From: James Smart <jsmart2021@gmail.com>
To: linux-scsi@vger.kernel.org
Cc: Dick Kennedy <dick.kennedy@broadcom.com>,
James Smart <james.smart@broadcom.com>
Subject: [PATCH v2 12/21] lpfc: Revise NVME module parameter descriptions for better clarity
Date: Fri, 29 Sep 2017 17:34:38 -0700 [thread overview]
Message-ID: <20170930003447.10747-13-jsmart2021@gmail.com> (raw)
In-Reply-To: <20170930003447.10747-1-jsmart2021@gmail.com>
From: Dick Kennedy <dick.kennedy@broadcom.com>
The descriptions for lpfc_xri_split and lpfc_enable_fc4_type were
poor. Revise for better understanding:
lpfc_xri_split - Percentage of FCP XRI resources versus NVME
lpfc_enable_fc4_type - Enable FC4 Protocol support - FCP / NVME
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
---
drivers/scsi/lpfc/lpfc_attr.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
index f02269b46049..65886646a16f 100644
--- a/drivers/scsi/lpfc/lpfc_attr.c
+++ b/drivers/scsi/lpfc/lpfc_attr.c
@@ -3375,7 +3375,7 @@ LPFC_ATTR_R(nvmet_mrq,
*/
LPFC_ATTR_R(enable_fc4_type, LPFC_ENABLE_FCP,
LPFC_ENABLE_FCP, LPFC_ENABLE_BOTH,
- "Define fc4 type to register with fabric.");
+ "Enable FC4 Protocol support - FCP / NVME");
/*
* lpfc_xri_split: Defines the division of XRI resources between SCSI and NVME
@@ -3391,7 +3391,7 @@ LPFC_ATTR_R(enable_fc4_type, LPFC_ENABLE_FCP,
* percentage will go to NVME.
*/
LPFC_ATTR_R(xri_split, 50, 10, 90,
- "Division of XRI resources between SCSI and NVME");
+ "Percentage of FCP XRI resources versus NVME");
/*
# lpfc_log_verbose: Only turn this flag on if you are willing to risk being
--
2.13.1
next prev parent reply other threads:[~2017-09-30 0:35 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-09-30 0:34 [PATCH v2 00/21] lpfc updates for 11.4.0.4 James Smart
2017-09-30 0:34 ` [PATCH v2 01/21] lpfc: fix pci hot plug crash in timer management routines James Smart
2017-10-02 8:05 ` Johannes Thumshirn
2017-09-30 0:34 ` [PATCH v2 02/21] lpfc: fix pci hot plug crash in list_add call James Smart
2017-10-02 8:06 ` Johannes Thumshirn
2017-09-30 0:34 ` [PATCH v2 03/21] lpfc: Fix crash receiving ELS while detaching driver James Smart
2017-09-30 0:34 ` [PATCH v2 04/21] lpfc: Fix lpfc nvme host rejecting IO with Not Ready message James Smart
2017-09-30 0:34 ` [PATCH v2 05/21] lpfc: Fix warning messages when NVME_TARGET_FC not defined James Smart
2017-09-30 0:34 ` [PATCH v2 06/21] lpfc: PLOGI failures during NPIV testing James Smart
2017-09-30 0:34 ` [PATCH v2 07/21] lpfc: Make ktime sampling more accurate James Smart
2017-10-02 8:08 ` Johannes Thumshirn
2017-09-30 0:34 ` [PATCH v2 08/21] lpfc: Move CQ processing to a soft IRQ James Smart
2017-09-30 0:34 ` [PATCH v2 09/21] lpfc: Fix FCP hba_wqidx assignment James Smart
2017-10-02 8:14 ` Johannes Thumshirn
2017-09-30 0:34 ` [PATCH v2 10/21] lpfc: Reduce log spew on controller reconnects James Smart
2017-09-30 0:34 ` [PATCH v2 11/21] lpfc: Set missing abort context James Smart
2017-09-30 0:34 ` James Smart [this message]
2017-09-30 0:34 ` [PATCH v2 13/21] lpfc: Fix oops if nvmet_fc_register_targetport fails James Smart
2017-09-30 0:34 ` [PATCH v2 14/21] lpfc: Disable NPIV support if NVME is enabled James Smart
2017-09-30 0:34 ` [PATCH v2 15/21] lpfc: Fix crash in lpfc_nvme_fcp_io_submit during LIP James Smart
2017-09-30 0:34 ` [PATCH v2 16/21] lpfc: Fix secure firmware updates James Smart
2017-09-30 0:34 ` [PATCH v2 17/21] lpfc: Ensure io aborts interlocked with the target James Smart
2017-09-30 0:34 ` [PATCH v2 18/21] lpfc: Extend RDP support James Smart
2017-09-30 0:34 ` [PATCH v2 19/21] lpfc: Fix oops of nvme host during driver unload James Smart
2017-10-02 8:28 ` Johannes Thumshirn
2017-09-30 0:34 ` [PATCH v2 20/21] lpfc: correct nvme sg segment count check James Smart
2017-10-02 8:33 ` Johannes Thumshirn
2017-09-30 0:34 ` [PATCH v2 21/21] lpfc: change version to 11.4.0.4 James Smart
2017-10-03 2:45 ` [PATCH v2 00/21] lpfc updates for 11.4.0.4 Martin K. Petersen
2017-10-03 18:13 ` James Smart
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170930003447.10747-13-jsmart2021@gmail.com \
--to=jsmart2021@gmail.com \
--cc=dick.kennedy@broadcom.com \
--cc=james.smart@broadcom.com \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).