public inbox for linux-scsi@vger.kernel.org
 help / color / mirror / Atom feed
From: James Smart <jsmart2021@gmail.com>
To: linux-scsi@vger.kernel.org
Cc: Dick Kennedy <dick.kennedy@broadcom.com>,
	James Smart <james.smart@broadcom.com>
Subject: [PATCH 09/21] lpfc: Fix duplicate NVME rport entries and namespaces.
Date: Wed,  2 Aug 2017 16:36:36 -0700	[thread overview]
Message-ID: <20170802233648.4573-10-jsmart2021@gmail.com> (raw)
In-Reply-To: <20170802233648.4573-1-jsmart2021@gmail.com>

From: Dick Kennedy <dick.kennedy@broadcom.com>

After lip, the driver sometimes would have two rports for the same
device, allowing the namespaces to be duplicated by nvme.

In lpfc_plogi_confirm_nport() the driver was not swapping the
nrport maintained by the ndlp's undergoing address swapping. This
allowed the 2nd rport to sneak in as it was considered a separate
device.

This patch adds the fixes to Swap the nrport in each ndlp and take
care of the reference counts on the ndlps similar to FCP rports.

Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
---
 drivers/scsi/lpfc/lpfc_els.c | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
index 6962e22087c8..fe0dd42b75af 100644
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -1527,6 +1527,7 @@ lpfc_plogi_confirm_nport(struct lpfc_hba *phba, uint32_t *prsp,
 	uint8_t  name[sizeof(struct lpfc_name)];
 	uint32_t rc, keepDID = 0, keep_nlp_flag = 0;
 	uint16_t keep_nlp_state;
+	struct lpfc_nvme_rport *keep_nrport = NULL;
 	int  put_node;
 	int  put_rport;
 	unsigned long *active_rrqs_xri_bitmap = NULL;
@@ -1624,6 +1625,10 @@ lpfc_plogi_confirm_nport(struct lpfc_hba *phba, uint32_t *prsp,
 	keep_nlp_state = new_ndlp->nlp_state;
 	lpfc_nlp_set_state(vport, new_ndlp, ndlp->nlp_state);
 
+	/* For nvme, swap the nrport. */
+	keep_nrport = new_ndlp->nrport;
+	new_ndlp->nrport = ndlp->nrport;
+
 	/* Move this back to NPR state */
 	if (memcmp(&ndlp->nlp_portname, name, sizeof(struct lpfc_name)) == 0) {
 		/* The new_ndlp is replacing ndlp totally, so we need
@@ -1646,6 +1651,13 @@ lpfc_plogi_confirm_nport(struct lpfc_hba *phba, uint32_t *prsp,
 			}
 			new_ndlp->nlp_type = ndlp->nlp_type;
 		}
+
+		/* Fix up the nvme rport */
+		if (ndlp->nrport) {
+			ndlp->nrport = NULL;
+			lpfc_nlp_put(ndlp);
+		}
+
 		/* We shall actually free the ndlp with both nlp_DID and
 		 * nlp_portname fields equals 0 to avoid any ndlp on the
 		 * nodelist never to be used.
@@ -1690,6 +1702,14 @@ lpfc_plogi_confirm_nport(struct lpfc_hba *phba, uint32_t *prsp,
 			keep_nlp_state = NLP_STE_NPR_NODE;
 		lpfc_nlp_set_state(vport, ndlp, keep_nlp_state);
 
+		/* Previous ndlp no longer active with nvme host transport.
+		 * Remove reference from earlier registration unless the
+		 * nvme host took care of it.
+		 */
+		if (ndlp->nrport)
+			lpfc_nlp_put(ndlp);
+		ndlp->nrport = keep_nrport;
+
 		/* Fix up the rport accordingly */
 		rport = ndlp->rport;
 		if (rport) {
-- 
2.13.1

  parent reply	other threads:[~2017-08-02 23:38 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-08-02 23:36 [PATCH 00/21] lpfc updates for 11.4.0.3 James Smart
2017-08-02 23:36 ` [PATCH 01/21] lpfc: Fix opps when ExpressLane is enabled James Smart
2017-08-03 10:43   ` Nikola Pajkovsky
2017-08-05  0:36     ` James Smart
2017-08-02 23:36 ` [PATCH 02/21] lpfc: Fix plogi collision that causes illegal state transition James Smart
2017-08-02 23:36 ` [PATCH 03/21] lpfc: Fix loop mode target discovery James Smart
2017-08-02 23:36 ` [PATCH 04/21] lpfc: Fix rediscovery on switch blade pull James Smart
2017-08-02 23:36 ` [PATCH 05/21] lpfc: Fix oops when NVME Target is discovered in a nonNVME environment James Smart
2017-08-02 23:36 ` [PATCH 06/21] lpfc: convert info messages to standard messages James Smart
2017-08-02 23:36 ` [PATCH 07/21] lpfc: Correct return error codes to align with nvme_fc transport James Smart
2017-08-02 23:36 ` [PATCH 08/21] lpfc: Fix handling of FCP and NVME FC4 types in Pt2Pt topology James Smart
2017-08-02 23:36 ` James Smart [this message]
2017-08-02 23:36 ` [PATCH 10/21] lpfc: Fix crash in lpfc nvmet when fc port is reset James Smart
2017-08-02 23:36 ` [PATCH 11/21] lpfc: Fix NVME PRLI handling during RSCN James Smart
2017-08-02 23:36 ` [PATCH 12/21] lpfc: Correct issues with FAWWN and FDISCs James Smart
2017-08-02 23:36 ` [PATCH 13/21] lpfc: Limit amount of work processed in IRQ James Smart
2017-08-02 23:36 ` [PATCH 14/21] lpfc: Fix MRQ > 1 context list handling James Smart
2017-08-02 23:36 ` [PATCH 15/21] lpfc: Fix relative offset error on large nvmet target ios James Smart
2017-08-02 23:36 ` [PATCH 16/21] lpfc: Fix nvme target failure after 2nd adapter reset James Smart
2017-08-02 23:36 ` [PATCH 17/21] lpfc: Fix bad sgl reposting " James Smart
2017-08-02 23:36 ` [PATCH 18/21] lpfc: remove console log clutter James Smart
2017-08-02 23:36 ` [PATCH 19/21] lpfc: Add Buffer to Buffer credit recovery support James Smart
2017-08-02 23:36 ` [PATCH 20/21] lpfc: Add new adapter type 6 support James Smart
2017-08-02 23:36 ` [PATCH 21/21] lpfc: lpfc version bump 11.4.0.3 James Smart

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170802233648.4573-10-jsmart2021@gmail.com \
    --to=jsmart2021@gmail.com \
    --cc=dick.kennedy@broadcom.com \
    --cc=james.smart@broadcom.com \
    --cc=linux-scsi@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox