From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Gustavo A. R. Silva" Subject: [PATCH] scsi: bnx2i: bnx2i_hwi: use swap macro in bnx2i_send_iscsi_nopout Date: Fri, 3 Nov 2017 14:58:39 -0500 Message-ID: <20171103195839.GA23385@embeddedor.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Content-Disposition: inline Sender: linux-kernel-owner@vger.kernel.org To: QLogic-Storage-Upstream@qlogic.com, "James E.J. Bottomley" , "Martin K. Petersen" Cc: linux-scsi@vger.kernel.org, linux-kernel@vger.kernel.org, "Gustavo A. R. Silva" List-Id: linux-scsi@vger.kernel.org Make use of the swap macro and remove unnecessary variable tmp. This makes the code easier to read and maintain. This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva --- drivers/scsi/bnx2i/bnx2i_hwi.c | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-) diff --git a/drivers/scsi/bnx2i/bnx2i_hwi.c b/drivers/scsi/bnx2i/bnx2i_hwi.c index e0640e0..9e3bf53 100644 --- a/drivers/scsi/bnx2i/bnx2i_hwi.c +++ b/drivers/scsi/bnx2i/bnx2i_hwi.c @@ -547,12 +547,9 @@ int bnx2i_send_iscsi_nopout(struct bnx2i_conn *bnx2i_conn, nopout_wqe->op_attr = ISCSI_FLAG_CMD_FINAL; memcpy(nopout_wqe->lun, &nopout_hdr->lun, 8); - if (test_bit(BNX2I_NX2_DEV_57710, &ep->hba->cnic_dev_type)) { - u32 tmp = nopout_wqe->lun[0]; - /* 57710 requires LUN field to be swapped */ - nopout_wqe->lun[0] = nopout_wqe->lun[1]; - nopout_wqe->lun[1] = tmp; - } + /* 57710 requires LUN field to be swapped */ + if (test_bit(BNX2I_NX2_DEV_57710, &ep->hba->cnic_dev_type)) + swap(nopout_wqe->lun[0], nopout_wqe->lun[1]); nopout_wqe->itt = ((u16)task->itt | (ISCSI_TASK_TYPE_MPATH << -- 2.7.4