From: Bart Van Assche <bart.vanassche@wdc.com>
To: Jens Axboe <axboe@kernel.dk>
Cc: linux-block@vger.kernel.org, linux-scsi@vger.kernel.org,
Christoph Hellwig <hch@lst.de>,
"Martin K . Petersen" <martin.petersen@oracle.com>,
Oleksandr Natalenko <oleksandr@natalenko.name>,
Ming Lei <ming.lei@redhat.com>,
Martin Steigerwald <martin@lichtvoll.de>,
Bart Van Assche <bart.vanassche@wdc.com>,
Johannes Thumshirn <jthumshirn@suse.de>
Subject: [PATCH v11 4/7] ide, scsi: Tell the block layer at request allocation time about preempt requests
Date: Mon, 30 Oct 2017 15:42:02 -0700 [thread overview]
Message-ID: <20171030224205.25212-5-bart.vanassche@wdc.com> (raw)
In-Reply-To: <20171030224205.25212-1-bart.vanassche@wdc.com>
Convert blk_get_request(q, op, __GFP_RECLAIM) into
blk_get_request_flags(q, op, BLK_MQ_PREEMPT). This patch does not
change any functionality.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Tested-by: Martin Steigerwald <martin@lichtvoll.de>
Acked-by: David S. Miller <davem@davemloft.net> [ for IDE ]
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
---
drivers/ide/ide-pm.c | 4 ++--
drivers/scsi/scsi_lib.c | 6 +++---
2 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/ide/ide-pm.c b/drivers/ide/ide-pm.c
index 544f02d673ca..f56d742908df 100644
--- a/drivers/ide/ide-pm.c
+++ b/drivers/ide/ide-pm.c
@@ -89,9 +89,9 @@ int generic_ide_resume(struct device *dev)
}
memset(&rqpm, 0, sizeof(rqpm));
- rq = blk_get_request(drive->queue, REQ_OP_DRV_IN, __GFP_RECLAIM);
+ rq = blk_get_request_flags(drive->queue, REQ_OP_DRV_IN,
+ BLK_MQ_REQ_PREEMPT);
ide_req(rq)->type = ATA_PRIV_PM_RESUME;
- rq->rq_flags |= RQF_PREEMPT;
rq->special = &rqpm;
rqpm.pm_step = IDE_PM_START_RESUME;
rqpm.pm_state = PM_EVENT_ON;
diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index 6f10afaca25b..7c119696402c 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -252,9 +252,9 @@ int scsi_execute(struct scsi_device *sdev, const unsigned char *cmd,
struct scsi_request *rq;
int ret = DRIVER_ERROR << 24;
- req = blk_get_request(sdev->request_queue,
+ req = blk_get_request_flags(sdev->request_queue,
data_direction == DMA_TO_DEVICE ?
- REQ_OP_SCSI_OUT : REQ_OP_SCSI_IN, __GFP_RECLAIM);
+ REQ_OP_SCSI_OUT : REQ_OP_SCSI_IN, BLK_MQ_REQ_PREEMPT);
if (IS_ERR(req))
return ret;
rq = scsi_req(req);
@@ -268,7 +268,7 @@ int scsi_execute(struct scsi_device *sdev, const unsigned char *cmd,
rq->retries = retries;
req->timeout = timeout;
req->cmd_flags |= flags;
- req->rq_flags |= rq_flags | RQF_QUIET | RQF_PREEMPT;
+ req->rq_flags |= rq_flags | RQF_QUIET;
/*
* head injection *required* here otherwise quiesce won't work
--
2.14.2
next prev parent reply other threads:[~2017-10-30 22:42 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-10-30 22:41 [PATCH v11 0/7] block, scsi, md: Improve suspend and resume Bart Van Assche
2017-10-30 22:41 ` [PATCH v11 1/7] block: Make q_usage_counter also track legacy requests Bart Van Assche
2017-10-30 22:42 ` [PATCH v11 2/7] block: Introduce blk_get_request_flags() Bart Van Assche
2017-10-30 22:42 ` [PATCH v11 3/7] block: Introduce BLK_MQ_REQ_PREEMPT Bart Van Assche
2017-10-30 22:42 ` Bart Van Assche [this message]
2017-10-30 22:42 ` [PATCH v11 5/7] block: Add the QUEUE_FLAG_PREEMPT_ONLY request queue flag Bart Van Assche
2017-10-30 22:42 ` [PATCH v11 6/7] block, scsi: Make SCSI quiesce and resume work reliably Bart Van Assche
2017-10-30 22:42 ` [PATCH v11 7/7] block, nvme: Introduce blk_mq_req_flags_t Bart Van Assche
2017-11-09 6:16 ` [PATCH v11 0/7] block, scsi, md: Improve suspend and resume Oleksandr Natalenko
2017-11-09 16:54 ` Bart Van Assche
2017-11-09 16:55 ` Jens Axboe
2017-11-09 17:10 ` Oleksandr Natalenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171030224205.25212-5-bart.vanassche@wdc.com \
--to=bart.vanassche@wdc.com \
--cc=axboe@kernel.dk \
--cc=hch@lst.de \
--cc=jthumshirn@suse.de \
--cc=linux-block@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
--cc=martin@lichtvoll.de \
--cc=ming.lei@redhat.com \
--cc=oleksandr@natalenko.name \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox