[PATCH v2 0/3] scsi: aacraid: Multi controller Kdump IOP reset handling

[PATCH v2 0/3] scsi: aacraid: Multi controller Kdump IOP reset handling

[Raghava Aditya Renukunta]

During Kdump aacraid controller IOP reset is invoked, IOP reset
takes approx 40 seconds to bring the controller back up and running.
with timeout of 120 seconds and anything more than 2 controllers
will cause kdump to timeout.

This patchset implements a new reset mechanism called DropIO, that
induces the fw to drop any pending IO in the fw and making the reset
process quicker.

Changes in v2:
Respun patchset against Linus Master
Added Dave Carroll's reviewed-by tags

Raghava Aditya Renukunta (3):
  scsi: aacraid: Implement DropIO sync command
  scsi: aacraid: Preserve MSIX mode in the OMR register
  scsi: aacraid: Auto detect INTx or MSIx mode during sync cmd
    processing

 drivers/scsi/aacraid/aacraid.h |   5 +
 drivers/scsi/aacraid/src.c     | 205 ++++++++++++++++++++++++++++++++++++++---
 2 files changed, 198 insertions(+), 12 deletions(-)

-- 
2.9.4

[PATCH v2 1/3] scsi: aacraid: Implement DropIO sync command

[Raghava Aditya Renukunta]

IOP_RESET takes longer time to complete, if controller
is in a state where we can bring it back with init struct,
controller DropIO sync command is implemented.

 - If controller is faulted perform standard IOP_RESET in aac_srcv_init.
 - If controller is not faulted get adapter properties and extended
   properties.
 - Update the sa_firmware variable and determine if DropIO request is
   supported.
 - Issue DropIO request, and get the number of outstanding commands.
 - If all commands are complete with success (CT_OK), consider IOP_RESET
   is complete.
 - If any commands timeout, Perform the IOP_RESET.

Signed-off-by: Prasad B Munirathnam <prasad.munirathnam@microsemi.com>
Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
Reviewed-by: Dave Carroll <david.carroll@microsemi.com>

---
Changes in V2:
Re based on Linus Master

 drivers/scsi/aacraid/aacraid.h |   4 +
 drivers/scsi/aacraid/src.c     | 161 +++++++++++++++++++++++++++++++++++++++--
 2 files changed, 159 insertions(+), 6 deletions(-)

diff --git a/drivers/scsi/aacraid/aacraid.h b/drivers/scsi/aacraid/aacraid.h
index 0095fcb..c3fdec9 100644
--- a/drivers/scsi/aacraid/aacraid.h
+++ b/drivers/scsi/aacraid/aacraid.h
@@ -1528,6 +1528,7 @@ struct aac_bus_info_response {
 #define AAC_COMM_MESSAGE_TYPE3		5
 
 #define AAC_EXTOPT_SA_FIRMWARE		cpu_to_le32(1<<1)
+#define AAC_EXTOPT_SOFT_RESET		cpu_to_le32(1<<16)
 
 /* MSIX context */
 struct aac_msix_ctx {
@@ -1662,6 +1663,7 @@ struct aac_dev
 	u8			raw_io_64;
 	u8			printf_enabled;
 	u8			in_reset;
+	u8			in_soft_reset;
 	u8			msi;
 	u8			sa_firmware;
 	int			management_fib_count;
@@ -2504,6 +2506,7 @@ struct aac_hba_info {
 #define RCV_TEMP_READINGS		0x00000025
 #define GET_COMM_PREFERRED_SETTINGS	0x00000026
 #define IOP_RESET_FW_FIB_DUMP		0x00000034
+#define DROP_IO			0x00000035
 #define IOP_RESET			0x00001000
 #define IOP_RESET_ALWAYS		0x00001001
 #define RE_INIT_ADAPTER		0x000000ee
@@ -2539,6 +2542,7 @@ struct aac_hba_info {
 #define	FLASH_UPD_PENDING		0x00002000
 #define	FLASH_UPD_SUCCESS		0x00004000
 #define	FLASH_UPD_FAILED		0x00008000
+#define	INVALID_OMR			0xffffffff
 #define	FWUPD_TIMEOUT			(5 * 60)
 
 /*
diff --git a/drivers/scsi/aacraid/src.c b/drivers/scsi/aacraid/src.c
index fde6b6a..de48845 100644
--- a/drivers/scsi/aacraid/src.c
+++ b/drivers/scsi/aacraid/src.c
@@ -255,7 +255,8 @@ static int src_sync_cmd(struct aac_dev *dev, u32 command,
 	 */
 	src_writel(dev, MUnit.IDR, INBOUNDDOORBELL_0 << SRC_IDR_SHIFT);
 
-	if (!dev->sync_mode || command != SEND_SYNCHRONOUS_FIB) {
+	if ((!dev->sync_mode || command != SEND_SYNCHRONOUS_FIB) &&
+		!dev->in_soft_reset) {
 		ok = 0;
 		start = jiffies;
 
@@ -992,6 +993,148 @@ int aac_src_init(struct aac_dev *dev)
 	return -1;
 }
 
+static int aac_src_wait_sync(struct aac_dev *dev, int *status)
+{
+	unsigned long start = jiffies;
+	unsigned long usecs = 0;
+	int delay = 5 * HZ;
+	int rc = 1;
+
+	while (time_before(jiffies, start+delay)) {
+		/*
+		 * Delay 5 microseconds to let Mon960 get info.
+		 */
+		udelay(5);
+
+		/*
+		 * Mon960 will set doorbell0 bit when it has completed the
+		 * command.
+		 */
+		if (aac_src_get_sync_status(dev) & OUTBOUNDDOORBELL_0) {
+			/*
+			 * Clear: the doorbell.
+			 */
+			if (dev->msi_enabled)
+				aac_src_access_devreg(dev, AAC_CLEAR_SYNC_BIT);
+			else
+				src_writel(dev, MUnit.ODR_C,
+					OUTBOUNDDOORBELL_0 << SRC_ODR_SHIFT);
+			rc = 0;
+
+			break;
+		}
+
+		/*
+		 * Yield the processor in case we are slow
+		 */
+		usecs = 1 * USEC_PER_MSEC;
+		usleep_range(usecs, usecs + 50);
+	}
+	/*
+	 * Pull the synch status from Mailbox 0.
+	 */
+	if (status && !rc) {
+		status[0] = readl(&dev->IndexRegs->Mailbox[0]);
+		status[1] = readl(&dev->IndexRegs->Mailbox[1]);
+		status[2] = readl(&dev->IndexRegs->Mailbox[2]);
+		status[3] = readl(&dev->IndexRegs->Mailbox[3]);
+		status[4] = readl(&dev->IndexRegs->Mailbox[4]);
+	}
+
+	return rc;
+}
+
+/**
+ *  aac_src_soft_reset	-	perform soft reset to speed up
+ *  access
+ *
+ *  Assumptions: That the controller is in a state where we can
+ *  bring it back to life with an init struct. We can only use
+ *  fast sync commands, as the timeout is 5 seconds.
+ *
+ *  @dev: device to configure
+ *
+ */
+
+static int aac_src_soft_reset(struct aac_dev *dev)
+{
+	u32 status_omr = src_readl(dev, MUnit.OMR);
+	u32 status[5];
+	int rc = 1;
+	int state = 0;
+	char *state_str[7] = {
+		"GET_ADAPTER_PROPERTIES Failed",
+		"GET_ADAPTER_PROPERTIES timeout",
+		"SOFT_RESET not supported",
+		"DROP_IO Failed",
+		"DROP_IO timeout",
+		"Check Health failed"
+	};
+
+	if (status_omr == INVALID_OMR)
+		return 1;       // pcie hosed
+
+	if (!(status_omr & KERNEL_UP_AND_RUNNING))
+		return 1;       // not up and running
+
+	/*
+	 * We go into soft reset mode to allow us to handle response
+	 */
+	dev->in_soft_reset = 1;
+	dev->msi_enabled = status_omr & AAC_INT_MODE_MSIX;
+
+	/* Get adapter properties */
+	rc = aac_adapter_sync_cmd(dev, GET_ADAPTER_PROPERTIES, 0, 0, 0,
+		0, 0, 0, status+0, status+1, status+2, status+3, status+4);
+	if (rc)
+		goto out;
+
+	state++;
+	if (aac_src_wait_sync(dev, status)) {
+		rc = 1;
+		goto out;
+	}
+
+	state++;
+	if (!(status[1] & le32_to_cpu(AAC_OPT_EXTENDED) &&
+		(status[4] & le32_to_cpu(AAC_EXTOPT_SOFT_RESET)))) {
+		rc = 2;
+		goto out;
+	}
+
+	if ((status[1] & le32_to_cpu(AAC_OPT_EXTENDED)) &&
+		(status[4] & le32_to_cpu(AAC_EXTOPT_SA_FIRMWARE)))
+		dev->sa_firmware = 1;
+
+	state++;
+	rc = aac_adapter_sync_cmd(dev, DROP_IO, 0, 0, 0, 0, 0, 0,
+		 status+0, status+1, status+2, status+3, status+4);
+
+	if (rc)
+		goto out;
+
+	state++;
+	if (aac_src_wait_sync(dev, status)) {
+		rc = 3;
+		goto out;
+	}
+
+	if (status[1])
+		dev_err(&dev->pdev->dev, "%s: %d outstanding I/O pending\n",
+			__func__, status[1]);
+
+	state++;
+	rc = aac_src_check_health(dev);
+
+out:
+	dev->in_soft_reset = 0;
+	dev->msi_enabled = 0;
+	if (rc)
+		dev_err(&dev->pdev->dev, "%s: %s status = %d", __func__,
+			state_str[state], rc);
+
+return rc;
+}
 /**
  *  aac_srcv_init	-	initialize an SRCv card
  *  @dev: device to configure
@@ -1021,8 +1164,10 @@ int aac_srcv_init(struct aac_dev *dev)
 
 	if (dev->init_reset) {
 		dev->init_reset = false;
-		if (!aac_src_restart_adapter(dev, 0, IOP_HWSOFT_RESET))
+		if (aac_src_soft_reset(dev)) {
+			aac_src_restart_adapter(dev, 0, IOP_HWSOFT_RESET);
 			++restart;
+		}
 	}
 
 	/*
@@ -1072,13 +1217,16 @@ int aac_srcv_init(struct aac_dev *dev)
 		printk(KERN_ERR "%s%d: adapter monitor panic.\n", dev->name, instance);
 		goto error_iounmap;
 	}
+
 	start = jiffies;
 	/*
 	 *	Wait for the adapter to be up and running. Wait up to 3 minutes
 	 */
-	while (!((status = src_readl(dev, MUnit.OMR)) &
-		KERNEL_UP_AND_RUNNING) ||
-		status == 0xffffffff) {
+	do {
+		status = src_readl(dev, MUnit.OMR);
+		if (status == INVALID_OMR)
+			status = 0;
+
 		if ((restart &&
 		  (status & (KERNEL_PANIC|SELF_TEST_FAILED|MONITOR_PANIC))) ||
 		  time_after(jiffies, start+HZ*startup_timeout)) {
@@ -1098,7 +1246,8 @@ int aac_srcv_init(struct aac_dev *dev)
 			++restart;
 		}
 		msleep(1);
-	}
+	} while (!(status & KERNEL_UP_AND_RUNNING));
+
 	if (restart && aac_commit)
 		aac_commit = 1;
 	/*
-- 
2.9.4

[PATCH v2 2/3] scsi: aacraid: Preserve MSIX mode in the OMR register

[Raghava Aditya Renukunta]

Preserve the current MSIX mode value in the OMR before
rewriting the OMR to initiate the IOP or Soft Reset.

Signed-off-by: Prasad B Munirathnam <prasad.munirathnam@microsemi.com>
Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
Reviewed-by: Dave Carroll <david.carroll@microsemi.com>

---
Changes in V2:
Re based on Linus Master

 drivers/scsi/aacraid/src.c | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

diff --git a/drivers/scsi/aacraid/src.c b/drivers/scsi/aacraid/src.c
index de48845..09b82d3 100644
--- a/drivers/scsi/aacraid/src.c
+++ b/drivers/scsi/aacraid/src.c
@@ -680,6 +680,25 @@ void aac_set_intx_mode(struct aac_dev *dev)
 	}
 }
 
+static void aac_clear_omr(struct aac_dev *dev)
+{
+	u32 omr_value = 0;
+
+	omr_value = src_readl(dev, MUnit.OMR);
+
+	/*
+	 * Check for PCI Errors or Kernel Panic
+	 */
+	if ((omr_value == INVALID_OMR) || (omr_value & KERNEL_PANIC))
+		omr_value = 0;
+
+	/*
+	 * Preserve MSIX Value if any
+	 */
+	src_writel(dev, MUnit.OMR, omr_value & AAC_INT_MODE_MSIX);
+	src_readl(dev, MUnit.OMR);
+}
+
 static void aac_dump_fw_fib_iop_reset(struct aac_dev *dev)
 {
 	__le32 supported_options3;
@@ -740,6 +759,8 @@ static void aac_send_iop_reset(struct aac_dev *dev)
 
 	aac_set_intx_mode(dev);
 
+	aac_clear_omr(dev);
+
 	src_writel(dev, MUnit.IDR, IOP_SRC_RESET_MASK);
 
 	msleep(5000);
@@ -749,6 +770,7 @@ static void aac_send_hardware_soft_reset(struct aac_dev *dev)
 {
 	u_int32_t val;
 
+	aac_clear_omr(dev);
 	val = readl(((char *)(dev->base) + IBW_SWR_OFFSET));
 	val |= 0x01;
 	writel(val, ((char *)(dev->base) + IBW_SWR_OFFSET));
-- 
2.9.4

[PATCH v2 3/3] scsi: aacraid: Auto detect INTx or MSIx mode during sync cmd processing

[Raghava Aditya Renukunta]

During sync command processing if legacy INTx status indicates
command is not completed, sample the MSIx register and check if
it indicates command completion, set controller MSIx enabled flag.

Signed-off-by: Prasad B Munirathnam <prasad.munirathnam@microsemi.com>
Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
Reviewed-by: Dave Carroll <david.carroll@microsemi.com>

---
Changes in V2:
Re based on Linus Master

 drivers/scsi/aacraid/aacraid.h |  1 +
 drivers/scsi/aacraid/src.c     | 22 ++++++++++++++++------
 2 files changed, 17 insertions(+), 6 deletions(-)

diff --git a/drivers/scsi/aacraid/aacraid.h b/drivers/scsi/aacraid/aacraid.h
index c3fdec9..29bf1e6 100644
--- a/drivers/scsi/aacraid/aacraid.h
+++ b/drivers/scsi/aacraid/aacraid.h
@@ -1231,6 +1231,7 @@ struct src_registers {
 
 #define SRC_ODR_SHIFT		12
 #define SRC_IDR_SHIFT		9
+#define SRC_MSI_READ_MASK	0x1000
 
 typedef void (*fib_callback)(void *ctxt, struct fib *fibctx);
 
diff --git a/drivers/scsi/aacraid/src.c b/drivers/scsi/aacraid/src.c
index 09b82d3..3122389f 100644
--- a/drivers/scsi/aacraid/src.c
+++ b/drivers/scsi/aacraid/src.c
@@ -1405,13 +1405,23 @@ void aac_src_access_devreg(struct aac_dev *dev, int mode)
 
 static int aac_src_get_sync_status(struct aac_dev *dev)
 {
+	int msix_val = 0;
+	int legacy_val = 0;
 
-	int val;
+	msix_val = src_readl(dev, MUnit.ODR_MSI) & SRC_MSI_READ_MASK ? 1 : 0;
 
-	if (dev->msi_enabled)
-		val = src_readl(dev, MUnit.ODR_MSI) & 0x1000 ? 1 : 0;
-	else
-		val = src_readl(dev, MUnit.ODR_R) >> SRC_ODR_SHIFT;
+	if (!dev->msi_enabled) {
+		/*
+		 * if Legacy int status indicates cmd is not complete
+		 * sample MSIx register to see if it indiactes cmd complete,
+		 * if yes set the controller in MSIx mode and consider cmd
+		 * completed
+		 */
+		legacy_val = src_readl(dev, MUnit.ODR_R) >> SRC_ODR_SHIFT;
+		if (!(legacy_val & 1) && msix_val)
+			dev->msi_enabled = 1;
+		return legacy_val;
+	}
 
-	return val;
+	return msix_val;
 }
-- 
2.9.4

Re: [PATCH v2 0/3] scsi: aacraid: Multi controller Kdump IOP reset handling

[Martin K. Petersen]

Raghava,

> During Kdump aacraid controller IOP reset is invoked, IOP reset
> takes approx 40 seconds to bring the controller back up and running.
> with timeout of 120 seconds and anything more than 2 controllers
> will cause kdump to timeout.
>
> This patchset implements a new reset mechanism called DropIO, that
> induces the fw to drop any pending IO in the fw and making the reset
> process quicker.

Applied to 4.17/scsi-queue. Thanks for rebasing!

-- 
Martin K. Petersen	Oracle Linux Engineering