linux-scsi.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: James Smart <jsmart2021@gmail.com>
To: linux-scsi@vger.kernel.org
Cc: James Smart <jsmart2021@gmail.com>,
	Dick Kennedy <dick.kennedy@broadcom.com>,
	James Smart <james.smart@broadcom.com>
Subject: [PATCH 04/13] lpfc: Add push-to-adapter support to sli4
Date: Fri, 26 Jan 2018 11:31:04 -0800	[thread overview]
Message-ID: <20180126193113.29610-5-jsmart2021@gmail.com> (raw)
In-Reply-To: <20180126193113.29610-1-jsmart2021@gmail.com>

New if_type=6 adapters support and additional BAR that provides
apertures to allow direct WQE to adapter push support - termed
Direct Packet Push (DPP). WQ creation differs slightly to ask for
a WQ to be DPP-ized. When submitting a WQE to a DPP WQ, it is
submitted to the host memory for the WQ normally, but is also
written by the host cpu directly to a BAR aperture.  Write buffer
coalescing in hardware is (hopefully) turned on, enabling single
pci write operation support. The doorbell is thing rung to indicate
the WQE is available and was pushed to the aperture.

This patch:
- Updates the WQ Create commands for the DPP options
- Adds the bar mapping for if_type=6 DPP bar
- Adds the WQE pushing to the DDP aperture received from WQ create
- Adds a new module parameter to disable DPP operation if desired.
  Default is enabled.

Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
---
 drivers/scsi/lpfc/lpfc.h      |   3 +-
 drivers/scsi/lpfc/lpfc_attr.c |  10 ++
 drivers/scsi/lpfc/lpfc_hw4.h  |  31 ++++++
 drivers/scsi/lpfc/lpfc_init.c |  18 ++++
 drivers/scsi/lpfc/lpfc_sli.c  | 234 +++++++++++++++++++++++++++---------------
 drivers/scsi/lpfc/lpfc_sli4.h |  16 ++-
 6 files changed, 225 insertions(+), 87 deletions(-)

diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h
index 9698b9635058..86ffb9756e65 100644
--- a/drivers/scsi/lpfc/lpfc.h
+++ b/drivers/scsi/lpfc/lpfc.h
@@ -840,7 +840,8 @@ struct lpfc_hba {
 	uint32_t cfg_enable_SmartSAN;
 	uint32_t cfg_enable_mds_diags;
 	uint32_t cfg_enable_fc4_type;
-	uint32_t cfg_enable_bbcr;	/*Enable BB Credit Recovery*/
+	uint32_t cfg_enable_bbcr;	/* Enable BB Credit Recovery */
+	uint32_t cfg_enable_dpp;	/* Enable Direct Packet Push */
 	uint32_t cfg_xri_split;
 #define LPFC_ENABLE_FCP  1
 #define LPFC_ENABLE_NVME 2
diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
index 70bd25666243..705c42e724c2 100644
--- a/drivers/scsi/lpfc/lpfc_attr.c
+++ b/drivers/scsi/lpfc/lpfc_attr.c
@@ -5204,6 +5204,14 @@ LPFC_ATTR_R(enable_mds_diags, 0, 0, 1, "Enable MDS Diagnostics");
  */
 LPFC_BBCR_ATTR_RW(enable_bbcr, 1, 0, 1, "Enable BBC Recovery");
 
+/*
+ * lpfc_enable_dpp: Enable DPP on G7
+ *       0  = DPP on G7 disabled
+ *       1  = DPP on G7 enabled (default)
+ * Value range is [0,1]. Default value is 1.
+ */
+LPFC_ATTR_RW(enable_dpp, 1, 0, 1, "Enable Direct Packet Push");
+
 struct device_attribute *lpfc_hba_attrs[] = {
 	&dev_attr_nvme_info,
 	&dev_attr_bg_info,
@@ -5312,6 +5320,7 @@ struct device_attribute *lpfc_hba_attrs[] = {
 	&dev_attr_lpfc_xlane_supported,
 	&dev_attr_lpfc_enable_mds_diags,
 	&dev_attr_lpfc_enable_bbcr,
+	&dev_attr_lpfc_enable_dpp,
 	NULL,
 };
 
@@ -6324,6 +6333,7 @@ lpfc_get_cfgparam(struct lpfc_hba *phba)
 	lpfc_fcp_io_channel_init(phba, lpfc_fcp_io_channel);
 	lpfc_nvme_io_channel_init(phba, lpfc_nvme_io_channel);
 	lpfc_enable_bbcr_init(phba, lpfc_enable_bbcr);
+	lpfc_enable_dpp_init(phba, lpfc_enable_dpp);
 
 	if (phba->sli_rev != LPFC_SLI_REV4) {
 		/* NVME only supported on SLI4 */
diff --git a/drivers/scsi/lpfc/lpfc_hw4.h b/drivers/scsi/lpfc/lpfc_hw4.h
index 93fd9fd10a0f..60ccff6fa8b0 100644
--- a/drivers/scsi/lpfc/lpfc_hw4.h
+++ b/drivers/scsi/lpfc/lpfc_hw4.h
@@ -1372,6 +1372,15 @@ struct lpfc_mbx_wq_create {
 #define lpfc_mbx_wq_create_page_size_MASK	0x000000FF
 #define lpfc_mbx_wq_create_page_size_WORD	word1
 #define LPFC_WQ_PAGE_SIZE_4096	0x1
+#define lpfc_mbx_wq_create_dpp_req_SHIFT	15
+#define lpfc_mbx_wq_create_dpp_req_MASK		0x00000001
+#define lpfc_mbx_wq_create_dpp_req_WORD		word1
+#define lpfc_mbx_wq_create_doe_SHIFT		14
+#define lpfc_mbx_wq_create_doe_MASK		0x00000001
+#define lpfc_mbx_wq_create_doe_WORD		word1
+#define lpfc_mbx_wq_create_toe_SHIFT		13
+#define lpfc_mbx_wq_create_toe_MASK		0x00000001
+#define lpfc_mbx_wq_create_toe_WORD		word1
 #define lpfc_mbx_wq_create_wqe_size_SHIFT	8
 #define lpfc_mbx_wq_create_wqe_size_MASK	0x0000000F
 #define lpfc_mbx_wq_create_wqe_size_WORD	word1
@@ -1400,6 +1409,28 @@ struct lpfc_mbx_wq_create {
 #define lpfc_mbx_wq_create_db_format_MASK	0x0000FFFF
 #define lpfc_mbx_wq_create_db_format_WORD	word2
 		} response;
+		struct {
+			uint32_t word0;
+#define lpfc_mbx_wq_create_dpp_rsp_SHIFT	31
+#define lpfc_mbx_wq_create_dpp_rsp_MASK		0x00000001
+#define lpfc_mbx_wq_create_dpp_rsp_WORD		word0
+#define lpfc_mbx_wq_create_v1_q_id_SHIFT	0
+#define lpfc_mbx_wq_create_v1_q_id_MASK		0x0000FFFF
+#define lpfc_mbx_wq_create_v1_q_id_WORD		word0
+			uint32_t word1;
+#define lpfc_mbx_wq_create_v1_bar_set_SHIFT	0
+#define lpfc_mbx_wq_create_v1_bar_set_MASK	0x0000000F
+#define lpfc_mbx_wq_create_v1_bar_set_WORD	word1
+			uint32_t doorbell_offset;
+			uint32_t word3;
+#define lpfc_mbx_wq_create_dpp_id_SHIFT		16
+#define lpfc_mbx_wq_create_dpp_id_MASK		0x0000001F
+#define lpfc_mbx_wq_create_dpp_id_WORD		word3
+#define lpfc_mbx_wq_create_dpp_bar_SHIFT	0
+#define lpfc_mbx_wq_create_dpp_bar_MASK		0x0000000F
+#define lpfc_mbx_wq_create_dpp_bar_WORD		word3
+			uint32_t dpp_offset;
+		} response_1;
 	} u;
 };
 
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index 4e19a5c45fed..0b8381876ed8 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -9611,6 +9611,24 @@ lpfc_sli4_pci_mem_setup(struct lpfc_hba *phba)
 		}
 	}
 
+	if ((if_type == LPFC_SLI_INTF_IF_TYPE_6) &&
+	    (pci_resource_start(pdev, PCI_64BIT_BAR4))) {
+		/*
+		 * Map SLI4 if type 6 HBA DPP Register base to a kernel
+		 * virtual address and setup the registers.
+		 */
+		phba->pci_bar2_map = pci_resource_start(pdev, PCI_64BIT_BAR4);
+		bar2map_len = pci_resource_len(pdev, PCI_64BIT_BAR4);
+		phba->sli4_hba.dpp_regs_memmap_p =
+				ioremap(phba->pci_bar2_map, bar2map_len);
+		if (!phba->sli4_hba.dpp_regs_memmap_p) {
+			dev_err(&pdev->dev,
+			   "ioremap failed for SLI4 HBA dpp registers.\n");
+			goto out_iounmap_ctrl;
+		}
+		phba->pci_bar4_memmap_p = phba->sli4_hba.dpp_regs_memmap_p;
+	}
+
 	/* Set up the EQ/CQ register handeling functions now */
 	switch (if_type) {
 	case LPFC_SLI_INTF_IF_TYPE_0:
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index 3bff1f9c5df7..1b07e61fb7bd 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -35,6 +35,9 @@
 #include <scsi/scsi_transport_fc.h>
 #include <scsi/fc/fc_fs.h>
 #include <linux/aer.h>
+#ifdef CONFIG_X86
+#include <asm/set_memory.h>
+#endif
 
 #include <linux/nvme-fc-driver.h>
 
@@ -112,6 +115,8 @@ lpfc_sli4_wq_put(struct lpfc_queue *q, union lpfc_wqe *wqe)
 	struct lpfc_register doorbell;
 	uint32_t host_index;
 	uint32_t idx;
+	uint32_t i = 0;
+	uint8_t *tmp;
 
 	/* sanity check on queue memory */
 	if (unlikely(!q))
@@ -133,7 +138,18 @@ lpfc_sli4_wq_put(struct lpfc_queue *q, union lpfc_wqe *wqe)
 	if (q->phba->sli3_options & LPFC_SLI4_PHWQ_ENABLED)
 		bf_set(wqe_wqid, &wqe->generic.wqe_com, q->queue_id);
 	lpfc_sli_pcimem_bcopy(wqe, temp_wqe, q->entry_size);
-	/* ensure WQE bcopy flushed before doorbell write */
+	if (q->dpp_enable && q->phba->cfg_enable_dpp) {
+		/* write to DPP aperture taking advatage of Combined Writes */
+		tmp = (uint8_t *)wqe;
+#ifdef CONFIG_64BIT
+		for (i = 0; i < q->entry_size; i += sizeof(uint64_t))
+			writeq(*((uint64_t *)(tmp + i)), q->dpp_regaddr + i);
+#else
+		for (i = 0; i < q->entry_size; i += sizeof(uint32_t))
+			writel(*((uint32_t *)(tmp + i)), q->dpp_regaddr + i);
+#endif
+	}
+	/* ensure WQE bcopy and DPP flushed before doorbell write */
 	wmb();
 
 	/* Update the host index before invoking device */
@@ -144,9 +160,18 @@ lpfc_sli4_wq_put(struct lpfc_queue *q, union lpfc_wqe *wqe)
 	/* Ring Doorbell */
 	doorbell.word0 = 0;
 	if (q->db_format == LPFC_DB_LIST_FORMAT) {
-		bf_set(lpfc_wq_db_list_fm_num_posted, &doorbell, 1);
-		bf_set(lpfc_wq_db_list_fm_index, &doorbell, host_index);
-		bf_set(lpfc_wq_db_list_fm_id, &doorbell, q->queue_id);
+		if (q->dpp_enable && q->phba->cfg_enable_dpp) {
+			bf_set(lpfc_if6_wq_db_list_fm_num_posted, &doorbell, 1);
+			bf_set(lpfc_if6_wq_db_list_fm_dpp, &doorbell, 1);
+			bf_set(lpfc_if6_wq_db_list_fm_dpp_id, &doorbell,
+			    q->dpp_id);
+			bf_set(lpfc_if6_wq_db_list_fm_id, &doorbell,
+			    q->queue_id);
+		} else {
+			bf_set(lpfc_wq_db_list_fm_num_posted, &doorbell, 1);
+			bf_set(lpfc_wq_db_list_fm_index, &doorbell, host_index);
+			bf_set(lpfc_wq_db_list_fm_id, &doorbell, q->queue_id);
+		}
 	} else if (q->db_format == LPFC_DB_RING_FORMAT) {
 		bf_set(lpfc_wq_db_ring_fm_num_posted, &doorbell, 1);
 		bf_set(lpfc_wq_db_ring_fm_id, &doorbell, q->queue_id);
@@ -15023,6 +15048,9 @@ lpfc_wq_create(struct lpfc_hba *phba, struct lpfc_queue *wq,
 	void __iomem *bar_memmap_p;
 	uint32_t db_offset;
 	uint16_t pci_barset;
+	uint8_t dpp_barset;
+	uint32_t dpp_offset;
+	unsigned long pg_addr;
 	uint8_t wq_create_version;
 
 	/* sanity check on queue memory */
@@ -15056,38 +15084,13 @@ lpfc_wq_create(struct lpfc_hba *phba, struct lpfc_queue *wq,
 	else
 		wq_create_version = LPFC_Q_CREATE_VERSION_0;
 
-	switch (wq_create_version) {
-	case LPFC_Q_CREATE_VERSION_0:
-		switch (wq->entry_size) {
-		default:
-		case 64:
-			/* Nothing to do, version 0 ONLY supports 64 byte */
-			page = wq_create->u.request.page;
-			break;
-		case 128:
-			if (!(phba->sli4_hba.pc_sli4_params.wqsize &
-			    LPFC_WQ_SZ128_SUPPORT)) {
-				status = -ERANGE;
-				goto out;
-			}
-			/* If we get here the HBA MUST also support V1 and
-			 * we MUST use it
-			 */
-			bf_set(lpfc_mbox_hdr_version, &shdr->request,
-			       LPFC_Q_CREATE_VERSION_1);
 
-			bf_set(lpfc_mbx_wq_create_wqe_count,
-			       &wq_create->u.request_1, wq->entry_count);
-			bf_set(lpfc_mbx_wq_create_wqe_size,
-			       &wq_create->u.request_1,
-			       LPFC_WQ_WQE_SIZE_128);
-			bf_set(lpfc_mbx_wq_create_page_size,
-			       &wq_create->u.request_1,
-			       LPFC_WQ_PAGE_SIZE_4096);
-			page = wq_create->u.request_1.page;
-			break;
-		}
-		break;
+	if (phba->sli4_hba.pc_sli4_params.wqsize & LPFC_WQ_SZ128_SUPPORT)
+		wq_create_version = LPFC_Q_CREATE_VERSION_1;
+	else
+		wq_create_version = LPFC_Q_CREATE_VERSION_0;
+
+	switch (wq_create_version) {
 	case LPFC_Q_CREATE_VERSION_1:
 		bf_set(lpfc_mbx_wq_create_wqe_count, &wq_create->u.request_1,
 		       wq->entry_count);
@@ -15102,24 +15105,21 @@ lpfc_wq_create(struct lpfc_hba *phba, struct lpfc_queue *wq,
 			       LPFC_WQ_WQE_SIZE_64);
 			break;
 		case 128:
-			if (!(phba->sli4_hba.pc_sli4_params.wqsize &
-				LPFC_WQ_SZ128_SUPPORT)) {
-				status = -ERANGE;
-				goto out;
-			}
 			bf_set(lpfc_mbx_wq_create_wqe_size,
 			       &wq_create->u.request_1,
 			       LPFC_WQ_WQE_SIZE_128);
 			break;
 		}
+		/* Request DPP by default */
+		bf_set(lpfc_mbx_wq_create_dpp_req, &wq_create->u.request_1, 1);
 		bf_set(lpfc_mbx_wq_create_page_size,
 		       &wq_create->u.request_1,
 		       (wq->page_size / SLI4_PAGE_SIZE));
 		page = wq_create->u.request_1.page;
 		break;
 	default:
-		status = -ERANGE;
-		goto out;
+		page = wq_create->u.request.page;
+		break;
 	}
 
 	list_for_each_entry(dmabuf, &wq->page_list, list) {
@@ -15143,52 +15143,120 @@ lpfc_wq_create(struct lpfc_hba *phba, struct lpfc_queue *wq,
 		status = -ENXIO;
 		goto out;
 	}
-	wq->queue_id = bf_get(lpfc_mbx_wq_create_q_id, &wq_create->u.response);
+
+	if (wq_create_version == LPFC_Q_CREATE_VERSION_0)
+		wq->queue_id = bf_get(lpfc_mbx_wq_create_q_id,
+					&wq_create->u.response);
+	else
+		wq->queue_id = bf_get(lpfc_mbx_wq_create_v1_q_id,
+					&wq_create->u.response_1);
+
 	if (wq->queue_id == 0xFFFF) {
 		status = -ENXIO;
 		goto out;
 	}
-	if (phba->sli4_hba.fw_func_mode & LPFC_DUA_MODE) {
-		wq->db_format = bf_get(lpfc_mbx_wq_create_db_format,
-				       &wq_create->u.response);
-		if ((wq->db_format != LPFC_DB_LIST_FORMAT) &&
-		    (wq->db_format != LPFC_DB_RING_FORMAT)) {
-			lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
-					"3265 WQ[%d] doorbell format not "
-					"supported: x%x\n", wq->queue_id,
-					wq->db_format);
-			status = -EINVAL;
-			goto out;
-		}
-		pci_barset = bf_get(lpfc_mbx_wq_create_bar_set,
-				    &wq_create->u.response);
-		bar_memmap_p = lpfc_dual_chute_pci_bar_map(phba, pci_barset);
-		if (!bar_memmap_p) {
-			lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
-					"3263 WQ[%d] failed to memmap pci "
-					"barset:x%x\n", wq->queue_id,
-					pci_barset);
-			status = -ENOMEM;
-			goto out;
-		}
-		db_offset = wq_create->u.response.doorbell_offset;
-		if ((db_offset != LPFC_ULP0_WQ_DOORBELL) &&
-		    (db_offset != LPFC_ULP1_WQ_DOORBELL)) {
-			lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
-					"3252 WQ[%d] doorbell offset not "
-					"supported: x%x\n", wq->queue_id,
-					db_offset);
-			status = -EINVAL;
-			goto out;
-		}
-		wq->db_regaddr = bar_memmap_p + db_offset;
-		lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
-				"3264 WQ[%d]: barset:x%x, offset:x%x, "
-				"format:x%x\n", wq->queue_id, pci_barset,
-				db_offset, wq->db_format);
+
+	wq->db_format = LPFC_DB_LIST_FORMAT;
+	if (wq_create_version == LPFC_Q_CREATE_VERSION_0) {
+		if (phba->sli4_hba.fw_func_mode & LPFC_DUA_MODE) {
+			wq->db_format = bf_get(lpfc_mbx_wq_create_db_format,
+					       &wq_create->u.response);
+			if ((wq->db_format != LPFC_DB_LIST_FORMAT) &&
+			    (wq->db_format != LPFC_DB_RING_FORMAT)) {
+				lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+						"3265 WQ[%d] doorbell format "
+						"not supported: x%x\n",
+						wq->queue_id, wq->db_format);
+				status = -EINVAL;
+				goto out;
+			}
+			pci_barset = bf_get(lpfc_mbx_wq_create_bar_set,
+					    &wq_create->u.response);
+			bar_memmap_p = lpfc_dual_chute_pci_bar_map(phba,
+								   pci_barset);
+			if (!bar_memmap_p) {
+				lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+						"3263 WQ[%d] failed to memmap "
+						"pci barset:x%x\n",
+						wq->queue_id, pci_barset);
+				status = -ENOMEM;
+				goto out;
+			}
+			db_offset = wq_create->u.response.doorbell_offset;
+			if ((db_offset != LPFC_ULP0_WQ_DOORBELL) &&
+			    (db_offset != LPFC_ULP1_WQ_DOORBELL)) {
+				lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+						"3252 WQ[%d] doorbell offset "
+						"not supported: x%x\n",
+						wq->queue_id, db_offset);
+				status = -EINVAL;
+				goto out;
+			}
+			wq->db_regaddr = bar_memmap_p + db_offset;
+			lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+					"3264 WQ[%d]: barset:x%x, offset:x%x, "
+					"format:x%x\n", wq->queue_id,
+					pci_barset, db_offset, wq->db_format);
+		} else
+			wq->db_regaddr = phba->sli4_hba.WQDBregaddr;
 	} else {
-		wq->db_format = LPFC_DB_LIST_FORMAT;
-		wq->db_regaddr = phba->sli4_hba.WQDBregaddr;
+		/* Check if DPP was honored by the firmware */
+		wq->dpp_enable = bf_get(lpfc_mbx_wq_create_dpp_rsp,
+				    &wq_create->u.response_1);
+		if (wq->dpp_enable) {
+			pci_barset = bf_get(lpfc_mbx_wq_create_v1_bar_set,
+					    &wq_create->u.response_1);
+			bar_memmap_p = lpfc_dual_chute_pci_bar_map(phba,
+								   pci_barset);
+			if (!bar_memmap_p) {
+				lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+						"3267 WQ[%d] failed to memmap "
+						"pci barset:x%x\n",
+						wq->queue_id, pci_barset);
+				status = -ENOMEM;
+				goto out;
+			}
+			db_offset = wq_create->u.response_1.doorbell_offset;
+			wq->db_regaddr = bar_memmap_p + db_offset;
+			wq->dpp_id = bf_get(lpfc_mbx_wq_create_dpp_id,
+					    &wq_create->u.response_1);
+			dpp_barset = bf_get(lpfc_mbx_wq_create_dpp_bar,
+					    &wq_create->u.response_1);
+			bar_memmap_p = lpfc_dual_chute_pci_bar_map(phba,
+								   dpp_barset);
+			if (!bar_memmap_p) {
+				lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+						"3268 WQ[%d] failed to memmap "
+						"pci barset:x%x\n",
+						wq->queue_id, dpp_barset);
+				status = -ENOMEM;
+				goto out;
+			}
+			dpp_offset = wq_create->u.response_1.dpp_offset;
+			wq->dpp_regaddr = bar_memmap_p + dpp_offset;
+			lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+					"3271 WQ[%d]: barset:x%x, offset:x%x, "
+					"dpp_id:x%x dpp_barset:x%x "
+					"dpp_offset:x%x\n",
+					wq->queue_id, pci_barset, db_offset,
+					wq->dpp_id, dpp_barset, dpp_offset);
+
+			/* Enable combined writes for DPP aperture */
+			pg_addr = (unsigned long)(wq->dpp_regaddr) & PAGE_MASK;
+#ifdef CONFIG_X86
+			rc = set_memory_wc(pg_addr, 1);
+			if (rc) {
+				lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+						"3272 Cannot setup Combined "
+						"Write on WQ[%d] - disable DPP\n",
+						wq->queue_id);
+				phba->cfg_enable_dpp = 0;
+			}
+#else
+			phba->cfg_enable_dpp = 0;
+#endif
+		} else
+			wq->db_regaddr = phba->sli4_hba.WQDBregaddr;
 	}
 	wq->pring = kzalloc(sizeof(struct lpfc_sli_ring), GFP_KERNEL);
 	if (wq->pring == NULL) {
diff --git a/drivers/scsi/lpfc/lpfc_sli4.h b/drivers/scsi/lpfc/lpfc_sli4.h
index 33838b4b28d9..708167b309bd 100644
--- a/drivers/scsi/lpfc/lpfc_sli4.h
+++ b/drivers/scsi/lpfc/lpfc_sli4.h
@@ -180,6 +180,10 @@ struct lpfc_queue {
 	uint8_t q_flag;
 #define HBA_NVMET_WQFULL	0x1 /* We hit WQ Full condition for NVMET */
 	void __iomem *db_regaddr;
+	uint16_t dpp_enable;
+	uint16_t dpp_id;
+	void __iomem *dpp_regaddr;
+
 	/* For q stats */
 	uint32_t q_cnt_1;
 	uint32_t q_cnt_2;
@@ -524,11 +528,17 @@ struct lpfc_vector_map_info {
 /* SLI4 HBA data structure entries */
 struct lpfc_sli4_hba {
 	void __iomem *conf_regs_memmap_p; /* Kernel memory mapped address for
-					     PCI BAR0, config space registers */
+					   * config space registers
+					   */
 	void __iomem *ctrl_regs_memmap_p; /* Kernel memory mapped address for
-					     PCI BAR1, control registers */
+					   * control registers
+					   */
 	void __iomem *drbl_regs_memmap_p; /* Kernel memory mapped address for
-					     PCI BAR2, doorbell registers */
+					   * doorbell registers
+					   */
+	void __iomem *dpp_regs_memmap_p;  /* Kernel memory mapped address for
+					   * dpp registers
+					   */
 	union {
 		struct {
 			/* IF Type 0, BAR 0 PCI cfg space reg mem map */
-- 
2.13.1

  parent reply	other threads:[~2018-01-26 19:31 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-01-26 19:31 [PATCH 00/13] lpfc new hardware patches for 12.0.0.0 James Smart
2018-01-26 19:31 ` [PATCH 01/13] lpfc: Rework lpfc to allow different sli4 cq and eq handlers James Smart
2018-02-07  0:26   ` Martin K. Petersen
2018-02-07  2:01     ` James Smart
2018-01-26 19:31 ` [PATCH 02/13] lpfc: Rework sli4 doorbell infrastructure James Smart
2018-01-26 19:31 ` [PATCH 03/13] lpfc: Add SLI-4 if_type=6 support to the code base James Smart
2018-01-26 19:31 ` James Smart [this message]
2018-02-07  0:27   ` [PATCH 04/13] lpfc: Add push-to-adapter support to sli4 Martin K. Petersen
2018-01-26 19:31 ` [PATCH 05/13] lpfc: Add PCI Ids for if_type=6 hardware James Smart
2018-01-26 19:31 ` [PATCH 06/13] lpfc: Add 64G link speed support James Smart
2018-01-29 11:45   ` Steffen Maier
2018-01-29 18:32     ` James Smart
2018-01-26 19:31 ` [PATCH 07/13] lpfc: Add if_type=6 support for cycling valid bits James Smart
2018-02-07  0:28   ` Martin K. Petersen
2018-01-26 19:31 ` [PATCH 08/13] lpfc: Enable fw download on if_type=6 devices James Smart
2018-01-26 19:31 ` [PATCH 09/13] lpfc: Add embedded data pointers for enhanced performance James Smart
2018-01-26 19:31 ` [PATCH 10/13] lpfc: Fix nvme embedded io length on new hardware James Smart
2018-01-26 19:31 ` [PATCH 11/13] lpfc: Work around NVME cmd iu SGL type James Smart
2018-01-26 19:31 ` [PATCH 12/13] lpfc: update driver version to 12.0.0.0 James Smart
2018-01-26 19:31 ` [PATCH 13/13] lpfc: Update 12.0.0.0 modified files for 2018 Copyright James Smart

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180126193113.29610-5-jsmart2021@gmail.com \
    --to=jsmart2021@gmail.com \
    --cc=dick.kennedy@broadcom.com \
    --cc=james.smart@broadcom.com \
    --cc=linux-scsi@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).