public inbox for linux-scsi@vger.kernel.org
 help / color / mirror / Atom feed
From: Wakko Warner <wakko@animx.eu.org>
To: Bart Van Assche <Bart.VanAssche@wdc.com>
Cc: "linux-scsi@vger.kernel.org" <linux-scsi@vger.kernel.org>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	"richard.weinberger@gmail.com" <richard.weinberger@gmail.com>,
	"linux-block@vger.kernel.org" <linux-block@vger.kernel.org>
Subject: Re: 4.15.14 crash with iscsi target and dvd
Date: Fri, 6 Apr 2018 19:42:38 -0400	[thread overview]
Message-ID: <20180406234237.GA6043@animx.eu.org> (raw)
In-Reply-To: <fb0640c203409a84ab1bfbbc41078a5416138ad2.camel@wdc.com>

Bart Van Assche wrote:
> On Thu, 2018-04-05 at 22:06 -0400, Wakko Warner wrote:
> > I know now why scsi_print_command isn't doing anything.  cmd->cmnd is null.
> > I added a dev_printk in scsi_print_command where the 2 if statements return.
> > Logs:
> > [  29.866415] sr 3:0:0:0: cmd->cmnd is NULL
> 
> That's something that should never happen. As one can see in
> scsi_setup_scsi_cmnd() and scsi_setup_fs_cmnd() both functions initialize
> that pointer. Since I have not yet been able to reproduce myself what you
> reported, would it be possible for you to bisect this issue? You will need
> to follow something like the following procedure (see also
> https://git-scm.com/docs/git-bisect):

I don't know how relevent it is, but this machine boots nfs and exports it's
dvd drives over iscsi with the target modules.  My scsi_target.lio is at the
end.  I removed the iqn name.  The options are default except for a few. 
Non default options I tabbed over.
eth0 is the nfs/localnet nic and eth1 is the
nic that iscsi goes over.
eth0 is onboard pci 8086:1502 (subsystem 1028:05d3)
eth1 is pci 8086:107d (subsystem 8086:1084)
Both use the e1000e driver

The initiator is running 4.4.107.
When running on the initiator, /dev/sr1 is the target /dev/sr0.  Therefor
cat /dev/sr1 > /dev/null seems to work.
mount /dev/sr1 /cdrom works
find /cdrom -type f | xargs cat > /dev/null immediately crashes the target.
Burning to /dev/sr1 seems to work.

I have another nic that uses igb instead, I'll see if that makes a
difference.

> git clone git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
> git bisect start
> git bisect bad v4.10
> git bisect good v4.9
> 
> and then build the kernel, install it, boot the kernel and test it.
> Depending on the result, run either git bisect bad or git bisect good and
> keep going until git bisect comes to a conclusion. This can take an hour or
> more.

I'll try this.

Here's my scsi_target.lio:
storage pscsi {
	disk dvd0 {
	path /dev/sr0 
attribute {
emulate_3pc yes 
emulate_caw yes 
emulate_dpo no 
emulate_fua_read no 
emulate_model_alias no 
emulate_rest_reord no 
emulate_tas yes 
emulate_tpu no 
emulate_tpws no 
emulate_ua_intlck_ctrl no 
emulate_write_cache no 
enforce_pr_isids yes 
fabric_max_sectors 8192 
is_nonrot yes 
max_unmap_block_desc_count 0 
max_unmap_lba_count 0 
max_write_same_len 65535 
queue_depth 128 
unmap_granularity 0 
unmap_granularity_alignment 0 
}
}
	disk dvd1 {
	path /dev/sr1 
attribute {
emulate_3pc yes 
emulate_caw yes 
emulate_dpo no 
emulate_fua_read no 
emulate_model_alias no 
emulate_rest_reord no 
emulate_tas yes 
emulate_tpu no 
emulate_tpws no 
emulate_ua_intlck_ctrl no 
emulate_write_cache no 
enforce_pr_isids yes 
fabric_max_sectors 8192 
is_nonrot yes 
max_unmap_block_desc_count 0 
max_unmap_lba_count 0 
max_write_same_len 65535 
queue_depth 128 
unmap_granularity 0 
unmap_granularity_alignment 0 
}
}
	disk dvd2 {
	path /dev/sr2 
attribute {
emulate_3pc yes 
emulate_caw yes 
emulate_dpo no 
emulate_fua_read no 
emulate_model_alias no 
emulate_rest_reord no 
emulate_tas yes 
emulate_tpu no 
emulate_tpws no 
emulate_ua_intlck_ctrl no 
emulate_write_cache no 
enforce_pr_isids yes 
fabric_max_sectors 8192 
is_nonrot yes 
max_unmap_block_desc_count 0 
max_unmap_lba_count 0 
max_write_same_len 65535 
queue_depth 128 
unmap_granularity 0 
unmap_granularity_alignment 0 
}
}
}
fabric iscsi {
discovery_auth {
enable no 
mutual_password "" 
mutual_userid "" 
password "" 
userid "" 
}
	target iqn.<myiqn>:dvd tpgt 1 {
enable yes 
attribute {
	authentication no 
cache_dynamic_acls yes 
default_cmdsn_depth 64 
default_erl 0 
demo_mode_discovery yes 
	demo_mode_write_protect no 
fabric_prot_type 0 
	generate_node_acls yes 
login_timeout 15 
netif_timeout 2 
prod_mode_write_protect no 
t10_pi 0 
tpg_enabled_sendtargets 1 
}
auth {
password "" 
password_mutual "" 
userid "" 
userid_mutual "" 
}
parameter {
AuthMethod "CHAP,None" 
DataDigest "CRC32C,None" 
DataPDUInOrder yes 
DataSequenceInOrder yes 
DefaultTime2Retain 20 
DefaultTime2Wait 2 
ErrorRecoveryLevel no 
FirstBurstLength 65536 
HeaderDigest "CRC32C,None" 
IFMarkInt Reject 
IFMarker no 
ImmediateData yes 
InitialR2T yes 
MaxBurstLength 262144 
MaxConnections 1 
MaxOutstandingR2T 1 
MaxRecvDataSegmentLength 8192 
MaxXmitDataSegmentLength 262144 
OFMarkInt Reject 
OFMarker no 
TargetAlias "LIO Target" 
}
	lun 0 backend pscsi:dvd0 
	lun 1 backend pscsi:dvd1 
	lun 2 backend pscsi:dvd2 
	portal 0.0.0.0:3260 
}
}


-- 
 Microsoft has beaten Volkswagen's world record.  Volkswagen only created 22
 million bugs.

  reply	other threads:[~2018-04-06 23:42 UTC|newest]

Thread overview: 32+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <20180331015903.GA29398@animx.eu.org>
2018-03-31 21:08 ` 4.15.14 crash with iscsi target and dvd Richard Weinberger
2018-03-31 22:12   ` Wakko Warner
2018-04-01  3:40     ` Bart Van Assche
2018-04-01 11:37       ` Wakko Warner
2018-04-01 15:02         ` Bart Van Assche
2018-04-01 16:24           ` Wakko Warner
2018-04-01 16:51             ` Bart Van Assche
2018-04-01 16:36         ` Wakko Warner
2018-04-01 18:27           ` Wakko Warner
2018-04-03 17:03             ` Bart Van Assche
2018-04-05  0:26               ` Wakko Warner
2018-04-06  1:46               ` Wakko Warner
2018-04-06  2:06                 ` Wakko Warner
2018-04-06  2:20                   ` Bart Van Assche
2018-04-06 23:42                     ` Wakko Warner [this message]
2018-04-07  1:03                     ` Wakko Warner
2018-04-07  2:06                       ` Bart Van Assche
2018-04-07 16:53                     ` Wakko Warner
2018-04-07 17:08                       ` Wakko Warner
2018-04-07 17:09                       ` Bart Van Assche
2018-04-08 16:02                         ` Wakko Warner
2018-04-08 16:15                           ` Wakko Warner
2018-04-09 21:30                           ` Bart Van Assche
2018-04-09 23:34                             ` Ming Lei
2018-04-09 23:43                               ` Wakko Warner
2018-04-09 23:51                                 ` Ming Lei
2018-04-11  0:45                               ` Wakko Warner
2018-04-12  0:52                                 ` Wakko Warner
2018-04-12 10:07                                 ` Ming Lei
2018-04-13  1:43                                   ` Wakko Warner
2018-04-13  1:55                                     ` Ming Lei
2018-04-14 21:34                                       ` Wakko Warner

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180406234237.GA6043@animx.eu.org \
    --to=wakko@animx.eu.org \
    --cc=Bart.VanAssche@wdc.com \
    --cc=linux-block@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-scsi@vger.kernel.org \
    --cc=richard.weinberger@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox