-/*
- * Definition for the new ioctl interface (NIT)
- */
-
-/*
- * Vendor specific Group-7 commands
- */
-#define VENDOR_SPECIFIC_COMMANDS 0xE0
-#define MEGA_INTERNAL_CMD VENDOR_SPECIFIC_COMMANDS + 0x01
-
-/*
- * The ioctl command. No other command shall be used for this interface
- */
-#define USCSICMD VENDOR_SPECIFIC_COMMANDS
-
-/*
- * Data direction flags
- */
-#define UIOC_RD 0x00001
-#define UIOC_WR 0x00002
-
-/*
- * ioctl opcodes
- */
-#define MBOX_CMD 0x00000 /* DCMD or passthru command */
-#define GET_DRIVER_VER 0x10000 /* Get driver version */
-#define GET_N_ADAP 0x20000 /* Get number of adapters */
-#define GET_ADAP_INFO 0x30000 /* Get information about a adapter */
-#define GET_CAP 0x40000 /* Get ioctl capabilities */
-#define GET_STATS 0x50000 /* Get statistics, including error info */
-
-
-/*
- * The ioctl structure.
- * MBOX macro converts a nitioctl_t structure to megacmd_t pointer and
- * MBOX_P macro converts a nitioctl_t pointer to megacmd_t pointer.
- */
-typedef struct {
- char signature[8]; /* Must contain "MEGANIT" */
- u32 opcode; /* opcode for the command */
- u32 adapno; /* adapter number */
- union {
- u8 __raw_mbox[18];
- void __user *__uaddr; /* xferaddr for non-mbox cmds */
- }__ua;
-
-#define uioc_rmbox __ua.__raw_mbox
-#define MBOX(uioc) ((megacmd_t *)&((uioc).__ua.__raw_mbox[0]))
-#define MBOX_P(uioc) ((megacmd_t __user *)&((uioc)->__ua.__raw_mbox[0]))
-#define uioc_uaddr __ua.__uaddr
-
- u32 xferlen; /* xferlen for DCMD and non-mbox
- commands */
- u32 flags; /* data direction flags */
-}nitioctl_t;
-
-
-/*
- * I/O statistics for some applications like SNMP agent. The caller must
- * provide the number of logical drives for which status should be reported.
- */
-typedef struct {
- int num_ldrv; /* Number for logical drives for which the
- status should be reported. */
- u32 nreads[MAX_LOGICAL_DRIVES_40LD]; /* number of reads for
- each logical drive */
- u32 nreadblocks[MAX_LOGICAL_DRIVES_40LD]; /* number of blocks
- read for each logical
- drive */
- u32 nwrites[MAX_LOGICAL_DRIVES_40LD]; /* number of writes
- for each logical
- drive */
- u32 nwriteblocks[MAX_LOGICAL_DRIVES_40LD]; /* number of blocks
- writes for each
- logical drive */
- u32 rd_errors[MAX_LOGICAL_DRIVES_40LD]; /* number of read
- errors for each
- logical drive */
- u32 wr_errors[MAX_LOGICAL_DRIVES_40LD]; /* number of write
- errors for each
- logical drive */
-}megastat_t;
-
-
-struct private_bios_data {
- u8 geometry:4; /*
- * bits 0-3 - BIOS geometry
- * 0x0001 - 1GB
- * 0x0010 - 2GB
- * 0x1000 - 8GB
- * Others values are invalid
- */
- u8 unused:4; /* bits 4-7 are unused */
- u8 boot_drv; /*
- * logical drive set as boot drive
- * 0..7 - for 8LD cards
- * 0..39 - for 40LD cards
- */
- u8 rsvd[12];
- u16 cksum; /* 0-(sum of first 13 bytes of this structure) */
-} __attribute__ ((packed));
-
-
-
-
-/*
- * Mailbox and firmware commands and subopcodes used in this driver.
- */
-
-#define MEGA_MBOXCMD_LREAD 0x01
-#define MEGA_MBOXCMD_LWRITE 0x02
-#define MEGA_MBOXCMD_PASSTHRU 0x03
-#define MEGA_MBOXCMD_ADPEXTINQ 0x04
-#define MEGA_MBOXCMD_ADAPTERINQ 0x05
-#define MEGA_MBOXCMD_LREAD64 0xA7
-#define MEGA_MBOXCMD_LWRITE64 0xA8
-#define MEGA_MBOXCMD_PASSTHRU64 0xC3
-#define MEGA_MBOXCMD_EXTPTHRU 0xE3
-
-#define MAIN_MISC_OPCODE 0xA4 /* f/w misc opcode */
-#define GET_MAX_SG_SUPPORT 0x01 /* get max sg len supported by f/w */
-
-#define FC_NEW_CONFIG 0xA1
-#define NC_SUBOP_PRODUCT_INFO 0x0E
-#define NC_SUBOP_ENQUIRY3 0x0F
-#define ENQ3_GET_SOLICITED_FULL 0x02
-#define OP_DCMD_READ_CONFIG 0x04
-#define NEW_READ_CONFIG_8LD 0x67
-#define READ_CONFIG_8LD 0x07
-#define FLUSH_ADAPTER 0x0A
-#define FLUSH_SYSTEM 0xFE
-
-/*
- * Command for random deletion of logical drives
- */
-#define FC_DEL_LOGDRV 0xA4 /* f/w command */
-#define OP_SUP_DEL_LOGDRV 0x2A /* is feature supported */
-#define OP_GET_LDID_MAP 0x18 /* get ldid and logdrv number map */
-#define OP_DEL_LOGDRV 0x1C /* delete logical drive */
-
-/*
- * BIOS commands
- */
-#define IS_BIOS_ENABLED 0x62
-#define GET_BIOS 0x01
-#define CHNL_CLASS 0xA9
-#define GET_CHNL_CLASS 0x00
-#define SET_CHNL_CLASS 0x01
-#define CH_RAID 0x01
-#define CH_SCSI 0x00
-#define BIOS_PVT_DATA 0x40
-#define GET_BIOS_PVT_DATA 0x00
-
-
-/*
- * Commands to support clustering
- */
-#define MEGA_GET_TARGET_ID 0x7D
-#define MEGA_CLUSTER_OP 0x70
-#define MEGA_GET_CLUSTER_MODE 0x02
-#define MEGA_CLUSTER_CMD 0x6E
-#define MEGA_RESERVE_LD 0x01
-#define MEGA_RELEASE_LD 0x02
-#define MEGA_RESET_RESERVATIONS 0x03
-#define MEGA_RESERVATION_STATUS 0x04
-#define MEGA_RESERVE_PD 0x05
-#define MEGA_RELEASE_PD 0x06
-
-
-/*
- * Module battery status
- */
-#define MEGA_BATT_MODULE_MISSING 0x01
-#define MEGA_BATT_LOW_VOLTAGE 0x02
-#define MEGA_BATT_TEMP_HIGH 0x04
-#define MEGA_BATT_PACK_MISSING 0x08
-#define MEGA_BATT_CHARGE_MASK 0x30
-#define MEGA_BATT_CHARGE_DONE 0x00
-#define MEGA_BATT_CHARGE_INPROG 0x10
-#define MEGA_BATT_CHARGE_FAIL 0x20
-#define MEGA_BATT_CYCLES_EXCEEDED 0x40
-
-/*
- * Physical drive states.
- */
-#define PDRV_UNCNF 0
-#define PDRV_ONLINE 3
-#define PDRV_FAILED 4
-#define PDRV_RBLD 5
-#define PDRV_HOTSPARE 6
-
-
-/*
- * Raid logical drive states.
- */
-#define RDRV_OFFLINE 0
-#define RDRV_DEGRADED 1
-#define RDRV_OPTIMAL 2
-#define RDRV_DELETED 3
-
-/*
- * Read, write and cache policies
- */
-#define NO_READ_AHEAD 0
-#define READ_AHEAD 1
-#define ADAP_READ_AHEAD 2
-#define WRMODE_WRITE_THRU 0
-#define WRMODE_WRITE_BACK 1
-#define CACHED_IO 0
-#define DIRECT_IO 1
-
-
-#define SCSI_LIST(scp) ((struct list_head *)(&(scp)->SCp))
-
-/*
- * Each controller's soft state
- */
-typedef struct {
- int this_id; /* our id, may set to different than 7 if
- clustering is available */
- u32 flag;
-
- unsigned long base;
- void __iomem *mmio_base;
-
- /* mbox64 with mbox not aligned on 16-byte boundary */
- mbox64_t *una_mbox64;
- dma_addr_t una_mbox64_dma;
-
- volatile mbox64_t *mbox64;/* ptr to 64-bit mailbox */
- volatile mbox_t *mbox; /* ptr to standard mailbox */
- dma_addr_t mbox_dma;
-
- struct pci_dev *dev;
-
- struct list_head free_list;
- struct list_head pending_list;
- struct list_head completed_list;
-
- struct Scsi_Host *host;
-
-#define MEGA_BUFFER_SIZE (2*1024)
- u8 *mega_buffer;
- dma_addr_t buf_dma_handle;
-
- mega_product_info product_info;
-
- u8 max_cmds;
- scb_t *scb_list;
-
- atomic_t pend_cmds; /* maintain a counter for pending
- commands in firmware */
-
-#if MEGA_HAVE_STATS
- u32 nreads[MAX_LOGICAL_DRIVES_40LD];
- u32 nreadblocks[MAX_LOGICAL_DRIVES_40LD];
- u32 nwrites[MAX_LOGICAL_DRIVES_40LD];
- u32 nwriteblocks[MAX_LOGICAL_DRIVES_40LD];
- u32 rd_errors[MAX_LOGICAL_DRIVES_40LD];
- u32 wr_errors[MAX_LOGICAL_DRIVES_40LD];
-#endif
-
- /* Host adapter parameters */
- u8 numldrv;
- u8 fw_version[7];
- u8 bios_version[7];
-
-#ifdef CONFIG_PROC_FS
- struct proc_dir_entry *controller_proc_dir_entry;
- struct proc_dir_entry *proc_read;
- struct proc_dir_entry *proc_stat;
- struct proc_dir_entry *proc_mbox;
-
-#if MEGA_HAVE_ENH_PROC
- struct proc_dir_entry *proc_rr;
- struct proc_dir_entry *proc_battery;
-#define MAX_PROC_CHANNELS 4
- struct proc_dir_entry *proc_pdrvstat[MAX_PROC_CHANNELS];
- struct proc_dir_entry *proc_rdrvstat[MAX_PROC_CHANNELS];
-#endif
-
-#endif
-
- int has_64bit_addr; /* are we using 64-bit addressing */
- int support_ext_cdb;
- int boot_ldrv_enabled;
- int boot_ldrv;
- int boot_pdrv_enabled; /* boot from physical drive */
- int boot_pdrv_ch; /* boot physical drive channel */
- int boot_pdrv_tgt; /* boot physical drive target */
-
-
- int support_random_del; /* Do we support random deletion of
- logdrvs */
- int read_ldidmap; /* set after logical drive deltion. The
- logical drive number must be read from the
- map */
- atomic_t quiescent; /* a stage reached when delete logical
- drive needs to be done. Stop
- sending requests to the hba till
- delete operation is completed */
- spinlock_t lock;
-
- u8 logdrv_chan[MAX_CHANNELS+NVIRT_CHAN]; /* logical drive are on
- what channels. */
- int mega_ch_class;
-
- u8 sglen; /* f/w supported scatter-gather list length */
-
- scb_t int_scb;
- struct mutex int_mtx; /* To synchronize the internal
- commands */
- int int_status; /* status of internal cmd */
- struct completion int_waitq; /* wait queue for internal
- cmds */
-
- int has_cluster; /* cluster support on this HBA */
-}adapter_t;
-
-
-struct mega_hbas {
- int is_bios_enabled;
- adapter_t *hostdata_addr;
-};
-
-
-/*
- * For state flag. Do not use LSB(8 bits) which are
- * reserved for storing info about channels.
- */
-#define IN_ABORT 0x80000000L
-#define IN_RESET 0x40000000L
-#define BOARD_MEMMAP 0x20000000L
-#define BOARD_IOMAP 0x10000000L
-#define BOARD_40LD 0x08000000L
-#define BOARD_64BIT 0x04000000L
-
-#define INTR_VALID 0x40
-
-#define PCI_CONF_AMISIG 0xa0
-#define PCI_CONF_AMISIG64 0xa4
-
-
-#define MEGA_DMA_TYPE_NONE 0xFFFF
-#define MEGA_BULK_DATA 0x0001
-#define MEGA_SGLIST 0x0002
-
-/*
- * Parameters for the io-mapped controllers
- */
-
-/* I/O Port offsets */
-#define CMD_PORT 0x00
-#define ACK_PORT 0x00
-#define TOGGLE_PORT 0x01
-#define INTR_PORT 0x0a
-
-#define MBOX_BUSY_PORT 0x00
-#define MBOX_PORT0 0x04
-#define MBOX_PORT1 0x05
-#define MBOX_PORT2 0x06
-#define MBOX_PORT3 0x07
-#define ENABLE_MBOX_REGION 0x0B
-
-/* I/O Port Values */
-#define ISSUE_BYTE 0x10
-#define ACK_BYTE 0x08
-#define ENABLE_INTR_BYTE 0xc0
-#define DISABLE_INTR_BYTE 0x00
-#define VALID_INTR_BYTE 0x40
-#define MBOX_BUSY_BYTE 0x10
-#define ENABLE_MBOX_BYTE 0x00
-
-
-/* Setup some port macros here */
-#define issue_command(adapter) \
- outb_p(ISSUE_BYTE, (adapter)->base + CMD_PORT)
-
-#define irq_state(adapter) inb_p((adapter)->base + INTR_PORT)
-
-#define set_irq_state(adapter, value) \
- outb_p((value), (adapter)->base + INTR_PORT)
-
-#define irq_ack(adapter) \
- outb_p(ACK_BYTE, (adapter)->base + ACK_PORT)
-
-#define irq_enable(adapter) \
- outb_p(ENABLE_INTR_BYTE, (adapter)->base + TOGGLE_PORT)
-
-#define irq_disable(adapter) \
- outb_p(DISABLE_INTR_BYTE, (adapter)->base + TOGGLE_PORT)
-
-
-/*
- * This is our SYSDEP area. All kernel specific detail should be placed here -
- * as much as possible
- */
-
-/*
- * End of SYSDEP area
- */
-
-const char *megaraid_info (struct Scsi_Host *);
-
-static int mega_query_adapter(adapter_t *);
-static int issue_scb(adapter_t *, scb_t *);
-static int mega_setup_mailbox(adapter_t *);
-
-static int megaraid_queue (struct Scsi_Host *, struct scsi_cmnd *);
-static scb_t * mega_build_cmd(adapter_t *, Scsi_Cmnd *, int *);
-static void __mega_runpendq(adapter_t *);
-static int issue_scb_block(adapter_t *, u_char *);
-
-static irqreturn_t megaraid_isr_memmapped(int, void *);
-static irqreturn_t megaraid_isr_iomapped(int, void *);
-
-static void mega_free_scb(adapter_t *, scb_t *);
-
-static int megaraid_abort(Scsi_Cmnd *);
-static int megaraid_reset(Scsi_Cmnd *);
-static int megaraid_abort_and_reset(adapter_t *, Scsi_Cmnd *, int);
-static int megaraid_biosparam(struct scsi_device *, struct block_device *,
- sector_t, int []);
-
-static int mega_build_sglist (adapter_t *adapter, scb_t *scb,
- u32 *buffer, u32 *length);
-static int __mega_busywait_mbox (adapter_t *);
-static void mega_rundoneq (adapter_t *);
-static void mega_cmd_done(adapter_t *, u8 [], int, int);
-static inline void mega_free_sgl (adapter_t *adapter);
-static void mega_8_to_40ld (mraid_inquiry *inquiry,
- mega_inquiry3 *enquiry3, mega_product_info *);
-
-static int megadev_open (struct inode *, struct file *);
-static int megadev_ioctl (struct file *, unsigned int, unsigned long);
-static int mega_m_to_n(void __user *, nitioctl_t *);
-static int mega_n_to_m(void __user *, megacmd_t *);
-
-static int mega_init_scb (adapter_t *);
-
-static int mega_is_bios_enabled (adapter_t *);
-
-#ifdef CONFIG_PROC_FS
-static void mega_create_proc_entry(int, struct proc_dir_entry *);
-static int mega_adapinq(adapter_t *, dma_addr_t);
-static int mega_internal_dev_inquiry(adapter_t *, u8, u8, dma_addr_t);
-#endif
-
-static int mega_support_ext_cdb(adapter_t *);
-static mega_passthru* mega_prepare_passthru(adapter_t *, scb_t *,
- Scsi_Cmnd *, int, int);
-static mega_ext_passthru* mega_prepare_extpassthru(adapter_t *,
- scb_t *, Scsi_Cmnd *, int, int);
-static void mega_enum_raid_scsi(adapter_t *);
-static void mega_get_boot_drv(adapter_t *);
-static int mega_support_random_del(adapter_t *);
-static int mega_del_logdrv(adapter_t *, int);
-static int mega_do_del_logdrv(adapter_t *, int);
-static void mega_get_max_sgl(adapter_t *);
-static int mega_internal_command(adapter_t *, megacmd_t *, mega_passthru *);
-static int mega_support_cluster(adapter_t *);
-#endif
-
-/* vi: set ts=8 sw=8 tw=78: */
diff --git a/drivers/scsi/megaraid/Kconfig.megaraid b/drivers/scsi/megaraid/Kconfig.megaraid
index 17419e3..ad1dc16 100644
--- a/drivers/scsi/megaraid/Kconfig.megaraid
+++ b/drivers/scsi/megaraid/Kconfig.megaraid
@@ -64,17 +64,6 @@ config MEGARAID_MAILBOX
To compile this driver as a module, choose M here: the
module will be called megaraid_mbox
-config MEGARAID_LEGACY
- tristate "LSI Logic Legacy MegaRAID Driver"
- depends on PCI && SCSI
- help
- This driver supports the LSI MegaRAID 418, 428, 438, 466, 762, 490
- and 467 SCSI host adapters. This driver also support the all U320
- RAID controllers
-
- To compile this driver as a module, choose M here: the
- module will be called megaraid
-
config MEGARAID_SAS
tristate "LSI Logic MegaRAID SAS RAID Module"
depends on PCI && SCSI
--
1.8.5.6
^ permalink raw reply related [flat|nested] 7+ messages in thread