Re: 4.15.14 crash with iscsi target and dvd

[Wakko Warner <wakko@animx.eu.org>]

Bart Van Assche wrote:
> On Sat, 2018-03-31 at 18:12 -0400, Wakko Warner wrote:
> > Richard Weinberger wrote:
> > > On Sat, Mar 31, 2018 at 3:59 AM, Wakko Warner <wakko@animx.eu.org> wrote:
> > > > I reported this before but noone responded.
> > > 
> > > Because you're sending only to LKML.
> > > CC'ing storage folks.
> > 
> > Thank you.  I wasn't sure who I needed to send it to.
> 
> Can you share the output of lsscsi? I would like to know whether or not you
> are using a (S)ATA CDROM.

>From the target:
[4:0:0:0]    cd/dvd  ATAPI    iHAS224   B      GL05  /dev/sr0 
[5:0:0:0]    cd/dvd  ATAPI    iHAS422   8      4L11  /dev/sr1 
[6:0:0:0]    cd/dvd  PBDS     DVD+-RW DH-16W1S 2D14  /dev/sr2 

>From the initiator:
[19:0:0:0]   cd/dvd  ATAPI    iHAS224   B      GL05  /dev/sr1
[19:0:0:1]   cd/dvd  ATAPI    iHAS422   8      4L11  /dev/sr2
[19:0:0:2]   cd/dvd  PBDS     DVD+-RW DH-16W1S 2D14  /dev/sr3


I tested 4.14.32 last night with the same oops.  4.9.91 works fine.
>From the initiator, if I do cat /dev/sr1 > /dev/null it works.  If I mount
/dev/sr1 and then do find -type f | xargs cat > /dev/null the target
crashes.  I'm using the builtin iscsi target with pscsi.  I can burn from
the initiator with out problems.  I'll test other kernels between 4.9 and
4.14.