From: James Smart <jsmart2021@gmail.com>
To: linux-scsi@vger.kernel.org
Cc: Dick Kennedy <dick.kennedy@broadcom.com>,
James Smart <james.smart@broadcom.com>
Subject: [PATCH 06/21] lpfc: convert info messages to standard messages
Date: Wed, 2 Aug 2017 16:36:33 -0700 [thread overview]
Message-ID: <20170802233648.4573-7-jsmart2021@gmail.com> (raw)
In-Reply-To: <20170802233648.4573-1-jsmart2021@gmail.com>
From: Dick Kennedy <dick.kennedy@broadcom.com>
Transitioned some informational discovery messages to now always
be displayed when log_verbose is set.
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
---
drivers/scsi/lpfc/lpfc_ct.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/scsi/lpfc/lpfc_ct.c b/drivers/scsi/lpfc/lpfc_ct.c
index 9c0c1463057d..33417681f5d4 100644
--- a/drivers/scsi/lpfc/lpfc_ct.c
+++ b/drivers/scsi/lpfc/lpfc_ct.c
@@ -955,7 +955,7 @@ lpfc_cmpl_ct_cmd_gft_id(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
CTrsp = (struct lpfc_sli_ct_request *)outp->virt;
fc4_data_0 = be32_to_cpu(CTrsp->un.gft_acc.fc4_types[0]);
fc4_data_1 = be32_to_cpu(CTrsp->un.gft_acc.fc4_types[1]);
- lpfc_printf_vlog(vport, KERN_ERR, LOG_DISCOVERY,
+ lpfc_printf_vlog(vport, KERN_INFO, LOG_DISCOVERY,
"3062 DID x%06x GFT Wd0 x%08x Wd1 x%08x\n",
did, fc4_data_0, fc4_data_1);
@@ -969,7 +969,7 @@ lpfc_cmpl_ct_cmd_gft_id(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
ndlp->nlp_fc4_type |= NLP_FC4_FCP;
if (fc4_data_1 & LPFC_FC4_TYPE_BITMASK)
ndlp->nlp_fc4_type |= NLP_FC4_NVME;
- lpfc_printf_vlog(vport, KERN_ERR, LOG_DISCOVERY,
+ lpfc_printf_vlog(vport, KERN_INFO, LOG_DISCOVERY,
"3064 Setting ndlp %p, DID x%06x with "
"FC4 x%08x, Data: x%08x x%08x\n",
ndlp, did, ndlp->nlp_fc4_type,
--
2.13.1
next prev parent reply other threads:[~2017-08-02 23:37 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-08-02 23:36 [PATCH 00/21] lpfc updates for 11.4.0.3 James Smart
2017-08-02 23:36 ` [PATCH 01/21] lpfc: Fix opps when ExpressLane is enabled James Smart
2017-08-03 10:43 ` Nikola Pajkovsky
2017-08-05 0:36 ` James Smart
2017-08-02 23:36 ` [PATCH 02/21] lpfc: Fix plogi collision that causes illegal state transition James Smart
2017-08-02 23:36 ` [PATCH 03/21] lpfc: Fix loop mode target discovery James Smart
2017-08-02 23:36 ` [PATCH 04/21] lpfc: Fix rediscovery on switch blade pull James Smart
2017-08-02 23:36 ` [PATCH 05/21] lpfc: Fix oops when NVME Target is discovered in a nonNVME environment James Smart
2017-08-02 23:36 ` James Smart [this message]
2017-08-02 23:36 ` [PATCH 07/21] lpfc: Correct return error codes to align with nvme_fc transport James Smart
2017-08-02 23:36 ` [PATCH 08/21] lpfc: Fix handling of FCP and NVME FC4 types in Pt2Pt topology James Smart
2017-08-02 23:36 ` [PATCH 09/21] lpfc: Fix duplicate NVME rport entries and namespaces James Smart
2017-08-02 23:36 ` [PATCH 10/21] lpfc: Fix crash in lpfc nvmet when fc port is reset James Smart
2017-08-02 23:36 ` [PATCH 11/21] lpfc: Fix NVME PRLI handling during RSCN James Smart
2017-08-02 23:36 ` [PATCH 12/21] lpfc: Correct issues with FAWWN and FDISCs James Smart
2017-08-02 23:36 ` [PATCH 13/21] lpfc: Limit amount of work processed in IRQ James Smart
2017-08-02 23:36 ` [PATCH 14/21] lpfc: Fix MRQ > 1 context list handling James Smart
2017-08-02 23:36 ` [PATCH 15/21] lpfc: Fix relative offset error on large nvmet target ios James Smart
2017-08-02 23:36 ` [PATCH 16/21] lpfc: Fix nvme target failure after 2nd adapter reset James Smart
2017-08-02 23:36 ` [PATCH 17/21] lpfc: Fix bad sgl reposting " James Smart
2017-08-02 23:36 ` [PATCH 18/21] lpfc: remove console log clutter James Smart
2017-08-02 23:36 ` [PATCH 19/21] lpfc: Add Buffer to Buffer credit recovery support James Smart
2017-08-02 23:36 ` [PATCH 20/21] lpfc: Add new adapter type 6 support James Smart
2017-08-02 23:36 ` [PATCH 21/21] lpfc: lpfc version bump 11.4.0.3 James Smart
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170802233648.4573-7-jsmart2021@gmail.com \
--to=jsmart2021@gmail.com \
--cc=dick.kennedy@broadcom.com \
--cc=james.smart@broadcom.com \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox