From: James Smart <jsmart2021@gmail.com>
To: linux-scsi@vger.kernel.org
Cc: Dick Kennedy <dick.kennedy@broadcom.com>,
James Smart <james.smart@broadcom.com>
Subject: [PATCH 07/21] lpfc: Correct return error codes to align with nvme_fc transport
Date: Wed, 2 Aug 2017 16:36:34 -0700 [thread overview]
Message-ID: <20170802233648.4573-8-jsmart2021@gmail.com> (raw)
In-Reply-To: <20170802233648.4573-1-jsmart2021@gmail.com>
From: Dick Kennedy <dick.kennedy@broadcom.com>
Modify driver return error codes to align with host nvme transport.
Driver isn't returning Exxx error codes to properly reflect out of
resource or connectivity conditions (-EBUSY), yet there were hard
error conditions returning -EBUSY.
Fix to return:
temporary failures or temporary resource availability: -EBUSY
Connectivity issues: -ENODEV
all others are treated as hard errors and return an -Exxx value
that indicates the type of error.
Also, lpfc_sli4_issue_wqe() was modified to not translate error
from -Exxx to WQE state. This allows lpfc_nvme_fcp_io_submit()
routine to just return whatever -E value was returned from other
routines.
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
---
drivers/scsi/lpfc/lpfc_nvme.c | 9 ++++-----
drivers/scsi/lpfc/lpfc_sli.c | 23 ++++++++++++++---------
2 files changed, 18 insertions(+), 14 deletions(-)
diff --git a/drivers/scsi/lpfc/lpfc_nvme.c b/drivers/scsi/lpfc/lpfc_nvme.c
index 2f50df6a3dca..87e0743c4ace 100644
--- a/drivers/scsi/lpfc/lpfc_nvme.c
+++ b/drivers/scsi/lpfc/lpfc_nvme.c
@@ -364,7 +364,7 @@ lpfc_nvme_gen_req(struct lpfc_vport *vport, struct lpfc_dmabuf *bmp,
genwqe->sli4_xritag, genwqe->iotag, ndlp->nlp_DID);
rc = lpfc_sli4_issue_wqe(phba, LPFC_ELS_RING, genwqe);
- if (rc == WQE_ERROR) {
+ if (rc) {
lpfc_printf_vlog(vport, KERN_ERR, LOG_ELS,
"6045 Issue GEN REQ WQE to NPORT x%x "
"Data: x%x x%x\n",
@@ -1270,7 +1270,7 @@ lpfc_nvme_fcp_io_submit(struct nvme_fc_local_port *pnvme_lport,
* not exceed the programmed depth.
*/
if (atomic_read(&ndlp->cmd_pending) >= ndlp->cmd_qdepth) {
- ret = -EAGAIN;
+ ret = -EBUSY;
goto out_fail;
}
@@ -1279,7 +1279,7 @@ lpfc_nvme_fcp_io_submit(struct nvme_fc_local_port *pnvme_lport,
lpfc_printf_vlog(vport, KERN_INFO, LOG_NVME_IOERR,
"6065 driver's buffer pool is empty, "
"IO failed\n");
- ret = -ENOMEM;
+ ret = -EBUSY;
goto out_fail;
}
#ifdef CONFIG_SCSI_LPFC_DEBUG_FS
@@ -1332,7 +1332,6 @@ lpfc_nvme_fcp_io_submit(struct nvme_fc_local_port *pnvme_lport,
"sid: x%x did: x%x oxid: x%x\n",
ret, vport->fc_myDID, ndlp->nlp_DID,
lpfc_ncmd->cur_iocbq.sli4_xritag);
- ret = -EBUSY;
goto out_free_nvme_buf;
}
@@ -1576,7 +1575,7 @@ lpfc_nvme_fcp_abort(struct nvme_fc_local_port *pnvme_lport,
abts_buf->wqe_cmpl = lpfc_nvme_abort_fcreq_cmpl;
ret_val = lpfc_sli4_issue_wqe(phba, LPFC_FCP_RING, abts_buf);
spin_unlock_irqrestore(&phba->hbalock, flags);
- if (ret_val == IOCB_ERROR) {
+ if (ret_val) {
lpfc_printf_vlog(vport, KERN_ERR, LOG_NVME_ABTS,
"6137 Failed abts issue_wqe with status x%x "
"for nvme_fcreq %p.\n",
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index 0615bf9def23..8476e3d249b0 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -106,7 +106,7 @@ lpfc_get_iocb_from_iocbq(struct lpfc_iocbq *iocbq)
* -ENOMEM.
* The caller is expected to hold the hbalock when calling this routine.
**/
-static uint32_t
+static int
lpfc_sli4_wq_put(struct lpfc_queue *q, union lpfc_wqe *wqe)
{
union lpfc_wqe *temp_wqe;
@@ -123,7 +123,7 @@ lpfc_sli4_wq_put(struct lpfc_queue *q, union lpfc_wqe *wqe)
idx = ((q->host_index + 1) % q->entry_count);
if (idx == q->hba_index) {
q->WQ_overflow++;
- return -ENOMEM;
+ return -EBUSY;
}
q->WQ_posted++;
/* set consumption flag every once in a while */
@@ -10741,7 +10741,7 @@ lpfc_sli4_abort_nvme_io(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
abtsiocbp->vport = vport;
abtsiocbp->wqe_cmpl = lpfc_nvme_abort_fcreq_cmpl;
retval = lpfc_sli4_issue_wqe(phba, LPFC_FCP_RING, abtsiocbp);
- if (retval == IOCB_ERROR) {
+ if (retval) {
lpfc_printf_vlog(vport, KERN_ERR, LOG_NVME,
"6147 Failed abts issue_wqe with status x%x "
"for oxid x%x\n",
@@ -18891,6 +18891,7 @@ lpfc_sli4_issue_wqe(struct lpfc_hba *phba, uint32_t ring_number,
struct lpfc_sglq *sglq;
struct lpfc_sli_ring *pring;
unsigned long iflags;
+ uint32_t ret = 0;
/* NVME_LS and NVME_LS ABTS requests. */
if (pwqe->iocb_flag & LPFC_IO_NVME_LS) {
@@ -18909,10 +18910,12 @@ lpfc_sli4_issue_wqe(struct lpfc_hba *phba, uint32_t ring_number,
}
bf_set(wqe_xri_tag, &pwqe->wqe.xmit_bls_rsp.wqe_com,
pwqe->sli4_xritag);
- if (lpfc_sli4_wq_put(phba->sli4_hba.nvmels_wq, wqe)) {
+ ret = lpfc_sli4_wq_put(phba->sli4_hba.nvmels_wq, wqe);
+ if (ret) {
spin_unlock_irqrestore(&pring->ring_lock, iflags);
- return WQE_ERROR;
+ return ret;
}
+
lpfc_sli_ringtxcmpl_put(phba, pring, pwqe);
spin_unlock_irqrestore(&pring->ring_lock, iflags);
return 0;
@@ -18927,9 +18930,10 @@ lpfc_sli4_issue_wqe(struct lpfc_hba *phba, uint32_t ring_number,
wq = phba->sli4_hba.nvme_wq[pwqe->hba_wqidx];
bf_set(wqe_cqid, &wqe->generic.wqe_com,
phba->sli4_hba.nvme_cq[pwqe->hba_wqidx]->queue_id);
- if (lpfc_sli4_wq_put(wq, wqe)) {
+ ret = lpfc_sli4_wq_put(wq, wqe);
+ if (ret) {
spin_unlock_irqrestore(&pring->ring_lock, iflags);
- return WQE_ERROR;
+ return ret;
}
lpfc_sli_ringtxcmpl_put(phba, pring, pwqe);
spin_unlock_irqrestore(&pring->ring_lock, iflags);
@@ -18953,9 +18957,10 @@ lpfc_sli4_issue_wqe(struct lpfc_hba *phba, uint32_t ring_number,
wq = phba->sli4_hba.nvme_wq[pwqe->hba_wqidx];
bf_set(wqe_cqid, &wqe->generic.wqe_com,
phba->sli4_hba.nvme_cq[pwqe->hba_wqidx]->queue_id);
- if (lpfc_sli4_wq_put(wq, wqe)) {
+ ret = lpfc_sli4_wq_put(wq, wqe);
+ if (ret) {
spin_unlock_irqrestore(&pring->ring_lock, iflags);
- return WQE_ERROR;
+ return ret;
}
lpfc_sli_ringtxcmpl_put(phba, pring, pwqe);
spin_unlock_irqrestore(&pring->ring_lock, iflags);
--
2.13.1
next prev parent reply other threads:[~2017-08-02 23:38 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-08-02 23:36 [PATCH 00/21] lpfc updates for 11.4.0.3 James Smart
2017-08-02 23:36 ` [PATCH 01/21] lpfc: Fix opps when ExpressLane is enabled James Smart
2017-08-03 10:43 ` Nikola Pajkovsky
2017-08-05 0:36 ` James Smart
2017-08-02 23:36 ` [PATCH 02/21] lpfc: Fix plogi collision that causes illegal state transition James Smart
2017-08-02 23:36 ` [PATCH 03/21] lpfc: Fix loop mode target discovery James Smart
2017-08-02 23:36 ` [PATCH 04/21] lpfc: Fix rediscovery on switch blade pull James Smart
2017-08-02 23:36 ` [PATCH 05/21] lpfc: Fix oops when NVME Target is discovered in a nonNVME environment James Smart
2017-08-02 23:36 ` [PATCH 06/21] lpfc: convert info messages to standard messages James Smart
2017-08-02 23:36 ` James Smart [this message]
2017-08-02 23:36 ` [PATCH 08/21] lpfc: Fix handling of FCP and NVME FC4 types in Pt2Pt topology James Smart
2017-08-02 23:36 ` [PATCH 09/21] lpfc: Fix duplicate NVME rport entries and namespaces James Smart
2017-08-02 23:36 ` [PATCH 10/21] lpfc: Fix crash in lpfc nvmet when fc port is reset James Smart
2017-08-02 23:36 ` [PATCH 11/21] lpfc: Fix NVME PRLI handling during RSCN James Smart
2017-08-02 23:36 ` [PATCH 12/21] lpfc: Correct issues with FAWWN and FDISCs James Smart
2017-08-02 23:36 ` [PATCH 13/21] lpfc: Limit amount of work processed in IRQ James Smart
2017-08-02 23:36 ` [PATCH 14/21] lpfc: Fix MRQ > 1 context list handling James Smart
2017-08-02 23:36 ` [PATCH 15/21] lpfc: Fix relative offset error on large nvmet target ios James Smart
2017-08-02 23:36 ` [PATCH 16/21] lpfc: Fix nvme target failure after 2nd adapter reset James Smart
2017-08-02 23:36 ` [PATCH 17/21] lpfc: Fix bad sgl reposting " James Smart
2017-08-02 23:36 ` [PATCH 18/21] lpfc: remove console log clutter James Smart
2017-08-02 23:36 ` [PATCH 19/21] lpfc: Add Buffer to Buffer credit recovery support James Smart
2017-08-02 23:36 ` [PATCH 20/21] lpfc: Add new adapter type 6 support James Smart
2017-08-02 23:36 ` [PATCH 21/21] lpfc: lpfc version bump 11.4.0.3 James Smart
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170802233648.4573-8-jsmart2021@gmail.com \
--to=jsmart2021@gmail.com \
--cc=dick.kennedy@broadcom.com \
--cc=james.smart@broadcom.com \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox