From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Gustavo A. R. Silva" Subject: [PATCH] scsi: qla2xxx: remove dead code in qla82xx_write_flash_data Date: Wed, 4 Oct 2017 18:28:08 -0500 Message-ID: <20171004232808.GA31707@embeddedor.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Received: from gateway36.websitewelcome.com ([192.185.192.36]:23677 "EHLO gateway36.websitewelcome.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751201AbdJDXwp (ORCPT ); Wed, 4 Oct 2017 19:52:45 -0400 Received: from cm17.websitewelcome.com (cm17.websitewelcome.com [100.42.49.20]) by gateway36.websitewelcome.com (Postfix) with ESMTP id 9DF2A40765B37 for ; Wed, 4 Oct 2017 18:28:11 -0500 (CDT) Content-Disposition: inline Sender: linux-scsi-owner@vger.kernel.org List-Id: linux-scsi@vger.kernel.org To: qla2xxx-upstream@qlogic.com, "James E.J. Bottomley" , "Martin K. Petersen" Cc: linux-scsi@vger.kernel.org, linux-kernel@vger.kernel.org, "Gustavo A. R. Silva" Local variable page_mode is assigned to a constant value and it is never updated again. Remove this variable and the dead code it guards. Addresses-Coverity-ID: 200420 Addresses-Coverity-ID: 114338 Signed-off-by: Gustavo A. R. Silva --- This code was tested by compilation only. Also, notice that this code has not been updated since 2010. drivers/scsi/qla2xxx/qla_nx.c | 54 ++----------------------------------------- 1 file changed, 2 insertions(+), 52 deletions(-) diff --git a/drivers/scsi/qla2xxx/qla_nx.c b/drivers/scsi/qla2xxx/qla_nx.c index a77c339..d5c3d36 100644 --- a/drivers/scsi/qla2xxx/qla_nx.c +++ b/drivers/scsi/qla2xxx/qla_nx.c @@ -2676,33 +2676,14 @@ qla82xx_write_flash_data(struct scsi_qla_host *vha, uint32_t *dwptr, int ret; uint32_t liter; uint32_t rest_addr; - dma_addr_t optrom_dma; - void *optrom = NULL; - int page_mode = 0; struct qla_hw_data *ha = vha->hw; - ret = -1; - - /* Prepare burst-capable write on supported ISPs. */ - if (page_mode && !(faddr & 0xfff) && - dwords > OPTROM_BURST_DWORDS) { - optrom = dma_alloc_coherent(&ha->pdev->dev, OPTROM_BURST_SIZE, - &optrom_dma, GFP_KERNEL); - if (!optrom) { - ql_log(ql_log_warn, vha, 0xb01b, - "Unable to allocate memory " - "for optrom burst write (%x KB).\n", - OPTROM_BURST_SIZE / 1024); - } - } - rest_addr = ha->fdt_block_size - 1; - ret = qla82xx_unprotect_flash(ha); if (ret) { ql_log(ql_log_warn, vha, 0xb01c, "Unable to unprotect flash for update.\n"); - goto write_done; + return ret; } for (liter = 0; liter < dwords; liter++, faddr += 4, dwptr++) { @@ -2718,34 +2699,6 @@ qla82xx_write_flash_data(struct scsi_qla_host *vha, uint32_t *dwptr, } } - /* Go with burst-write. */ - if (optrom && (liter + OPTROM_BURST_DWORDS) <= dwords) { - /* Copy data to DMA'ble buffer. */ - memcpy(optrom, dwptr, OPTROM_BURST_SIZE); - - ret = qla2x00_load_ram(vha, optrom_dma, - (ha->flash_data_off | faddr), - OPTROM_BURST_DWORDS); - if (ret != QLA_SUCCESS) { - ql_log(ql_log_warn, vha, 0xb01e, - "Unable to burst-write optrom segment " - "(%x/%x/%llx).\n", ret, - (ha->flash_data_off | faddr), - (unsigned long long)optrom_dma); - ql_log(ql_log_warn, vha, 0xb01f, - "Reverting to slow-write.\n"); - - dma_free_coherent(&ha->pdev->dev, - OPTROM_BURST_SIZE, optrom, optrom_dma); - optrom = NULL; - } else { - liter += OPTROM_BURST_DWORDS - 1; - faddr += OPTROM_BURST_DWORDS - 1; - dwptr += OPTROM_BURST_DWORDS - 1; - continue; - } - } - ret = qla82xx_write_flash_dword(ha, faddr, cpu_to_le32(*dwptr)); if (ret) { @@ -2760,10 +2713,7 @@ qla82xx_write_flash_data(struct scsi_qla_host *vha, uint32_t *dwptr, if (ret) ql_log(ql_log_warn, vha, 0xb021, "Unable to protect flash after update.\n"); -write_done: - if (optrom) - dma_free_coherent(&ha->pdev->dev, - OPTROM_BURST_SIZE, optrom, optrom_dma); + return ret; } -- 2.7.4